ELECTRICAL WORK

Amount

INCREASING CAPACITY OF T/Fs FROM 25 KVA TO 63 KVA AT VILLAGE RASOOL PUR, DAULAT PUR, VISAYAK PUR, DARYAR KHEDA, PURE KUMEDAN SARENI, EMANATING FROM 33/11 KV S/S LALGANJ GRAMEEN (TOTAL 05 Nos.), UNDER EDD LALGANJ.

Carriage of 63 KVA T/F and other related materials from ESC Tripula to work site with loading- unloading and proper stacking at a Place.

Dismantling of old existing 25 KVA single PhaseT/F, then stacking of dump site with loading unloading,

Mounting of 63 KVA T/F on existing D/Pole/Four Pole Structure alongwith fitting of all related accessories, earthing of T/F body & neutral As per RESPO norms.

Laying , stringing & sagging of ACSR Weasal Conductor including all associated work & making clearance of Road with Joint/jumpers & binding on insulators as required.

Earthing of T/F body & neutral as per RESPO norms.

Recd. Back 25 KVA old singel Fase T/F from site to ESC Tripula, Raebareli wilth loading unloading.

Installation/Fixing of Alluminium Cable 3.5X70 sq.mm

INCREASING CAPACITY OF T/Fs FROM 63 KVA TO 100 KVA AT VILLAGE DATAULI , LALGANJ, EMANATING FROM 33/11 KV S/S LALGANJ RURAL. UNDER EDD LALGANJ.

Carriage of 100 KVA T/F and other related materials from ESC Tripula to work site with loading- unloading and proper stacking at a Place.

Dismantling of old existing 63 KVA 3 PhaseT/F, then stacking of dump site with loading unloading,

Mounting of 100 KVA T/F on existing D/Pole/Four Pole Structure alongwith fitting of all related accessories, earthing of T/F body & neutral As per RESPO norms.

Earthing of T/F body & neutral as per RESPO norms.

Recd. Back 63 KVA old singel Fase T/F from site to ESC Tripula, Raebareli wilth loading unloading.

Installation/Fixing of Alluminium Cable 3.5X150 sq.mm

INCREASING CAPACITY OF T/Fs FROM 100 KVA TO 250 KVA T/F AT GURBAX GANJ CHAURA, LALGANJ, EMANATING FROM 33/11 KV S/S LALGANJ. UNDER EDD LALGANJ.

Carriage of 250 KVA T/F and other related materials from ESC Tripula to work site with loading- unloading and proper stacking at a Place.

Dismantling of old existing 100 KVA T/F, then stacking of dump site with loading unloading,

The work for Earthing, Fensing and excavation of new Plinth size 2.00X2.00X1.50 for making outer wall of Plinth by 1st class brick work in Cement mortar of ratio1:6 of filling earth in Plinth and providing Ston ballast and fixing 02 No.90 Iballs Rail pieces (6.9 Mtr) of proper distance and then plastering the top and all side of plinth wall with cement Corse and sand in ratio 1:4 and then proper spraying of water alongwith All materials & Labour for Mounting of 250 KVA T/Fs on Plinth alongwith fitting of all accessories,under BUSINESS PLAN 2023-24, as per RESPO Norms.

Labour Charges for earthing of 250 KVA 11/0.4 KV Power Transformers completed for digging of 60 fit Borewell type pit (1.5-inch diameter) to install 60 fit long M.S. Pipe (60 fit long) with 1.5-inch diameter work followed by connection of M.S. Stirp 50X6 mm size for Suitable length to G.I. Pipe through proper welding ( Aluminium paint covering of welded joint) with tightening of nuts & bolts and fitting of spaces by homogeneous mixture of coke & sault against medium power transformer body and neutral earthing these includes connection of M.S Strip fot sepret common pit as there will be one pit of each earthing. All rewuired material will be provided by contractor.

