203 H(F)(W)/2023-24

Amount

Part - A ( Material) Following Material Supplied by the Contractor:-

Supply and Laying of G.I. Pipe 6'' dia with Clamp and Nut Bolt

Supply and Laying of HDPE Pipe 6'' dia with all requried accessories and Jointing

Supply of Pre Cost of Pannel Base

Supply of Copper L Piece 62x225x12 mm

Supply of Lug All Type with different Size

Carriage including loading,unloading & Proper stacking of following Stock materials from store/departmental store to Dump site distance 0 to 20 Kms. (distance approx)

ST Pole 11 Mtr. long (540 sp-52)

11 KV XLPE Insulated Armoured Al. Cable of Size 3x185 sqmm

11 KV Cable Jointing Kit outdoor 3x185 sqmm

11 KV Cable Jointing Kit Staight Through 3x185 sqmm

Single Core XLPE Insulated Aluminium Cable 185 sqmm for Jumpring

Transformer 250 KVA 11/.4 KV

LT XLPE Cable Alluminum 1x400 sqmm

Distribution Pannel (A- Type)

33 KV Control Pannel for Single T/F

33 KV outddor VCB wit Structure

Other Line material i.e. cross arm / conductor / pin insulator / stay / earthing/cable Box etc. except A.B Cable.

Dragging of ST Pole as per RESPO Norms.

Fabrication and Erection of Double Pole Support on ST Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Grouting and Binding of 11 KV Stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles by Ms Earthing rod of 20x2500 mm and 6 swg earthing wire etc.as per RESPO Norms

Construction of Plinth of Transformer Size 2x2x2.5 Mtr including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Fencing of Transformer Plinth with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Chemical Pipe for Earthing (all the material will be supplied by the contractor.)

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Laying of 11 KV XLPE Cable 3x185 sqmm in Trunch/Duct

Installation of Heat Shrinkable Type cable jointing kits outdoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Mounting of 250 KVA Transformer as per RESSPO Norms.

Shifting Erection and Commission 250 KVA or 400 KVA old DTR

Shifting Erection and Commission 25-100 KVA old DTR on DP

Shifting,Erection and comissioning of Existing A-panel with pre cast and other

Laying of LT XLPE Cable Alluminum 1x400 sqmm as per RESSPO Norms.

Installation of Distribution Pannel (A- Type)

Installation of 33 KV Control Pannel for Single T/F

Installation of outdoor VCB With Structure

Dismantling of 11 KV line

Laying of HDPE Pipe 6'' dia

ALOK KUMAR SINGH

M/s Shukla Enterprises