Repair and Renovation of Way Side Amenity Centre at Jatamundia Square in Cuttack Dist.

Weeding throughout the year

Clearing & leveling the site by mechanical means with Hydraulic excavator etc. Complete in all respect as per the direction of the Engineer-in-Charge.

Removing old lime or cement plaster from walls including raking out joints 12mm deep and removing the debris within 50m lead. etc. complete as per the direction of the Engineer-in-Charge.

Dismantling & Removing Old grading plaster from roof slab complete in all repsect etc. complete as per the direction of the Engineer-in-Charge.

Dismantling & Removing Brick or stone masonry including removing the debris within 50m lead. etc. complete as per the direction of the E.I.C.

Dismantling & Removing RCC Column , Beam , Slab etc.including removing the debris within 50m lead. etc. complete as per the direction of the E.I.C .

Dismating and Removing cement concrete cleaning the surface , removing the debris within 50m lead. etc. complete as per the direction of the E.I.C .

Earthwork in excavation of foundation trenches in all kinds of soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work etc complete as directed by the Engineer-in-charge.

Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick, watering & ramming etc. complete with all leads & lifts including cost of all labour, T&P completed as directed by the Engineer-in-charge.

Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. In depth with all lead and lift including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.

Supplying, Diluting & Spreading of Chemical Emulsions as pre-constructional anti-termite treatment like CHLORPYRIPHOS OR any other Chemical, as approved by the Central Insecticides Board, as directed by the manufacturer and spraying the mixture uniformly by the sprayer for creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. complete at the rate of 7.5 liters (or as directed by the manufacturer) per Each sqm on vertical and 5.0 liters per Each sqm on horizontal surfaces, 50% of the emulsion to be filled in center to center etc. complete as per the holes made in trenches at 150m.m IS:6313/1981(Part-II) complete including cost, conveyance, loading, unloading of all materials, cost of all labour, T&P, sundries and scaffolding where required for the work etc. as directed by the Engineer -in -charge.

Providing and laying Plain cement concrete of Proportion (1:4:8) in foundation and floors using 40 mm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge.

Providing and laying Plain cement concrete of proportion (1:2:4) in foundation and floors using 12 mm. Size black hard crusher broken granite stone Chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties all materials and cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per the instruction of the Engineer-in-Charge.

Providing, lifting, hoisting and laying Reinforced Cement concrete of M-20 grade, as per approved designs and drawings, having a minimum compressive strength (in work test) 200 Kg. / Square cm in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, then after dismantling of centering and shuttering and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

(a) Column Footing

(b ) Plinth beam

(c) Column & beam

(d ) Lintel

(e ) Chajja

(f ) Roof slab

(g ) Stair case

(h)Slope Roof

(i)RCC Wall

Supplying of all materials, labour, T&P and Providing TOR steel reinforcement of SAIL / RINL / TATA / JINDAL STEEL / SHYAM STEEL for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge including cost, conveyance, loading, unloading of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge.

Brick masonry in Foundation & Plinth using Fly Ash. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.

Brick masonry in Superstructure using Fly Ash. bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.

Providing Tata or any equivalent square or circular structural steel work welded in built up sections, tubular trusses and framed work including cutting,hoisting, fixing in position including cost, conveyance, loading /unloading, of all materials , all labour cost , sundries, T & P etc. complete as per the direction of the E.I.C .

Supplying, fitting and fixing of Profile Sheet - color coated trapezoidal sheet TRIMDEK 1015 from TATA BLUESCOPE STEEL or any approved equivalent make , having the base metal sheet of 0.45mm thick, high Tensile steel with minimum 550MPa yield strength, metallic hot dip coated with aluminum zinc alloy of 55% aluminum 45% Zinc as per AS 1397 – Zincalume® AZ 150 (minimum 150grams as per square meters, total on both sides) with COLORBOND® - Polyester Based quality Paint conforming to AS/NZS 2728 class 3,the paint shall have a total coating thickness of nominal 35 micron (Nominal 20micron exterior coat on top surface and nominal primer coat) on both surfaces with approved color shade etc. complete, Accessories – Fasteners: The steel sheet shall be fastened with min.40Pm zinc coated or min 20Pm Zinc-Tin alloy coated, Hex head, self-drilling screw as per AS 3566 class 3 fasteners of approved make (Buildex of equivalent) with EPDM washer on each crest of sheet for connecting with purlin (or as per design) perpendicular to the sheeting and in the center of the corrugation of rib including cost of all materials, labour sundries, T & P and transportation complete in all respect as per design and drawing as directed by the Engineer-in- charge.

