SPECIAL REPAIR TO NUCLEAR MEDICINE BUILDING AT CH EC UNDER GE ALIPORE KOLKATA

Amount

NOTES :(i)The bidders/contractors are advised to read tender document & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates. SCHEDULE 'A' PART - I FOR B/R PORTION (Sl No 02 to 100 )

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for fly ash Brick work with bricks class designation 75, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

Material and labour for old servicable brick work with bricks straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 completes as and specified and directed. Note:-The brick shall be re-used obtained from demolition of brick work at relevant items of BOQ.

Material and labour for fly ash brick work with bricks class designation 75, size as per old size brick, straight or curved on plan exceeding 6 m mean radius half brick thick walls built in Cement Mortar 1:4 complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal outside of MOD land complete all as specified and as directed.

Rendering 15 mm in Cement Mortar 1:6 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement to the plastered surface complete all as specified and as directed.

Material and labour for Rendering 15mm thick plaster in Cement Mortar (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement, with water proofing treatment. Note:- Water proofing compound shall be measure and paid separately

Rendering 5 mm in Cement Mortar 1:3 on fair faces of brick work or concrete ceiling surfaces finished fair

Material and labour for Preparation of new plaster ceiling surface and applying two coats of acrylic washable distemper over a coat of primer over a coat of 1.5 mm thick cement base wall putty complete all as specified and directed.

Material and labour for Preparation of new surface and applying two coats of acrylic washable distemper over a coat of primer over a coat of 1.5 mm thick cement base wall putty complete all as specified and directed.

Material and labour for complete removal of existing finishing of internal wall surface of building/structure by mechanical appliance and preparation of old surfaces and applying two coats of acrylic washable distemper over a coat of primer complete all as specified and directed.

Material and labour for complete removal of existing treatment of external wall surface of building/structure by mechanical appliance and preparation of old surfaces and applying two coats of acrylic exterior weather resistant paint(weather proof paint) over a coat of acrylic primer as spcefid in clause No 17.17 of SSR Part-I 2009 complete all as specified and directed.

Material and labour for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel and iron surfaces of any description over exceeding 10 cm in width or girth complete all as specified and as directed..

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to stores and rubbish off the MOD premises complete all as specified and as directed.

Material and labour for 25 mm thick plain cement concrete M-15(Nominal Mix) using 12.5mm graded stone aggregate as in floor, fair finished complete all as specified and as directed.

Material & Labour Non skid ceramic tiles, coloured, 7 to 8 mm thick (square/rectangular area of each tile exceeding 0.11 Sqm and not exceeding 0.18Sqm , in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed layer in CM (1:4) including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushign neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and as directed.

Material & Labour Glazed ceramic tiles 450x300x7 mm(Coloured) on vertical surfaces such as skirting, dados and riser to steps etc. Set and jointed in neat cement slurry and pointed in coloured cement to match complete over 10mm thick screed bed vertical layer in CM (1:4)all as specified and as directed.

Material & Labour of 18mm thick granite ( of any type) work ( table rubbed and polished in pillars and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust admixture of pigment to match with shade of granite over 15mm thick screed bed layer in CM (1:4) including taking down existing one complete all as specified and as directed.

Taking down chowkats/frames with shutters (without taking off shutters from the frame) etc. exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and as directed.

Taking down chowkats/frames with shutters (without taking off shutters from the frame) etc. not exceeding 1.50 Sqm each complete all as specified and as directed.

Taking down Shutters of any description exc. 1.0 Sqm and not exc. 2.0 Sqm Each and stacking at Site, complete all as specified and as directed.

Supply and fixing of 30 mm thick flush shutters, solid core construction, with block board core and comercial plywood face panels with one face is covered with decorative face veneer with lipping/frame to match all complete all as specified and as directed.

