RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Metal Bunk Beds ( 1008 pieces ) Technical Specifications 1/17 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Configuration Supported by four poles ( one at each corner of bed ) – a ladder (used to get to upper bed ) – upper bed surrounded by railing (to prevent the sleeper from falling out) * Type of bunk beds 2 – Tier bunk beds ( Fixed ) 2 – Tier bunk beds ( Fixed ) Railing/guard rail at upper bed Fixed Fixed Tail board With With Shape of tail board Rectangular Rectangular Head rest With With Shape of headrest Rectangular Rectangular Provision of under storage No under storage provision No under storage provision Number of Drawers No Drawer No Drawer Number of box No Box No Box Provision for mosquito net hanging rod Detachable Detachable Position of ladder From width side of bed * Number of steps in ladder 3 Nos. * Components assembly With support of screws With support of screws Type of welding MIG (Metal inert gas - Gas Metal Arc Welding) * Provision of mattress panel With With Support member (jointed with frame) for mattress panel Widthwise * Number of Support members for mattress panel 5 Nos. 5 Nos. Mode of supply Knocked Down - To Be Assembled At Knocked Down - To Be Assembled At 2/17 Consignee Site By The Seller Consignee Site By The Seller Approximate Weight in Kg(To be declared) - * MATERIAL Structure of metal bed frame including legs and head/tails railing/supporting structure MS hollow box rectangular or square sections MS hollow box rectangular or square sections Vertical leg structure sections Tube of size 37.5 mm X 50 mm with 1.2 mm wall thickness Tube of size 37.5 mm X 50 mm with 1.2 mm wall thickness Supporting structure of horizontals sections Tube of size 50 mm X 25 mm with 1.2 mm wall thickness Tube of size 50 mm X 25 mm with 1.2 mm wall thickness Other joining horizontal structure sections Tube of size 25 mm X 25 mm with 1.2 mm wall thickness Tube of size 25 mm X 25 mm with 1.2 mm wall thickness Stair rail sections ( For upper level ) Tube of size 50 mm X 25 mm with 1.2 mm wall thickness Tube of size 50 mm X 25 mm with 1.2 mm wall thickness Stair step sections Tube of size 25 mm X 25 mm with 1.2 mm wall thickness Tube of size 25 mm X 25 mm with 1.2 mm wall thickness Material of mattress panel Plywood Plywood Thickness of mattress panel (if other than CRCA sheet) 12 mm 12 mm Upper bed support rail sections Tube of size 50 mm X 25 mm with 1.2 mm wall thickness Tube of size 50 mm X 25 mm with 1.2 mm wall thickness Head board sections Tube of size 50 mm X 25 mm and 25 mm X 25 mm with 1.2 mm wall thickness Tube of size 50 mm X 25 mm and 25 mm X 25 mm with 1.2 mm wall thickness Tail board sections Tube of size 50 mm X 25 mm and 25 mm X 25 mm with 1.2 mm wall thickness Tube of size 50 mm X 25 mm and 25 mm X 25 mm with 1.2 mm wall thickness DIMENSION Length of entire structure + 10 mm 2056 mm 2056 mm Width of entire structure + 10 mm 915 mm 915 mm Height of entire structure – excluding Mosquito net holding rods (minimum 1600 mm 1600 mm 3/17 ceiling clearance to be 760 mm) + 10 mm Actual length of bed 1980 mm 1980 mm Actual width of bed 915 mm 915 mm Height of lower tier (Buyer should be careful while selecting keeping in mind minimum ceiling clearance as required ideally 760 mm minimum) 400 mm 400 mm Guard rail height (+/- 5 MM) 260 mm 260 mm Gap between beds 915 mm 915 mm Size of drawers (To be declared by Buyer- Write NA if not applicable) - * Size of Boxes(To be declared by Buyer- Write NA if not applicable) - * Width of ladder 305 mm * Height of head board (To be declared by Buyer-Write NA if not applicable) - * Height of tail board(To be declared by Buyer- Write NA if not applicable) - * Details of Mosquito net holding rods (To be declared by Buyer – Write NA if not applicable) - * COLOUR & FINISH Paint/Finish of Metal parts Powder Coating Powder Coating Finish of head board Tail board Powder Coating Powder Coating Min Powder/paint coating thickness (Micron) 60 microns 60 microns Colour of bed (Metal Frame) Black * WARRANTY Warranty period 1 - Year 1 - Year 4/17 CERTIFICATION Test reports to be furnished to buyer on demand YES * OEM of offered product is ISO 9001:2015 certified YES * OEM of offered product is ISO 14001:2015 certified YES * OEM of offered product is ISO 18001:2007 certified YES * Product having BIFMA certification YES * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
