Ajmer Division:- Provision of S&T Associated work in C/W Chittaurgarh-Udaipur- TTR(FS+TWS+ WCMSC)-45 set in Ajmer Division NWR

Conductor Description:- Termination of Outdoor Cables (Main Cables /tail cables) at both ends in location

dressing of cables and wires with dressing threads as per standard practice. All material required for this item will be supplied by contractor. The outdoor cable shall be terminated in Relay Room, DG Room, ASM Room etc under supervision and instructions issued by Engg. incharge of the work. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after execution

Description:- Supply of uncharged Low Maintenance Lead Acid (LMLA) secondary cell, shelf

and bolts etc. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply. 2V, 80 AH

Description:- Supply of uncharged Low Maintenance Lead Acid (LMLA) secondary cell, shelf

and bolts etc. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply. 2V, 500AH

Description:- Charging of Lead Acid Batteries with contractors own battery grade sulphuric acid and distilled water with minimum two charge - discharge cycles, installation of charged batteries in

instruction of Engineer-in-charge. Detailed measurements of initial charging shall be recorded jointly by contractor & Rly's site-in-charge. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Execution. 2V 80AH

AJMER DIVISION-S AND T/NORTH WESTERN RLY

and distilled water with minimum two charge - discharge cycles, installation of charged batteries in groups & their connection & wiring. The work shall be done as per extant practice of N.W.Rly & instruction of Engineer-in-charge. Detailed measurements of initial charging shall be recorded jointly by contractor & Rly's site-in-charge. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Execution. 2V 300AH/ 500 AH

Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply.

Description:- Supply of ELECTRIC POINT MACHINE ROTARY LOCKING TYPE HIGH THRUST OF 220 MM THROW, AC IMMUNITY 160 VOLT AC, NON - TRAILABLE TO OPERATE ON 110 V DC COMPLETE WITH LOCK AND DETECTOR SLIDES AND CABLE TERMINATION BOX, AS PER RDSO SPECIFICATION NO. IRS : S- 24/2002 AMENDMENT - 1 OR LATEST AS PER DRAWING.NO. RDSO/S-11000 WITH EXTERNAL CLAMP POINT LOCK AS PER DRG. NO. RDSO/S-3395 AND WITH COMPLETE SET OF GROUND CONNECTIONS WITH NYLON INSULATIONS AS PER DRG. NO. RDSO/S-3454 FOR 60Kg RAILS. THICK WEB SWITCH. LATEST ALTERATIONS IF ANY ARE APPLICABLE TO BOTH DRAWINGS. This

or latest 20.1 The following set of tools in a suitable tool box shall be supplied along with every set of eight point machines or less. i). Hand operated square drive socket wrenches of 12.5 mm driving square (short type) as per IS: 7381 for M8, M10, M12 & M18 threads. (One 250 mm long 12.5 mm square extension bar as per IS: 7991 alongwith compatible Tee handle Square drive as per IS: 7975 suitable for above socket wrenches shall also be provided.) ii). Open jaw wrenches (spanners) for M10, M12, M20, M24 & M33 threads as per IS: 2028. iii). Adjustable wrench. iv). Screw driver 300 mm long. 20.2 Junction box and two numbers of telescopic pipes of approved type shall be supplied as an integral part of the point machine. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply.

Description:- Fixing, wiring, testing and commissioning of Electrical Point Machine on the extended sleepers at points as per std. practice and as per RDSO Drg No. SA 9151-52 or 9710 or 9161 or

insulation for switch extension bracket, fixing ground connection, adjusting opening of the switches and adjusting the point machine with crank handle.The item also includes : (i)Complete material for installation like ground-connections, switch extension brackets, point insulation material, I pipes, wiring materials, various fixing nuts & bolts including castle nuts, spring washers (ii) All smithy &

insulation for gauge tie plate (Insulation in William Stretcher Bar will be Provide by Railways). (iv) Wiring inside the point machine, insertion and termination of tail cable in point machine and junction boxes / location box /cable hut as per extent practice on NWR and the instruction of Railway Engineer at site. (v) Supply and fixing of suitable size GI pipes with flange for taking cable into point machine. Note ; The ground connections shall be suitable to the Point Machines as specified by Engineer-in-charge and shall be suitable to the point lay out i.e. 60 Kg. / 52 Kg / 90R as per yard layout. Electrical Point Machine and M-6 / Screw less terminals will be supplied by Railways / covered in Schedule separately Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Commissioning.

