REPAIR/REPLACEMENT TO JOINERY/PANELING/FALSE CEILING AND OTHER MISC B/R WORKS AND REPAIR/REPLACEMENT/CLEANING OF SEWAGE LINE, MANHOLES, SEPTIC TANK AND SOAK WELLS ETC FOR OTM ACCN AT OAF UNDER GE 970 EWS

Amount

Taking down chowkats or frames not exceeding 1.5 sqm each but with shutters (without taking off shutters from the frame), complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each but with shutters (without taking off shutters from the frame), complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each, complete all as specified and as directed.

Taking down shutters of any description not exceeding 1 sq. m each, complete all as specified and as directed.

M&L for first class hard wood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and as directed.

M&L for first class soft wood glazed and skelton shutters 35mm thick, open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats,, complete all as specified and as directed.

All as per item No 6 here-in-before but 30mm thick, complete all as specified and as directed.

M&L for second class soft wood rail and style plain framed panelled shutter (two panel) 35mm thick with lock rail and panel of 9mm B.W.P. commercial ply or 12mm venerered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

M&L for preparation of new wooden or wood based surfaces of any description, over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

S&F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing, complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors ladders, framed balusters, walk ways, railings, framework of water tanks and similar work, conforming to Fe.290.Gde-E-165 in repairs, complete all as specified and as directed.

S&F Butt Hinges medium weight cold rolled mild steel 125 mm long, complete all as specified and as directed.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100mm long, complete all as specified and as directed.

S&F aluminum anodised barrel tower bolts of extruded section 150mm long, complete all as specified and as directed.

S&F aluminum anodised barrel tower bolts of extruded section 100mm long, complete all as specified and as directed.

S&F 150 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, complete all as specified and as directed.

S&F Aluminum anodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy , complete all as specified and as directed.

S&F Aluminum anodised bow handle fabricated type extruded section of 150mm long, complete all as specified and as directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to fixed with steel framed work and wooden framed work with & incl necessary items, complete all as specified and as directed.

S&F in repair sheet glass 4.00 mm thick ordinary quality and glazing with oil putty in square, rectangle n.exc 0.5 Sqm in each pan and including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadsall, complete all as specified and as directed.

S&F for sheet glass 4.0mm thick ordinary quality and glazing with oil putty in square n. exec 0.5 Sqm in each pane, complete all as specified and as directed.

S&F in repair Harrison rails (Curtain rod//drapery rod), 20mm dia, powder coated with and including fency type PVC bracket 2 Nos of each opening and side stopper fancy type powder coated of required shape and size 2 Nos of each opening, complete all as specified and as directed.

S&F aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 6 to 8 kg, complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings, complete all as specified and as directed.

S&F 0.63 galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with J or L type hooks in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed.

S&F 0.8 mm thick plain galvanised,mild steel sheeting, with grade of zinc coating 275 as in ridges, hips vally gutters drip and straight flashing (length and grith as fixed), complete all as specified and as directed.

M&L for preparing new steel surfaces of any description, over exceeding 10 cms width or girth applying two coats of synthetic enamel paint over one coat of red oxide /zinc chrome primer, complete all as specified and as directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flushing of reuired machine moulded shape and size, complete all as specified and as directed.

S&F 12mm thick Gypsum board fixed in anodised aluminium snap grid 605 X 605mm frame work as in false ceiling including hangers 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long fixed with including dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and as directed.

S&F in repairs 2nd class softwood 15mm thick boarding as required planed one side and edges tongued and grooved or rebated for ceilings fixed with nails in any situation with and including applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

S&F for 6 mm veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face decorative veneer and one face plain of required texture & colour fixed with nails to timber frame work for any surface fixed in repairs, complete all as specified and as directed.

M&L for 25 mm thick 2nd softwood planed one side & edges tongued and grooved or rebated, and fixed with nails and including dismantling of boarding any description, fixed in any position with nails including fillets, complete all as specified and as directed.