Providing 12mm thick cement plaster in all floors at all heights with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete as per the direction of the Engineer-in-Charge.

Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete as per the direction of the Engineer-in-Charge.

Providing 6mm thick cement plaster in all floors at all height with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete as per the direction of the Engineer-in-Charge.

Providing 20mm thick decorative cement plaster in all floors at all height with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete as per the direction of the Engineer-in-Charge.

Providing and painting two coats with Plastic Emulsion Paint of approved quality and of approved shade (NEROLAC /ASIAN /BERGER /DULOX or equivalent Make) over a coat of Primer (Water bond cement primer) of approved quality in all floors at all heights, including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and the direction of Er-in-charge.

Providing and painting two coats with Weather Coat of approved quality and of approved shade (NEROLAC /ASIAN /BERGER /DULOX or equivalent Make) over a coat of Primer (Water bond cement primer) of approved quality in all floors at all heights, including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and the direction of Er-in-charge.

Finishing Wall surface with Cement based Wall Putty (Water based) of approved make for a finished smooth and even surface to receive painting including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T & P, scaffolding etc. required for the work and complete in all respect as per specification and direction of Engineer-in-charge.

Providing Vitrified Tile flooring using Full body vitrified tiles (Kajaria, / RAK / Somany/ Orient Bell/ Nitco or any equival

ent make) of premium grade, having thickness of 8mm to 10mm, conforming to IS 13756 of 600mmx600mm size, of approved quality & colour in all floors at all heights, on 25mm thick bed of cement mortar of mix (1:1), laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved make to match the shades of the vitrified tile if required, watering and curing for 28 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per Specification and direction of Er-in-charge.

Providing 20mm thick Granite tile flooring of approved quality, colour and size in floors, treads of steps and landings in all floors at all heights on 25mm thick bed of cement mortar of mix (1:1), laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat cement slurry with required pigments of approved make to match the shades of the granite tile if required, watering and curing for 28 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work , finished in all respect as per specification and direction of Engineer-in-charge

Providing Ceramic Tile flooring using Digital Printed Ceramic floor tiles (Kajaria, / RAK / Somany/ Orient Bell/ Nitco or any equivalent make) of premium grade, having thickness of 7mm to 8mm, conforming to IS 13755 of 300mmx300mm size, of approved quality & colour in all floors at all heights, on 25mm thick bed of cement mortar of mix (1:1), laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved make to match the shades of the vitrified tile if required, watering and curing for 28 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per Specification and direction of Er-in-charge.

Providing Vitrified Tile in dadoo/wall/skirting using Full body vitrified tiles (Kajaria, / RAK / Somany/ Orient Bell/ Nitco or any equivalent make) of premium grade, having thickness of 8mm to 10mm, conforming to IS 13756 of 600mmx600mm size, of approved quality & colour in all floors at all heights, on 12mm thick cement mortar of mix (1:3), with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved make to match the shades of the tile if required, watering and curing for 28 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per Specification and direction of Er-in-charge.

Providing 20mm thick Granite in dadoos of approved quality, colour and size in all floors at all heights on 12mm thick cement mortar of mix (1:3) with screened and washed sharp sand for mortar and grouted with neat white cement slurry with required quantities of pigments of approved make to match the shades of the granite tile if required, watering and curing for 28 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P etc. complete as per the direction of the EIC

Providing Ceramic Tile in dadoo/wall/skirting using Digital printed ceramic wall tiles (Kajaria, / RAK / Somany/ Orient Bell/ Nitco or any equivalent make) of premium grade, having thickness of 6mm to 7mm, conforming to IS 13753 of 300mmx450mm size, of approved quality & colour in all floors at all heights, on 12mm thick cement mortar of mix (1:3), with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved make to match the shades of the tile if required, watering and curing for 28 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per Specification and direction of Er-in-charge.

Providing edge moulding to 16mm to 18 mm thick granite stone/Kota stone in counters, Vanities, steps etc., including machine polishing to edge to give high gloss finish including making three nos of groove over tread if required etc. complete including cost, conveyance, loading and unloading and royality of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.

