PROVN OF UPVC DOOR/ PARTITION NEAR OFFICER WARD, PROVN OF COVERED PATH WAY FROM DEFI WARD TO MRI SCAN, REPLACEMENT OF WINDOW WITH GRILLS FOR SAFETY/ SECURITY PURPOSE OF ONCO III WARD OF BLDG P-100, PROVN OF ACS IN DIFFERENT WARDS AND DEPTS. AT AHR

Amount

Providing and fixing factory made UPVC door/window frame of overall size as per site requirement, made from extruded UPVC profiles for outer frame size 60 mm × 55 mm ± 2 mm, wall thickness not less than 2.0 mm (± 0.2 mm), multi-chambered section reinforced with galvanized mild steel tube of minimum 1.0 mm thickness inside the profile for strength and rigidity, mitred and fusion welded at corners all as specified and directed.

Providing and fixing factory made upvc white colour Door shutter profile to be of size 60 mm × 50 mm ± 2 mm, wall thickness not less than 2.0 mm (± 0.2 mm), reinforced with galvanized mild steel tube of minimum 1.0 mm thickness. Shutter to be fitted with UPVC panels of 20 mm ± 1 mm thickness (solid type) or 5 mm clear/tinted/obscured glass for glazed portion, fixed with UPVC beadings.Frame and shutter assembly to include stainless steel hinges (minimum 3 nos. per shutter), UPVC-compatible handle set, multipoint locking system or approved mortice lock, and EPDM/TPE weather gaskets for all contact edge all as specified and directed.

Supply only 5mm thick sheet glass best quality and glazing with necessary beading/casement and rubber beading used for partition with necessary silicon sealent if required all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in hard dence soil

Excavating in post holes (or similar holes) each n exc 0.5 cu. m getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in hard/dense soil.

M&L for cement concrete 1:2:4 type B2 (40mm graded aggregate) as in foundations filling and mass concrete for including pilasters buttresses columns pillars boundary pillars and posts (including caps and bases) all as specified and directed.

Supply fixing fabrication and erection for mild steel steel work in tubular/square trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 all as specified and directed.

S&F Plates (plain or chequered) Fe-410-W(Gde E-250) quality B channels square cut or notched (ordinary and counter sunk) forming holes without any attachment

Returning filling in including spreading levelling watering and well ramming in layers not exec 25 cm

Removing excavated material exc 250 m but n exc 500 m and depositing where directed

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description not otherwise described over 10cm width or girth

Demolition of cement concrete of any description and in any position not otherwise specifically provided for

M&L 100mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) complete all as specified and directed

M&L 25mm thick cement concrete type B-1 1:2:4 (20mm graded aggregate) as sub-base to flooring

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and 15mm thick screed bed in CM 1:6 complete all as spd and directed

S&F for pre-painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Iroof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F pre-painted galvaume aluminium zink coating Gl based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof

M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6 complete all as specified & directed.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area not exc 1.50 Sqm complete all as specified and directed

Supplying, fabricating & fixing aluminium powder-coated glazed three track sliding window of frame 82mm x 31.75mm x 1.50mm and sliding shutter of section 40mm x 18mm x 0.91mm thick including 4mm thick sheet glass, ordinary quality exceeding 0.50 Sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all fittings such as aluminium handle of size 100mm and locking arrangement with each moving leaf, complete all as specified & directed.

S&F aluminium grill with powder coating (minimum thickness of powder coating 50 micron), 7.5mm size DG-102, fixed to E/H frames, 1.5mm thick, bar size 6.2mm and 7.5mm thick in required sizes, complete all as specified and directed.

Supply and fix hot and cold split AC 1.5 Ton minimum 3 star BEE rating or next higher inverter type having High Ambient Cooling, Anti Microbial Air Filteration, Eco- Friendly Refrigerant, 100% Copper,PM 2.5 filter complete all as specified and directed by Eng-in-charge Note:flexible drain pipe for waste water deemed to be included in quoted rate Fixing of outdoor unit and indoor ,electrical connection, installation of stablizer at input side is deemed in quoted rate.

Supply and fix voltage stablizer operating voltage 130-300 V single phase 50 HZ complete all as specified and directed by Eng-in-Charge

Supply and fix outdoor unit stand wall mounted or floor mounted as per site requirement along with all fitting complete all as specified and directed by Eng-in-charge Note :Fastner nut/bolts and all necessary fitting deemed in quoted rate

Supply and fix wiring for circuit /submain wiring along with earth wire with the following sizes 2x4.0sqmm+1x2.5 sqmm earth wire of FR is PVC insulated copper conductor single core cable including PVC casing caping complete all as specified and directed by Eng-in-charge

Supply and fix copper pipe with proper Insulation and proper tapping of sizes (1/2"+1/8") or as per 1.5 Ton split AC refrigerant pipe size as per requirement. Note Brazzing ,jointing for extended pipe is demeed in the quoted rate

Supply and fix sheet metal with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and directed by Eng-in-charge

Arihant Enterprises (BID ID -3484944)

M/S MG GROUP (BID ID -3489454)

ACR ENTERPRISES (BID ID -3488125)