Making/Errection/Installation/painting/gouting/welding/febrication/earthig work of Wirmesh Fancing of Jali alongwith Angle isn size of 35X35X5X2500 mm with Nut & Bolts, Washer, Earthing Rod & G.I. wire. Making of 01 No. Gate by M.S. Angle in size of 35X35X5X1000 mm with Nut & Bolts Washer, Earthing Rod & G.I. wire. One No. Gate of M/S Angle in size of 25X5 mm with wiremesh and each of the same. Grouting of M.S. Angle and other required Angles with Grouting materials as per RESPO Norms, under BUSINESS PLAN 2023-24, under EDD Salon, Raebareli. All rewuired material will be provided by contractor.

Recd. Back 100 KVA old T/F from site to ESC Tripula, Raebareli wilth loading unloading.

Installation/Fixing of LT PVC Cable 3.5X240 sq.mm

INCREASING CAPACITY OF T/Fs FROM 100 KVA TO 250 KVA AT VILLAGE PURANI SARENI, BARDAHI SARENI UNDER 33/11 KV SARENI L ALGANJ AT GURBAX GANJ CHAURA, LALGANJ, EMANATING FROM 33/11 KV S/S MALKEY GAON. UNDER EDD LALGANJ.

Carriage of 250 KVA T/F and other related materials from ESC Tripula to work site with loading- unloading and proper stacking at a Place.

Dismantling of old existing 100 KVA T/F, then stacking of dump site with loading unloading,

The work for Earthing, Fensing and excavation of new Plinth size 2.00X2.00X1.50 for making outer wall of Plinth by 1st class brick work in Cement mortar of ratio1:6 of filling earth in Plinth and providing Ston ballast and fixing 02 No.90 Iballs Rail pieces (6.9 Mtr) of proper distance and then plastering the top and all side of plinth wall with cement Corse and sand in ratio 1:4 and then proper spraying of water alongwith All materials & Labour for Mounting of 250 KVA T/Fs on Plinth alongwith fitting of all accessories,under BUSINESS PLAN 2023-24, as per RESPO Norms.

Labour Charges for earthing of 250 KVA 11/0.4 KV Power Transformers completed for digging of 60 fit Borewell type pit (1.5-inch diameter) to install 60 fit long M.S. Pipe (60 fit long) with 1.5-inch diameter work followed by connection of M.S. Stirp 50X6 mm size for Suitable length to G.I. Pipe through proper welding ( Aluminium paint covering of welded joint) with tightening of nuts & bolts and fitting of spaces by homogeneous mixture of coke & sault against medium power transformer body and neutral earthing these includes connection of M.S Strip fot sepret common pit as there will be one pit of each earthing. All rewuired material will be provided by contractor.

Making/Errection/Installation/painting/gouting/welding/febrication/earthig work of Wirmesh Fancing of Jali alongwith Angle isn size of 35X35X5X2500 mm with Nut & Bolts, Washer, Earthing Rod & G.I. wire. Making of 01 No. Gate by M.S. Angle in size of 35X35X5X1000 mm with Nut & Bolts Washer, Earthing Rod & G.I. wire. One No. Gate of M/S Angle in size of 25X5 mm with wiremesh and each of the same. Grouting of M.S. Angle and other required Angles with Grouting materials as per RESPO Norms, under BUSINESS PLAN 2023-24, under EDD Salon, Raebareli. All rewuired material will be provided by contractor.

Recd. Back 100 KVA old T/F from site to ESC Tripula, Raebareli wilth loading unloading.

Installation/Fixing of LT PVC Cable 3.5X240 sq.mm

INSTALLATION OF NEW 250 KVA T/F AT MAURYA NAGAR LALGANJ, EMANATING FROM 33/11 KV S/S LALGANJ TEHSEEL, UNDER EDD LALGANJ.

Carriage of 250 KVA T/F and other related materials from ESC Tripula to work site with loading- unloading and proper stacking at a Place.

