ADDITION/ALTERATION IN GAZEBO OF BLDG NO P-28 AT NORTH CAMP AND OTHER SANCTION WORKS UNDER GE (AF) BAMRAULI

Amount

S&F factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F factory made uPVC white colour Casement door with top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

Dismantling of floor,hearth or wall tiling includinguding cement mortar bedding but not backing and rubbish off the premises complete all as specified and directed..

M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in leveling course etc complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 1:4, 20 mm thick for laying floor finishes complete all as specified.

M&L for vitrified ceramic tiles 10mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid in floors set and jointed as per manufacturer's instructions Over & including screed bed or bedding layer 15mm thick in CM (1:6) complete all as specified and directed.

M&L for non skid Heavy duty Endura tile 400x400x10-12mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in colored cement to match over and including 15mm thick screed in CM 1:4 complete all as specified and directed.

M&L for granite (of any type) 20mm thick machine cut, bedded and jointed with white cement with admixture of pigmewnt to match the shade of granite stone incld griding and polishing including 15 mm thick screed bed in CM(1:6) complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for Brickwork with subclass "B" bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for rendering 5mm thick in CM 1:3 finished in ceiling complete all as specified and directed

Preparation of new plastered surface of wall and applying two coats of ACE paint over a coat of Putty complete all as specified and directed.

M&L for two coat of oil bound distemper on newly plastered surface on wall over 3mm thick wall care putty all as specified and directed.

Preparation of new plastered surface of ceiling and applying three coats of white wash.

M&L for complete removing of existing treatment on wall surface and applying two coat of OBD over 3 mm thick birla white care Putty on wall to obtain smooth finish etc complete all as specified and directed.

All as per item No - 18 above but one coat of Oil bound distemper on ceiling surface complete all as specified and directed

M&L for preparation of old decorated surface of wall, roof or sheet any type and applying two coat of ACE exterior emulsion paint (Asian Paint) complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m complete all as specified and directed.

M&L for 75mm thick for PCC 1:3:6 type C-1 as in plinth protection , complete all as specified and directed

M&L for RCC B-1 (1:2:4) nominal mix using 20 mm graded stone aggregate as in beams, cantilever, bressummers, lintels over 1.50 m spanand similar work etc complete all as specified and directed

M&L for RCC B-1 (1:2:4) nominal mix using 20 mm graded stone aggregate in roof slabs supported walls beam and columns in floor roof landing, shelves etc

M&L for formwork to sides and soffites of floors or roof beam, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports,overhangs,etc also splays between floors and beams etc for fair finish.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as above item No 26 but 5mm dia and over upto & incl 10 mm dia as in stirrups

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 12mm thickness gypsum board pannel including aluminium false ceiling snap grid frame work size 605 x 605 mm with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. etc complete all as specified and directed

S&F POP false cornoces matching with existing POP false ceiling and wall putty (1:10) and applying two coats of oil bound distemper incl chalk whitening and priming in alkali restant incl preparing the surface complete all as specified and as directed by Engineer-in-Charge.

S&F premium sand textured finished mineral fibre acoustical ceiling tiles of size 600x600x16mm thick and placed on GI grid powder coated snap grid ceiling 600x600 module consisting of wall angle section 24x24mm and tee section with web height of 38mm and flange 24mm and cross T 24mmx24mm size with suspension system complete all as per TD drg No CWE/BAM/TD-34 dated 29 Sep 2016.

S&F 3mm thick Aluminium composite panel cladding using aluminium composite panel sheet of 3mm thick (Vita 25mm aluminium foil with PVDF coating) over and including steel frame work,MS Tube (ACP will be fixed over MS tube welded over MS steel framed works) and filling the gaps with silicon , sealant and other material of approved quality etc complete in all respect as per specification and direction of Engineer-in- charge.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

S&F manglore roof sheet coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified.

S&F Pre painted galvalume aluminium zinc coating GI base plain steel sheet 0.50mm thick (TCT) of an colour having minimum tensile strength of 550 Mpa as ridge in roof fixed with self tapping screws as specified in particular specifications. Note :- (i) Outer colour of sheet shall be as approved by GE based on availability from manufacturer. (ii) Work shall be executed by the manufacturer's authorised Vendor only.

M&L for PCC 1:3:6, type C 2 using 40 mm graded stone aggregate in foundation and mass concrete/ filling, complete all as specifed and directed.

S&F mild steel tubular section as in post / column / strut etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240.

M&L for two coats of synthetic enamelled paint over a coat of red oxide on steel surfaces over 10 cm width or girth over new/old steel surfaces etc, complete all as specified and directed.

M&L for pebble stone of rounded/oval shape of various sizes of natural color laid in PCC 1:2:4 type B- using 20 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified as directed.

S&F 6 to 8mm thick High pressure laminated sheets of 200mm wide of any color of solid and smooth finish, of Poly methyl meth acrylate material (PMMA) of tensile strength 1100 Kg/Sqcm and compressive strength of 2700 Kg/Sqcm with all fittings and fixtures complete all as specified and directed.

