REPAIR PAINTING TO CERTAIN STEEL FURNITURE UNDER GE MIS MHOW

Amount

(A) Removal of following existing unserviceable steel components of various MES F/DB/FD/TP/MAP furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueing, providing hinges,denting, placing everypart in-tact , as applicable as per drgs (B) Work shall be executed wherever the furniture exists in different User Units of GE (MIS) Mhow including BSO's Furniture Yard and as directed by Engineer-in-Charge

Almirah Large Steel : FD-67/1031/ FD/E6/MAP/18

Removing of unserviceable lock without damaging the adjacent parts of almirah large steel and S&F new brass lever lock of size 65 mm with duplicate keys to almirah large steel (Make : Godrej/Hetich/Harrison/LICO/Rina/Nova) 6 lever complete all as directed and as shown in drawing.

Removing of old unserviceable handle without damaging the adjacent parts of almirah large steel and S & F new steel CP handle 125 mm long of approved quality all as specified and directed

Taking out unserviceable broken legs from Almirah large steel and S&F new legs made out of 1 mm thick MS sheet duly painted suitable for Almirah large steel including necessay welding as required complete all as directed and as shown on drawing.

Repairs to door as specified including Taking out unserviceable hinges and S&F new hinges of required size as per drawing and making doors fiunctionable in all respects

Repairing the existing shelf including welding/Adjustment/fixing of the existing loose shelves by providing new clamps, cleats, screws etc complete all as directed

Taking out unserviceable shutters/Covers and S&F almirah large steel new shutters/covers made out of 1mm thick MS sheet including repairing three way locking system complte all as per drawing and fixed with suitable size of MS Screws including painting complete all as directed.

Taking out old unserviceable/damaged shelves of almirah large steel and S&F new shelves duly painted made out of 1mm thick MS sheet bent to required shape and fixing the same properly in position complete all as directed

Almirah Medium / Small Steel : FD-67/104/114/115/243/1032/1034

Removing of unserviceable lock without damaging the adjacent parts of almirah medium steel and S&F new brass lever lock of size 65 mm with duplicate keys to almirah medium steel (Make : Godrej/Hetich/Harrison/LICO/Rina/Nova) 6 lever complete all as directed and as shown in drawing.

Removing of old unserviceable handle without damaging the adjacent parts of almirah medium steel and S & F new steel CP handle 125 mm long of approved quality all as specified and directed

Taking out unserviceable broken legs from Almirah medium steel and S&F new legs made out of 1 mm thick MS sheet duly painted suitable for Almirah medium steel including necessay welding as required complete all as directed and as shown on drawing.

Repairs to door as specified including Taking out unserviceable hinges and S&F new hinges of required size as per drawing and making doors fiunctionable in all respects

Welding works wherever required as directed by Engineer-in-Incharge

Repairing the existing shelf including welding/Adjustment/fixing of the existing loose shelves by providing new clamps, cleats, screws etc complete all as directed

Taking out old unserviceable/damaged shelves of almirah medium steel and S&F new shelves duly painted made out of 1mm thick MS sheet bent to required shape and fixing the same properly in position complete all as directed

Locker Steel : FD-1029/257

Removing old unserviceable broken handle from locker bed side steel without damaging adjacent parts of locker bed side steel and S&F new CP steel handle 100 mm long of approved quality complete all as specified and directed

Removing old unserviceable hasp and staple without damaging the adjacent parts of locker bed side steel and S&F new hasp and staple chromiun plated of suitable size complete all as specified and directed

Repairs to door as specified including Taking out unserviceable hinges and S&F new hinges of required size as per drawing and making doors fiunctionable in all respects

Removing of unserviceable lock without damaging the adjacent parts of locker steel and S&F new brass lever lock of size 65 mm with duplicate keys to almirah medium steel (Make : Godrej/Hetich/Harrison/LICO/Rina/Nova) 6 lever complete all as directed and as shown in drawing.

Taking out unserviceable broken legs from locker bed side steel and S&F new legs made out of 1 mm thick MS sheet duly painted suitable to locker bed side steel including necessay welding as required complete all as directed and as shown on drawing.

Taking out unserviceable conduit pipe and S&F new CP conduit pipe 20 mm dia of 1.6 mm thick as per drawing.