Material & labour of power coated aluminium , three track sliding window with three nos shutters made of aluminium section as per drawing no CWE/KOL/TD-33 of section no 1F-1F including necessary jointing cleats, glazing clips, rubber neoprene packing, roller, locking arrangement, handles 2 Nos , anodised aluminium snap beading screws etc. Complete all as specified. Complete all as specified and as directed. Note Nos :- (i) All window member including fitting & fixture i.e frame, track, shutter frame, etc shall be deem to included quoted rate. Only measure opening size of window. (ii) Only Glass for window & wire mesh shall be measure and paid separately under relevant items of BOQ .

Materials and labour for Mild Steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290(Gde E-165) including taking dwon old one complete all as specified and as directed.

Material and labour for Butt hinges Stainless steel 100 mm size complete all as specified and directed.

Material and labour for Aluminium anodised sliding door bolt, with hasp & staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long .complete all as specified and as directed.

Material and labour for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring of size 150 mm, fixed in floor complete all as specified and directed.

Supply and fixing of fixed type partly glazed, partly gauged. Solid PVC ventilator including 3mm thick frosted glass pane, 0.36mm dia & 1.4mm aperture stainless steel wire net, glazing clip, fastener etc complete all as specified and as directed.

Supply and fixing of Door closure hydraulically regulated, designation no 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (die cast) body complete all as specified and as directed.

Supply and fixing in repairs of figured glass with sheet glass 3 mm thick , pin head type and glazing with oil putty in squares n exc 0.5 sq. M in each pane complete all as specified and as directed.

Supply and fixing of Glazing with sheet glass 5 mm(minmum) thick ordinary quality with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fixing of sheet glass 4 mm thick ordinary quality fixed to aluminum door & window in squares in each pane of required size complete all as specified and as directed.

Supply and fixing Powder Coated Anodised aluminium frame for doors, windows, ventilators or grill with one or more rebates including joining cleat for fixing etc. Including taking down exsiting door/window fream with shutter complete all as specified and directed.

Material and labour for power coated anodised aluminium door shutters, aluminium section weighing 1.00 Kg/ m (minimum) thickness not less than 2.00 mm including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, floor hinges, anodised aluminum snap beading screws etc. Complete all as specified and as directed.

Supply and fixing of plain, aluminium sheeting Alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) and 0.71 mm thick complete all as specified and as directed.

Material & labour of power coated aluminium partition wall fixed type with frame without sash bars, aluminium section frame with 1.5 mm thick (min) including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified and as directed. Note Nos :- () The drawing of window shall be approved by the GE prior to incorporation in the work. (ii) Only Glass for door shall be measure and paid separately under relevant items of BOQ .

Material and labour for 6.00 mm thick toughened glass in square exc 0.5sqm in each pane complete all as specified and as directed.

Material and labour for Stainless steel wire cloth, 0.43 mm nominal dia of wire and avergae width of aperture 1.00 mm and fixed with stainless steel wire staples complete all as specified and directed.

Material and labour for Aluminium anodised barrel tower bolts of extruded section size 200 mm complete all as specified and directed.

Supply and fixing of end finials for drapery rod and including closed type stainless steel all brackets fixed on wall complete all as specified and directed. Make: SOFFIO-II model of VISTA or equivalent model of NOVA

Material and labour for drapery rod made of electric resistance welded MS pipe of 21mm dia having a coating of corrugated virgin PVC extrusion and cover with ABS plastic complete all as specified and directed. Make: SOFFIO-II model of VISTA or equivalent model of NOVA

Material and labour for double action floor spring hydraulically regulated made up of mini-mum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Material and labour for Aluminium handles cast type anodised 150 mm size complete all as specified and directed.

Material and labour for Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Material, labour and fixed of power coated aluminium snap grid frame work for false ceiling, size of grid 605 x 605 mm, including aluminium main/closs tee of size 35mm x 23mm x 1.5 mm ( minimum) aluminum BULBED TEES section and aluminium angle of 25mm X25mm X1.5mm thick, sutiable type GI wire hanging arrangement with adjuster all as specified in clause no 10.38 in SSR part-I and including 6 mm thick high pressure steam cured non asbestos fibre cement designer board as per IS 14862 with applying of two coats of acrylic distemper over a coat of primer including taking dwon existing false ceiling system complete all as specified and directed. Make (i) ALUMINUM SNAP GRID:- HINDALCO/ INDALCO/ JINDAL (ii) Non Asbestos Fibre Cement Board as per IS 14862:-ARMSTRONG/ SAINT GOBAIN (GYPROC)/EVEREST / VISAKA Industries Ltd

Stripping out tarfelt from old roof surfaces and removing unserviceable materials from site of work in low laying in outside MOD area complete all as specified and as directed.