M&L for 18 to 22 mm thick machine cut Kota stone slab flooring, Landing,steps and plateform over and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and grinding and polishing to achive mirror finish complete all as specified and directed.

M&L for Stone kerb of roughly squared stones of size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for concealed point wiring on wall and surface wiring on ceiling/roof with necessary arrangements with 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor with and including PVC concealed conduit of medium grade with all fittings including Modular metal flush box minimum 1.6 mm thick, Modular white cover plate with frame, of required module at site, fixed with chromium plated screws and washers for switches and sockets, including 1.5 Sqmm single core 1100 Volts grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to common earth dolly and including cutting chases in walls / floors for concealed conduit and making good disturbed surfaces area by cement mortar (1:3) and to match with the existing surface/colour by using existing oil bound distemper/white wash complete all as specified and directed for the following:- Note: - Cutting chase to wall wherever required shall be included in the rate quoted for point wiring.

(a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item No 44 but with 2.5 sqmm copper conductor cable for One 5 Amps socket outlet on independent board.

All as per item No 44 but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size.

M&L for Modular switch 1 way 6A, 1 module, flush button single pole, one way, complete all as specified and directed by Engineer in charge.

S&F Modular socket outlet 2 in 1, 5 pin, 6 Amps flush type white finish complete all as specified and as directed.

M&L for Modular socket outlet 2 in 1, 6 pins 6A and 16A, combined 2 module, complete all as specified and directed by Engineer in charge.

M&L for Modular switch 1 way 16A, 1 module, flush button single pole, one way, complete all as specified and directed by Engineer in charge.

S&F ceiling rose surface backlite 65x50mm 3 terminals complete all as specified and directed.

S&F Modular Fan step regulator, 120W - 2 module complete all as specified and directed.

M&L for Modular bell push 5 Amps 230 V, AC circuit complete all as specified and directed.

M&L for call bell ding dong 230 V AC circuit complete all as specified and directed by Engr-in-Charge.

Taking down old and u/s light fittings conventional type from wall surface / ceiling or any position and making good the disturbed surfaces all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror strip type with high out put diffuser,7 watt 220 V AC decorative type with driver holder and LED lamp 5 meter in roll including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

S&F LED wall spot light 9 watt including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED wall spot light 11 watt including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed

S&F in replacement GI Pipe bend to shape 1.5 mtr (32/40mm dia as required at site) with two Nos clamps made out of 50x6mm flat and two Nos bolts with nuts duly grouted in wall or fixing on wall complete all as specified and directed.

Taking down carefully unserviceable DB any type/size disconnecting and making good disturbed surfaces complete all as specified and directed.

S&F factory made epoxy powder coated distribution board TPN 04 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, stranded DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.

S&F factory made epoxy powder coated distribution board SPN 08 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, stranded DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified & directed.

Taking down carefully unserviceable MCB SP/SPN/Isolator of any rating/size.

S&F MCB single pole 240 volt 'C' curve 10 KA 5 to 32 Amps capacity all as specified and directed incl taking down old one.

S&F MCB single pole & neutral 240 volt 'C' curve 10 KA 25 to 32 Amps complete all as specified and directed .

S&F MCB triple pole & neutral 240 volt 'C' curve 10 KA 40 to 100 Amps complete all as specified and directed .

Taking down old and u/s sub main wiring of 2/3 runs of any sizes from any position including, making good disturbed surface of wall ceiling etc complete all as specified and directed

M&L for concealed sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6.0 Sqmm of voltage rating up to and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 25mm with all fittings and accessories, along with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 6.0 Sqmm (green colour) as earth continuity conductor all as specified and directed. (Note : Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit)

S&F exhaust fan steel body, heavy duty, double ball bearing, Copper wounded complete with louvers shutter, 230 volt AC, single phase, 50 Hz, 1400 RPM, 450 mm sweep with blades, steel frame complete all as specified and directed.

S&F wall mounted fan,400 mm sweep, single phase, 230 Volts AC,1200 RPM, ISI marked fixed properly at directed location with provisioning of suitable fixing/tightening arrangements and connecting/testing and including writing MES No complete all as specified and directed,

Cutting the existing wall/removing existing steel bar to make a hole for fixing of ventilation fan through packing of wooden ply to support the ventilating/ air circulating fan including necessary nut and bolts of suitable size incl making good of disturbed surface complete all as specified and directed by Engr-in charge.

S&F ceiling fan 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush less direct current (BLDC) motor, class of insulation : B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service Value ( CMM/W) minimum 6.00, Air delivery minimum 210 CMM 350 RPM ( tolerance as per IS : 374 - 2019), THD less than 10 % ,electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise = 75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230 V , 50 Hz, single phase AC supply, earthing etc including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable and including writing MES No complete all as specified and directed.

Material, labour jointing & testing XLPE insulated armoured heavy duty electric cable with standard aluminium conductor, 1100 volts grade, cross-sectional area 50 Sqmm 3.5 core including making connection with suitable size of cable gland, aluminium lugs etc complete including taking down old U/S cable complete all as specified and directed.

