Construction of Multi-storied building for B4 High Court Police Station and High Court Fire Station (Esplanade) at Madras High Court Campus in Chennai city

Amount

1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 m.

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 m.

7.2)Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1) Filling with Excavated Earth

15.1) Cuddappa slab 20 mm tk.for C/B slab. a. Ground floor

b. In First floor

c. In Second floor

d. In Third floor

e. In Fourth floor

f. In Fifth floor

g. In sixth floor

h. In seventh floor

i. In eighth floor

j. In Ninth floor

15.2) Cuddappa slab 40 mm tk.for C/B slab. a. In Ground floor

b. In First floor

c. In Second floor

d. In Third floor

e. In Fourth floor

f. In Fifth floor

g. In sixth floor

h. In seventh floor

i. In eighth floor

j. In Ninth floor

21.2) Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3) Supplying and fixing of Magnetic door catches

25) M.S.Holdfast

30) Ellispattern

31) Weathering course

37.1) White washing 3 coats (slaked)

39) M.S Grills

40) Painting - New "wood work"

41) Painting - New "iron work"

46) Supplying and fixing of 20 mm dia Alu. Hanger Rod

47) Supplying and fixing of Alu Towel rail 75 cm long

48) Supplying and fixing of 5 pin Coat stand

49) Supplying and fixing of chromium plated 8 guage Picture Hook

50.3) Supply and planting avenue trees

50.4) Providing Tree guard

52.1) G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls)

53.3) C.I. Steps ( 5 kg)

55.2) Supplying and fixing of approved brand Porcelain Flat Back urinal superior variety

Electrical arrangements 72) Box type Fibre Fan hook

74) Charges for fixing of "Fan"

76) 8 SWG wire

78) Earthing Station IS3043 (Type I)

86) Anti termite treatment

112) S & F of Exsaust Fan 300 mm dia

Annexure 1.9.3.1) Bored cast situ piles installation of vertical cast in Situ Bored piles of following dia using Standardised concrete mix M30 Grade. b.450mm dia pile

c. 600mm dia pile

1.9.4) Chipping of RCC pile head of 450mm Dia of pile to the required cut off level and clearing away the debris from site with an average lead of 3 km etc. b.450mm dia pile

c. 600mm dia pile

1.9.5) Mobilization charges inclusive of transportation to site assembling and dismantling the rotary pile equipment employed for the works For piles

1.9.6) Conducting Routine vertical compression load test for bored cast in situ RCC piles of following dia

1.14.2) Prviding Augering 30 cm dia for compound wall (Standardized concrete grade M30)

2.1.1) Filling C.S. sand

2.12) Supplying and filling with gravel

2.15) Supplying and filling stone dust

3.1.3) C.C.1:5:10 for Foundation & Basement

3.2.3) P.C.C. 1:2:4 for Foundation & Basement and other similar works

6.2.2) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")

8.2.3.1) Standardised concrete Mix M30 Grade Concrete a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

e. In Third floor

f.In fourth floor

g. In Fifth Floor

h. In Sixth floor

i. In Seventh Floor

j.in Eighth floor

k.in Ninth floor

l. In Tenth floor

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor/Stilt floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

f. In Fifth floor

g. In sixth floor

h. In seventh floor

i. In eighth floor

j. In Ninth floor

k. In Tenth floor

10.2.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) a. In Foundation and basement

b. In Ground Floor/stilt floor

c. In First Floor

d. In Second Floor

e. In Third Floor

f. In Fourth Floor

f. In Fifth floor

g. In sixth floor

h. In seventh floor

i. In eighth floor

j. In Ninth floor

11.2.2) Brick work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) a. In Ground Floor

b. In First Floor

c. In Second Floor

d. In Third Floor

e. In Fourth Floor

f. In Fifth floor

g. In sixth floor

h. In seventh floor

i. In eighth floor

j. In Ninth floor

18.1) Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

f.Curved surface

18.9) Providing Form work and centering (Double stage) for reinforced cement concrete works having roof height 6m(or) above from floor level