Material and labour forrendering 15 mm(Avg) thick in Cement Mortar 1:4 finished even and smooth witht using extra cement after preparation of old roof surface with brushing and applied neat cement slurry with 3.0 Kg of cement per Square Metre existing surface complete all as specified and as directed

Supplying and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified in Para 11.44.5 of SSR Part I complete all as specified and as directed.

Demoltion of cement concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Material and labour for precast Reinforced Cement Concete cover slab type M-20(Nominal Mix) using 20 mm graded stone aggregate, set in Cement Mortar (1:4) complete all as specified and as directed .

Material & labour of high strength steel Fe-500 TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

Supply and fixing of 25mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors and including taking up old GI pipe complete all as specified and as directed.

Supply and fixing of 15mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors and including taking up old GI pipe complete all as specified and as directed. Note for item no 53 & 54:- All fitting & fixture such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector, holding clamp shall be provide as per site requiredment as as directed by AGE and same shall deem to be included in quoted rate.

Supply and fixing of Chlorinated Polyethylene Chloride (CPVC) pipes 20 mm outside dia , SDR 11 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings (such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector etc) fixed / laying walls, ceilings or in floors etc. With suitable size MS clamp of spacing 1.00 mtr etc pipe line including taking down existing pipe line complete all as specified and as directed. Note:- All fitting & fixture such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector,brass elbow, brass threaded adaptor , brass tee for CP bath fitting, holding clamp shall be provide as per site requiredment as as directed by AGE and same shall deem to be included in quoted rate.

Supply and fixing of 15mm bore stop valve angular type cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe for union 15mm complete all as specified and directed.

Supply and fixing in repair of bib cock cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified. Make :- Cat no PIS -08 of Prayag or equivalent model of make list as given in PS as approved by GE.

Supply and fixing in repair of stop cock , concealed type cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified. Make :- Cat no PIS -18 of Prayag or equivalent model of make list as given in PS as approved by GE.

Supply and fixing in repairof Towel Rail 600 mm long of chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. Make :- Cat no BA-40 of Prayag or equivalent model of make list as given in PS as approved by GE.

S&F for chromium plated wall mixture with arrangement for overhead shower with bend pipe complete all as specified and directed. Make :- Cat no F3002401 of CERA or equivalent model of make list as given in PS as approved by GE.

Supply and fixing in repair of 125 mm dia of shower rose with 225 mm long arms, cast copper alloy chromium plated , swivel joints and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified. Make :- Cat no BS-76 of PRAYAG or equivalent model of make list as given in PS as approved by GE.

Supply and fixing in repair of stainless steeel of 304 grade of kitchen sink with drain board of overall size 915mmx460mm and bowl size 410mm x330mmx160mm depth or equivalent made of 1mm thick stainless steel sheet with 32mm bore CP waste coupling including ball and chain 300mm long with bass cap rubber plug, 32mm bore PVC waste pipe (heavy duty) 90cm long, and bedded in cement mortar and fixed in CP cantilever brackets. Make: Cat No. 1239D of PRAYAG or equivalent make as per PS

Supply and fixing in repair of round type cockroach traps of 125 mm dia (minimum) made from Stainless steel Gr 304 complete all as specified and directed. Make :- Cat no :-FT-27 of Prayag or equivalent model of make list as given in PS as approved by GE.

Supply and fixing of Vitreous china wash down water closet (pedestal pattern) with concealed S-trap or P-Trap, white, 390 mm high, seat cover including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc and including taking down existing one complete all as specified and as directed Mak:-SLICK of HINWARE or equivalent model of make list as given in PS as approved by GE."