Excavation in trenches in soft/loose soil n. exc 1.5 Mtr wide and not exc. 1.5 M deep and getting out including forming bottom surface for laying of pipes complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 mm thick complete all as specified and directed.

Removal of excavated material to a distance not exc 50 Meter and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed.

Supply and laying sand dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness all complete as specified and directed (Note - Only punned thickness will be measured for payment purpose)

Supply and laying bricks (old size) for cable protection by using common burnt clay building bricks, sub-class 'B' of size 230x11.5x7.5 cm having crushing strength not less than 75 Kg/sqcm, laid dry flat across length of the cable with width of the trenches equal to length of bricks, all as specified and directed

Supply & Fixing in replacement GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 40mm dia complete all as specified and directed

Earthing complete with galvanized steel earth plate electrode 60 cm x 60cmx 6.3mm thick buried direcly in ground vertically to a depth not less than 2.25 meters below normal ground lev el with the top edge of earth plate not less than 1.5 meters below ground level connected to galvanized iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel all as shown in electrical plate No.5 of SSR part I and earth wire protected by galvanized pipe light grade 40mm bore and thorugh test point including necessary earth work and excavation in any type of strata, GI light grade 20mm bore watering pipe with funnel and wire mesh, PCC 1:2:4 type B1 chember with 40mm thick RCC 1:2:4 type B1 design mix cover slab with 6mm kdia MS bars at 100mm c/c both ways with MS Hook 6mm dia MS bars etc complete all as specified and directed and testing on completion.

Supply, installation, commissioning and testing LT panel board, conforming to CPRI Specifications, 415V, 50 Hz, AC supply , three phase and neutral, outdoor (Kiosk) type with apron, of suitable size, factory made, fabricated with 3.15mm thick mild steel sheet (Outer Body), ISMC-75 base channels, duly powder caoted internally and externally painted with seven tank process with approved shade, rubber gasketted, hinged fornt and back openable doors with proper locking arragnement for dust and vermin proof, internal wiring with suitable size of PVC FRLSH copper conductor cable complete including suitable size lugs, glands etc. incl one no. brass pad lock, 50mm size, 4 levers and making connections, incl earth work and PCC foundation complete comprising of the followings and specified: - (i) Aluminium bus bar 1.4 type of incomming Amps current rating capacity comprising of 4 Aluminium strips of appropriate size provided with heat shrinkable sleeve not less than one mm thick and epoxy insulators 1100 volts rating 8 nos. (ii) Cable alley for I/C 400 Amps and all outgoing feeders Incoming: - (a) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 16 KA -01 Nos (b) Meter module digital volt and amp meter incl CTs of appropriate size with accessories -01 Nos Outgoing: - (a) MCB 100 Amp 230V with breaking capacity of 16 KA - 01 Nos (a) MCB 63 Amp 230V with breaking capacity of 16 KA - 01 Nos

Supply, install and commissioning tower air conditioner 4 TR with verticool,rated cooling capacity 44001btu/Hr,ISEER 2.71,Scroll compressor and refrigerant gas with cordless remote control unit and in built air ioniser, plasma filter for better indoor air quality, of capacity 230V/50Hz, single phase type including breaking necessary hole in wall for fixing outdoor unit and making good to disturbed surfaces with cement mortar to match with existing finishes after commissioning, making necessary connections unplasticised PVC pipes medium duty 25 mm dia for draining out condensed water all as required including necessary connection complete all as specified and directed.

S&F type sheet metal single pole and neutral enclosure with two pin and earth plug and socket capacity 20-32 Amps modular type complete with one No SP MCB capacity 20-32 Amps complete all as specified and directed by Engineer-in-Charge

M&L for sub main wiring with 2 single core 6 Sqmm PVC unsheathed and PVC insulated stranded copper conductoor cable in and including rigid 25 mm dia PVC conduit and 6 sqmm PVC insulated unsheathed contineous earth wire and connected to earth dolly and making good disturbed surfaces with cement mortar and paint to match existing surface comlete all as specified and directed.

M&L for non skid Heavy duty Outdoor tile 400x400x10-12mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in colored cement to match over and including 15mm thick screed in CM 1:4 complete all as specified and directed.

M&L for cement concrete 75 mm thick C-2 (1:3:6) (40mm graded crushed stone aggregate) as in plinth protection/ external floor surfaces, complete all as specified and directed

M&L for complete removing of existing treatment on wall surface and applying two coat of OBD over 1 mm thick birla white care Putty on wall to obtain smooth finish etc complete all as specified and directed.

All as per item No 89 above but one coat of Oil bound distemper on ceiling surface complete all as specified

Preparation of old painted surfaces of wood and wood based materials of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enammel paint.

M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamal paint complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed

M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in bed plate for fixing holdfast etc all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

M/S Parmod Johar (BID ID -3146096)

verma enterprises (BID ID -3145265)

A S ENTERPRISES (BID ID -3145128)

M/S V K MEHROTRA (BID ID -3145622)