PROVN OF ADDN/ALTERATION OF CK HOUSE AT KLP-02 OF THE SIKH LI REGT CENTRE AT FATEHGARH CANTT AND PROVN OF COVERED IRON GRILL WITH IRON GATE AT BLDG NO-T-05 (SURG WARD) OF MIL HOSP FATEHAGRH

Amount

M & L for Cement concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in sub base, filling and mass concrete etc complete all as specified and directed.

M&L for RCC (nominal mix) type B-1 (1:2:4) using 20 mm graded stone aggregate as in Slab Supported on walls, beam and column in floor, roofs, landings, balconies, deck slab and in shelves complete all as specified and directed.

M & L Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cm (1:6) complete all as specified and directed.

S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S Frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side & as gap insert for tip rail & bottorm rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/seated to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing specified in SSR part -II 2020 complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing specified in SSR part -II 2020 complete all as specified and directed.

S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed

S&F for MS TMT bars 10 mm dia and over , cut to length , bent to shape required incl cranking bending spirally for hooping for coloumn hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed

S&F for Expanded metal in available size weight not exc. 4.00 kg per Sqm complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Taking down cement plaster on brick wall or stone wall etc. including raking out joints hacking for key, scrubbing down with water etc and disposed off unserviceable material of out side MD land compete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden/metal frame or stone concrete or brick surround, glazed with putty or fixed with beads complete all as specified and directed

Demolition of brickwork masonary built in lime or cement mortar including all quiens arches, pillars etc. But including concrete articles complete all as specified and directed

M & L for 18-20 mm th Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15 mm thick screed bed in CM 1:6 compete all as specified and directed.

M & L for machine cut kota stone slab in flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed

M & L for Glazed ceramic tiles in vertical surface 350x 250x 7mm / 450 x 300 x 7mm thick coloured tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match, over and inlcuding 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and fair without using extra cement, shade & design of tile as approved by AGE (I) etc compete all as specified and directed.

M&L 5mm thick cement plastering in cement mortar (1:3) on on ceiling surfaces even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick cement plastering in cement mortar (1:6) on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement complete all as specified and directed

M & L for 15mm thick rendering in cement mortar 1:4 on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement complete all as specified and directed.

M&L for non skid ceramic any coloured/printed tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor of shade & designed as approved by AGE(I), set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles, over and including 15 mm thick screed bed in cement mortar (1:4) in floorse etc complete all as specified and directed.

M & L for preparation of old plastered surfaces of walls and making surface smooth and applying two coats of OBD complete all as specified and directed.

M & L for preparation of old plastered surfaces of walls and making surface smooth and applying two coats of cement base paint complete all as specified and directed.

M & L for preparation of new plastered surfaces and applying Two coats of Oil bound distemper over a coat of chalk whitening complete all as specified and directed.

M&L for preparation of new plastered surfaces & applying 2 coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparation of old plastered surfaces of ceiling and making surface smooth and applying two coats of white wash complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

S&F Rolled Mild steen in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W (Gde- E- 250) quality-A complete all as specified and as directed.

S&F rolled mild steel section in framed work as in doors or gates of angles or other section with gussset plates ,rails ,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging ,of grade Fe -290 (E-165) complete all as specifeid and direcetd.

M/S S P CONSTRUCTION (BID ID -3183909)