Supply and fixing as in repair of PVC low level flusing cistern 10 litres capacity white with ball valve & brackets with flush pipe complete all as specified and as directed. Make: CHIVAS of CERA or equivalent model of make list as given in PS as approved by GE.

Supply and fixing in repairs of Seat cover of pedestals pattern water closet of 150 kg load bearing capacity , Soft Closing Detachable UF suitable for existing pedestal complete all as specified and directed.

Supply and fixing as in repair of health faucet of ABS body with wall hook and including one metre long stainless steel braided rubber hose pipe fixed on 15 nn dia angle cock all complete complete all as specified and directed Make:- Cat No. BEA-41 Prayag equivalent model of make list as given in Approved Make list .

Supply and fixing as in repair of PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S & F vitreous china urinal, bowl type, size of 440 mm x315 mm x 265 mm omplete incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified & directed. Make: CASEY of CERA or equivalent model of make list as given in PS as approved by GE."

Supply and fixing of vitreous china wash basin white flat back, size 550 x 400 mm including CP waste coupling,with GI pipe brackets & , rag bolt in cement concrete/brick wall and including taking down existing HWB and making good wall surface complete all as specified and as directed. Make: Cat no S2040103 wash basin of CERA or equivalent model of make list as given in PS as approved by GE.

Material and labour for 9 mm thick prelaminated particle board Gde I Type I having choice lamination on both sides complete all as specified and directed.

Supply and fixing of Cast Iron nahani trap with grating 100 mm outlet incl jointing to waste pipe fixed in plain cement concrete type B1(1:2:4) using 20 mm graded stone aggregate. complete all as specified.

Plain Cement Concrete 1:3:6, type C-2 using 40 mm graded stone aggregate bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore SGSW pipe.

Material and labour for Salt glazed stoneware drain pipes 150 mm bore laid in trenches and jointed as specified.

Cutting into existing manhole for connecting new drain, making good to pipe & rendering, cutting out existing benching for and forming branch channel (half round or 3/4 section) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for 150 mm bore pipe

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out as in soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm as in soft/loose soil.

Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level n. exc. 1.50 m above the starting point.

Subtotal of Sch A part-I

SCHEDULE 'A' PART - II FOR E/M PORTION (Sl No ____ to _____ )

Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses , regulators and switch boxes etc complete and making good the disturbed surfaces complete all as specified and as directed.

Point wiring with 1.5 Sq. mm (nominal area) PVC insulated and sheathed single core FRLSH copper cable 1100 volts grade with stranded copper conductor drown through existing PVC rigid concealed conduit (heavy grade) and conduit accessories along with continuous earth wire 1.5 Sq mm PVC insulated and sheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly complete for one light/fan point controlled by one switch.

All as per item No-83 above but for one bell push point controlled by one bell push complete all as specified and as directed.

All as per item No-83 above but for one 5 amp socket independent complete all as specified and as directed.

All as per item No-83 above but 3 pin 5 amps socket out let point and 5 amps light point with the same board with other suitable complete all as specified and as directed.

Point wiring with 2.5 Sq. mm (nominal area) PVC insulated and sheathed single core FRLSHcopper cable 1100 volts grade with stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and sheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly complete for modular one socket outlet 5 pin 16 amps on independent board complete all as specified and as directed. NOTES FOR ITEM NOS 83 to 87:- Flush steel terminal box, inner plate and front plates shall be measured and paid seperately.

Material and labour for Metal flush box 3 modular complete all as specified and as directed.

Material and labour for Metal flush box 4 modular complete all as specified and as directed.

Material and labour for Metal flush box 6 modular complete all as specified and as directed.

Supply and fixing modular metal flush box 12 module complete all as specified and as directed.

Material and labour for White cover plate with frame (both ineer plate & outer plate cover) , 3 modular complete all as specified and as directed.

Material and labour for White cover plate with frame (both ineer plate & outer plate cover) , 4 modular complete all as specified and as directed.

