ADDN ALTN OF KITCHEN AND TOILET OF MD ACCN AND CONNECTED BR WORKS AT SANJEEVANI LINE AND PROVN OF ATTACHED TOILET FOR ADVANCED URODYNAMIC SYSTEM AT UROLOGY DEPT AT BASE HOSPITAL UNDER GE (EAST) DELHI CANTT-10

Taking down cement/grit plaster on brick wall or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. & removing debris out side MoD land Complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding and including disposal of all debris out side MoD land Complete.

Dismantling stone slabs and tiles of any description or thickness in floors, apron etc, complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes etc, complete all as specified and directed.

M&L for Non skid ceramic tiles7mm to 8mm thick Ist quality ceramic coloured of area of each tile exc 0.11 Sqm but not exc 0.18 Sqm (400x400mm) in flooring set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, complete all as specified and directed.

M&L for Coloured glazed ceramic tiles of 350 x 250 x 7mm thick or 450 x350mm size, 7mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over and incl 10mm thick rendering/ backing coat in CM 1:4, complete all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates)

M & L 15 mm thick rendering in cement mortar (1:6), on brick or concrete wall surface, finished fair & even without using extra cement, complete all as specified and as directed.

M & L 5 mm thick rendering in cement mortar (1:3) on ceiling surface, finished even & smooth without using extra cement, complete all as specified and as directed.

Demolition of brick work built in cement mortar of any description and including disposal of all debris out side MOD and complete all as specified and directed.

M&L for preparation of new/old plastered surfaces of wall and applying two coats of Oil Bound Distemper on plastered and other surfaces with alkali resistant priming, complete all as specified.

M&L for preparation of new/old plastered surfaces of ceiling and applying two coats of Oil Bound Distemper on plastered and other surfaces with alkali resistant priming, complete all as specified.

S & F 32 mm dia waste Pipe, for WHB & urinals, complete all as specified and directed.

S&F in replacement wash hand basin viterous china, white, flat back 550 x 400mm including CI bracket and cutting for and pinning in ends of brackets etc complete.

S&F as in replacement 32 mm dia Waste fittings, brass, chromium plated for wash hand basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed.

S&F Pillar taps with swan neck, cast copper alloy, with capstan heads, chromium plated, Fency type, screwed down high pressure, with or without lettered `Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed. (Make:- Jaquar/ CERA/ Hindware)

S&F Grating doom 125 mm dia with waste hole of ptmt/fency type.(Minimum weight 40gms)

Dismantling of CI pipes/PVC pipe & fitting of any description & position up to 110 mm dia, complete all as specified & directed.

S&F as in repairs PVC (SWR) multi floor trap with grating including jointing with solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) out let dia 75mm complete.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls using PVC clamp suitable for 75mm bore PVC (SWR) pipe complete.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete.

S&F PVC (SWR) couplers 75mm bore including jointing with solvent cement complete all as specified.

S&F PVC (SWR) reducers 110X75 mm including jointing with solvent cement complete all as specified.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification.

S&F powder coated aluminium of various section as required for frame of windown/ventilators etc with one or more rebates including jointing cleats for fixing etcetc. all as specified and directed.

S&F 4.8mm thick sheet glass ordinary quality in Squre/rectangle exc 0.5 sqm each pane coloured and fixed with glazing pins and rubber beading etc in alum door/partion etc complete all as specified and directed.

S&F 100mm size stainless steel butt hinges fixed with stainless steel screw complete.

lts of extruded section and fixed complete.

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

S & F 25 mm bore galvanized steel tubing 'medium grade' with all fitting and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S & F 20 mm bore galvanized steel tubing 'medium grade' with all fitting and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S & F 15 mm bore galvanized steel tubing 'medium grade' with all fitting and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

S & F 1000 litres capacity rotaional moulded polythene water storage tanks triple layer ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-I incl one 20MM ball brass valve with polythene float and fly nut complete all as specified and directed

S&F in replacement 20 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 M in depth and getting out in any type of soil, complete all as specified and directed.

M&L for hard core broken stone of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, water and rammed to a true surface, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 M mean radius, using old sise bricks built in CM 1:6, complete all as specified and directed.