Removing unserviceable locking device and S&F new locking device of 10 mm dia including MS Rod and brass shackles duly painted complete with fixing accessories duly painted complete all as shown in the drawing and as specified and directed

Welding works wherever required as directed by Engineer-in-Incharge

Teapoy Varandah : FD-35/208/383/255

Removing of unserviceable shoe and S & F new hard rubber shoe as per drawing

Removing old broken top and S&F new top of suitable size made of 18/19 mm thick Post forming top (PFT) exterior grade ( Make-Century/Greenply/Action tesa) ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing white lamination on other side with standard PVC edging all around and headless nails all round the edges all as specified and directed

Removing 20 mm thick MS bar and S&F new 20 mm thick MS bar welded to each leg and one centre stiffner provided including weldging works wherever required complete as directed by EIC

Table Bed Side : FD/E6/MAP/15 (R) / FD/MAP/07

Removing of old handle of lower drawer and S&F new handle of lower drawer all as specified and as shown in the drawing

Removing old side of table bed side and S&F new side of suitable size made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa)) ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing white lamination on other side complete all as specified and directed

Removing of old top of table bed side and S&F new 18mm thick Post forming top(PFT) exterior grade ( Make-Century/Greenply/Action tesa) provided on top of the table complete all as specifed and as shown in the drawing.

Removing old top drawer of table bed side and S&F new top drawer of suitable size made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing white lamination on other side and in front side with 12mm BWR grade plywood conform to IS 303 (Make: Greenply/Century/Archidply) including provision of the telescopic channel of suitable size of approved quality, and 6mm BWR plywood (Make: Greenply/Century/Archidply) as bottom along with Chromium Plated handles with all as specified and directed

Removing of old PVC rubber shoe and S&F new PVC shoe of superior quality all as specified

Removing of old leg of table bedside and S&F new leg made of 18 mm MS Square pipe 18 guage thick black colour powder coated all as specifed and and as shown in the drawing

Table Office Officer Steel : FD-84/ 1003/1002

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing duly painted and as specifed and as shown in drawing

Removing the existing unserviceable lock of table office officer steel and S&F new lock (Make : Godrej/Hetich/Harrison/Lico/Rina) 5 lever of suitable size with duplicate keys complete all as specified and directed

Repairs to drawer/shutter all as specified including necessary tinkering /denting, welding as required and taking out unserviceable hinges S&F new hinges of suitable size as per drawing all as specified and as shown in drawing

Removing the existing unserviceable stiffener of table office officer steel and S&F new stiffener made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing duly painted and as specifed and as shown in drawing

Removing of old PVC rubber shoe and S&F new PVC shoe of superior quality all as specified and as directed

Welding the joints of legs / square tube wherever required as per direction of Engineer-in-Charge

Removing old broken top of table office officer steel and S&F new table top of suitable size made of 18mm thick Post forming top(PFT) exterior grade ( Make-Century/Greenply/Action tesa) ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing white lamination on other side with fevicol and headless nails all round the edges all as specified and directed by Engineer-in-Charge.

Table 3x2 with and w/o drawer : FD-1007/1008

Welding wherever required as per direction of Engineer-in-Charge

Removing old broken top and S&F new table top of suitable size made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing white lamination on other side with standard pvc edging and headless nails all round the edges all as specified and directed

Repairs to Drawer including necessary tinkering /denting, painting, welding, etc.complete all as specified and as shown in drawing

Removing of old PVC rubber shoe and S&F new PVC shoe of superior quality all as specified and as directed

Removing the existing unserviceable locks of table 3'X2' and S&F new lock (Make : Godrej/Hetich/Harrison/Lico/Rina/Nova) 5 lever of suitable size with duplicate keys complete all as specified and directed

Charpoy IP Hard Top : FD/MAP-II/01, FD/MAP/04

Removing old top and S&F plywood (Make: Greenply/Century/Archidply) top of suitable size 12mm thick BWR Grade ISI Marked confirming to IS-303 for Charpoy with Hard top as per existing shape and size with and including 8 Nos shunken nut/bolts by making appropriate hole made with electric drilling machine complete all per drawing and as directed

Removing of old PVC rubber shoe and S&F new PVC shoe of superior quality all as specified and as directed

Welding the joints of legs / square tube wherever required as per direction of Engineer-in-Charge

Bed Hard Officer : FD/E6/MAP/8(R) & HFD-2001

Removing old top and S&F new top with plywood (Make: Greenply/Century/Archidply) 12mm thick BWR Grade ISI Marked confirming to IS-303 for Bed plywood (Make: Greenply/Century/Archidply) made to shape & size as shown on drawings, with and including 8 Nos shunken nut/bolts by making appropriate hole made with electric drilling machine complete all per drawing and as directed

Removing of old PVC rubber shoe and S&F new PVC shoe of superior quality all as specified and as directed

Removing old particle board of head rest / foot rest and S&F new head rest / foot rest made of 18/19 mm thick Prelaminated MDF Board exterior grade I (Make: Green Ply /Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I with PVC Beading complete all as directed and shown on drawing.

