Replacement of Roofing Sheets for JCOs Single Accommodation and Dining Hall Modification Works to Common Toilet of DSC along with Allied Works for DSC Platoon located at CTH Area HAL Bangalore Including Electrical Works

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

PAN No.:

Service Tax Registration No

Goods and Service Tax ID No.

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2024 of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs.

Pls Enter Turn over in Rupees for all the 3 years

ESI & PF Nos with proof

Remarks if any

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

DECLARATION II

Pls Accept the Delaration II

Specification

Disposal of surplus earth / moorum / building rubbish / malba / similar unserviceable, dismantled or waste material of partitions, ceiling boards, tiles, frames, etc., by mechanical transport including loading, transporting, unloading in all lifts / loads upt 10 km distance from HAL, etc., completely as per directions of Engineer-in-Charge.

Demolishing cement concrete of Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually / by mechanical means including disposal of material within 50 metres lead, etc., all complete as per direction of Engineer-in-Charge.

Hacking of CC flooring including cleaning for surface, etc., all complete as per direction of Engineer-in-Charge.

Dismantling Asbestors cement sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 meters lead, etc., all complete as per direction of Engineer-in-Charge.

Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead, etc., all complete as per direction of Engineer-in-Charge.

Dismantling of cement asbestos ot other hard board ceiling or partition walls including stcakign of serviceble materials and disposal of unservicebel materials within 50m lead, etc., all complete as per direction of Engineer-in-Charge.

Dismantling of wood work in frames, trusses, purlins and rafters up to 10 meters span and 5 meters height including stacking of materials within 50m lead of sectional area 40Sq Cm and above, etc., all complete as per direction of Engineer-in-Charge.

Demolishing brick work manually / by mechanical built in cement mortar means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, etc., all complete as per direction of Engineer-in-Charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead, etc., all complete as per direction of Engineer-in-Charge.

Taking out existing wooden door shutter, repair by cutting, painting, etc., and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc., as required, etc., all complete as per direction of Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains, pipes, cables, etc., in all kinds of soils (not exceeding 1.50m in width or 10Sq m on plan), including dressing of sides and ramming of bottoms, for all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as per direction of Engineer-in-Charge.

Returning / filling available excavated earth (excluding rock) in trenches, plinths, sides of foundation, etc., in layers not eceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead up to 50m and for lift, etc., all complete as directed by the Engineer-in-Charge.

Providing and laying cement concrete in retaining walls return walls, walls [any thickness] including attached pilasters, columns, piers, abutments, pillar, posts, struts, buttresses string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, snken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing, (1:2:4) (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate, etc., all complete as per direction of Engineer-in-Charge.

Brick work with 230mm thick common burnt clay machine moulded modular bricks of class designation 7.5 in brick work above plinth level including making horizontal and vertical grooves 10mm wide 12mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand), etc., all complete as per direction of Engineer-in-Charge.

Half brick masonary with common burnt caly F.P.S ( Non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:3 [1 cement: 3 coarse sand], etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing Granite stone slab of with (18mm to 25mm thick), area of slab not less than 0.50Sq m, like Ruby Red / Black / Cherry with gang saw cut, mirror polished, premoulded and prepolished, machine cut for urinal partitions, platforms, vanity counters, and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish at all levels, etc., all complete as per direction of Engineer-in-Charge.

Supplying, fabricating and fixing of structural steel work riveted, bolted or welded in built up section, trusses and frames work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing of 1st quality Ceramic glazed wall tiles (Light / dark shade) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30Kg per Sq m, including pointing in white cement mixed with pigment of matching shade of any size as approved, etc., all complete as per direction of Engineer-in-Charge.

Providing and laying Vitrified tiles of double charged vitrified polished finish in floor in different sizes (thickness to be specified by the manufacturer) of size [600 x 600]mm with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.30Kgs/Sq m including grouting the joints with white cement and matching pigments, etc., The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily, etc., all complete as per direction of Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth, etc., all complete as per direction of Engineer-in-Charge.

Wall painting with 2 coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams / litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour, etc., all complete as per direction of Engineer-in-Charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade over the existing steel, concrete, wooden surface using one or more coats on old work including necessary preparation, etc., all complete as per direction of Engineer-in-Charge.