Description:- Supply of Gauge Tie plate insulation as per RDSO/SPN/168/2005 as per RDSO drg No: T- 10372Alt2, T- 10368, T- 10371Alt2, T-15083/88/Alt2 & T-11690/Alt2 and as per RDSO/SPN/168/2005 with latest amendments as applicable. Gauge tie plates (52 Kg/60Kg as per site requirement) Insulation for (BG) complete with insulating bush and washer each set comprising of:

bushing for insulated stretcher bar BG as per RDSO Drg.No.T10368 - 3 Nos. (c) Insulating Washer for insulated stretcher bar BG to IRS 40/84 as perRDSO drg.No.T-10371 - 6 Nos. Inspection: (i) RDSO/RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply

10 AJMER DIVISION-S AND T/NORTH WESTERN RLY 10 Description:- Supply of William Stretcher Insulation Set (complete) as per RDSO/SPN/168/2005 with insulating bush and washer to suit point layout and conforming to RDSO Drg.No.T-10372 or latest, T-

comprising of (a) Insulating plate for leading insulated stretcher bars BG as per RDSO Drg.No.T-

Drg.No.T-10535- 4 Nos. (c) Insulating Washer for insulated stretcher bar BG as per RDSO drg.No.T-

side plate for insulated stretcher bars BG as per RDSO Drg.No.T-10367 - 3 No. (b) Insulating bushing for insulated stretcher bars BG as per RDSO Drg.No..T-10368 - 6 Nos. (c)Insulating washer for insulated stretcher bars BG as per RDSO Drg.No.T10371 - 12 Nos Inspection: (i) RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply

No.SA-20161-66/M or latest. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply.

Description:- Supply of Track Lead Junction Box(TLJB) as per Drg.No.RST-11509 or latest made from FRP material including brass bolts and hylam board sheet with terminals etc. The technical specifications are as follows: (a) TLJB complete with cover to be in black/red having approximate weight of 4.0 Kg with L-262mm W-212mm and H 90 mm and all the holes required for mounting on FRP stump (verticall two for each FRP angle) HDPE pipe , cable etc. (b) Each TLJB shall have two bakellite terminal block fitted horizontally : each bakellite terminal block shall have two nickel chrome plate M10 brass terminal, 50mm long.Alongwith each TLJB , nickel chrome plated brass

of size 32/35mm , 380 mm long alongwith two nuts for fixing on the TLJB hole . (d) The FRP stump for mounting the TLJB to be made of one meter long 30mm X30mmX 4mm angle(2 nos.) and 300mm long 30mm X30mmX 4mm angle(1 no.) fixed at 50 mm from the bottom using galvanised nuts and bolts.The TLJB and the agles for stump should come alongwith holes on them for fixing using galvanised nuts and bolts of adequate strength to be supplied alongwith TLJB drawing no. 11509. Inspection: (i) RITES if value of item in work more than 5 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 5 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply

Description:- Erection, Fitting and Rail connection of Track Lead Junction Box on two supports (FRP

connections on rail. The work shall be done as per instructions of Rly engineer at site. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after execution.

bonding wire as per spec No IRS S 17 & RDSO Drg No. S-69/M. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply.

Consignee Inspection Charges: None Payment Terms: 100% after Supply.

Description:- Provision/Installation of bonding with GI wire 4mm dia ( 8 SWG) for track jumper &

provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly. Engineer at site. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Execution.