Carriage of ST Pole 11 mtr Long from ESC Tripula to work site with Loading- Un-loading and proper stacking at a Place.

Errection & Grouting of ST Pole with grouting materials as per RESPO norms.

Earthing of ST Pole as per RESPO norms.

Cartage of Loose line material including LT ACSR/RABBIT/AB /XLPE CABLE/ weasel Conductor, Earth wire 7/14 SWG, Pin Insulators, Disc Insulatos, Top Channel, Stay Set, Disc Fitting 45/70 KN (T&C), Stay Clamp, 11KV F Clamp, D/P Clamp, V type Cross Arm, Disc Insulators, Stay Wire, SS Base Angle, Earthing Rod, Holding Clamp, T-Off Channel, G.I. Wire 6 SWG, Dropper Channel, Holding Clamp, F Clmp, LT Shackel Insulators, PVC Armed Cable (3.5X70sqmm).I/D & O/D cable Jointing kit., 11 KV TPMO, Copper L-Piece 50x225x10mm, Copper L-Piece 50x225x12mm, & other remaining items. As per required Estimate.

The work for Earthing, Fensing and excavation of new Plinth size 2.00X2.00X1.50 for making outer wall of Plinth by 1st class brick work in Cement mortar of ratio1:6 of filling earth in Plinth and providing Ston ballast and fixing 02 No.90 Iballs Rail pieces (6.9 Mtr) of proper distance and then plastering the top and all side of plinth wall with cement Corse and sand in ratio 1:4 and then proper spraying of water alongwith All materials & Labour for Mounting of 250 KVA T/Fs on Plinth alongwith fitting of all accessories,under BUSINESS PLAN 2023-24, as per RESPO Norms.

Labour Charges for earthing of 250 KVA 11/0.4 KV Power Transformers completed for digging of 60 fit Borewell type pit (1.5-inch diameter) to install 60 fit long M.S. Pipe (60 fit long) with 1.5-inch diameter work followed by connection of M.S. Stirp 50X6 mm size for Suitable length to G.I. Pipe through proper welding ( Aluminium paint covering of welded joint) with tightening of nuts & bolts and fitting of spaces by homogeneous mixture of coke & sault against medium power transformer body and neutral earthing these includes connection of M.S Strip fot sepret common pit as there will be one pit of each earthing. All rewuired material will be provided by contractor.

Making/Errection/Installation/painting/gouting/welding/febrication/earthig work of Wirmesh Fancing of Jali alongwith Angle isn size of 35X35X5X2500 mm with Nut & Bolts, Washer, Earthing Rod & G.I. wire. Making of 01 No. Gate by M.S. Angle in size of 35X35X5X1000 mm with Nut & Bolts Washer, Earthing Rod & G.I. wire. One No. Gate of M/S Angle in size of 25X5 mm with wiremesh and each of the same. Grouting of M.S. Angle and other required Angles with Grouting materials as per RESPO Norms, under BUSINESS PLAN 2023-24, under EDD Salon, Raebareli. All rewuired material will be provided by contractor.

Digging of Pits, fixing nozzling & grouting of Stay Rod inclucing fitting of all accessories with grouting materials as per RESSPO Norms

Fabrication of Line materials like "V" type X-arm/Top Channel/T off Channel/M.S. Channel/ M.S. Angle/Gaurding Angle and other misc work, as required,

Making/Fixing/Installation of Dropper Channel

Making/Fixing/Installation of Top Channel

Making/Fixing/Installation of "T" Off Channel

Making/Fixing/Installation of LT PVC AL. CABLE (3.5X400sqmm.

Making/Fixing/Installation of 4 Core LT MCB with Boix (LS)

Making/Fixing/Installation of Holding Clamp for Top Channel TPMO & Fuse Set etc. With Nuts & Bolt, Material Provided by Contractor

Making/Fixing of Copper L-Piece 50X225X10 mm, Material Provided by Contractor

Making/Fixing of Copper L-Piece 62X225X12 mm, Material Provided by Contractor

Making/Fixing/Tightening of LT. Clamp with Nuts & Bolt for PCC Pole, Material Provided by Contractor

Recd. Back 25 KVA old singel Fase T/F from site to ESC Tripula, Raebareli wilth loading unloading.