21.5.2.2) Supply and Fixing Soild UPVC door Shutter with frame

21.6.2.2) R.C.C.Door frames of size 100 x 75mm with one edge grooves size 't' x 20 mm using M30grade (with out vibrating charges) a. 900 x 2100 mm

21.7.3) Supplying and fixing of Solid Core Flush door Shutters with teakply on both side with teakwood lipping alround 35mm thick a) 1000x2100mm (single leaf)

b) door size 900 m x 2100 (Single Leaf)

22.1.7) Supplying and fixing of Best Indian Teakwood Panelled door shutters Single leaf with Brass fittings a. 1000X2100mm. ( Single leaf)

22.1.8) Supplying and fixing of Best Indian Teakwood Panelled door shutters Single leaf with Brass fittings a). 1200 x 2100 mm ( Single leaf)

22.3.3) T.W. frame & TW styles & rails with BWR double leaf shutters for cup board/ ward robes including two coat enamel paint & one coat primer.

22.3.4) TW frame & TW styles & rails with 9mm tk BWR double leaf shutter for ward robe / cup board a)a) Men rest room cupboard of size 4.00mx2.10m

23.5) Supply & Fixing of MS door (for lockup door ) MS door of Size 1000 x 2100mm

24.1.1) Supply & Fixing of MS ventilator of size ( lockup) a. V -900mm x 600mm

26.1) Flooring in C.C.1:5:10

28.1) Floor plastering in C.M. 1:4, 20 mm tk.

29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm tk

29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

32.1.1) Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound

33.2.1) Plastering with CM 1:5 12mm thick finishd with neat cement

34.2.1) ) Plastering in C.M. 1:4, 12 mm tk.

35.2.1) Spl. Ceiling plastering in C.M. 1:3, 10 mm tk.

36.1) Cement mortar Border in C.M. 1:5, 12 mm tk. a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

43.2.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.(BINDING WIRE insulated with PVC)

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M30)

b) Augering 30cm dia

44.5.3.1) Providing Rain Water Harvesting well ring circular shape of 90cm dia, 60cm depth,50mm thick using M30 grade concrete

44.6.1) Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992- type 'A' for Rain water down fall pipe UPVC Specials

50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm

50.5.1) Supplying. Fabricating and erection of M.S Scheme Name board

50.6.1) Supplying and fixng of Fibre mixed precast slab of 50mm thick of all required shapes made in cement concrete 1:3:6

52.1.1) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials a. 40mm dia

b.32mm dia

c. 25 mm dia

52.4.1) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials (fully consealed in walls) c. 20mm dia PVC water supply ASTM pipe

52.9) Supply and fixing of 40mm dia MS clamp set

53.4) Supplying & fixing of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5) Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1) Supplying and fixing of of 15mm dia half turn CP long body tap

54.2.1) Supplying and fixing of of 15mm dia half turn CP short body tap

56.3.1) Supplying & fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.

56.4.1) Supplying & fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

57.1.2) Supplying and fixing of of E.W.C.(White) 500 mm with "P" or "S" TRAP with double flapped seat & seat cover

58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.2.1) Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm

60.1) PVC Nahani trap (4way/2way)

61.3) UPVC Non Pressure pipe of SN8 SDR 34 ( S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1) PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

b. 160 mm dia PVC bend

62.2.1) PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal tee

b. 160 mm dia PVC Equal tee

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. ( PVC Box , Fire Retarded Box) a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

64.3.2) Wiring for lift well light point and socket outlet with 2 x 1.5 sqmm FRLS PVC insulated stranded copper conductor of 1100V

65.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.(PVC Electrical Box )

66.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.(PVC Electrical Box )

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(PVC Electrical Box )

69.2) Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box , Fire Retarded Box)

70.5.2) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with fitting

71.2) Supplying and fixing of 32 AMPS Triple pole main switch

75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletcronic Dimmer

77.5) Run of 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

79.8) Supplying and fixing 3 no of 32 Amps 500 volts grade porcelain fuse unit

82.2) Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, copper tube,

82.3) Supply, installation, testing & commissioning of 100mm dia cast iron earth electrode with flange