Providing [40 x 5]mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block [30 x 10 x 15]cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size), etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing tiled false ceiling of specified materials of size [595 x 595]mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size [24 x 38]mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size [24 x 25]mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of [1200 x 600]mm and secondary cross "T" of length 600mm and size [24 x 25]mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the [1200 x 600]mm panel to form grids of [600 x 600]mm and wall angle of size [24 x 24 x 0.30]mm and laying false ceiling tiles of approved texture in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors, etc., Main "T" runners to be suspended from ceiling using GI slotted cleats of size [27 x 37 x 25 x 1.60]mm fixed to ceiling with 12.50mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size [85 x 30 x 0.80]mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, etc., all complete for all heights as per specifications, drawings and as directed by Engineer-in-Charge.

Providing and fixing factory made uPVC door frame made of uPVC extruded sections [42 X 50]mm having an overall dimension as below (tolerance±1mm), with wall thickness 2.0mm (± 0.20mm), corners of the doorframe to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the framesreinforced by galvanized M.S. tube of size [19 X 19]mm and 1mm (± 0.10mm) wall thickness and 3 Nos stainless steel hinges fixed to the frame complete as per manufacturer’s specification, etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing to existing door frames 24mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size [59 x 24]mm and wall thickness 2mm (± 0.20mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised / plastic brackets of size [75 x 220]mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size [20 x 20]mm and 1mm (± 0.10mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size [100 x 24]mm and 2mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic / galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620mm, having over all thickness of 20mm and 1mm (± 0.10mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6mm galvanised M.S. rod and fastened with nuts and washers, etc., complete as per manufacturer's specification and direction of Engineer-in-Charge.

Providing and fixing Hard wood (SAL) for frames of doors, windows, hand rails, frame work for partitions, cut to shape and required curvature and preparing the surfaces to receive the polishing fixed in position with hold fast lugs / with dash fasteners of required dia & length / SS Screws at all heights, with necessary moisture content test, etc., complete as per direction of Engineer-in-Charge. (Fastners / hold fasts / SS Screws to be paid separately)

Providing and fixing 35mm thick flush door shutters conforming to IS :2202 (Part I) non-decorative type of approved brand / make, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched commercial 3 ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters and making rectangular vision panel of 0.10Sq m with 6mm thick clear heat strengthened glass, etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing bright finished brass handles of 125mm size with screws, etc., complete.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc., complete.

Providing and fixing bright finished brass tower bolts of [250 x 10]mm (barrel type) with necessary screws, etc., complete.

Providing and fixing bright finished brass 100mm mortice latch and lock with minimum 6l evers and a pair of lever handles of approved quality with necessary screws, etc., complete.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kgs and door width upto 700mm), with necessary accessories and screws, etc., complete.

Providing and fixing aluminium sliding door bolts(aldrop) of [250 x 16]mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc.,

Providing and fixing 20mm dia chromium plated brass curtain rod / Towel rail of 600mm long having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves, etc., wherever necessary.

Providing and fixing aluminium handles of 125mm size, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws, etc., complete as per the instruction of Engineer-in-Charge.

Providing and fixing 5mm thick glass panes for doors, windows and clerestory window,ventilators (weight not less than 12.50Kgs/Sq m), including cutting an dfinishing as per site requirement, etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing aluminium tower bolts of size [250 X 10]mm, ISI marked, anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws, etc., all complete as per direction of Engineer-in-Charge.

Providing and laying Glazed vitrified floor tiles Matt / Antiskid finish of Size [600 X 600]mm as indicated below for Paper Joint in different sizes (Thickness to be sepcified by the manufacturer) with water absorption less than 0.08% and confirming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 course sand), including grouting the joints with grey cement slurry @ 3.30Kg/Sq m including grouting the joints with white cement and matching pigments, etc., all, complete as per instructions of Engineer-in-Charge.

Providing and fixing Single socketed pipes of 110mm diameter unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A of approved brand, on wall face including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., complete as per direction of Engineer-in-Charge.

Providing and fixing Single socketed pipes of 75mm diameter unplasticised Rigid PVC water pipes conforming to IS : 13592 Type A of approved brand, on wall face including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, etc., complete as per direction of Engineer-in-Charge.

Plastering to internal brick / block wall with 15mm thick on the rough side of single or half brick wall of cemnet mortor (1:6) including leveling, curing and making the level smooth and at all heights, , etc., complete as per direction of Engineer-in-Charge.

Providing of plaster drip course / groove in plastered surface or moulding to R.C.C. projections and execute the work, etc., complete as per direction of Engineer-in-Charge.

