Construction of 165 meter (541 Feet) Deep Tubewell Boring at shakti Bhawan Extension Building Lucknow

Amount

Developing the tubewell by the air compressor having a capacity of 8.5 CuM or by the borehole pumping set having the capacity of 0.7 CuM/sec as per direction of Engineer I/C.charges etc complete.

Drilling bore from G.L. to 180 M B.G.L., work to be completed as per direction of Engineer I/C . As per 19.4 above but for 450 mm dia. boring.

from 0 M BGL to 90 M BGL.

from 90 M BGL to 120 M BGL.

from 120 M BGL to 150 M BGL.

from 150 M BGL to 180 M BGL.

Lowering of tube well assembly alongwith shrouding with pea gravels, testing, verticality of Tube well and washing of the tube well from G.L. to 180 Meter B.G.L. the cost including all labour, materials, T&P required for proper completion of work but excluding the cost of slotted pipe/ plain M.S/PVC.pipe assembly and Pea gravel.

from GL to 90 M BGL.

from 90 M BGL to 120 M BGL.

from 120 M BGL to 150 M BGL

from 150 M BGL to 180 M BGL

Providing Plain MS pipe for making tubewell assembly and cartage to boring site, the pipes shall be of TATA / SAIL / Jindal or other ISI marked approved make, including cost of all labour, materials and T&P required for assembly making and proper completion of work.

200 mm dia M.S.plain pipe 6mm thick

As in item 19.06 but Slotted MS pipe.

200 mm dia M.S.Slotted pipe.

Development of tubewell by O.P. Unit , including bringing Column pipe for the OP unit, assembling, electric connections, running for required period, dismentling and taking out & carrying away and cleaning the site with cost of all labour, materials, T&P and fuel / Electricity Charges etc required for proper completion of work and as per direction of Engineer-in-charge.

Supply and fixing of M.S. bail plug of heavy quality including all labour material & T&P.

200 mm dia.

Supply and fixing of MS top plug of heavy quality including all labour material & T&P.

200 mm dia.

Supply and fixing of 1.20m long holding support clamps for 300 to 100mm dia tube well pipes. made out of MS flats, pairs of bolt-nuts etc complete with all material, labour, T&P.

Supply and fixing of G.I. ("B" class ) column pipes JTC/ JINDAL make with column coupling socket as required for proper completion of work including all labour material & T&P.

65 mm dia.

Supply and fixing C.I. non-return valve ISI marked and approved make with nuts, bolts, packing etc complete including all labour material & T&P.

65 mm dia.

Supply and fixing support clamps for column pipes made out of MS flats, pairs of bolt-nuts etc complete with all material, labour, T&P.

65 mm dia.

Supply and stacking pee gravel properly at levelled ground for measurement as directed by Engineer I/C, including all labour, T&P required for proper completion of work.

Transportation and installation of tube well drilling Rig m/c, compressure for development and other required equipments and accessories at site of work and dismentlling & taking them back after successful completion of the work including cleaning, levelling - dressing the site properly, also disposing off the surplus earth, silt, sand etc.

Supply & installation of electrical control panel of L&T / Havells or equivalent make for submersible pump / pumpset containing contractor relay condenser.

for 15 H.P pump set three phase

Supply & Installation of submersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. (CSI No. 19.32)

three phase 15 HP outlet 80 mm dia. or more, Head 57/28, Discharge 30000/65000 LPH

Supply and fixing of submersible cable Havels or equivalent make, for submersible pump complete in all respect.

6.0 mm2 for pump above 7.5 HP and up to 15 H.P.

Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work.

Cleaning and dressing of site for tube well boring including cost of all labour, materials and T&P required for proper completion of work.

Arranging Chemical and bacteriological test of water from reputed lab and submission of report to E/I.

Supply and fixing of MS ring of heavy quality including cost of all materials, labour and T&P etc required for proper completion of work.

200 mm dia.

Providing and fixing 65 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. The rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete.

Providing and fixing full way 65 mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

GM Full way Gate Valve 65 mm dia.

Providing & fixing half turn 65 mm dia gate valve, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

HALF TURN GATE VALVE 65 mm dia.

Providing and fixing SLUICE VALVE, CI 80 mm dia. WITH Wheel. ISS:780 & ISS: 2906 class - I, 'MEC' make, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work.

SLUICE VALVE CI 100 mm dia. WITH Wheel. ISS:780 & ISS: 2906 class - I, 'MEC' make, ISI marked

SUMI ENTERPRISES

EAGLE CONSTRUCTION