S&F in repair for 2nd class hardwood (wrought) in scantling for timber frame and fixed, complete all as specified and as directed.

M&L for second class hardwood plain fillets in square, rectangular or triangular in section, clean sawn, secured with nails or boards exc 6 Sq.cm & n.exc 13 Sq.cm with and including two coat of French polish, complete all as specified and as directed.

S&F 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in shelves, partition, wall and lineing with and including dismantling boarding, any description , fixed in any position with nails, complete all as specified and as directed.

S&F 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in partition wall with including dismantling wall (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and as directed.

S&F 0.9mm thick decorative laminate type-1, of surface finish, colour and pattern as approved fixed with approved adhesive as per marker's instructions, complete all as specified and as directed.

M&L for taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and fair, complete all as specified and as directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channel and drain including necessary use and waste of form work, complete all as specified and as directed.

Excavation in trench not exceeding 1.5M wide and not exceeding 1.5M in depth not exceeding 10 sqm on plan and getting out in any type of soil, complete all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in any type of soil, complete all as specified and as directed.

Removing surplus excavated material to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point, complete all as specified and as directed.

Demolition and breaking up 300 mm dia drain pipes (Salt glazed ware,AC or reinforced concrete ) set in cement mortar, complete all as specified and as directed.

M & L concrete bed 1 : 3 : 6 type - C-2 to drain pipe including packing under, and haunching against the sides of pipes after they are laid and tested for 300 mm drain pipes, complete all as specified and as directed.

S & F Reinforced concrete pipes 300 mm bore, class NP2 , laid and jointed complete with collars, complete all as specified and as directed. .

M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, sub base / mass concrete etc, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, dry, complete all as specified and as directed.

M & L 60 mm thick interlocking tile (ISI marked) of M-30 mix laid over dry sand cushioning, with grey cement and pigment , filling of joints with sand & compaction after filling of joints and edges shall be secured with PCC 1:2:4 type B-0, complete all as specified and as directed. (Note : Supplying and spreading for sand cushioning shall be measured and paid separately) .

M & L Precast cement concrete block Type B1 1:2:4 (20 mm graded aggregate) masonry with solid blocks exc 10 cm in width and setting in mortar 1:6, complete all as specified and as directed.

M&L for old size brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 for walls with including demolition of brick work / PCC block masonry or stone/Boulder masonry built in cement mortor incl all quoins arches pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles , complete all as specified and as directed.

M&L rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete with and including preparing new plastered or unplastered surfaces on walls and applying two coats of oil emulsion distemper of surface upto ture finish over a coat of water base primer, complete all as specified and as directed.

M&L rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete with and including taking down cement or lime plaster of any description from stone /brick/concrete wall etc incl raking out joints hacking for key scrurbbing down with water and disposing of the rubbish and preparing new plastered or unplastered surfaces on walls and applying two coats of oil emulsion distemper of surface upto ture finish over a coat of water base primer, complete all as specified and as directed.

M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete with and including taking down cement or lime plaster or racking of pointing and scrubbing out existing finishes on wall of any for three storey bldg incl all necessary arrangement like scaffolding and masonry and preparing new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk whiting, complete all as specified and as directed.

Supply and spreading sand filling under floors or interlocking tile or in foundation including watering and consolidation, complete all as specified and as directed.

M & L chequred cement concrete tile (ISI marked) 30 cm x 30 cm or 40cm x 40cm and 25 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 20 mm thick screed bed in cement mortar 1:6 including dismatling of old tiles, complete all as specified and as directed.

M & L endura Industrial Tiles 30 cm x 30 cm x 10 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 20 mm thick screed bed in cement mortar 1:6 including dismatling of old tiles, complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in slab supported on wall, landings balconies, canopies, deck slabs and shelves etc complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L anti - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.

M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.

All as per item No 64, but on vertical surfaces such as skirting over with and including 10mm thick backing coat in CM 1:4, complete all as specified and as directed.