Work for Installation/fixing of TPMO Set.

INSTALLATIONJ OF NEW 400 KVA T/F AT MOHALLA CHIKWAHI MONDI EMANATING FROM 33/11 KV S/S LALGNJ TEHSEEL, UNDER EDD LALGANJ.

Carriage of 400 KVA T/F and other related materials from ESC Tripula to work site with loading- unloading and proper stacking at a Place.

Carriage of ST Pole 11 mtr Long from ESC Tripula to work site with Loading- Un-loading and proper stacking at a Place.

Errection & Grouting of ST Pole with grouting materials as per RESPO norms.

Earthing of ST Pole as per RESPO norms.

Cartage of Loose line material including LT ACSR/RABBIT/AB /XLPE CABLE/ weasel Conductor, Earth wire 7/14 SWG, Pin Insulators, Disc Insulatos, Top Channel, Stay Set, Disc Fitting 45/70 KN (T&C), Stay Clamp, 11KV F Clamp, D/P Clamp, V type Cross Arm, Disc Insulators, Stay Wire, SS Base Angle, Earthing Rod, Holding Clamp, T-Off Channel, G.I. Wire 6 SWG, Dropper Channel, Holding Clamp, F Clmp, LT Shackel Insulators, PVC Armed Cable (3.5X70sqmm).I/D & O/D cable Jointing kit., 11 KV TPMO, Copper L-Piece 50x225x10mm, Copper L-Piece 50x225x12mm, & other remaining items. As per required Estimate.

The work for Earthing, Fensing and excavation of new Plinth size 2.00X2.00X1.50 for making outer wall of Plinth by 1st class brick work in Cement mortar of ratio1:6 of filling earth in Plinth and providing Ston ballast and fixing 02 No.90 Iballs Rail pieces (6.9 Mtr) of proper distance and then plastering the top and all side of plinth wall with cement Corse and sand in ratio 1:4 and then proper spraying of water alongwith All materials & Labour for Mounting of 250 KVA T/Fs on Plinth alongwith fitting of all accessories,under BUSINESS PLAN 2023-24, as per RESPO Norms.

Labour Charges for earthing of 250 KVA 11/0.4 KV Power Transformers completed for digging of 60 fit Borewell type pit (1.5-inch diameter) to install 60 fit long M.S. Pipe (60 fit long) with 1.5-inch diameter work followed by connection of M.S. Stirp 50X6 mm size for Suitable length to G.I. Pipe through proper welding ( Aluminium paint covering of welded joint) with tightening of nuts & bolts and fitting of spaces by homogeneous mixture of coke & sault against medium power transformer body and neutral earthing these includes connection of M.S Strip fot sepret common pit as there will be one pit of each earthing. All rewuired material will be provided by contractor.

Making/Errection/Installation/painting/gouting/welding/febrication/earthig work of Wirmesh Fancing of Jali alongwith Angle isn size of 35X35X5X2500 mm with Nut & Bolts, Washer, Earthing Rod & G.I. wire. Making of 01 No. Gate by M.S. Angle in size of 35X35X5X1000 mm with Nut & Bolts Washer, Earthing Rod & G.I. wire. One No. Gate of M/S Angle in size of 25X5 mm with wiremesh and each of the same. Grouting of M.S. Angle and other required Angles with Grouting materials as per RESPO Norms, under BUSINESS PLAN 2023-24, under EDD Salon, Raebareli. All rewuired material will be provided by contractor.

