Repair to Steel furniture at Vasco under GE Gomantak Vasco

Amount

A) Removal of following existing unserviceable following components of various furniture items given below carefully without disturbing the adjoining parts and supply &fixing new components confirming to IS and as approved as mention below. Apart from BSO furniture yard the repairs will also be carried out in various units as and when required after tightening the joints,placing every part in tact, as per drgs and as directed by Engineer-in-Charge.

Almirah Large Steel 1/2X1/2S Half Hanging Half Shelf /Cadet steel (FD-114 (M), FD/E6/MAP/18, WDF-49/07,1033)

a) locking Assembly with Iron plate & 2 rod 10 mm and lock cover as per drg

b) Handle as per drg

c) Leg as per drg

d) Door as per drg

e) Shelf as per drg

f) 6 Lever Lock as per drg

g) Looking mirror as per drg

h) spot Welding the joints not exceeding 25 mm in length including painting the welded parts to match with existing as per drg

i) Hinges as per drg

Almirah Large Steel with shelves/Glazed (FD-67(M), FD-1031,FD-104 (M))

a) locking Assembly with Iron plate & 2 rod 10 mm and lock cover.

b) Handle as per drg

c) Leg as per drg

d) Door as per drg

e) Shelf as per drg

f) 6 Lever Lock as per drg

g) Looking mirror as per drg

h) spot Welding the joints including painting the welded parts to match with existing as per drg

i) Hinges as per drg

Almirah Steel Medium with shelves (FD-1032, FD-67(M), FD-243)

a) locking Assembly with Iron plate & 2 rod 10 mm and lock cover.

b) Handle as per drg

c) Leg as per drg

d) Door as per drg

e) Shelf as per drg

f) 6 Lever Lock as per drg

g) spot Welding the joints including painting the welded parts to match with existing as per drg

h) Hinges as per drg

Almirah Steel Medium Half Hanging Half Shelf (FD-1034)

a) 3-Way locking system as per drg

b) Handle as per drg

c) Leg as per drg

d) Door as per drg

e) Shelf as per drg

f) 6 Lever Lock as per drg

g) spot Welding the joints including painting the welded parts to match with existing as per drg

i) Hinges as per drg

Locker Steel/Locker steel 6 units (FD 1029/FD-167(M), WDF-19/07,WDF/18/07/GE/G/F/04/2000)

a) Handle as per drg

b) Leg as per drg

c) Door as per drg

d) Shelf as per drg

e) Hasp & Staple as per drg

f) spot Welding the joints including painting the welded parts to match with existing as per drg

g) Aluminium rod 20 mm dia as per drg

h) Hinges as per drg

Book Case Steel/ book shelf open large steel (FD-90(M),,FD-1012,FD-1028,FD-69(M),237,356,69(M))

a) New Glass as per size and Drg

b) Handle as per drg

c) MS Lock as per drg

d) shelf as per drg

e) door shutter as per drg

f) Welding the joints including painting the welded parts to match with existing as per drg

Bed Hard with steel Frame (FD/E6/MAP/08 (R))

a) 12mm thick ISI Marked BWR plywood as per size and drg

b) Legs as per drg

c) Upper Long Rail as per drg

d) Upper Short Rail as per drg

e) Spot Welding the joints including painting the welded parts to match with existing as per drg

f) 18 mm prelaminated particle head board /Foot board as per drg

Charpoy with IP with plywood top (FD/MAP-II/01)

a) 12mm thick bwp grade confirmng to IS make: Greenply/Centuryply/Archid ply shall be used as per drg.

b) Legs as per drg

c) Upper Long Rail as per drg

d) Upper Short Rail as per drg

e) Spot Welding the joints not exceeding 25 mm including painting the welded parts to match with existing as per drg

f) Stiffner as per drg

Charpoy IP folding with ply wood hard top (FD-388 (R) )

a) 12mm thick BWR grade confirmng to IS make: Greenply/Centuryply/Archid ply shall be used as per drg.

b) Leg as per drg

c) Spot Welding the joints not exceeding 25 mm including painting the welded parts to match with existing

Chair Computer / Revolving (FD/E6/MAP/01, TP)

a) Chair Base PVC with five wheels as per drg

b) Arm as per drg and as directed by Eng in charge

c) Caster Wheel as per drg

d) Tapestry of seat/Back as per drg

e) Hydraulic system as per drg.

f) To fix nut and bolt of chair computer as required as per drg

g) PVC Beading seat /back as per drg

h) Complete seat /back including seat/back plywood along with cushion and tepastry

i) Spot Welding the joints not exceeding 25 mm including painting the welded parts to match with existing as per drg

Chair School with Hand Board (FD/E6/MAP/17, FD/E6/MAP/05)

a) Hand board with PVC beading all around as per drg

b) PVC Seat in blue colour as per drg

c) Spot Welding the joints not exceeding 25 mm including painting the welded parts to match with existing as per drg

d) PVC Cap as per drg

Table Dining Ors (FD-165(M) 273)

a) Table Top including 6mm beading as per drg

b) Legs as per drg

c) Top frame long rail as per drg

d) Top frame short rail as per drg

e) Long Stiffeners as per drg

f) Short Stiffeners as per drg

g) Spot Welding the joints not exceeding 25 mm including painting the welded parts to match with existing as per drg

Table Office Clerk Steel (FD-84(M), FD-381)

a) Legs as per drg

b) Lock of drawer as per drg

c) Drawer as per drg

d) Stiffeners as per drg

e) Spot Welding the joints not exceeding 25 mm including painting the welded parts to match with existing

f) Top 6 mm teak wood beading all around as per drg .

Table Office Officer Steel (FD-84(M),FD-1002,FD-1003)

a) Legs, as per drg

b) Lock of drawer as per drg

c) Drawer as specified & as directed by Engr-in-charge

d) Stiffeners as per drg

e) Spot Welding the joints not exceeding 25 mm including painting the welded parts to match with existing as per drg

f) Top with6 mm teak wood beading all around as per drg

Table bed side steel (FD E6 MAP 15® & FD-157)

a) Legs, as per drg

b) Top with beading as per drg

c) Sides as as per drg

d) Knob /Handle as per drg

e) Drawer as per drg

f) Spot Welding the joints not exceeding 25 mm including painting the welded parts to match with existing as per drg .

g) Back ply as per drg

Teapoy Varandah (FD-35, 255, 383)

a) Legs, as per drg

b) Top with beading as per drg

c) Stiffener as per drg

d) Spot Welding the joints not exceeding 25 mm including painting the welded parts to match with existing as per drg

S&F PVC/Rubber shoe for Hard Bed Charpoy IP, Chair School with hand Board, all types of steel Table as per drg (FD/E6/MAP/08 ®, FD/E6-II/01,FD/E6/MAP/17,FD/E6/MAP/05/,165 (M) ,273,,84 (M),381,FD/E6/MAP/15 R, 157,1002,1003,FD-35,255,383)

Chair Writing (FD/E6/MAP/12)

a) Arm as per drg

b)Teapastry seat and back as per drg

c) Spot Welding the joints not exceeding 25 mm including painting the welded parts to match with existing as per drg

d) PVC Beading of seat /back as per drg

e) Complete seat/back including back /seat ply wood alongwith cushion and tepastry as per drg

Mahesh Traders