82.3.1) Supply, fiing of 25W LED street light etc.,

82.4) Supply and fixing of twin arm suitable for 100 W BC lamp / 6 W LED lamp type

Emergency Lighting 82.5) Supply, Installation, Testing and Commissioning of 3 KVA invertor

84.3) Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

85.1) Supply of G.I pipe 40mm dia 'B' Class

Enclosure for the earth bus 85.4) Supply and run of 50 mm dia GI pipe on wall ( B class ) for the drawal of earth bus ( 25 mm x 3 mm ) copper flat

90.2.1) Providing additional Strutting to centering of R.C.C slab and beams of all surfaces or any other form works required at site during execution of work for every additional 1 metre height a) 3.31mt. to 4.3mt

93.1) Plastering with CM 1:3, 12mm with WPC

96.7) Supply and Laying Rubber Moulded Hyraulic Pressed Paver Block 83 mm thick including labour charges for laying etc

98.5.1) TW double leaves shutter with Brass Fittings b. 1500X2100mm.with Brass fittings (Double leaf)

108.6.2) Run off 4 Wires of 6 sqmm PVC insulated single core multi strand

108.7.1) Run of 4 Wires of 10 sqmm PVC insulated single core multi strand

125.3) Supplying and delivery of "Godraj Nav-tal Ultra XL+/equivelant" lock of approved quality

144.2.1) Supplying and fixing of 250 Watts Metal halide Flood light etc.,

144.3.1) Supply and fixing of 80W LED street light luminaire complete on 7.M. octagonal pole including supply and fixing of lamp .

144.4.1)Supply and fixing of 75 W mid bay LED luminaire on the main portico with necessary internal connections.

149.3.1) Supply and erection of hot dip galvanized 7M. Free standing Double Arm bracket 8 sided octogonally continousaly tapered structure pole as per IS-875

149.3.2) Supply and fixing of SMC fuse box ( IP 65 rating) containing 1 No. 32 A 4 way terminal block, 1 No. 10 A,10 KA TPN MCB

151.3.1) Supply and laying of the following size of PVC LTUG aluminium armoured cable (below GL) a) 3.5 core 120 Sq.mm PVC armoured LTUG cable

b) 3.5 core x 25 sq.mm PVC armoured LTUG cable -

c) 4 core x 16 sq.mm PVC armoured LTUG cable

155.1Suplly and erection of 250 Amps Capacity floor mounting panel board (Cubical type)

155.2)Supply and erection of 125 Amps capacity floor mounting panel board (Cubical type)

155.3) Supply and erection of 63 Amps capacity floor mounting panel board (Cubical type) with bus bar chamber

161.1.4) Supplying and fixing of brass cable gland suitable for following core sqmm PVC armoured LTUG cable a) 3.5 core 120 Sq.mm PVC armoured LTUG cable gland

b) 3.5core 25Sq.mm PVC armoured LTUG cable gland

161.4) Supply and providing cable end termination of following PVC LTUG Aluminium armoured cable a) 3.5 core 120 Sq.mm PVC armoured LTUG cable End terminiation

b) 3.5 core 25 Sq.mm PVC armoured LTUG cable End terminiation

162.2.1) Supplying and clamping of PVC armoured LTUG cable(Above GL) a) 3.5 C x 120 sq.mm. PVC LTUG aluminium armoured cable

b) 3.5 x 25 sq.mm PVC armoured LTUG cable

c) 4 c 2.5sqmm. PVC LTUG aluminium armoured cable from alternator to the proposed DG panel on wall

171.2.8) Supply and Delivery of Submersible motor Pumpset with ISI mark IS8034 without Panel Board of capacity 30 LPM X 125m

171.2.9) Supply and Delivery of Three phase Openwell Submersible motor Pumpset 50LPM X 100m

