Loading…
Loading…
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
1 Jul 2026, 4:00 pmDue tomorrow
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer PWD(RandB) Division Satwari
Office of the Executive Engineer PWD(RandB) Division Satwari
Construction of main gate and boundary wall of building of divisional manager plant protection workshop and stores Udheywala Jammu
2026_PWDJK_312615_1
Short e-NIT No. 31 of 2026-27 Dated 16-06-2026
Open Tender
Civil Works
30 days
Marh
As per eNIT
2 documents required · 2 mandatory
₹600
Executive Engineer PWD(RandB) Division Satwari
₹30,000
Satwari
16 Jun 2026
16 Jun 2026
2 Jul 2026
16 Jun 2026
1 Jul 2026
16 Jun 2026
18 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m
in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and
ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as
directed: | 41.84 | cum | 256.85 | ₹10,746.6 |
| 2 | Demolishing cement concrete manually/by mechanical means including
disposal of material within 50 meters lead as per direction of Engineer-incharge:
15.2.1 1:3:6 or richer mix (i/c equivalent design mix) | 10.2 | cum | 1,725.2 | ₹17,597.04 |
| 3 | Demolishing R.C.C. work manually/by mechanical means including
stacking of steel bars and disposal of unserviceable material within 50
meters lead as per direction of Engineer-in-charge. | 2.27 | cum | 2,516.85 | ₹5,713.25 |
| 4 | Demolishing brick work manually/by mechanical means including
stacking of serviceable material and disposal of unserviceable material
within 50 meters lead as per direction of Engineer-in-charge: In cement mortar | 7.65 | cum | 1,458.45 | ₹11,157.14 |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | 24.37 | cum | 5,202.9 | ₹1,26,794.67 |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) | 9.3 | cum | 7,788.4 | ₹72,432.12 |
| 7 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,
buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and
struts upto floor five level including curing but excluding cost of centering shuttering,
finishing and reinforcement.
5.2.1 DELETED
5.2.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) | 4.46 | cum | 9,395.7 | ₹41,904.82 |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,
landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral
stair cases upto five level including curing but excluding the cost of centring, shuttering,
finishing and reinforcement with
5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) | 1.02 | cum | 9,821.85 | ₹10,018.29 |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
position and binding all complete upto plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more. | 1,847.92 | kg | 123.2 | ₹2,27,663.74 |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes
etc.) trusses etc., including cutting , hoisting , fixing in position and
applying a priming coat of approved steel primer, including welding and
bolted with special shaped washers etc. complete.
10.16.1 Hot finished welded type tubes | 576 | kg | 156.95 | ₹90,403.2 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.04 MB
BOQ_1011883.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid