SUPPLY AND INSTALLATION OF CR LASER PRINTER

CR Laser Printer for Radiology Department Technical Specification: Print Technology: • Dry Laser Imaging- no wet chemicals required, day light- load film Image Resolution & amp; Quality: • Spatial resolution: typically 320-650 dpi (dots/pixels per inch) • Laser spot spacing: 50-78um depending on model. • Gray scale depth: 12 to 14 bit architecture to preserve diagnostic contract. Film & amp; Output Media: • Supports standard medical dry film sizes such as: 8”x10”, 10”x12”, 11”x14” and 14”x17”. • Film Loading: Daylight- load cartridges for ease of use. Throughput/Speed: • Typical output capacity: ≥60-100 films/hour depending on model and film size. • First print time can be under 60-100 seconds. Connectivity & amp; Interface: • DICOM 3.0 compliant network Interface for integration with CR/DR. • Supports printing from CR, DR. • Compatible with FCR PRIMA T2PNTM (MODEL-CR IR392). Electrical & amp; Environmental: • Power: 100-240VAC, 50/60 Hz. • Operating Temperature: Usually 5-35°C • Humidity: 20-80 % Advanced Features: • Multiple film trays (100-200 sheet capacity). • Automatic calibration & amp; self-diagnostics. Machine Warranty Period should be Three Years*