175.3.1) Supply and fixing of triple pole and neutral 6 way 7 segment 3 tier compartmental type MCB distribution board 3 phase with Metal / Acrylic Door Cover with IP42 Protection

178) Earthing as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe

179) Plate earthing with copper plate of size 600 x 600 x 3 mm as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe of dia not less than 40mm

179.1)Supply and run of 25mm x 3mm tinned coated copper flat on surface or in recess for connections as required with necessary MS clamps /support on wall /ground for earth connection

179.2) Providing and fixing 25mm x 6mm copper strip on surface or in recess for connections as required for alternator neutral

180) Supply and run of 2 of No.8 copper wire for earth connections

202.1) Supplying and delivery of GI pipes (Medium) as per IS 1239/part I/2004 for encasing to the road crossings. a. 100mm dia GI (medium) class pipe

207.3.1) Providing two coats of Plastic Emulsion paint including primer for inner walls

207.4.1) Providing two coats of Exterior Emulsion paint including primer for outer walls

213.1) Supplying and fixing of SRFC cover slab a.60cm x 60cm

b. 30cm x 30cm

238) Anticorrosive treatment for steel grills

238.1) Anticorrosive treatment for window grills

255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder a) 9watts LED bulb

b) 12 watts LED bulb

255.6) Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

255.8.3) Supply and fixing of 2' x 2' square type recessed / surface mounted fitting with 36 W LED bulbs and with necessary connection

343.2.2) Supply and fixing of Galvanium sheet 0.47mm thick

344.2) Supplying and fixing of Bevelled edge mirror 500 x 400 x 5.5mm

359.3.1) Concrete designer tiles flooring

361.5.1) Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet

362.2.2) Suppling and laying of Stain Free Nano Polish Vitrified Tiles 600 x 600 x 8mm Flooring in C.M 1:3

366.1.1) Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser 1.60mm thick welded to the railing. The supports will be grouted into the wall

366.3.1) Manufacturing, Supplying and Fixing of Stainless Steel Hand rails from finished floor level

367.1) Providing wooden Melamine polish for new wood work

379.7.1.1) Supplying and fixing of PVC trims (beading) of approved quality

379.8.4.2) Supply and Laying of Granite tile of 10mm thk (wall Cladding ) in C.M 1:2 (Sinthetic Grey, Paradise and similar varieties)

379.8.4.3) Supply and fixing of Granite tiles 10mm thk Ruby red for flooring in CM 1:3, 20mm thk

379.8.5) Supply and Laying of Granite slab Flooring in C.M 1:3 20mm Thick incl. pointing (Sinthetic Grey, Paradise and similar varieties)

379.9.2) Supply and fixing of rubber round column guard of size 550mm height x 75mm (two corners each 75mm ) x 10 mm thick

379.9.4) Supplying and fixing of Convex Mirror 60cm dia with plastic caver )

383.2) Providing double nosing to the edges of Granite slab

451.3.2) Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings a) CP Shower Arm with Overhead shower rose.

b) CP Angle cock tap

c) CP Stop Cock 15mm dia

451.3.3) Supplying and fixing of best approved quality of following Stainless steel water supply/Sanitary fittings a) Stainless steel Health faucet

452.1) Automatic Electrical Water Heater with copper container, with Glass Wool / Puf Insulation with MS powder coated shell suitable for 25 Litres capacity 230V / 1000W Higher End)

453.2) Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification.

503.1) Supply and laying of required dia of Nylon rope

504.4) Supplying, laying, fixing and jointing the following PVC pipes as per D- 1785 of schedule 40 of wall (above GL) a) 50 mm dia UPVC pipes schedule 40 with required UPVC specials

b) 40mm dia UPVC pipes schedule 40 with required UPVC specials

516.1) Coil earth to steet light poles with No.8 SWG GI wire of 11.5 mtrs of length in which 10 mtrs of total length compressed in to a coil of one meter length

528.1.2)Supplying and fixing of perforated G.I.sheet (GI should be hot dip galvinised) cable tray a) 150 x 50 mm