M&L for 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate), complete all as specified and directed.

M & L for 100mm thick PCC 1:4:8 type D2 (usign 40mm graded stone aggregates) or in sub base of floor all as specified.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in sub base of floors, finished the surface even and rough, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300x600x7mm thick on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over and incl backing coat/ rendering cement plaster in CM 1:4, 10 mm thick for receive wall tiles etc, complete all as specified and directed.

M & L for preparation of new plaster surfaces and applying two coat distemper oil emulsion over 2 mm thick wall care putty on walls as levelling course complete all as specified and directed.

M & L preparation of newly plastered

surfaces and applying three coats of white wash in ceiling.

S&F 20 mm stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both ends for iron pipe 20 mm dia, fixed complete all as specified and directed

Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified

Supplying and laying of 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified

S&F 20 mm bore Brass Elbow for fixing of CPVC pipe

S&F Brass Elbow (3/4 X ½) mm for fixing of CPVC pipe

S&F 20 mm Brass Tee for fixing of CPVC pipe

S&F 20 mm Male Brass Threaded Adaptor (MTA/ MBTA) ) for fixing of CPVC pipe

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineering- Charge. (Note: stainless steel butt hinges shall not be paid separately).

S&F 200mm long aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

S&F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F Aluminium windows or ventilators partly fixed and partly top hung with glazing bars, complete all as specified and directed.

S&F 3mm thick figured sheet glass Pin headed and glazing with oil putty in squares not exc 0.5 Sqm in each pane, complete all as specified and directed

S&F 15mm bore brass CP WHB mixer swan neck type for mixing hot & cold, elbow operated water screwed down for iron pipe and fixed complete. (Make : Jaquar cat part No. KUP-35011-BPM or equivalent as per approved make list)

S & F ready made wall / floor mounted Vanity box made of HDHMR board, both side laminated and front side melamine surface, consisting of the following combination :- (a) Wash Hand Basin 620 mm x 460 mm including brass waste cupling (b) Base Cabinet 585 mm x 445 mm x 480 mm. Make : Hindware - DTC brand (Element Soft OAK color) or equivalent make as per approved make list)

S & F Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover , flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar cat part No. ONS-WHT- 10853S300 UFSM or equivalent as per approved make list).

S&F health faucet with 1 m long flexible tube in brass CP finish in cluding wall hook for EWC complete all as specified. (Make : Jaquar cat part No. ALD- 587 or equivalents per approved make list).

S&F for CP toilet paper holder fixing to wall with SS screw compete all as specified and directed.(Make : Jaquar cat part No. ACN- 1153S or equivalent as per approved make list).

S&F PVC connections of 15mm size with PTMT nuts of 600mm long, complete all as specified and directed.

S&F bib taps chromium plated 15mm alloy with crutch or butter fly handle screwed down longwboy for iron pipe 15mm bore, complete all as specified and directed

S&F Stainless steel Towel Rail 600mm Long fixed with and including chromium plated brass screws

S&F PVC Solid Waste Pipe 32 mm dia for WHB complete all as specified and as directed. Make : Prayag Cat No : 3271 or equivalent in Hindware/ Cera.

S&F 15 mm bore angle stop valves cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed withr iron pipe of union.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long.

M&L for 75mm dia of outlet, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F grating dome 100 mm dia of PTMT (minimum weight 25 gms) complete all as specified nad directed.

M & L for PVC (SWR) P/S trap/ gully trap of 125/ 110 mm setting and jointing with solvent cement.

M&L PCC 1:4:8 type D-2, using 40mm graded stone aggregate as in bed of drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150mm dia of pipe complete all as specified and directed

M&L for 150 mm dia SWG pipes grade ‘A’ laid in trenches and jointed in cm 1:1 complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth inished and reforming benching as required for 150 mm dia SWG pipe complete all as specified and directed.

S& F Tubular towel rail CP, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws

S&F GI powder coated snap grid frame work for false ceiling (Size of grid 605X605 mm) complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F 4 mm thick Eco building board fixed or laid/inserted to GI/ Aluminium framework with screws complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in any type of soil.