Material and labour for White cover plate with frame (both ineer plate & outer plate cover) , 6 modular complete all as specified and as directed.

White cover plate with frame (both ineer plate & outer plate cover) , 12 modular .

Material and labour for Modular switch 6 Amp single pole one way complete all as specified and as directed.

Material and labour for Modular switch 16 Amp single pole one way complete all as specified and as directed.

Material and labour for Modular bell push complete all as specified and as directed.

Material and labour for Modular switch socket 16/6 Amp 6 pin combined shattered complete all as specified and as directed.

Material and labour for Modular socket 6 Amp 2/3 pin combined shattered complete all as specified and as directed.

Material and labour for Modular switch sockt10 Amp single pole two waycomplete all as specified and as directed.

Material and labour for Electronic type fan regulator step type 120 watt, 230 volt complete all as specified and as directed.

Material and labour for Blanking plate SP with incoming contact complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite 65x50mm three terminals complete all as specified and as directed.

Supply and fixing of LED surface/ceiling mounting(suspended from ceiling) box type light fitting 10Watt with LED Lamp , drive and made of epoxy powder coated extruded aluminium channel housing with high quality polycarbonate opal diffuser cover & high power LED’s as light source with 110 Lumen per watt (Minimum) and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up three core1.00sq. mm copper conductor flexible wire/cable complete all as specified. Make : Model No LDL-10-CDL of Crompton or equivalent model of make list as given in PS as approved by GE.

Supply , Fixing & testing of Recessed/Surface LED ceiling light fitting 36 Watt of 600mm x 600 mm with LED lamp’s & driver and made of Metallic CRCA powder coated body with UV stabilized polycarbonate cover or toughen glass cover & high power LED’s as light source with LED fitting system lumen not less than 100% Lumen per watt and electronic driver with efficiency > 85% with inbuilt protection against lightning, over voltage, short circuit and surge/spike protection upto 5 KV ensuring longer life (THD <10%, PF shall be > 0.95, colour temperature 5700±300 K), Life expectancy of LED's minimum 25,000 burning hrs, warranty of complete luminaries fitting shall not less than four years. The fitting shall be tested LM 79 & 80 and test certificate shall be submitted from original manufacture including connection complete all as specified and directeddirected. Make : Model No LCTLSNE 36 FO CDL of Crompton Greaves or equivalent model of make list as given in PS as approved by GE.

Supply and fixing of LED surface/ceiling mounting(suspended from ceiling) box type light fitting 40Watt with LED Lamp , drive and made of epoxy powder coated extruded aluminium channel housing with high quality polycarbonate opal diffuser cover & high power LED’s as light source with LED fitting system lumen not less than 95% Lumen per watt and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up three core1.00sq. mm copper conductor flexible wire/cable complete all as specified. Make : Model No CIS-305-40-57-HL2-DP-NWH of Crompton Greaves or equivalent model of make list as given in PS as approved by GE.

Supply and fixing of sub main wiring with two single core 6.0sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC conduit and accessories including one single core 6.0sqmm copper conductor cable FRLSH as earth wire and including taking out old sub-main wiring complete all as specified and as directed. NOTE:- (a) All runs of copper conductor and one run of conduit shall be measured as one run length.

Supply and fixing of sub main wiring with four single core 10.0sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC conduit and accessories accessories including two single core 10.0 sqmm copper conductor cable FRLSH as earth wire and including taking out old sub-main wiring complete all as specified and as directed. NOTE:- (a) All runs of copper conductor and one run of conduit shall be measured as one run length.

Supply and fixing of sub main wiring with two single core 4.0sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC double lock casing caping and accessories accessories including one single core 4.0 sqmm copper conductor cable FRLSH FRLSH as earth wire and including taking out old sub-main wiring complete all as specified and as directed. NOTE:- (a) All runs of copper conductor and one run of conduit shall be measured as one run length."

Supply and fixing of sheet metal enclosure for MCBs to be used singal pole & nutral double door 8 Way 200 Amps rated busbar and including fixed with 25mm x 6 mm mild steel clamp of suitable length and including taking out old DB complete all as specified and as directed.