M&L for glazed ceramic tiles coloured designer and pattern (light & dark shade combination) in vertical surface 450X 300X 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:4, complete all as specified and as directed.

M&L for glazed ceramic tiles in vertical surface 300x 200x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:4, complete all as specified and as directed.

M&L for virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.

All as per item No 68, but on vertical surfaces such as skirting over with and including 10mm thick backing coat in CM 1:4, complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 20 to 22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 20mm thick screed bed in CM 1:6, complete all as specified and as directed.

All as per Item No. 70 above but 15 to 18mm thick in riser of steps, skirting, dado and pillar laid over with and including 10mm thick backing coat in CM 1:4 and jointed, complete all as specified and as directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite with and including 20mm thick screed bed in CM 1:4 , complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and as directed.

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections complete all as specified and directed

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections complete all as specified and directed

S&F in repair safety locks mild steel with 4 levers for rolling shutter including removal of existing locks and fixing of new lock with complete accessories complete all as specified and directed.

S&F in repair ball bearing for rolling shutter including of removing of top cover of rolling shutter of any specifiction , fixing of new ball bearing , refixing of top cover of rolling shutter complete all as specified and directed.

Fixing only in repair of rolling shutter including of removing of top cover of , greasing , removing og bending of shutters , new fixing of anchoring rod, hasp, servising of springs , shutter running channels , etc , of rolling shutter of any specifiction , refixing of top cover of rolling shutter and make smooth opening and closing rolling of shutter, of shutter of any size , gear operated, or chain and pully etc , completed all as specified and directed.

Cleaning /clearing and maintenance of sewage lines, manholes including CI/PVC stacks, gully traps, floor traps, under ground lines any depth by removing any type of blockage from drain / drain pipe upto and including 250mm dia by mechanical machine method / manually (using pipe cleaning machine with auger function standard or specialised / manually) from manholes and flushing with water with pressure using water hose pipe connected with water trolleys after cleaning including manholes, sludges/sludge effluent to be disposed off as directed by Engr-in-Charge including taking off manholes covers and re-fixing the same after cleaning of sewage lines/manholes cleared/cleaned. Under this item are to be maintained and kept fully functional by removing any type of blockage for 11 months from the date of commencement of first work order. The cost of this operation/provision shall be deemed to be included in unit rate quoted by the contractor. Also contractor/Supervisor will attend the AGE B&R-I office /complaint cell at 09:00 am to receive complaints and further action within 24 hrs, complete all as specified and as directed.

Dewatering of contaminated waste effluent from septic tank/soakage well of any capacity and depth by vehicle mount sewage cleaning machine and jetting and disposal to low lying area upto distance of 5Km including taking off and re-fixing manholes covers etc, complete all as specified and as directed.

Cleaning of septic tank of any capacity and depth including inlet chamber, outlet chamber removing out all sludge, silt, residue waste material (organic/inorganic nature) by mount sewage cleaning machine and required manpower after plugging the incoming sewage line and depositing the waste upto 5Km distance and burring the same in suitable size of pit and covering the same with earth and removal of surplus soil , complete all as specified and as directed.

Notes : Rates against item No. 79 to 81 includes for: (i) Cleaning and clearing/disposing off all the sludge sewage contaminated water in solid/ semi solid/ liquid state from sewage lines, manholes etc as detailed in above item No. 79 to 81will be carried out during the 1st 3 months from the date of commencement of work order No.1 and there after shall be maintained for blockage free and smooth functioning of all the sewage lines and related sewage items as detailed in item No.1 above for a period of eight months i.e., the date of completion of contract given in work order No.1. Engagement one supervisor alongwith two sweeper cum sewage drain attendant alongwith T&P required on daily basis for a period of eleven month for attending the daily sewage related complaints. The complaints shall be collected daily at 09:00 hours from the office / complaint cell of Engr-in-Charge by Contractor / Contractor's supervisor and shall be got signed from the user occupant after clearing the complaints. These complaint slips will also be got signed at Engr-in-Charge office daily after the satisfactory completion of each complaint. No complaint shall be kept pending / unattended for a period of 48 hours. Any damage to manhole covers, gully trap covers, CI access doors of CI pipes any dia, PVC pipes/fittings, 'P' traps, floor traps during the process of cleaning/clearing shall be made good by the contractor by the contractor by replacing same by new items without any extra cost to the Govt. (ii) If contractor fail to complete the complaint within stipulated period i.e 48 Hrs a recovery of Rs. 300 per complaint per day will be levied.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level n. exc 1.5m above the starting point, complete all as specified and as directed.

