CERTAIN REPAIR TO FENCING, WALL, DRAINS, CULVERTS, PATH, HARDSTANDING AND FENCING POSTS AT VARIOUSE LOCATIONS OF TECH AND DOMESTIC AREA AT AF STATION CHANDIGARH UNDER GE(AF) CHANDIGARH.

Excavating in trenches as in soft loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out, complete all as specified and directed by Engrineer-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested, complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point , complete all as specified and directed by Engineer-in-Charge.

Plain cement concrete (1:4:8), type D-2, using 40 mm graded mechanically crushed stone aggregates as in sub base ,foundations, filling and mass concrete, in and including demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removal of rubbish outside MoD land , complete all as specified and directed by Engineer-in-Charge.

Plain Cement concrete75 mm thick type B-2, 1:2:4 by using 40mm graded mechanically crushed stone aggregate as in floor/hardstanding etc ,laid in panels of approved size and finishing the surfaces of concrete topping even and rough (without using extra cement) in and including demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removal of rubbish outside MoD land , complete all as specified and directed by Engineer-in-Charge. Note :- Quoted rates are inclusive of use and waste of formwork and to devide the area in panels.

Plain cement concrete, 75 mm thick (1:4:8), type D-2, using 40 mm graded mechanically crushed stone aggregates and finished the surface rough to provide adequate bond for the topping as in sub base ,foundations, filling and mass concrete in and including demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removal of rubbish outside MoD land ,complete all as specified and directed by Engineer-in-Charge.

Plain cement concrete, 100 mm thick (1:4:8), type D-2, using 40 mm graded mechanically crushed stone aggregates and finished the surface rough to provide adequate bond for the topping as in sub base ,foundations, filling and mass concrete in and including demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removal of rubbish outside MoD land ,complete all as specified and directed by Engineer-in-Charge.

Plain cement concrete (1:2:4) type B-1 using 20 mm graded mechanically crushed stone aggregates as in mud stop ,sides of intetlocking paver block and the like including rounded or chamfered on edges and finishing the surfaces of concrete even and smooth (without using extra cement)ncluding necessary form work in and including demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removal of rubbish outside MoD land , complete all as specified and directed by Engineer-in-Charge.

Providing and laying 60mm thick factory made machine pressed interlocking paver block of M-35 grade of shape and size confirming to IS 15658-2006 of approved colour,design & pattern laid over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra in and including dismantling of stone slabs and tiles of any description or thickness laid dry or with mortar and pointed and removal of rubbish outside MoD land , complete all as specified and directed by Engineer-in-Charge. Notes :(i) Design ,color and Pattern shall be as approved by GE/Engineer-in- Charge. (ii) Quoted rates are inclusive of fine sand and nothing extra shall be admissible on this account.

Providing and laying 80mm thick factory made machine pressed interlocking paver block of M-40 grade of shape and size confirming to IS 15658-2006 of approved colour,design & pattern laid over and including 25 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra in and including dismantling of stone slabs and tiles of any description or thickness laid dry or with mortar and pointed and removal of rubbish outside MoD land , complete all as specified and directed by Engineer-in-Charge. Notes :(i) Design ,color and Pattern shall be as approved by GE/Engineer-in- Charge. (ii) Quoted rates are inclusive of fine sand and nothing extra shall be admissible on this account.