Supply and fixing of sheet metal enclosure for MCBs to be used singal pole & nutral double door 4 Way 200 Amps rated busbar and including fixed with 25mm x 6 mm mild steel clamp of suitable length and including taking out old DB complete all as specified and as directed.

Supply and fixing of MCB SP of rating 6 to 32 Amps 240 V complete all as specified and as directed.

Supply and fixing MCB DP 40 to 63 amps 415 volts 10KA breaking capacity complete all as specified and as directed.

Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI strip 25x3mm as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 40mm dia GI medium grade earth lead protection pipe, CI frame and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternatee layer complete all as specified and directed by Engr-in-Charge.

Aluminium strip 25 x 3.15 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground.

Supply and Fixing industrial type exhust fan 240V, 300mm sweep, 900 RPM , MS body, highly efficient heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings and conforming to IS: 2312 and including aluminium louers and shutters fixed to wall and 0.75 Sqmm , 3 core PVC insulated Flexible copper cable for connection from ceiling rose to fan complete all as specified and as directed. Make: Model- TURBO HEAVY DUTY of USHA or equivalent model of Havells/ BAJAJ/CROMPTON GREAVES/ORIENT/ALMONARD as approved by GE.

Supply, Installation, testing & Commissioning of Stationary storage type electric water heater(Geyser) of capacity 25 Litres with inner tank coated with glass lined coating (Feroglass technology), with high density PUF insulation Shock resistant ABS Body, 4 in 1 multifunctional safety valve, energy efficient BEE 5 star rated and confirming to IS:2082(Part-1), IS 302-2-21 : 2011 other relevant BIS including fixing arrangement and suitable capacity flexible 3 core copper cable of 1.5 metre to 2 metre length necessary connection with and including one PVC Connection pipe of 600mm length for cold water,and one CP flexible Connection pipe of 600mm length for Hot water fixing on walls with and including all necessary fitting material i.e. mild steel Bolts (Bolted to be grouted ). Nuts, Washers etc all as specified and as directed. Make:- Model MONZA DX of HAVELLS or equivalent model of CROMPTON GREAVES/ JAQUAR / BAJAJ as approved by GE. Note:-Contractor shall submit manufactures test report as per ref BIS to GE before any payment.

Supply, Installation, testing & Commissioning of siron/sounder (hooter) conforming to IS 1941 Suitable for three phase 415 V supply with motor not extending 3.75 kw power and able to deliver 143 DB noise level complete all as specified and as directed.

Supply, Installation, testing & Commissioning of fire alarm PA system control panel complying with BS EN 54 Single loop par}el of capacity from 99 detectors and 99 modules upto 200 detector with and including 240 volts AC power supply, automatic battery charger, 24 volts, sealed lead acid maintenance free batteries sufficient for 24 hours normal working and then be capable of operating the system for 60 minutes during emergency condition complete all as specified.

Supply, Installation, testing & Commissioning of Detectors complying with and type certified to EN - 45 addressable type smoke dectector photoelectric or optical with base with self built intelligence as per IS 11360 complete all as specified and as directed.

Supply, Installation, testing & Commissioning Addressable Intelligent Manual Call Point,break galss type with alarm LED complete all as specified and as directed.

Supply and fixing of circuit wiring for fire detection and alarm system of 2 core of 1.50 Sqmm annealed copper conductor & earth/drain wire with glass mica fire resistant tape insulation cover with high performance silicone rubber insulation , electrostatic screen aluminium fire barrier & low smoke zero halogen sheath type cover 1100 volts as per BS EN 60228 and including PVC conduit and accessories complete all as specified and as directed.

Supply and fixing of Rigid non metallic IS embossed PVC conduit pipe conforming to IS-9537(Part II) including all accessories complete bore 25 mm complete all as specified and as directed.