Providing Industrial vitrified Tile flooring using Digital Printed Industrial vitrified floor tiles (Kajaria, / RAK / Somany/ Orient Bell/ Nitco or any equivalent make) of premium grade, having thickness of 8mm to 10mm and of 300mmx300mm size, of approved quality & colour in all floors at all heights, on 25mm thick bed of cement mortar of mix (1:1), laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved make to match the shades of the vitrified tile if required, watering and curing for 28 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per Specification and direction of Er-in-charge.

Providing and fixing of 35mm thick WPC Door Shutter(Solid) with Sun-mica at both sides and teak edge leaping to the periphery of the shutter as per detailed drawing and specification including all hardwares & fixtures like SS tower bolt(150mm to 200 mm),Door stopper,SS aldrop(250mm),SS handle(200mm length),SS handle (150mm length) & SS Butt hinges -125mm x 65mm x2.12mm , including cost, conveyance, loading, unloading of all materials , all labour cost , sundries , T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge

Providing & Fitting fixing of factory made WPC frame or choukath of size 50mmx125mm for doors/windows, comprising of Virgin PVC polymer of K value 58-60 , calcium carbonate and nature fibers (wood powders/rice husk,wheat husk etc.) and non toxic additives fabricated with miter joints after playing PVC solvent cement & screwed with full body threaded star headed SS screws & fixed in position with MS hold fast lugs / SS dash fasteners of required dia and length including cost, conveyance, loading, unloading of all materials , all labour cost , sundries , T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge . Note:- Minimum tolerance +/- 5mm is acceptable , No extra payment on plus side shall be made .

Providing and fixing factory made UPVC frame with Shutter for Windows made of UPVC extruded section having an overall dimension, as below (tolerance ± 1mm) with all thickness 2mm ± 0.2mm .Corners of the door frame to be jointed with galvanized brackets and stainless steel screws, jointed and mired and plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S tube of size 19mmx19mm and 1mm ± 0.1mm wall thickness and 3 no stainless steel hinges fixed to the frame , using 6mm toughened glass including cost, conveyance, loading /unloading, royalties of all materials , all labour cost , sundries, T & P etc. complete as per the manufacture specification & direction of the E.I.C . (MAKE : FENESTA , LG , SPARTA , PREMIUM OR EQUIVALENT )

Providing and fixing factory made UPVC Louvers windows made of UPVC extruded section having an overall dimension, as below (tolerance ± 1mm) with all thickness 2mm ± 0.2mm as per manufacture specification .(Extruded section profile size 42x50mm) :(MAKE : FENESTA , LG , SPARTA , PREMIUM OR EQUIVALENT ) including cost ,conveyance ,royalities of all materials , all labour cost , sundries T&P etc. complete as per the direction of the E.I.C

Supplying, fitting and fixing of M.S grills, Grill gates with top and bottom rails, steel windows

, steel doors, steel frames for doors and windows, staircase ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including cost, conveyance, loading /unloading, royalties of all materials , all labour cost , sundries, T & P etc. complete as per the direction of the E.I.C .

Painting two coats with Synthetic enamel paint over Iron Works/Wood works as per approved shade of approved quality over one coat of primer, sand papering, Polishing the surface including cost, conveyance of all materials, labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge. (The paints and primer are to be approved before procurement and use)

Supplying, fitting and fixing of Stainless steel hand railing using SS steel tube of 304 grade - Balustade @ 0.90m C/C & top railing 1 no - 50mm dia of 2mm thick circular pipe , middle bracing - 32mm x 32mm x 2mm - 2 to 3 rows as per requirement as per approved design and specification, buffing, polishing etc. complete with cost, conveyance of all materials, all labour cost , sundries T & P etc. required for the complete in all respect as directed by the Engineer-in-charge.

Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 6mm size black hard crusher broken granite chips including watering, curing, including cost, conveyance, royalties of all materials, cost of all labour, Sundries T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge.

Providing 40mm thick grading concrete in C.C. (1:2:4) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of 12mm size black hard crusher broken granite chips including watering, curing, including cost, conveyance, royalties of all materials, cost of all labour, Sundries T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge.

Construction of Granular sub-base with Close graded material, spreading in uniform layers with motor grader on prepared surface after mixing by mix in place method with rotovator and compacting with vibratory roller at OMC, to achieve the desired density, including cost, conveyance,loading,unloading, royalties of all materials, cost of all labour, Sundries T&P etc. complete in all respect as required for the finished item of work , as per engineering specification and direction of the Engineer in charge.