Plastering to ceiling with 12mm thick on the rough side with cement mortor (1:4) including leveling,curing and making the level smooth and at all heights and execute the work, etc., complete as per direction of Engineer-in-Charge.

Plastering to external brick/block wall with 18mm cement plaster in two coats under layer 12mm thick cement plaster on the rough side with cement mortor 1:5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement : 6 fine sand), etc., complete as per direction of Engineer-in-Charge.

Providing and Finishing walls with Acrylic Smooth exterior paint for new / old walls of required shade for New work (Two or more coat applied @ 1.67 ltr/10 Sq m over and including priming coat of exterior primer applied @ 2.20 kg/10 Sq m) including scrapping, preparationof surface for completing the work, etc., complete as per direction of Engineer-in-Charge.

Dismantling 15 to 40mm dia G.I. / CPVC pipe including stacking of dismantled pipes (within 50 metres lead) including making temporary arrangements for continuing ongoing services to toilets, etc., complete as per direction of Engineer-in-Charge.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba, making temporaray arrangements for blocking service lines to avoid water leakages, etc., complete as per direction of Engineer-in-Charge.

Disconnecting damaged overhead / terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level, etc., complete as per direction of Engineer-in-Charge.

Providing & fixing White vitreous china Orissa pattern water closet squatting pan of approximate size [580 x 440]mm or nearest available size along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, etc., all complete as per the direction of Engineer-in-Charge.

Dismantling / removing tile work (for thickness of tiles 10mm to 25mm) of in floors and in walls laid in cement mortar after disconnecting the electrical service and AC lines if any, including stacking material and disposal of dismantled materials up to a lead of 50m, etc., all complete as per direction of Engineer-in-Charge.

Providing and fixing beveled edge mirror of size [600 x 450]mm of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, etc., complete as per direction of Engineer-in-Charge.

Providing and fixing half pedestal Vitreous China Wash basin size of approximate size [630 x 450]mm fixed with with C.I. brackets / rack bolts, single 15mm C.P. brass pillar taps, 32mm C.P. brass waste coupling of standard pattern, including PVC waste pipe of with waste fittings of 40mm dia and make it function of approved brand / make, including painting of fittings and brackets, cutting and making good the walls wherever required, etc., complete as per direction of Engineer-in-Charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of approved brand with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all connecting fittings and fixtures to make it operational completely, including cutting and making good to the walls and floors wherever required, etc., complete as per direction of Engineer-in-Charge.

Providing and fixing 8mm dia C.P. / S.S. Jet (Health Faucet) with flexible tube upto 1 metre long with S.S. triangular plate on walls / Eureopean type W.C. material of approved make and quality, etc., complete as per direction of Engineer-in-Charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of [430 x 260 x 350]mm and [340 x 410 x 265]mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, etc., complete as per direction of Engineer-in-Charge.

Providing, fixing, testing and commissioning trap (floor trap) of approved make with 100mm inlet and 75mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors, connection with PVC soil / waste pipe, necessary 150mm thick cement concrete (1:2:4) for embedding the trap, etc., all complete as directed by the Engineer-in-Charge.

Constructing masonry Chamber [60 x 60 x 75]cm inside or outside (or approx. size as per site condition), in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ), i.e necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5, etc., complete as per direction of Engineer-in-Charge.

Providing and fixing 15mm nominal bore dia C.P. brass bib cock of approved quality conforming to IS:8931, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes of approved brand, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00m spacing, necessary reducers, unions, collars, bends, tank adaptors, etc., This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls, etc., complete as per direction of Engineer-in-Charge.

15mm dia

20mm dia

25mm dia

32mm dia

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms (or nearest availabe size and weight), etc., complete as per direction of Engineer-in-Charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of 1000 Litres capacilty, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes, etc., complete as per direction of Engineer-in-Charge.

Providing and fixing C.P. brass long/pillar body bib cock of 15mm nominal bore, approved quality conforming to IS standards and weighing not less than 690 gms, etc., complete as per direction of Engineer-in-Charge.

Supply and Making connection of drain pipes of 100 to 250mm diamete or sewer line with existing manhole including breaking / cutting into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with C.M 1:3 ( 1 cement : 3 caorse sand ), finished with a floating coat of neat cement and making necessary channels for the drain, etc., all complete as directed by the Engineer-in-Charge.

