GE (N) P/TOKEN- 48 OF 2020-2021 REPAIRS TO PLASTER, ROOFING, EXTERNAL AND INTERNAL FINISHES TO DAD AND PCDA OFFICE AND MISC CIVIL WORKS IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

Taking down door and refixing shutters after making necessary repair of any description exc 1.0 Sqm nut not exc 2.0 Sqm each.( Note :- Builders hardware used in repairs shall to measured separately)

Taking down chowkats or frames with shutters not exc. 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkats or frames with shutters exc. 1.5 Sqm but not.exc 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down shutter from frame of following description exc 1.00 Sqm but not exceeding 2.00 Sq.m each complete all as specified and directed.

S&F factory made 100% solid wood plastic composite (WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum complete all as specified and directed.NOTE: During fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. Make: Rajshri/ Sintex/Duraplast/Accucell

Supply and fix for 35 mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including 30mmx 4mm thick 2nd class hard wood plain cover fillets on all sides complete all as specified and directed.

Supply and fix for factory made solid Panel PVC door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail, bottom rail; panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90°) and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings complete all as specified and as directed. Make: Rajshri/ Sintex/Duraplast/Accucell

Factory made wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling shall be of wire gauze of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4 mm . The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S.tubes. The wire gauge shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing Make: Rajshri/ Sintex/Duraplast/Accucell

S&F Capsule type automatic door closure stainless body 150mm long of make Godrej or equivalent

S&F in repairs 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as spd

S&F in repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as spd

S&F Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as specified and as directed

M&L for double charged vitrified ceremic tiles 10 mm thick (square/rectangular) polished, area of each tile exc. 0.18 sqm not exceeding 0.36 sqm, in flooring etc , laid over and including screed bed of 15 mm thick cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for double charged Vitrified ceremic tiles 10mm thick of approved shade as in vertical surfaces, skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade over and including screed bed of 10mm thick in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for PCC (1:5:10) type E2 (using 40mm graded stone aggregates) as in sub base including demolition of existing PCC and removing rubbish off the premises complete all as specified and directed.

M&L for 25mm thick coloured Glossy Chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.20sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including screed bed of 15 mm thick cement mortar 1:4 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premisescomplete all as specified & directed.

M&L for coloured glazed ceramic highlighter tile of size 600mm x 300mm x 7 to 8mm thick, colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 etc including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified & as directed.

M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like over and including 15 mm thick screed bed of CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20 to 25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab all as directed by Engineer-in-Charge.

M&L 40mm thich plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in floor/ court yard, finished even and smooth with using extra cement including demolition of existing cement concrete removing rubbish off the premises complete all as specified and as directed.

Supply and fix Glass dividing strips 3mm thick and 38mm width of strip.

M&L 75 mm thick plain cement concrete (1:3:6) type C-1 using 20mm graded stone aggregates as in plinth protection, concrete shall be laid in alternate bays not exc 3.0m in length, finished even and fair including demolition of existing cement concrete removing rubbish off the premises complete all as specified and as directed.

M&L Brick work with fly ash old size bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6 including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed.

All as per serial item No. 29 here-in-before but except bricks

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement with sagol finish including taking down cement plaster on brick/ stone wall , raking out joints, hacking for key scrubbing down with water etc. and removing rubbish off the premises complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement on brick/ stone wall , complete all as specified and as directed. (Upto a height of 15 metre)

M&L for 15mm thick cement plaster in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement with sponge finish using water proofing compound @3% or as per manufactuer's instructions and taking down cement plaster on brick/ stone wall including raking out joints, hacking for key scrubbing down with water etc. and removing rubbish off the premises complete all as specified and as directed. (Note: Waterproofing compound shall be measured and paid separately under relevant item as supply only).(Upto a height of 15 metre)

Supply only liquid water proofing compound make pidicrete of pidilite /cement mix plus of berger all as spd and directed.

M&L for preparation of new plastered or unplastered surfaces wall and applying two coats of exterior emulsionacrylic paint over a coat of primer all as specified and directed. (Upto height of 15 metre).

M&L for preparation of old plastered or unplastered surfaces wall and applying two coats of exterior acrylic emulsion paint over a coat of primer all as specified and directed. Upto height of 15 mtr.

M&L for preparation of new plastered or unplastered wall surfaces of any description over 10cm girth or width not otherwise described and applying two coats of acylic distemper over a coat of primer all as specified and directed.

Material and labour for two coats of Latex shield 2K make Berger or equivalent grade of pidilite in sunken portion , terrace complete all as per manufacturer's instructions and as directed.