532.2) Supplying and applying of Wall putty one coat with approved make wall putty for smooth finishing the new cement plastered walls

540.1.3) Supply and fixing of MS stand for fixing outdoor unit

540.1.6.1) Supply & Installtion of star rated Air- Conditioner with copper coil a. 1.5 TR Split Type AC unit (3 Star Rated)

540.1.8.1) Supply, delivery and laying of PVC drain pipe 25mm dia with specials (For AC)

540.1.9.1) Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay

540.2.1) Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 m supplied with AC unit)

608.1) Supplying, laying, fixing and jointing the following UPVC pipes of schedule 40 of below Ground level a) 50mm UPVC schedule 40 with required UPVC specials

b) 40mm dia UPVC pipes schedule 40 with required UPVC specials

609.6) Supply and delivery of 150mm OD of PVC casing pipes (6kglcm2) as per IS 12818 /2010

609.6.1) Supply and delivery of 150mm OD ribbed screen pipes (6kglcm2) as per IS 12818 /2010

609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) a) l50mm dia casing pipes assembly

615.2.1) Labour charges for the erection of submersible pumpset in borewell/openwell a)Up to 5 Hp

615.3.1) Supplying and fixing of Star Delta starter confirming IS13947 of approved make suitable for three phase for submersible Pumpset a)Up to 3 Hp

615.3.2) Supplying and fixing of Star Delta starter confirming IS13947 of approved make suitable for three phase for submersible Pumpset a)Up to 5 Hp

616.4.1)Supplying, laying and jointing the following dia HDPE pipes for sub-mersible pump in bore well Class-5 (1 MPa or 10 kg./cm2 Pressure) a) 40mm dia

619) Supplying, and delivery of following dia of G.I. pipes ‘B’ class & specials a..50mm dia GI pipe

b. 50mm G.I. Union

c.50mm GI Bend

d.50mm GI Coupling

619.2.1) Supplying and delivery of following materials of best approved quality a. 50mm Gate valve

619.9) Supplying and fixing of following dia GM Non Return valve a.50mm dia GM Non-Return valve

707.2.1) Supply and laying of 3 core 4 sq.mm flat type copper cable

742.1) Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

778.2.3) Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level Using Hilux Board Plain Sheets (10mm thick)

799.1) Drilling of Borewell anywhere inculding transportation from one place to another place in alluvial soil or sedimentary a) Drilling of borewell in upto 60m

799.1.2) Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officer’s a)up to 60m depth ending from ground level.

799.2) Drilling of 150mm dia vertical bores in hardrock formation to any required depth using " DTH Rig" (below GL)

799.3) Charges for developing the borewell forthe entire depth with air compressor of 300cfm capacity [Minimum 8 hours]

799.3.1) Supplying and fixing of 160mm dia PVC end cap for borewell

832.5.2)Supplying and fixing in position of UPVC window of casement type( open) for all sizes

832.5.3)Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

929.2) Providing safety equipments: CO2 fire extinguisher : 1 No.; 9 ltrs capacity fire buckets: 3 Nos., & rubber mat : 1 No.

Fire Fighting 929.3) MOTOR DRIVEN MAIN PUMP Supply, erection, testing and commissioning of electric motor driven pump suitable for automatic operation rated for 2280 LPM

DIESEL ENGINE DRIVEN PUMP 929.4) Supply, erection, testing and commissioning of main diesel engine driven pump of horizantal centrifugal type suitable for automatic operation rated for 2280 LPM

JOCKEY PUMP 929.5) Supply, erection, testing and commissioning of mono block jockey pump rated for 180 LPM at 90 M head

BOOSTERPUMP 929.6) Supply installation testing and commissioning of 900 Lpm Pump at terrace level approved

MOTOR CONTROL CENTRE 929.7) supply, errection testing and commissioning of MV panel board made out of 16 SWG thick

Booster pump panel 929.8) supply, errection testing and commissioning of MV panel board made out of 16 SWG thick CRCA sheet