Dismantling of old S.W. pipes of 100mm diameter including breaking of joints and bed concrete stacking of useful materials near the site within 50m lead and disposal of unserviceable materials into municipal dumps and making temporary arrangements to protect / countinue ongoing service lines of other floors, etc., complete as per direction of Engineer-in-Charge.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per Sq m as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-Charge. The sheet shall be fixed using self drilling / self tapping screws of size [5.50 x 55]mm with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, etc., complete as per direction of Engineer-in-Charge.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm (+0.05 %) total coated thickness, Zinc coating 120 grams per Sq m as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws complete : Ridges plain (500 - 600mm), , etc., complete as per direction of Engineer-in-Charge.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm (+0.05 %) total coated thickness, Zinc coating 120 grams per Sq m as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws complete: Gutter (600mm over all girth), etc., complete as per direction of Engineer-in-Charge.

Rupees Thirty Nine Lakh Eighty Nine Thousand Seven Hundred Thirty Five and Thirty Seven Paise Only

Light Fittings

Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Box type 1X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum100 lm/W., comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire. Other standard accessories including necessary inter-connections and supply of 1 No of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-chage. Make & model: The LED tube & batten shall be of CROMPTON-IGP161LT8-16.1XT8+LT8-20-865/ Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge.

Supply and fixing on existing wall / ceiling, testing & commissioning of surface mounting, Box type 2X18W/20W T8 LED Tube light (four feet) Luminaries with minimum lumens output Efficacy of minimum100 lm/W., comprising of white powder coated CRCA sheet steel housing, operating on single phase 230V 50Hz AC supply, built-in electronic driver, LM 79 certification for luminaire. Other standard accessories including necessary inter-connections and supply of 2 Nos of 18/20W T8 LED Tube, complete in all respects and as directed by engineer-in-chage. Make & model: The LED tube & batten shall be of CROMPTON-IGP161LT8-16.2XT8+LT8-20-865-(2) /Equivalent model of approved make luminaries which meets the above technical specification. complete in all respect and as directed by Engineer-in-charge.

Supply & fixing on the building at a height of 4-5mtr approx. including supply and fixing GI pipe bracket made out of 40mm dia class B GI pipe of 1.5Mtrs long bent to shape with necessary fixing hardwares etc., to fix on building and testing & commissioning of building light LED light fixture of wattage not exceeding 70 watts and lumens output not less than 8400 lumens with necessary interconnections consisting of pressure die cast aluminum housing, optical cover made out of heat resistance toughened clear glass with IP66, luminous efficiency ≥120 lm/w at luminaries level, operating on single phase 230V 50Hz AC supply, efficient heat sink, colour temperature shall be 5700K, suitable optics for maximizing the spread complete in all respects and as directed by engineer-in-change. The luminaries shall have specific lens for optical dispersion including control gear and power factor of control gear shall be >0.95. LM 79 certification for luminaries & LM80 certificate for LED shall be produced. Any approved make fitting meeting the above technical specification has to be supplied.The LED Light fixture shall be of Bajaj :BAJAJ NEXO 84L WH PO PC SD /Equivalent model of approved make luminaries which meets the above technical specification complete in all respect and as directed by Engineer-in-charge. LED used in the fixtures shall be of approved make as per List of approved makes in tender document.

Supply, fixing on wall using suitable MS angle frame work, testing & commissioning of LED flood/focus lighting fixture of wattage not exceeding 150watts, lumen output not less than 18000lumens, lumens efficacy ≥ 120lm/w, made out of die cast aluminum housing, optical cover made out of heat resistance toughened clear glass / polycarbonate, including control gear and mounting arrangment. The The Colour temprature of the fitting shall be >5600K operating on single phase 230V voltage 50 Hz AC supply with voltage range 140-270V with power factor of driver unit>0.9. LM79 certification for luminares & LM80 certificate for LED shall be produced. including MS angle & necessary hardwares required has to be supplied with the fitting and other standard accessories complete in all respects and as directed by Engineer incharge. Make/model: Bajaj cat no:GLATT MT 180L WH PO PC SD or equivalent model meeting the above parameter of approved make LED lighting fixtures.