Digging of Pits, fixing nozzling & grouting of Stay Rod inclucing fitting of all accessories with grouting materials as per RESSPO Norms

Making/Fixing/Installation of Dropper Channel

Making/Fixing/Installation of Top Channel

Making/Fixing/Installation of "T" Off Channel With Nuts & Bolt

Making/Fixing/Installation of 4 Core LT MCB with Boix (LS)

Making/Fixing/Installation of Holding Clamp for Top Channel TPMO & Fuse Set etc. With Nuts & Bolt, Material Provided by Contractor

Making/Fixing of Copper L-Piece 50X225X10 mm, Material Provided by Contractor

Making/Fixing of Copper L-Piece 62X225X12 mm, Material Provided by Contractor

Making/Grouting of Stone Pad 300X300X75mm, Material Provided by Contractor

Making/Fixing/Installation of 11 KV Disc Insulator T&C Type 4500 Kg., Material Provided by Contractor

Work for Installation/fixing of TPMO Set.

CONSTRUCTION OF PARTIAL 33 KV KHEERO LINE WHICH UUNDER GROUND CABLE HAS BEEBN DAMAGED PASSING UNDER STATE HIGHWAY UNDER EDD LALGANJ

Carriage of ST Pole 11 mtr Long from ESC Tripula to work site with Loading- Un-loading and proper stacking at a Place.

Cartage of Loose line material including LT ABC/ ACSR/ RABBIT/ /DOG/ CONDUCTOR/ XLPE CABLE/ weasel Conductor, Earth wire 7/14 SWG, Pin Insulators, Disc Insulatos, Top Channel, Stay Set, Disc Fitting 45/70 KN (T&C), Stay Clamp, 11KV F Clamp, D/P Clamp, V type Cross Arm, Disc Insulators, Stay Wire, SS Base Angle, Earthing Rod, Holding Clamp, T-Off Channel, G.I. Wire 6 SWG, Dropper Channel, Holding Clamp, F Clmp, LT Shackel Insulators, PVC Armed Cable (3.5X70sqmm).I/D & O/D cable Jointing kit., 11 KV TPMO, Copper L-Piece 50x225x10mm, Copper L-Piece 50x225x12mm, & other remaining items. As per required Estimate.

Errection & Grouting of ST Pole with grouting materials as per RESPO norms.

Earthing of ST Pole as per RESPO norms.

Digging of Pits, fixing nozzling & grouting of Stay Rod inclucing fitting of all accessories with grouting materials as per RESSPO Norms

Laying of 33 KV (3 x 300) sq. mm double circuit XLPE Cable in G.I. pipe 6" dia by horizontal deep with drilling method including providing bricks, sand, stone slab the inter exel spacing bettween to cable shoulde be in beettween 0.25 m to 0.40 m as required at site as per RESPO Norms.

Laying , stringing & sagging of 33 KV Line by ACSR DOG / RABBITconductor including all associated work & making clearance of Road with Joint/jumpers & binding on insulators as required.

Installation/Fixing of Cable Box O/D 33 KV 3X300 XLPE Cable

Installation/Fixing of 33 KV D.P. Clsmp for ST Pole with Nuts & Bolt.

Making/Fixing/Installation of Top Channel 33 KV Line Top Clamp with N&B

Making/Fixing/Installation of "T" Off Channel (100x50x50x6 mm) for 33 KV With Nuts & Bolt

Work for Installation/fixing of G.I. Wire 6 SWG

Work for Installation/fixing of G.I. Wire 6 SWG & 10 SWG for Gaurding

Work for Making/ Installation / fixing of G.I.Pipe 6" Dia, use for Underground CableMaterial Proided by Contractor.

Work for Making/ Installation / fixing of 33 KV "F" Bracket for ST Pole Material Proided by Contractor.

Work for Making/ Installation / fixing of 33 KV Bracing Clamp with Nuts & Bolt, Material Proided by Contractor.

Work for Installation/fixing of PG Clsmp for DOG to DOG Conductor.

NATIONAL ENTERPRISES

M/S Shiv Traders