Supply and fixing pressure fre extinguisher, ISI marked, powder type suitable for Class 'A', 'B', 'C', fire 4 kg capacity consisting of welded cylinder, squeeze discharge valve fitted with pressure indicating gauge,with discharge hose and nozzle, confirming to IS :15683:2006 duly charged with ISI marked Mono Ammonium phosphate base ABC Powder conforming to IS :14609 and 14609 pressurised with Nitrogen Gas, of Fire class rating Class 1A & 13 B complete all as specified and as directed.

Supply and installing ABC (Powder Type) Fire Extinguisher 2 Kg capacity, HP Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and confirming bracket and confirming to IS:1349-1993 complete all as specified.

Supply, Installation, testing & Commissioning of ductable type package Air conditioners of cooling capacity 7.5 Ton(TR), 415 volts, three phase, comprising of three nos (each capacity not less than 2.5 TR) hermetic Semi Hermetically sealed reciprocating or hermetically sealed scroll/recip compressors with microprocessor based control, including suitable size copper refrigerant piping with 13mm nitrile rubber insulation, electrical interconnection cable between indoor and outdoor units, PVC drain pipe (dia 15mm), remote , suitable for operation on R-22/R-407c/R-410a refrigerants nominal cooing capacity 26 KW nominal air quantity 1.42 m3/s(3000 CFM) complete all as specified and as directed.

Supply, Installation, testing & Commissioning of ductable type package Air conditioners of cooling capacity 5.00 Ton(TR) , 415 Volts, three phase , comprising of of two nos( not less than 2.5 TR each) hermetic Semi Hermetically sealed reciprocating or hermetically sealed scroll/recip compressors with microprocessor based control, including suitable size copper refrigerant piping with 13mm nitrile rubber insulation, electrical interconnection cable between indoor and outdoor units, PVC drain pipe (dia 15mm), Remote suitable for operation on R-22/R-407c/R-410a refrigerants nominal cooing capacity 17.50 KW nominal air quantity 0.94 m3/s (2000 CFM) complete all as specified and as directed. NOTES for Item No 129 & 130 :- (i) The quoted rate shall be deemed to include taking down existing AC, deposite to MES store old one, lifting, shifting, positioning at site of all the equipment, fittings, topping up of refrigerant, outdoor control panel, bracket / clamp for indoor/outdoor units installation, vibration isolators, and ancillary material as per manufacturer’s instruction. (ii)Indoor unit shall be fixed with existing duct and cost of the same shall deemed to be included in the quoted rate. Accordingly bidder/tenderer is advised to visit site before quoting his offer and nothing will be paid on this account. (iii) Refrigerant pipes upto 5 m, PVC copper conductor cable upto 5 m, with cordless remote control unit,, drain pipe upto 4 m shall deemed to be included in the quoted rate. (iv) Make:- Carrier/Daikin/Hitachi/Bluestar/Voltas/Godrej (v) In case of any specific capacity/size are not manufactured by the any above OEM, the contractor shall provide near higher capacity/size equipment by OEM without any extra cost to the department.

Supply and fixing copper refrigerant tube of 10mm Outer dia, 1.0mm(minimum) thickness as confirm to IS 10773-1995 & IS-5493-1981 with 13 mm thickness closed cell nitrile rubber tubular insulation for ductable type package Air conditioners both liquid and gas lines hard and connected to indoor and outdoor units and including fixed to wall or laid in floors/cable tray or properly supported and all required fittings etc. complete all as specified.

Supply and fixing copper refrigerant tube of 15mm Outer dia, 1.0mm(minimum) thickness as confirm to IS 10773-1995 & IS-5493-1981 with 13 mm thickness closed cell nitrile rubber tubular insulation for ductable type package Air conditioners both liquid and gas lines hard and connected to indoor and outdoor units and including fixed to wall or laid in floors/cable tray or properly supported and all required fittings etc. complete all as specified.

Supply and fixing of PVC insulated, sheathed, multicore annealed bare copper conductor 4 core, 4.00 sqmm cable, 1100 volt as per IS 694 for conceteion between indoor unit and outdoor unit complete all as specified and as directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ₹ ___________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

RADHA ENTERPRISE

KWALITY CONSTRUCTION