CABLES 929.9) supply ,laying and clamping of 1No. XLPE sheathed armoured/unarmoured heavy duty power cable a. 3C x 50 sqmm Aliminium ( Main Pump Connection)

b.3C x 10 sqmm Aliminium (Jockey Pump Connection)

c.12C x 2.5 sqmm Copper (Diesel Pump)

d.2C x 1.5 sqmm Copper (Pressure Switch connection )

e. 3 C x 10 sqmm aluminium Booster pump Connection pumproom to terrace

930) Supply and drawing bare copper conductors of the following sizes along with wiring / cables and giving connections as required for pumps, panels etc. a. 25 x 3mm GI strips

b. 8 SWG GI Wire

EXHAUST PIPE 930.1) .Exhuast pipe for Diesel engine of 100 mm dia with mineral wool insulation, accoustic suppression with aluminum sheet.

ABOVE GROUND PIPING 930.2) Supply ,laying testing and commissioning of MS "B"class pipe (Heavy)pipe with all specials a. 250mm dia MS "B"class pipe (Heavy)

b. 200mm dia MS "B"class pipe (Heavy)

930.3) Supplying, laying, fitting and fixing , testing and commissioning of MS"B"class pipe (Heavy) pipe a. 150mm dia MS "B"class pipe (Heavy) (Below GL )

b. 150mm dia MS "B"class pipe (Heavy)(Above GL )

c. 100mm dia MS "B"class pipe (Heavy)

d. 80mm dia MS "B"class pipe (Heavy)

e.50mm dia MS "B"class pipe (Heavy)

f. 25mm dia MS "B"class pipe (Heavy)

Butterfly valve 930.4) Supply, installation, testing and commissioning of Butterfly valves, a. 200 mm dia Butterfly valve

b. 150 mm dia Butterfly valve

c. 100 mm dia Butterfly valve

d. 80 mm dia Butterfly valve

e. 50 mm dia Butterfly valve

Ball valve 930.5) Providing and fixing Ball valve PN 20 with hard chrome plated ball inside PTFE (Teflon) seat & ring a.25 mm Ball valve

b. 15mm Ball valve

Non Return valve 930.6) Supply installation ,testing & commissioning of Non Return valve of following sizes a. 200mm dia Non Return valve

b. 100mm dia Non Return valve

c. 80mm dia Non Return valve

d. 50mm dia Non Return valve

AIR Release valve 930.7) Supply ,installation ,testing & Commissioning of 19mm dia metre air release valve made of gun metal complete and made functional

AIR VESSEL TANK 930.8) Supply ,installation ,testing & Commissioning of air vessel made of mild steel of 200MM dia

MS STRUCTURAL WORKS 930.9) Providing and fixing M.S structural work fabricated from standard sections

PRESSURE SWITCH 940) Supply, installation, testing pressure switch bellow type for the automatic operation

PRESSURE GAUGE 940.1) Supply installation testing and commissioning of pressure gauge oil type 4 inch dial as approved

Foot Valve 940.2) Supply installation ,testing & commissioning of Non Return valve of following sizes a. 250mm Dia Foot Valve

b. 80mm Dia Foot Valve

PRIMING TANK 940.3) Supply installation ,testing & commissioning of PVC 2 Layer black of capacity 1000 Lit with required accessories.

HYDRANT VALVE 940.4) Supply installation ,testing and commissioning of Single/Double Headed Hydrant valve

FIRE BRIGADE 940.5) Supplying ,installation of SS 4-way fire brigade inlet connection of 4 nos. 63mm dia a) 2- Way Inlet fire brigade for sump

b.4way Inlet FIRE BRIGADE For 8 blocks stilt floor

HOSE CABINET 940.7) Supplying ,installation of hose cabinet to accommodate two pieces of hose reel of 15 M length along a. Hose cabinet of External type (Double Door & to accomodate Two hose and the Branch Pipe) stilt floor

b. Hose cabinet of External type ( Single Door & to accomodate One hose and the Branch Pipe) for 8 blocks (1 floor 1 No)