M&L for salt glazed stoneware (SGSW) grade 'A' drain pipes 100mm bore laid in trenches and jointed on concrete bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 with and including demolition and breaking up drain pipes, 150 mm dia (PVC, salt glazed ware, AC or reinforced concrete) set in cement mortar, complete all as specified and as directed.

M&L for salt glazed stoneware (SGSW) grade 'A' drain pipes 150mm bore laid in trenches and jointed on concrete bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 with and including demolition and breaking up drain pipes, 150 mm dia (PVC, salt glazed ware, AC or reinforced concrete) set in cement mortar , complete all as specified and as directed.

M&L for salt glazed stoneware (SGSW) grade 'A' drain pipes 200mm bore laid in trenches and jointed on concrete bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 with and including demolition and breaking up drain pipes, 150 mm dia (PVC, salt glazed ware, AC or reinforced concrete) set in cement mortar, complete all as specified and as directed.

Cutting into existing manhole removing existing drain making good to wall and rendering cutting out branch channel and making good benching for 100mm dia pipe in cement concrete 1:2:4, complete all as specified and as directed.

Description all as per itme No-87 but 150mm dia, complete all as specified and as directed.

Description all as per itme No-87 but 200mm dia, complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks with and including demolition of brickwork built in cement mortar, complete all as specified and as directed.

M&L rendering 15 mm thick in CM 1:4 cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair, complete all as specified and as directed.

Demolition of reinforced cement concrete of any descritption and in any position not otherwise speccificallt provided for, complete all as specified and as directed.

M&L for precast RCC 1:2:4 Type-B1 (using 20mm graded crushed stone aggregate) as in manhole cover slab and similar article with plain faces, set in cement 1:4, complete all as specified and as directed.

S&F TMT Mild Steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Dismantling of cement concrete (unreinforced) of stone aggregate at any position not otherwise specifielly provided for, complete all as specified and as directed.

PCC 1:2:4 type B1 (12.5mm graded aggregate ) as in coping including necessary form work, complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) pipes (conforming to IS 651 : 2007) single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes, complete all as specified and as directed.

S&F 75 in repair mm bore PVC (SWR) pipes (conforming to IS 651 : 2007) single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes, complete all as specified and as directed.

S&F in repair 110 mm PVC (SWR) access door bends any radius including taking down old, complete all as specified and as directed.

S&F in repair 75 mm PVC (SWR) access door bends any radius including taking down old , complete all as specified and as directed.

S&F in repair 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door, complete all as specified and as directed.

S&F in repair 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door, complete all as specified and as directed.

S&F in repair 110mm PVC (SWR) vent cowl, complete all as specified and as directed.

Only fixing in repair cast iron pipe 75mm bore fixed with walls, complete all as specified and as directed.

Only fixing in repair cast iron pipe 100mm bore fixed with walls, complete all as specified and as directed.

M/S Sultan Enterprises (BID ID -3090317)

M/S B S CONSTRUCTIONS (BID ID -3088055)

M/S maqsood enterprises (BID ID -3088923)

M/S GHULAM HASSAN KUCHAY (BID ID -3088873)

M/S B A Traders (BID ID -3089743)

M/s Nasir Rasool Dar (BID ID -3089252)

M/S LATIF AHMAD BABA CONSTRUCTION (BID ID -3085401)

FIRDOUS AHMAD BABA (BID ID -3090109)