Supplying and laying of heavy duty factory made hydraulically pressed and Mechanically compacted interlocking Pavers of 80mm thick (Compressive strength minimum of 40 N/mm²), over 50mm sand, levelled and compacted ,laying of interlocking paver block with sand binding and final compaction with Plate vibrator, finishing the surface including cutting of blocks at the edges as per requirement including cost, conveyance,loading,unloading, royalties of all materials, cost of all labour, Sundries T&P etc. complete in all respect as required for the finished item of work , as per engineering specification and direction of the Engineer in charge.

Supplying & fitting fixing of grated door or gate using Tata or equivalent MS rectangular / square pipes as per approved plan & design including cost & conveyance of all materials like , all labour cost , sundries T&P etc. complete in all respect as per the direction of the E.I.C.

Providing & fixing in position false ceiling using 8mm thick Calcium silicate board as per approved pattern / design including cost of frame work as per requirement / design / drawing including cost , convenience of all materials , all labour cost , sundries T&P etc. complete in all respect as per the direction of the EIC.

Providing & fixing in position false ceiling using Armstrong board as per approved pattern / design including cost of frame work as per requirement / design / drawing including cost , convenience of all materials , all labour cost , sundries T&P etc. complete in all respect as per the direction of the EIC.

Providing and fitting fixing of MS Rolling shutter including cost , convenience of all materials , all labour cost , sundries T&P etc. complete in all respect as per the direction of the EIC.

Providing & Applying two coats of 1mm thick elastomeric cementious waterproofing coating Brushbond RFX or any equivalent as approved by EIC including cost , convenience of all materials , all labour cost , sundries T&P etc. complete in all respect as per the direction of the EIC.

Repairing of damaged / defective R.C.C / P.C.C work or any Water leaked damaged Masonry work(Pointing work of joints) using High Strength Crystalline technology based Waterproofing cementous repair mortar having: a) Initial setting time of 4.11 hours - ASTM C 266 b)Rapid Chloride Permeability of 420 Coulombs in 90 Days - ASTM C 1202 c) Compressive strength 59.3 Mpa in 28 days - ASTM C 109 ,c)Superior bond strength of 2.3 Mpa as per ACI-503R,d)Chemical durability (mass loss negligible i.e. 0.22% in 84 days - ASTM C 267) with smoothening and resurfacing of the area by using all required tolls and safety equipments along with necessary arrangements of scaffolding to reach the required height with high strength crystalline based cementous repair mortar etc. complete in all respect as per the direction of the E.I.C.

Supplying & fixing of Roller Blinds Marvel make or any equivalent make out of 100% polyster fabric with acrylic coating, resistant to cracking, fraying & tearing. Conditionally cleanable with damp cloth. Inner roller made out of 35/33mm aluminium heavy duty pipes and heavy duty accessories make :Metallica 1911 HS (Part-I) including cost of all material & labour, conveyance complete in all respect as per the direction of Engineer in charge.

PH WORK

Providing, installation and testing of Floor mounted WC inclusive of Cistern & seat cover with Installation Kit, Drain Pipe Connection pipe etc. complete in all respect with all accessories set for WC with all sanitary fittings like trap, outlet-inlet necessary connections, colour including cost of all materials, all labour, conveyance, loading & unloading and T&P complete as per direction of E.I.C. (EWC Hindware Cat No-20083(S-10) ,Cistern- Hindware Cat No- 21051 or Equivalent make)

Providing, installation and testing of Physically Challanged Toilet Set Hindware Matrix Set 70002 or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge.

Providing and fixing White Vitreous China Flat back large Urinal with FLUSH valve for Urinal Complete set etc cutting and making good the walls and floors wherever required including cost of all materials, all labour, conveyance, loading & unloading and T&P complete as per direction of E.I.C. Urinal - Hindware 60002 , Flush valve 32mm dual flush with square plate Hindware F860038) or Equivalent make

Providing & Fixing of squatting pan Urinal with ISI marked of approved make & size confirming to be fixed formly in position with C.C(1:3:6) including cost of all materials, all labour, conveyance, loading & unloading and T&P complete as per direction of E.I.C. (Squatting pan Hindware-cat no 60003) or Equivalent make