Taking down and removing old water proofing treatment of any description of roof slab and cleaning the surfaces with wire brushes, removing dust, foreign materials and removing the rubbish, debris off the premises to distance exc. 100m and not exc 250m complete all as directed. (upto a height of 15 metre)

M&L for two coats Home Shield PU roof coat of Berger make or equivalent chemical of Pidilite over a coat of primer over plastered surface/ concrete surface of roof including preparation of surface complete all as per manufacturer's instructions and as directed.

Material and labour for removing of plants, bushes, weeds with roots from walls, roof, chajja, canopy, parapets, roof kerbs, around water tanks, stagings, outlets junctions of water pipe lines , waste water pipe, bends and filling the disturbed area with cement concrete (1:1.5:3) or cement mortar (1:3) using water proofing compound as per manufacturer's instruction and making the patch finished as per surroundings complete all as specified and as directed. (Note: Rate quoted is deemed to be included for scaffolding, safety measured required for working on or up to height of 15 metres vertical slopes)

M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces ready to receive new finish complete all as specified and directed. (For item No. 44, 46, and 48 as applicable)

M&L for complete removal of existing treatment on ceilings using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces ready to receive new finish complete all as specified and directed. (For item No. 45, 47, 49 and 50 as applicable)

M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces.

M&L for applying wall care putty 1 to 1.5 mm thick on celing surfaces.

M&L for applying one coat of alkali resistant priming paint on wall.

M&L for applying one coat of alkali resistant priming paint on celing.

M&L for two coats of acrylic distemper of approved tint on wall surfaces

M&L for one coat of acrylic distemper of approved tint on ceiling surfaces

M&L for one subsequent coat of acrcylic distemper on surface of ceiling

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.

M&L for one subsequent coat of acrcylic distemper on surface of walls complete all as specified and as directed.

Preparation of old treated plastered/ unplastered surface of ceiling by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.

M&L for preparation of old decorated surfaces of any description over 10cm girth or width not otherwise described and applying two coats of white wash on walls

M&L for preparation of old decorated surfaces of any description over 10cm girth or width not otherwise described and applying one coats of white wash on ceiling

Supply and fix for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for preparation of old surfaces of wood and wooden based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint over one coat of pink primer,

M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint over a coat of oxide primer,

M&L for preparation of old surfaces of wood and wooden based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint,

M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint.

M&L for preparation of old painted wooden/asbestos surface in ceiling and applying one coat of synthetic enamel paint

M&L for preparation of old treated plastered / unplastered surfaces by brooming down with steel brush and applying one coat of cement base paint complete all as specified and as directed. (upto height of 15 Metres)

Material and labour for preparation of old treated plastered or unplastered/ concrete surfaces by brooming down with steel brush over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Removing debrises obtained from demolition from various locations (other than this work) to a distance of exceeding 3Km but not exc. 5Km outside MOD land complete all as as directed. The location at out side MOD land for disposal of debris material shall be located by the contractor himself).

Supply and fix for 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as per IS 1003 (Part-I) and as specified in SSR Par-I, Section 8, clause 8.24 (a) complete all as specified and as directed.

Supply and fix for aluminium powder coated three track sliding window with two glazed shutters, one with 4mm thick float glass ordinary quantity and one shutter with stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc Catalouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604 including taking down existing window complete all as specified and as directed.

Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan opening using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc including taking out old ventilator complete all as specified and directed.

Supply and fix for MS frame made out of 25mm X 25mm square tube 14 gauge thick, 25mm x 38mm, aluminium rectangular tube, fixed over mild steel frame to shape semi circular/ rectangular over and including 4mm thick coloured aluminium composite panel (sheet) fixed with screws, cover joints filled with silicon and tape as in semi circular/ rectangular sunshade of windows, doors, gate etc. or in wall cladding complete including taking down existing panel all as specified and as directed

Material and labour for hacking out old broken glass (any thickness, size, and quality of description) from metal/ wooden frame including punching or drilling out old glazing pins, spring clips and providing and fixing new ones and supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty/ bead in square not exc. 0.5sqm in each pane complete all as specified and as directed.

Supply and fix in repairs for floor door stopper of brass alloy body and tongue with hard drawn steel spring of over all length of cover plate 150mm complete all as specified and as directed.

S&F in repair 12mm to 12.5mm thick mineral fibre false ceiling board only all as specified including dismantling of ceiling board and removing rubbish off the premises complete all as specified and as directed. Make :- Armstrong, Diaken, New Age (ACE). Note : the hight of ceiling is up to 5 Metres.

Supply and fix for 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, ISI marked, complete all as specified and as directed.

Supply and fix for 150 mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.

Supply and fix for 150mm size aluminium handles, anodised, cast type complete all as specified and as directed.

Supply and fix for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 140mm all as specified and as directed.

Supply and fix in repair for vitreous china European type wash down water closet pan, (Pedestal pattern) white with P or S trap including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, necessary inlet and outlet connections including PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets and PVC flush pipe 32mm dia including making good complete all as specified and as directed.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces complete all as specified and as directed.