Consignee Inspection Charges: None. Payment Terms: 100% after supply.

Description:- Cement concrete work for miscellaneous items in ratio 1:3:6. Item includes

(aggregate will not exceed beyond 3.8 cm). The aggregate cement and sand will be supplied by contractor. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after installation.(Unit is per cubic meter)

Description:- Supply of Steel Plain Almirah with 4 adjustable slavesSize: 1980mm height, 915 mm

Consignee Inspection Charges:None Payment Terms: 100% after Supply. AJMER DIVISION-S AND T/NORTH WESTERN RLY

Description:- Fixing of ARA(M-6) Terminals /Screw less connectors / modular disconnect terminal

This includes provision of two additional holes on the board on either side for cable conductor entry. (Supply of all above terminals have been covered separately in Chapter 4 of SOR) Inspection: Consignee Inspection Charges: None Payment Terms: 100% after installation.

Description:- Supply of Medium class GI pipes 100 mm dia(4.5 mm thickness) as per IS 1239 ( Part

arrangement. Contractor will also supply flexible/corrugated HDPE pipe at the end of GI pipe to protect the cables from sharp edges and sudden bends. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Supply.

Description:- Fixing of Medium class GI pipes 100 mm dia(4.5 mm thickness) as per IS 1239 ( Part

arrangement. Contractor will install flexible/corrugated HDPE pipe at the end of GI pipe along with any masonry work(if required) to protect the cables from sharp edges and sudden bends. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after installation.

per RDSO spec IRS/TC-77/2012 revision 3 With latest Amd. Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply

Description:- Horizontal Drilling by using manual pushing method at minimum depth of 1.5 meter

under this item Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution

Description:- Removal of excavated/slip earth/ debris/ malba from the site of works to any other place outside Railway land/premises, including all excavations, handling, re-handling, loading, unloading and leading, etc. all labour and material as a complete job. Removal of Earth (all kinds of

berms in cutting, water way of bridges, over coping of toe/breast/retaining walls etc. including crossing of nallah, railway tracks, making/repairing approach roads if required, all lead, lift, ascent, descents, or any other obstruction. Earth spoils to be dumped outside the cutting or railway embankments as per direction of Engineer in charge Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution(Unit is Cubic Meter)

Description:- Excavation of cable trench as per cable route plan, 1.2 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr. wide at bottom as per RDSO sketch No. SDO/CABLE LAYING/003 or latest alongside the track in normal (all type) soil/strata, conforming to distances as per cable route plan and refilling. This work includes clearing of route from bushes etc, covering of cable laid in trench by loose soil for a

extant practice on North Western Railway and instructions of Railway Engineer at site. In case 1.2m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1.2m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1.2m. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution( Unit is Cubic Meter)

Description:- Digging of cable trench 0.3 Mtrs. Deep and 0.3 Mtrs. Wide on Asphalted Platform / Road / Hard rocky area. Refilling with earth leveling of trenches & restoring the original surface of trenches.The sharp edges will be smoothened out in bottom of the chase and will be leveled properly. In hard rocky ground area , cables will be laid normally on layer of shifted earth of 0.05 mtrs thickness previously deposited at bottom of the trench and cables will be covered with layer of sand or shifted earth of 0.1 mtr thickness. In case sharp edges of rocky ground can not be protected

case number of cables are large RCC duct will be used. In isolated cases, it can be given smooth surface by using either masonry bricks or cement concrete. A row of bricks shall then be placed length wise on the top and jointed with cement mortar and layer of concrete with cement plaster shall be provided on top of the same. Note: This item in hard rocky area will be operated only where normal depth i.e.l.2 mtr is not possible and it will be decided by site engineer/unit officer incharge of work. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution( Unit is Cubic Meter)

AJMER DIVISION-S AND T/NORTH WESTERN RLY Description:- Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ DWC pipes/ Trunking. This also includes laying of cables in track crossings & road crossings. Item

each cable to give the cable number at each Gantry Post/hectometer post.(Cables will be meggered before and after its laying by contractor under supervision of Railway Representative and he will submit the meggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution(unit is RM running meter)