Providing and fixing of Ceramic White Pedestral Wash Basin including waste coupling and brackets, cutting and making good the walls wherever required with provision for pillar cock but excluding the cost of pillar cock, including cost of all materials, all labour, conveyance, loading & unloading and T&P complete as per direction of E.I.C. (Basin-Hindware Cat No 91049 , Pedestral-Hindware Cat No :- 11032) or Equivalent make

Providing and fixing of Ceramic White

Table Top Wash Basin including waste coupling and brackets, cutting and making good the walls wherever required with provision for pillar cock but excluding the cost of pillar cock, including cost of all materials, all labour, conveyance, loading & unloading and T&P complete as per direction of E.I.C. (Table top Basin-Hindware Cat No 10104 ) or Equivalent make

Providing and fixing of Ceramic White Pedestral Wash Basin including waste coupling and brackets, cutting and making good the walls wherever required with provision for pillar cock but excluding the cost of pillar cock, including cost of all materials, all labour, conveyance, loading & unloading and T&P complete as per direction of E.I.C. (Basin-Hindware Cat No 10088 , Pedestral-Hindware Cat No :- 11003) or Equivalent make

Providing & Fixing of 600x450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with Chromium Plated brass screws and washers complete including cost of all materials, all labour, conveyance, loading & unloading and T&P complete as per direction of E.I.C.

Providing & Fixing of Towel rail Hindware F102012 or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge.

Providing & Fixing of Towel ring Hindware F580003 or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge.

Providing & Fixing of Glass Shelf Hindware F880010 or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge.

Providing & Fixing of Soap Case Hindware F580004 or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge.

Providing & Fixing of Paper Holder Hindware F102009 or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge

Providing & Fixing of Division plate Hindware 61005 or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge.

Providing & Fixing of circular type stainless steel jalli (grating) including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge.

Providing & Fixing of Bib cock Hindware 360004 or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in chargeor Equivalent make.

Providing & Fixing of Two way Bib cock Hindware F360005 or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge.

Providing & Fixing of Pillar cock Hindware F360002 or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge.

Providing & Fixing of Pillar cock Hindware 360001 or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge.

Providing & Fixing of Angular stop cock Hindware F360006 or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge.

Providing & Fixing of Consealed stop cock Hindware F36007 (Exposed part),Hindware F850094 ( Inner part) or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge.

Providing & Fixing of Shower Hindware F160148 or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge.

Providing & Fixing of Health Faucet Hindware 160192 or Equivalent make including cost of all materials , all labour cost , sundries T&P complete in all respect as per specification and direction of the Engineer in charge.

Providing & Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of Supreme/ Astral/ Ashirvad/Oriplast or equivalent make confirming to IS 15778 having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per relevant BIS code including cost of all materials, all labour, conveyance, loading & unloading and T&P complete as per direction of E.I.C.

15mm dia

20mm dia

25mm dia

32mm dia

40mm dia

50mm dia

Laying in trenches 75 mm diameter U-PVC SWR pipes Single Socketed 3.00 mtr length conforming to IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification including cost of all materials, all labour, conveyance, loading & unloading and T&P complete as per direction of E.I.C.

Laying in trenches 110 mm diameter U-PVC SWR pipes Single Socketed 3.00 mtr length conforming to IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification including cost of all materials, all labour, conveyance, loading & unloading and T&P complete as per direction of E.I.C.

Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification including cost of all materials, all labour, conveyance, loading & unloading and T&P complete as per direction of E.I.C.

110mm dia single junction with Door

110mm dia plain bend

110mm clamps for pipes

110mm vent cowl

Providing & Fixing cpvc ball Valve confirming to IS : 781-1995 of Supreme/ Astral/ Ashirvad or equivalent make as per specification including cost of all materials, all labour, conveyance, loading & unloading and T&P complete as per direction of E.I.C.

40mm dia ball valve

32mm dia ball valve

25mm dia ball valve

Supplying all materials, labour, T&P and fixing PVC water storage tanks of 2000 ltr capacity (shade white) confirming to IS:12701-1996 including cutting holes through the tank and fixing pvc pipe and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including cost of all materials, all labour, conveyance, loading & unloading and T&P complete as per direction of E.I.C.(Sintex/Equivalent)

Supplying all materials,labours,T&P and constructing 1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit including cost of all materials, all labour, conveyance, loading & unloading and T&P complete as per direction of E.I.C.

