Conducting of balance work for construction of 0.20 lac gallons Slow Sand filtration plant , C.W sump, Laying and fitting of pipes providing of chain link fencing around various structures / pump house at Bikamnar WSS Bikamnar.

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed.

All kinds of Soil

Ordinary rock

Providing and laying stone soliing hand packed. Including all carriages.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incuding all carriages of material.

Providing and laying of PCC (1:2:4) mix stone agg. 20 mm excluding cost of earth work upto plinth level. Including all carriages.

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)in foundation and plinth. incuding all carriages of material.

In suspended floors.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more including all carriages of material.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Kiln seasoned and chemically treated hollock wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 35 mm thick.12 mm thick Fire retardant plywood conforming to IS: 5509

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.Kiln seasoned & chemically treated hollock wood. (35 mm)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge. Kiln seasoned and chemically treated hollock wood. (30 mm)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc

Providing and fixing glass panes incl. Wooden Beadings complete.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed inposition :Kiln seasoned and chemically treated hollock wood

C.G.I. SHEETS ROOFING Providing corrugated G. S. sheet roofing including vertical/curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter withbitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface)excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheetsfixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gram/m

Providing and fixing of eves boarding incl. All carriages . (0.63 mm)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Structural steel wire fixed with plates incl. Cutting , hoisting and fixing in position , applying of one coat of steel primer , including all carriages and headload upto site of work.

Providing and fixing G.I. chain link fabric fencing of required width inmesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm

Form work Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Edges of slabs and breaks in floors and walls Under 20 cm wide

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Providing and fixing of sluice valve ISI Zolto make including all cost of flanges , fixing and labour complete job. (100 mm dia)

150 mm dia sluice valve

100 mm dia sluice valve

80 mm dia sluice valve

Providing and fixing of 12 mm thick M.S flanges to G.I pipe including all costs of flanges , welding labour etc excluding cost of pipe.

100 mm dia pipe .

80 mm dia pipe

Fabricating of G.I bends of required angle and shape including all required flanges , tail peices and fixing complete job including nuts , bolts , electric welding, including all carriages . Complete job.

100 mm dia pipe .

80 mm dia pipe

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand)

Providing and fixing white vitreous china water closet squatting pan (Indian type) Long pattern W.C. pan of size 580 mm

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 liter capacity – coloured

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) (15 mm)

Providing and fixing of 01 no PVC water storage tank including all costs of fittings complete job.

Providing and fixing of PP pipe ISI.

100 mm dia PVC pipe

75 mm dia PVC pipe

100 mm dia Bend

80 mm dia bend

100 mm dia ............

75 mm dia ..........

100 mm dia coller

75 mm dia coller

32 mm dia PVC waste pipe

100 mm dia ............

Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings Size 450x300x150mm

Providing and fixing of wall mixer.

Providing and fixing of Basin mixer

Providing and fixing of n water seyser (50 ltrs) inlcuding all inlet / outlet connections.

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore

Conducting of electrification to pump house.

lighting points with 2.5 mm wire incl. All switch and led lamps complete job.

Heating points with 4 mm wire including all switch and sockets complete .

P/F of central board with MCB/Isolators 10 points central board unit . Complete.

Construction of soakage pit including all cost of earth work excavation , P/F of pre caust RCC rigsincluding all cost of lid etc.

Providing and fixing of filter media to Slow sand filtration plant including all carriages upto site of work.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing and fixing of main hole cover. 12x12.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thicknessto be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Laying and fitting of G.I pipes

25 mm dia G.I pipe

20 mm dia G.I pipe

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete

15mm to 40 mm dia nominal bore

Applying priming coat:With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works

Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specifications Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm ofapproved brand and manufacture

Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specificationsTwo or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm

EXTERIOR FINISHING Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm)

SYED SAJAD HUSSAIN