940.8) Supply ,installation, testing and commissioning of Controlled Percolating (CP) Hose ISI marked (IS:8423) 63 mm dia x 15 m long

FIRE HOSE REEL 940.9) Supply ,installation, testing and commissioning of Fire Hose Reel (as per ISI) wall mounted,

BRANCH PIPE 950) Supply ,installation ,testing and commissioning of short branch pipe with 63mm female

950.1) Supply installation testing & commissioning of 19mm nominal bore quartzoid bulb type sprinkler

DRY CHEMICAL POWDER TYPE 950.2) Supply and fixing of dry chemical powder type (ABC Type) of 6 Kg capacity,

950.2.1) Supply and fixing Co2 type(2Kg) fire extinguisher new seamless cylinder

950.3)Supply, Erection, Testing and Commissioning of 120 Watts Amplifier w/Power supply unit battery charger 16 Zone switcher control and Microphone with required rack.

950.4) Supply, Erection, Testing and Commissioning of 6 Watt Box Speaker units.

CABLES 950.5) Supply and laying of 2c X 1sq.mm FRLS flixable Cable with 25mm pvc condit pipe

ZONE PANEL 950.6) Supply installation testing and commissioning of conventional type C & I panel having capacity to connect zone panel

HOOTERS 950.7) Supply installation, testing and commissioning of 12W, electronic hooters ( sounders ) with accessories for sounding the alarm when activated.

MANUAL CALL POINT 950.8) Supply installation testing and commissioning of Manual Call points of break glass type with hammer and chain.

950.9) Conventional Smoke Detector Supply installation testing and commissioning of Manual Call points of break glass type with hammer and chain.

CABLES 951.)Supply and surface laying of 2c X 1.5sq.mm shielded FRLS armoured cable including cost of materials and labour charegs in all etc

951.1) Supply,Erection, Commissioning and testing of SOLAR POWER PLANT (Superior variety) - On - GRID System: 25 KWp

951.2) Solar On Grid / Grid Tie Inverter as per MNRE Standards, 3 Phase. 1 Nos of 25 KW.

951.3) Roof Top Mounting structure & electrical Accessories. Mounting structure design to withstand wind velocity up to 150km/hr,

951.4) Supply and Commssioning of Contol Pannel with accessories, Installation of AC DB and DC DB with 4Sqmm 4 core cable

951.5) Laizoning work for Solar Netmeter from State Electricity Board for obtrainging Netmeter including cost of the net meter and allied expenses (LT Consumer)

951.6) CEIG Approval (LT Consumer)

Lift Arrangements 958.4) Design Engineering Supply, Fabrication, Erection, Testing, commissioning and handling of 13 persons (884 kg) capacity (G+9 floor)

959.2) Erection, Testing and commissioning of 100KVA Diesel generator set. With AMF Panel

959.3) Insulation for the residential silencer (supply of residential silencer to be included under item for DG Sets)

959.4) Supply and installation of M.S. cable adopter box

959.5) Supply and installation of MS exhaust pipe of suitable thickness with 100mm dia

959.6) Supply and installation of MS exhaust pipe of suitable thickness with 125 mm dia complete with MS wall / ceiling support, etc.

959.7) Supply and insulation of exhaust pipe thermal insulation lagging with mineral wool

959.8) Supply and installation of stainless steel rain hood / rain cap / bend at top of the exhaust pipe

959.9) Preparation of necessary drawings for approval CEIG

960.4.1) Numbering & lettering arrangements Supply and fixing of Aluminium TNPHC Emblem of 18" height

960.4.3) Supply and Fixing of 12" Height Aluminium letter s

960.4.4) Supply and fixing of 9" Height Aluminium letters

960.4.5) Supply and fixing of 20"x5" size plastic foam name plate

960.4.6) Supply and fixing of 24"x8" plastic foam name plate with vinyl cutting letter RWH Board

K. BASKARAN & CO (BID ID -1261993)

Bidder Name

Britto Dhanasekaran

K. BASKARAN & CO