Cutting holes through existing brick masonry wall including making good the same in cement mortar (1:4) for taking GI /PVC pipesetc complete as per specification complete as per direction of Er-in-charge.

Cutting grooves in pucca floors and walls for taking GI/PVC pipes & making good the damages as per specific

ation complete as per direction of Er-in-charge.

BORE WELL

Labour for drilling a perfectly vertical bore hole 200mm dia of specified dia for a specified depth below ground level through consolidated & unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/300 psi) as required to suit the site condition as per the direction of Er-in-charge including use of own rigs with its accessories ,tools & plant & consumables etc for lowering of 200 mm dia PVC/GI pipes for housing fitted with socket & with or without well screen as per the necessity for soft , medium, hard & boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well).etc. complete as per the direction of the E.I.C.

Lowering the following size of G.I. /PVC/MS housing pipe with or without slotted pipes as per the necessity from ground level up to 45mtr depth fitted and fixed up in perfectly vertical position including cutting & threading of pipes & slotted pipes & supplying & fixing all jointing materials, tools & plant etc. all complete & keeping the top of casing pipe threaded including plugging tube-wells to prevent entry of foreign materials.150mm dia

Cleaning & developing the tube well using their own compressor continuosly worked till clear & adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Er-in-Charge.

Supplying all materials, labour, tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole including cost of cement etc. all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing. etc. complete as per the direction of the EIC.

Supplying all materials, labour, T&P for fitting and fixing of 1.50HP submersible pump of TEXMO Make(Model no: TRF 1010+TF007) or Equivalent including cost of all materials, transportation and taxes of pump etc. complete as per the direction of Engineer-in-charge.

Supplying all materials, labour, T&P for fitting and fixing of 1.50HP control panel including with DOL starter with indicator 32 Amp TPN main switch including connection, installation etc. all complete as per direction by the Engineer-in-charge.

Supplying and laying of 4.00sqmm 3-core flat cable including all cost of material, labour, T&P etc. all complete as per direction by the Engineer-in-charge.

Supplying all materials, labour, T&P for fitting and fixing of 40 mm dia HDPE Pipe of ORIPLAST/SUPREME or equivalent make etc. all complete as per specification & direction of Engineer-in-charge.

Supplying, fitting, fixing of S.S tapper 2nos of 0.45mtr long M.S supporting clamps, plastic rope. etc. all complete as per specification & direction of Engineer-in-charge.

Land Scaping

EXCAVATION OF PITS : Earth work in Ordinary soil for small trees with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth of size 0.2x0.2x0.2 m. @ 138.71/cum and the Earth transported by transport vehicles etc. complete as per the direction of the EIC.

Land Scaping

Earth work in Ordinary soil for big trees with initial lead and lift including rough dressing in layers not exceeding 1m in depth of size 0.60mx0.60mx0.75 m. @ 138.71/cum and the Earth transported by transport vehicles etc. complete as per the direction of the EIC.

Filling pits with fertile soil/ silt including carriage up to each pit by tractor/ truck up to site and by head load up to pit. Pit size 0.2x0.2x0.2 m etc. complete as per the direction of the EIC.

Pit size 0.60mx0.60mx0.75 m

Application of organic manure : (FYM/cimpost/sludge) Including carriage upto pit By tractor/truck upto site and by head lord upto pit.Pit size 0.2x0.2x0.2 m etc. complete as per the direction of the EIC.

Application of chemical fertilisers npk and insecticited/termicide including cost of materials/carriage and cost of application: Pit size 0.20mtx 0.20mtx0.20mt @ 50gm of NPK and 10gm of termicides etc. complete as per the direction of the EIC.

Pit size 1.00mtx 0.60X0.60X0.75 cum @ 50gm of NPK and 10gm of termicides etc. complete as per the direction of the EIC.

Cost of planting including mixing of manure, fertilizer, pesticides and initial watering. For shrub category etc. complete as per the direction of the EIC.

Cost of planting including mixing of manure, fertilizer, pesticides and initial watering. For tree category etc. complete as per the direction of the EIC.

Supporting plants with stakes including cost of stakes etc. complete as per the direction of the EIC. : For shrub category

Supporting plants with stakes including cost of stakes etc. complete as per the direction of the EIC. : For tree category

Replanting of Trees of by Uprooting and Digging Pits etc. complete as per the direction of the EIC. : For shrub category

Replanting of Trees of by Uprooting and Digging Pits etc. complete as per the direction of the EIC.: For tree category

Supply, Filling, Spreading of Good earth, Garden Soil including cost of material, carriage, labour and cost of application. Lawn area etc. complete as per the direction of the EIC.