M&L Cement concrete (1:3:6) (using 40 mm graded stone aggregate) as in foundations, filling and mass-concrete complete all as specified.

S&F mild steel rolled sections, Framed work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, using FE-290 (Gde-E-165) complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paints over and including one coat of red oxide primer complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of approved colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, Chajja etc fixed with self tapping screws as specified, high tensile alloy steel trap sheet having 55 MPA yield strength and zinc (galvanized ) + Aluminium combined, coating of 150 GSM /PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to7 micron Epoxy primer fixes, RMR 10

40 profile width 1125 mm complete all as specified & as directed.

M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing the top layer with wire brushes and water to expose the stone chippings includind forming groove of uniform size 15mm wide and 15mm deep as per approved pattern complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and makinggood disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for point wiring concealed type with 1.5 sq mm Nominal cross sectional area, single core, 1100 Volt grade, multi stranded, PVC insulated, unsheathed FRLS copper conductor cable and connected to common earth and earth dollywith suitable copper lugs and drawing into and including rigid non-metallic PVC Concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit (including cutting chasing concealing of conduit and making good disturbed sufrace complete in all aspect) accessories and modular metal flush box,modular white cover plate with frame, blanking plate , T Cover etc suitable for upto required module etc complete and making good disturbed surfaces to match the existing for one light / bell / fan point controlled by one, one way switch 06 Amp, complete all as specified and as directed.

Description all as per item No. 145 here in before but for one three pin, 5 Amp, socket out let on same board, complete all as specified and as directed.

Description all as per item No. 145 here in before but point wiring with 2.5 Sqmm, multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor, complete all as specified and as directed.

Description all as per item No. 145 here in before but point wiring with 4 Sqmm, multistranded, copper conductor cable, for Geyser point on independent board with 4 Sqmm size earth conductor complete all as specified and as directed.

S&F modular switch, 1 way, 6 Amp, 1 Module, complete all as specified and as directed.

S&F modular Socket, 6Amp, 2/3 Pin, combined, 2 module complete all as specified and as directed.

S&F modular switch, 1 way, 16 Amp, 1 Module, complete all as specified and as directed.

S&F modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 module complete all as specified and as directed.

S&F Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt, fixed in position & connecting complete all as specified and as directed.

M&L in replacement for sub main wiring with 2 runs of 4 sqmm single core, PVC insulated & unsheathed FRLS cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit 25 mm medium grade as per IS and one run of 4 sqmm size earth wire PVC insulated copper conductor complete all as specified and directed.(Note Two runs of 4 sqmm copper FRLS cable & one run of 4 sqmm copper cable in and including 25 mm PVC conduit medium grade will be measured as one unit.

Supply, fixing and connecting of Slim LED Batten18/ 20 watt with Surface/Wall Mounted integrated LED 4 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 20W Led should be 2000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed.

Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting .

Supply and Fixing of five star rated Geysers white blue in colour capacity 25 Ltr, Electric Driven, Single phase, 240 V, Storage vertical type and heating element 2 KW, inner shell made up of copper, automatic cutoff,manual tempreture setting , maintaining 8 bar pressue including electrical and water connection with hot and cold water connection pipe (PVC type) and fixed on the wall with mild steel fastner 150 mm long and 10 mm dia with pin and bolts complete all as specified and directed.

S & F PVC Exhaust Fan 250 mm sweep 240 Volt, 1325RPM , Air delivery 500 CMM connection with self closing louver frame flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed.

S & F Heavy Duty Metallic Exhaust Fan 300 mm sweep 240 Volt, 1400 RPM , Air delivery 500 CMM connection with self closing louver frame flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed.

S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps , 240 Volts complete all as specified and directed.

Supply, fixing and connecting of Slim LED Batten 9/ 10 watt with Surface/Wall Mounted integrated LED 2 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable for White Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to 2.5 KV . Total system Lumen of 20W Led should be 2000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. Make-

S & F for distribution board double door type, SPN, 04 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S & F for distribution board double door type, SPN, 04 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S&F as in replacement CP soap dish, complete all as specified and directed (Make : Prayag or jaquar/equivalent) (Make:- Jaquar/ CERA/ Hindware)