Supply and fixing on MS perlins/wall using suitable angle iron frame work, fixing hardware, Cable junction boxes IP 65/66 with integrated membranes for cable entry of Hensel make (not less then 104x104x70mm) or equivalent model in Legrand/ Hager/ Schneider with cover and providing 10A 6way PVC connector inside the box as directed by Engineer -in-charge.(For Building LIGHT fittings)

Supply, installation, testing & commissioning of 300mm dia 900 rpm heavy duty exhaust fan of any approved make with louvers, connecting cord with 6A, 3 pin plug top and with all necessary accessories, including making wall openings and replastering to smooth finish with matching paint etc., complete in all respects and as directed by Engineer-in-charge.

Wiring for light point / fan point / exhaust fan point/call bell point from nearest switch box with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, fan regulator, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (as per detailed CPWD specifications for Group B wiring)

Wiring to single light point controlled by 1 No 6A, 250V gr. flush type modular SP switch complete in all respects.

Wiring to fan point controlled by 1 No. 6A, 250V gr. flush type modular SP switch including providing 1No box type MS Fan hook in ceiling wherever required, 2 module type electronic five stepped speed regulator etc., complete in all respects.

Wiring for circuit / submain wiring along with earth wire with 2 x 4 sq. mm + 1 x 4 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

6A Switch

16A Switch

3 pin 6A Socket outlet

5 pin 16A Socket outlet

Supplying and fixing of 3 Modular (100mm X 75mm) size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. As required,

Wiring for circuit/ submain wiring alongwith earth wire with 2 X 2.5 sq. mm + 1 X 2.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB/MCCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of 200 amps tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:

12 way, SPN Double door DB

6 way (4+18) Double door VTPN MCB DB

40A, 415V, gr. TPN MCB "C" curve, 10 KA breaking capacity.

63A, 415V, gr. TPN MCB "C" curve, 10 KA breaking capacity.

40 amps. ratings, TP MCB, "C" curve, 10 KA breaking capacity.

6-32 amps. ratings, TPN MCB, "C" curve, 10 KA breaking capacity.

6-32 amps. ratings, TP MCB, "C" curve, 10 KA breaking capacity.

6-32 amps. ratings, SP MCB, "C" curve, 10 KA breaking capacity.

Starters and Switches

Supply, fixing on wall using suitable angle iron frame work, testing and commissioning of the 125A, 415V Gr,TP+NL powder coated, Switch disconnector fuse unit with equal rating DIN type HRC fuses, front operating handle, ON and OFF indication using LED module etc. enclosed in sheet steel enclosure, including suitable cable end box(incoming/outgoing) wherever necessary complete in all respects and as directed by Engineer-in-charge.

Supply, fixing, testing and commissioning of Direct-on-Line Starters in Sheet-Steel Enclosure Type (Motor Rating AC-3 Duty, 415V, 50Hz, 3-Ph) starter suitable for 5 HP motor or as required for pump motor. The starter shall be with sufficient auxiliary contacts for remote ON/OFF i, suitable rating bi-metallic thermal overload relay , ON/OFF push buttons suitably wired and interconnected with 2.5 Sq.mm single stranded PVC copper wires, etc. complete in all respects as directed by Engineer-in-charge.

LT Cables

4 CX 16 Sqmm Aluminium armoured conductor.

4 CX 6 Sqmm Aluminium armoured conductor.

LT Cable End terminations

4C X 16 Sqmm Aluminium armoured conductor

4C X 6 Sqmm Aluminium armoured conductor

Earthing

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required complete in all respect as directed by EIC and as per technical specification.

Supplying & laying 25 mm X 5 mm GI strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and fixing of Hot dip galvanised Perforated type cable tray of 200 x 50 x 2mm thick With Cover sizes, steel: As per IS:2062 / 1079, Galvanising : As per IS: 2629 / 4759 including all accessories like base slotted angle , horizontal elbow, horizontal tee, horizontal cross, horizontal reducer, vertical elbow up, inside, vertical elbow down, outside, coupler plate, fasteners etc., and duly suspended from the ceiling/fixing to the wall/RCC beam/iron structures upto a height of 3/4mtrs from FFL., complete in all respects and as directed by Engineer in charge

Dismantling & Removal of following items

Rupees Four Lakh Two Thousand Two Hundred Ninety Five and Sixteen Paise Only

Rupees Forty Three Lakh Ninety Two Thousand Thirty and Fifty Three Paise Only

Approximate Amount Put to Tender

Rupees Seven Lakh Ninety Thousand Five Hundred Sixty Five and Forty Nine Paise Only

Rupees Fifty One Lakh Eighty Two Thousand Five Hundred Ninety Six and Three Paise Only