Contingent expenditure including cost of ropes, implement,baskets, drums etc. complete as per the direction of the EIC.

Cost of planting trees including transportation upto site etc. Complete as per the direction of the EIC .

Trees

Hibiscus tiliaceus variegated (size-5'-6'' ft)

Plumeria alba (size-5'-6'' ft)

Plumeria Thai varieties (size-5'-6'' ft)

Foxtail Palm (size-3'-4'' ft)

Arenga palm (size-3'-4'' ft)

Bottle palm (size-3'-4'' ft)

Cost of planting shrubs including transportation upto site etc. Complete as per the direction of the EIC .

Ixora Thai pink (size-1'-2'' ft)

Ixora Thai red (size-1'-2'' ft)

Ixora Thai yellow (size-1'-2'' ft)

Ixora Thai White (size-1'-2'' ft)

Mini tagar (size-1'-2'' ft)

Mini tagar variegated (size-1'-2'' ft)

Development of lawn :Suppling and laying of cow dung manure, well decomposed, garbage free including including cost, conveyance , loading, unloading etc. complete as per the direction of the EIC .

Development of lawn : Clearance of site, excavation of around upto a depth of 30cm, removal of excavated materials to outside for dumping at suitable places etc. Complete as per the direction of the EIC

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. Mexican grass

Maintenance of Plants

Planting year

Weeding, soil working up to 50cm radius around the plant, in August, September and application of chemical fertilizers complete as directed by the engineer-in-charge.

Weeding, soil working up to 50cm radius around the plant and mulching in October &November complete as directed by the engineer-in-charge.

Watering

Watering once a week with about 20 litres of water from 1st November till 31st March (22 times) as directed by the Engineer-in-charge.

Watering once in 3 days from 1st April till 15 June (26 times) as directed by the Engineer-in-charge.

2nd Year Maintenance

Soil working and weeding upto 0.50 mt radius around the plant in july-Aug as directed by the engineer-in-charge.

Application of chemical fertilizer NPK @ 100gm per plant including cost etc. as directed by the engineer-in-charge.

Soil working and mulching during Oct-Nov. as directed by the engineer-in-charge.

Watering from 1st Feb till 15 June once a week with about 20 litres of water 20 times as directed by the Engineer-in-charge.

Contingent, expenditure including baskets, drums, implements as directed by the Engineer-in-charge.

3rd Year Maintenance

Tree doctoring to give a aesthetic shape by pruning unwieldy branches as directed by the Engineer-in-charge.

Weeding and mounding

Maintenance of Grass Lawn

Maintenance during planting year

Watering for about 8 months leaving rainy days as directed by the Engineer-in-charge.

First mowing after three months and there after every two months as directed by the Engineer-in-charge.

Weeding throughout the year.

Top dressing with soil, FYM, chemical fertilizer twice a year after mowing, in June and November including antifungal treatment as directed by the Engineer-in-charge.

Contingent expenditure

LAWN MAINTENANCE DURING SECOND YEAR

Watering for about 8 months leaving rainy days as directed by the Engineer-in-charge.

Watering for about 8 months leaving rainy days

Weeding throughout the year.

Top dressing with soil, FYM, chemical fertilizer twice a year after mowing, in June and November including antifungal treatment as directed by the Engineer-in-charge.

Contingent expenditure

LAWN MAINTENANCE DURING SECOND YEAR

Watering for about 8 months leaving rainy days as directed by the Engineer-in-charge.

Each No

Each Sqm

ELECTRICAL WORKS

Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6 Amp, 250 V clip in type switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex /Polycab/ Anchor / Havells/KEI/Eq) (Make of modular box,cover,switch & socket-Legrand Arteor/schneider Zencelo/Panasonic Vision/Eq)

GROUP-A

GROUP-B

GROUP-C

Recessed wiring to secondary light point looped from primary light point with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including 3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer-in-charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Average Length: 3 mtr

Recessed wiring to ceiling fan point with 1.5 sqmm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit with 6Amp 250V Modular Switch,Stepped type Moudular Regulator, Base & Cover with 1.5sqmm FRLSH PVC insulated single core multistrand copper conductor for running earth including all accessories & connection as per direction of Engineer in charge. (Make of wire KEI /Polycab/ Anchor / Havels/Eq) Group c

Supply and fixing of 5 / 6 amp socket outlet with 6 Amp, 250 V clip in type modular switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection on same switch board as per direction of Engineer-in-charge.

