Mechanical Equipment Purchase

SINGLE PHASE AC CIRCUIT KIT FOR VOLTAGE, CURRENT AND POWER MEASUREMENT- 5A,300V, 300W/5A Measurement of power by using various loads Analog voltmeter 0-300V AC panel mounted Analog Ammeter 0-5A AC Panel mounted Analog wattmeter 1.5KW AC Panel mounted Single phase Digital Power monitor to measure power Single phase AC lamp load 230V/5A 1KW Panel enclosure with Hylam front panel with input/output terminal outlets

MCB ELCB TRAINER KIT- 1 phase/3 phase, 2/3/4 pole, 3A-16A Single pole MCB 2-5Amps Two pole ELCB 30mA Lamp load single phase 5Amps Panel enclosure and terminal outlets

FOUR STROKE PETROL ENGINE CUT SECTION MODEL - ● Single cylinder four stroke petrol engine cut sectional model with carburetor, spark plug, cut cylinder, piston, connecting rod, crank shaft, valve mechanism, cam shaft, timing gears and flywheel. ● All parts cut opened to study the components and its working ● Provision to take values for valve timing. ● Surface Finish: Painted and color coded for easy identification of components ● Mounting: Heavy-duty MS fabricated stand/base ● Display Type: Static / Dynamic demonstration Model

DC MOTOR - Type: DC Shunt Motor (Dismantling Model) ● Power: Minimum 0.5 HP ● Voltage: 220 V DC ● Speed: 1500 RPM ● Poles: 4 pole ● Construction: ● Laminated stator ● Salient poles ● Accessible armature Features: ● Cut section / open type ● Suitable for dismantling and reassembly

HYDRAULIC CYLINDER - Bore Diameter: 50 mm ● Stroke Length: 250 mm ● Working Pressure: 160 bar ● Cylinder Tube: Honed steel ● Piston Rod: Hard chrome plated ● Seals: Standard industrial seals ● End Caps: Steel Supply: ● Mounted on training base ● Suitable for dismantling and inspection

BEARING WITH SHAFT ASSEMBLY - ● Type: Dismantling and assembly teaching unit ● Shaft Diameter: 30 mm ● Shaft Material: EN8 steel ● Bearings: Deep groove ball bearing (6205 / 6206) ● Housing: Cast iron ● Locking arrangement: ● Circlips ● Lock nuts ● End covers Mounting: ● Bench-mounted / frame-mounted unit

COUPLING UNIT USING DRIVING AND DRIVEN SHAFTS USING PLUMMER BLOCK BEARING UNIT- ● The Plummer Block Housing Material: Cast Iron (Grade FG 200 or equivalent). Type: SNG or SNL Series (Split-type housing). Sealing: Felt seals or V-ring seals (to demonstrate lubrication retention). Lubrication: Provided with a grease nipple at the top center for manual lubrication practice. ● The Bearing Type: Self-aligning Ball Bearing (1200 series) or Spherical Roller Bearing (22200 series). Bore Diameter: Standard 25mm or 30 mm. ● Shafting and Coupling Shaft Material: Ground Carbon Steel (EN8 or EN9) for high surface finish. ● Coupling Type: Flexible Coupling: To demonstrate the bearing's ability to handle slight misalignment. ● Rigid Flange Coupling: To demonstrate traditional direct connection. ● Driving/Driven Setup: One shaft connected to a small Electric Motor (Driving) and the other to a Brake Drum or Load (Driven).

(A).SLIDING MESH GEAR BOX FOR DISMANTLING AND ASSEMBLING - (A) ● Max Transmitted power 1to1.5HP, ● Torque capacity- 40 to 200Nm, ● Number .of speed 3 to 6, ● Gear module 1.5 to 2, ● Sliding Mesh Gearbox ● Gearbox Type- Sliding Mesh Forward Gears- 3 Reverse -Yes ● Gear Material -Alloy Steel ● Lubrication- Splash / Oil ● Gear Teeth- Spur ● Typical Gear Ratios- 3.2:1 / 2.0:1 / 1.3:1 ● Input Speed- 0–1800 RPM ● Housing Material- Cast Iron (B) CONSTANT MESH GEAR BOX CUT SECTION - ● Constant Mesh Gearbox (Cut Section) ● Gearbox Type :Constant Mesh ● Forward Gears :4 ● Gear Teeth -Helical / Spur ● Dog Clutch Type- Sliding ● Lubrication -Oil SAE 80W90 ● Housing- Cut Section ● Material -Hardened Alloy Steel Educational Features-Labeled parts.