Supply and fix in repair for vitreous chinaware wash hand basin, white, flat back, size 630mmx450mm including 32mm dia. chromium plated, CP waste coupling, chain and plug, waste fittings, union and PVC waste pipe 32 mm dia of 90cm long, CI brackets and all necessary inlet outlet connections complete all as specified and as directed.

Supply and fix in repair for vitreous china, squatting pan, 'Orissa' pattern, complete of size 580 mm x 440 mm, white, with CI 'P' of 'S' trap, front or back inlet and foot rests any pattern, including provision of lime concrete and all necessary fittings, connections for inlet, outlet, anti-syphonage pipes, etc. complete all as specified and as directed.

Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.

Material and labour for 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.

Material and labour for 6mm thick plywood, grade BWR, type BB, number of ply 5 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.

Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.

Material and labour for 1st class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 3 Sq.cm but not exc. 6 Sq.cm complete all as specified and as directed.

Material and labour for 1st class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 6 Sq.cm but not exc. 13 Sq.cm complete all as specified and as directed.

Material and labour for 1st class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 13 Sq.cm but not exc. 25 Sq.cm complete all as specified and as directed.

Taking down & removing old water proofing treatment of any description including plaster and cleaning the surfaces of slab with wire brushes, removing dust, foreign materials including flushing at junctions of wall and removing the rubbish off the premises to a distance exc. 500 m & n exc 1.5km all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar (1:3) mixed with integral water proofing compound @3% by weight of cement on roof slab finished even and fair complete all as specified and as directed. (Note: Waterproofing compound shall be measured and paid separately under relevant item).

M&L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregates) as in sunken floors using water proofing compound as per manufacturer's instruction complete all as specified and as directed. (Note: Supply only of waterproofing compound shall be measured and paid separately under relevant item).

M & L Loose filling with broken brick of gauge 40 to 80 mm in sunken floor complete all as specified and as directed.

Material and labour for thick lime concrete with lime morter 1:2 mix and 40mm graded brick aggregate in sub base of sunken floos rcomplete all as specified and as directed

Material and labour for PCC (1:5:10) type E-2 (using 40 mm graded broken stone aggregate) as in foundations, filling, sub base and mass concrete complete all as specified and as directed.

Material and labour 100mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 50mm bore single socketed in any length with rubber ring joints laid in trenches or in floor/ fixed to wall including demolition and breaking up existing unserviceable pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 40mm bore single socketed in any length with rubber ring joints laid in trenches or in floor/ fixed to wall including demolition and breaking up existing unserviceable pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floor/ fixed to wall including demolition and breaking up existing unserviceable pipe complete all as specified and as directed.(Upto height of 15 Metres).

Supply and fix for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floor/ fixed to wall including demolition and breaking up existing unserviceable pipe complete all as specified and as directed.(Upto height of 15 Metres.)

Supply and fix in repair for PVC (SWR) bends any radius of 75mm bore with access door complete all as specified and as directed. (Upto height of 15 Metres.)

Supply and fix in repair for PVC (SWR) bends any radius of 110mm bore with access door complete all as specified and as directed. (Upto height of 15 Metres.)

Supply and fix in repair for PVC (SWR) branch piece, single Y, equal or unequal with access door for 75mm bore pipe complete all as specified and as directed. (Upto height of 15 Metres.)

Supply and fix in reapir for PVC (SWR) vent cowl for 110mm bore pipe complete all as specified and as directed. (Upto height of 15 Metres.)

Supply and fix in repair for PVC (SWR) floor trap 75 mm dia of outlet, plain with CP grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

Supply and fix in repair bib tap for 15mm bore pipe, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: Prayag ‘Naptune series Cat No. PIS-06 or equivalent of makes as per Appx 'B' as approved by GE complete all as specified and as directed.

Supply and fix in repairs stop valves for 15mm bore pipe, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repair stop valves for 15mm bore pipe, fancy type, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repair brass chromium plated fancy type shower rose 125mm size with swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

Material and labour for roughning of damaged irregular surface of old concrete by picking sweeping cleaning and washing with water and rendering on surface of chajjas, roof projections ceiling facia etc. 15mm thick in cement mortar (1:4) over cement slurry thick coat @ 3 Kg/Sqm making the surface even & fair followed by 5 mm thick rendering in CM 1:3 finished even and smooth without using extra cement including making of drip course as required including applying two coats of weather proof acrylic emulsion paint over a coat of primer complete all as specified and as directed. (Upto height of 15 Metres). Note: Rate for form work shall be deemed to be included in the rate quoted by the contractor

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick wood grain printed PVC sheets and edges will be painted to match with printed sheet, reinforced with mild steel square tube complete all as specified and as directed. Make: Rajshri/ Sintex/Duraplast/Accucell

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in lintels upto 1.5m clear span, seismic and other similar bands, cills, plinth courses, roof kerbs, parapets, coping, benching, coping, hold fast blocks, bed blocks/ bed plates, kerbs for interlocking tiles etc. including weathering, slightly rounded or chamfered angles and throating including necessary form work all as specified and as directed.