Recessed wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVC conduit with 6Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size , with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection on separate board as per direction of Engineer-in-charge.(Make of wire KEI /Polycab/ Anchor / Havels/ Finolex /Eq)

Supply and fixing of 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Supply and fixing of 1x 6 + 1x16 amp socket outlet controlled by 1x 6 + 1x16 amp 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer-in-charge.

Supply and fixing of 6 pin 16 amp socket outlet with 16 Amp, 250 V clip in type switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Supply and fixing of 6 pin 16 amp socket outlet ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Supply and fixing of 32 amp Modular DP switch ISI marked mounted on G.I moular box with face plate & cover of suitable size including all accesories and connection as per direction of Engineer-in-charge.

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5)

Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make-Finolex/ Anchor/Polycab /HAVELLS /RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)

Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required wih necessary MCB , RCCB / ISOLATORS as required.Note for MCB- There should be colour indication for tripping On ,Off & Trip/There should be mid trip position for toggles for electrical fault conditions.(With 2 Years Warenty)

Suppl

y, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 12 way SPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-40 Amp DP MCB (10KA) Outgoings-10/16/20A SP MCB 10KA-10 Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq)

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 4 way TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below.Incommer 1 No-63Amp / 40Amp FP MCB (10KA) Outgoings-10/16/20A SP MCB 10KA-12Nos of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make-L&T/ Hager/ Schneider/ Legrand/ Eq)

Supply and fixing of 5 amp to 32 amp rating 240 V "B"/C series 10KA single pole miniature circuit breaker suitable for lighting and other loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.

Supply and fixing of 40 amp DP miniature circuit breaker "C" curve suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.

Supply and fixing of 63 amp TPN miniature circuit breaker "C" curve suitable for inductive loads in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.

FITTING & FIXTURE

Supply, Installation, Testing and Commissioning of Plastic body Exhaust fan 200 mm sweep with louvers of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/Crompton/Usha/Orient/Bajaj).

Supply, Installation, Testing and Commissioning of Metal body Exhaust fan 300 mm sweep of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/Crompton/Usha/Orient/Bajaj).

Supply, Installation, Testing and Commissioning of 1200 mm sweep ceiling fan including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/Crompton /Usha/Orient /Bajaj).

Supply, Installation, Testing and Commissioning of 400 mm sweep Wall fan etc of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make- Havells/Crompton /Usha/Orient /Bajaj).

SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 10 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of 12 watt LED Ceiling Recessed mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

SITC of 18 watt LED Ceiling Surface mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj).

Supplying, storing, laying, testing and commissioning of 3.5c x 35 Sq. mm armoured Aluminium Cable direct in ground including excavation, sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supplying and laying 25 mm x 6 mm Copper earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.

Supply, installation, testing & commissioning of 3000 mm long decorative lighting pole with mild steel body step pole with grey/black powder coting fnish, Pole size dia 60.3 & Base size dia139.7. The control gear tray made up off diecast alluminium body & prewired with 2.5 sqmm copper cable, 6 Amp SP MCB, 32 Amp 4 pole connector, 5 Amp 3 way terminal connector & earthing point. The Pole shall have base Plate of size (200x12) mm with provision for founation bolt fittings.Compatible for all suitable size for cable entry & exist as required of approved make with all materials & labour as per the direction of Engineer-in-Charge.(Make: K- Lite Flat Series KP-4786/ Havells / BAJAJ/CG/Jaquar/equivalent).

Supply, installation, testing & commissioning of coil earthing etc as required as per the direction of Engineer-in-Charge.

Supplying, installation and commissioning of 35W LED post top light luminaries having Versatile pressure die-cast aluminium IP66 with high power LED as light source to be fixed on the ends of pole etc complete with connection as required for the work and as per direction of Engineer-in-Charge.(Make: Havells Ruby /K- Lite/ BAJAJ/ CG/Jaquar).

Supply, installation, testing & commissioning of IP 65 LED street Light of 90 W Capacity 6000K Colour temperature with pressure die-cast Aluminium body having in built electronic driver which have 50000 burning hour road way luminaries of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.