Repair to HL Bridge over Ghodahada PWD Road to Panada_Road_Bridge approach with SDBC and Retaing of Railing_0.000 to 2.100

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of treescut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 mtrs including removal& disposal of top organic soil not exceeding 150 mm in thickness including all labour, T and P, Cess, articles required for the work etc complete and direction of the Engineer-In-Charge.

Providing,scraping and cleaning the road surface for37.50 MM thick BUSG applying tack coat using 3.0 Kg. of bitumen for 10 Sqm and laying37.50mm thick built up spray grouting in Onelayerusing 0.45 cum of 25mm to 40mm size hard granite metal and 12.00 kg penetration grade of bitumen(80/100) for 10 sqm with 0.12 cum of 12mm size hard granite chips as key stone for 10 Sqm spreading over and laying including heating pouring and spreading over and spreading bitumen metal and chips and rolling with PRR including hire and running charges of PRR and all other machineries and including cost and conveyance bitumen, metal and chips with all

Providing and laying tack coat over the prepared surface of penetration grade of bitumen 60/70 after scrapping clearing the road surface with cost conveyance Royalty, DMF, EMF and Additional Charges T and P of bitumen and other all materials including hiire and running charges of Tar boiler and labour charges as required for the item of work etc complete including Cess as per specification and direction of Engineer-in-charge.

Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen,transporting the hot mix to work site,layingwith a hydrostatic paver finisher with sensor control to the required grade,level and alignment and rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT and H Specification for road and Bridge works (4th Revision) with cost,conveyance,Royalty, DMF, EMF and Additional Charges ,including cost of all labour,T and P and Cess required for the work complete in all respects as per direction of the Engineer-In-Charge.

Finishing wall surface two coats with any approved water proofing cement paint to outer wall surface after celaning surface including cost of paint watering curing with cost conveyance andof all materials and labour with T and P and Cessrequired for the work etc, complete in all respect as per the direction of Engineer-in-Charge.

Providing, fitting and fixing of guard posts in proper position on either sides of the bridge approach road as per MoRD specification including all cost,carriage,royalty,labour charges,T and P etc. complete as per direction of the engineer-in-charge.

Maintenance and repair of RCC railing to bring it to the original shape cleaning and repainting as per drawings and technical specification clause 1911 as per direction of Engineer in Charge.

Construction of embankment with approved material obtained from borrow ptis with all lead and lifts transporting to site by machanical means within a lead of 5Kms spreading,grading to required slope and compacting to meet requirements of table 300-2 and clause 305 of MOSRT and H specification including Royalty, DMF, EMF and Additional Charges charges and cost of all materials labour charges,machineries, T and P Cess etc required for the work complete as per direction of E.I.C