Material and labour for precast RCC (nominal mix) (1:2:4) type B-1, (using 20mm graded broken stone aggregates) as in manhole covers including form work/ mould complete all as specified and as directed.

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Surface dressing not exc. 15cm deep including trimming of natural ground cutting berms to provide proper slope, removing vegetationin soft/ loose soil including removing excavated material outside MOD land and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

S&F stainless steel utensil racks for modular kitchen including latches, magenetic hinges, handles and all necessary fittings required for modular kitchen, all as specified and directed by Engineer in charge. Consisting of following components;- (a) 3mm dia stainless steel cup plate rack. (b) 3mm dia stainless steel meal plate rack. (c) 3mm dia stainless steel catlery basket. (d) 3mm dia stainless steel bottle basket plate rack. (e) stainless steel hinges 19mm long L type. (f) stainless steel hinges 12mm L type. (g) stainless steel hinges 6mm long L type. (h) stainless steel sliding channel. Notes: 1. Weight of each unit shall be assessed through BOO. 2. PVC parts/shutters shall be measured and paid separately under item No. 117 below.

Supply and fix for solid PVC double door frame of size 50mm x 95mm, made out of 5 mm thick wood grain printed PVC sheets and edges will be painted to match with printed sheet, reinforced with mild steel square tube complete all as specified and as directed. Make: Rajshri/ Sintex/Duraplast/Accucell

Supply and fix for magnetic catch, heavy duty and connecting plate to shutters and frame complete all as specified and as directed.

S&F Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and as directed.(Make Rajshree/sintex) Note: PVC fillets and PVC strips shall be measured and paid seperately.

S&F 18 mm thick dark coloured solid PVC sheet suitablely fixed as in shelving, shutters of cupboard, kitchen trolly/ cabinets etc. as per direction and specifications. Make: Rajshri/ Sintex/Duraplast/Accucell

Supply and fix for 100mm size brass handles, cast type, polished complete all as specified and as directed (conforming to the sample kept in GE office).

Supply and fix for 125mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Supply and fix for 100mm size butt hinges, cast brass, type B-11 with mild steel hinge pin, bright polished and fixed with screws complete all as specified and as directed .

S&F Solid PVC wall lining consisting of 25mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete all as specified and as directed.(Make Rajshree/sintex) Note: PVC fillets and PVC strips shall be measured and paid seperately.

Supply and fix in repairs drapery/ curtain rod of 25mm dia, decorative type, stainless steel complete all as specified and as directed.

Supply and fix in repair brackets for drapery/ curtain rod 20mm bore, decorative type, stainless steel complete all as specified and as directed.

Supplying and laying of 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down old 15 mm GI tubing & fittings complete all as specified.

Supplying and laying of 25mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down old 20 mm GI tubing & fittings complete all as specified.

Supplying and laying of 32mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down old 25 mm GI tubing & fittings complete all as specified.

Supply and fix for 15mm size PVC connection 450mm long including PTMT nuts etc complete all as specified and as directed

Supply and fix in repairs chrome plated quarter turn wall mixer 3-in-1 system with provision for both telephone shower and overhead shower complete with wall flange with 115mm long bend pipe, connecting legs Cat No. FUS-29281 of make Jaquar ‘FUSION' Series or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repairs, chromium plated single lever extended basin mixer (height 85mm) without popup waste system with 450mm long braided hoses as per Cat No.FUS-29023B of make Jaquar ‘FUSION ' series or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repairs, brass chromium plated bib tap quarter turn with right hand operating knob 15mm dia as per Cat No. CQT-23127 of make Jaquar or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix for 32mm bore dia, low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq cm as waste pipe for wash basin/flush pipe for flushing cistrern outlet including tee, elbow, bend etc complete all as specified and as directed.

Providing and laying 4 mm thick SPC (Stone Poymer Composite) flooring & skirting of Welspum or equivalent make with glue free click connected joinery system ( tougue and groove interlocking system) in handscraped/brushed/oiled finish including covering the expansion gaps with beading and finishing the junction of adjoining floors with R or T profile of WPC (wood polymer composite ) complete all as per direction of Engineer in charge.

Supply and fix for 10mm thick toughened glass with etching as in openable door/ bathing cubical/ partitions including chamfered edge polishing fixed with necessary Ozone path touch fittings and fixtures etc. as per manufacturer's instructions complete all as specified and as directed.

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

M/s RAJKUMAR MANIKRAO PATIL

Pratap enterprises