Description:- Providing brick masonry in ratio 1:6 cement and mortar including plastering with 1:4

including excavation, curing, grouting, bolting etc. wherever required. Bricks sand and cement to be supplied by the contractor. Inspection: Consignee Inspection Charges: None. Payment Terms: 100% after Execution(Unit is cubic meter) S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () B-NS ITEMS 99128.58 B 75.00 Numbers 69.62 5221.50 AT Par 5221.50 Description:- Supply of Plastic cover for 2 (Two) Aspect Signal Unit Cover opened from front side and bottom side and made of black polythene sheet of 150 micron thickness. Size:- 1200mm X

Dia. and 4mtr length to be provided on front side and of 1.5 mtr length at centre. NOTE - Sample should be approved before bulk supply. Make/Brand: self. Inspection agency : Consignee.( Warranty Period : Upto 12 months from the date of supply) B 50.00 Numbers 92.04 4602.00 AT Par 4602.00 Description:- Supply of Plastic cover for 4 Aspect Signal Unit Cover is opened from front side and bottom side and made of black polythene sheet of 150 micron thickness. Size :- 1700 mm X 460 mm

micron thickness to be provided. To tie up cover with signal unit suitable nylon rope of 5 mm Dia. and 4 mtr length to be provided on front side and of 1.5mtr length at center. NOTE - Sample should be approved before bulk supply. Make/Brand: self. Inspection agency : Consignee. ( Warranty Period : Upto 12 months from the date of supply). B 200.00 Numbers 75.52 15104.00 AT Par 15104.00 Description:- Supply of Plastic Cover For 3 Aspect Signal Unit, Cover Is Opened From Front Side And Bottom Side And Made Of Black Polythene Sheet Of 100 Micron. Thickness. Size: 1300mm x

Of 100 Micron Thick Ness To Be Provided. To Tie Up Cover With Signal Unit Suitable Nylon Rope Of 5mm Dia. And 4 Mtr Length To Be Provided On Front Side And Of 1.5mtr Length At Centre Make/Brand: self. Inspection agency : Consignee.( Warranty Period : Upto 30 months from the date of supply). B 29.00 Numbers 41.30 1197.70 AT Par 1197.70 Description:- Supply of Plastic Cover for Calling On Signal Unit Cover Open from Front & Bottom side of UV protected Black Polythene Sheet of 150 Micron thickness of size 300mm x 300mm x

thickness. Cover to be provided with Suitable Nylon Rope of 5mm Dia. and 1.5 meter length. (sample to be get approved from consignee before bulk supply). Make/Brand: self. Inspection agency : Consignee.( Warranty Period : Upto 12 months from the date of supply) B 10.00 Numbers 4406.83 44068.30 AT Par 44068.30

Current 0 - 2A/20A/100A, JAW Capacity 17mm. Make UNIT-1 Model No. UT 210E, METRAVI Model No.

B 4.00 Set 5972.72 23890.88 AT Par 23890.88 Description:- "Supply of RE Tool Kit for signal maintenance with following itemes (with small size can was log) (i). Insulated combination plier of "" = 1 No (ii). Insulated long nose pleir (Road wise) 6"" = 1 No (iii). Insulated wise stroper piler 6"" = 1 No (iv). Insulated Screw driver set (5 piece) = 1

Insulated Double end spanuer set (6 to 32 mm) = 1 set (viii). Insulated Adjustable spanwer set 8"" =

LED (3cell) exeredy/Jeep = 1 No (xii). Auto Ranging digital multimode (Meeco/Rishabh) = 1 No.Inspection by Consignee." B 210.00 Numbers 24.02 5044.20 AT Par 5044.20

similar.Inspection by Consignee. AJMER DIVISION-S AND T/NORTH WESTERN RLY