Chair Writing Steel : FD-360

Removing old broken seat and back and S&F new seat and back of suitable size as per existing along with synthetic foam of 28 density fixed over a wooden frame and covered with leathered rexine of high quality all as specified and as directed by Engineer-in-charge

Taking out old damaged/decayed Arms rest and S&F new Arm of size 60X25 mm rest made of first class teak wood complete all as per drawing

Removing of old PVC rubber shoe and S&F new PVC shoe of superior quality all as specified and as directed

Rack steel Adj 3/6 tier : FD-106/129/1038

Welding wherever required as per direction of Engineer-in-Charge

Repairs to shelves including necessary tinkering ,denting, welding, etc. all as specified & as directed by Engineer-in-charge

Book case steel : FD-90/1028

Removing old glass pane and S&F new glass pane 3 mm thick (Make: Modiguard/Atul/Saint gobain) all as specifed and as shown in drawing

Removing old stainless steel handle and S&F new Stainless handle all as specified and as shown in drawing

Repairs to shelves / door including necessary tinkering /denting, welding, etc. all as specified and as directed by Engineer-in-charge

Removing the existing unserviceable locks of Book case steel and S&F new lock (Make : Godrej/Hetich/Harrison/Lico/Rina/Nova/Kodia) of suitable lever and suitable size with duplicate keys complete all as specified and directed

Chair Verandah : FD-19,256,259 FD-359/FD/MAP-II/15, FD/MAP-II/06, FD/MAP/12, FD/MAP/11

Removing the existing unserviceable legs and S&F new Leg made of MS conduit pipe 16guage , 19mm dia including painting with two coats of synthetic white enamel paint over a coat of red oxide primer all as per drawing .

Welding joints of leg of 19/20mm MS tube and other joints as per drawing as directed by Engineer-in-charge

Removing of old PVC rubber shoe and S&F new PVC shoe of superior quality all as specified and as directed

M&L for preparation of old painted iron & steel surfaces of chair verandah by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting two coats of synthetic enamel paint(1st grade quality) over a coat of red oxide primer complete after preparation of surface all as specified and as directed by Engineer-in Charge and Re- -canning of Chair Verandah with oval shape 4mm wide new plastic cane including removing old unserviceable cane and rest all as shown on drawing and as directed by the Engineer -in- Charge.

Provision of Stiffner of size 12 mm square pipe 18 guage x 16" with appropriate MS plate welded below the seat of chair for extra support to seat complete all as directed

Removing of old PVC seat and S&F 4 mm thick new PVC sheet (Make:- Classic,Amko,cello,comfo/Harmony) of Chair Verandah complete all as shown on drawing and as directed

Chair writing : FD/E6/MAP/10, FD/E6/MAP/10(R) & FD/E6/MAP/12

Removing the existing old seat and back & re-upholestering with new fabric containing material like Acrylic polyester, poly viscose, poly propylene of colour ( range not less than 300/RM) as approved by GE and PU foam of 50 mm thick and 50 density with PVC lipping all round fixed over 12 mm hot pressed BWR plywood complete all as specified in drawing

Removing the existing broken/ unserviceable handle from the chair and S&F new handle made out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original all as specified on drawing and as directed

Preparation of old painted surface by scraping & rubbing and applying one coat of synthetic enamel paint (black) to MS tubular frame of chair writing steel.

Taking out unserviceable /broken frame and S&F new frame as per drawing duly painted as per drawing and as directed

M & L for removing old/worn out rubber stopper and S & F new Rubber stopper of superior quality of suitable size complete all as specified and as directed

Chair computer : FD/E6/MAP/01

Removing the existing old unserviceable seat and back from the chair and re-upholestering with new fabric containing material like Acrylic polyester, poly viscose, poly propylene of colour as approved by GE and PU foam of 50 mm 50 density fixed over 12 mm BWR plywood with PVC lipping all around all as specified on drawing and as directed. (Fabric shall be not less than Rs 350 per meter)

Removing the existing broken/ unserviceable arm rest from the chair and S&F new handle made out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original all as specified on drawing and as directed .

Removing the existing unserviceable Gas lifting Hydraulic System of various types from the Chair. Supply and fix new maintenance free, environmental friendly, chrome free cylinder tube fixed in a M.S. black powder coated with outer central column tube 38 mm dia and 2 mm thick having 100 mm storke length with gas pressure of 300 n force Gas lifting Hydraulic System to the chair in suitable pattern/model to match in original all as specified on drawing and as directed by Engineer in Charge.

Removing the existing unserviceable or broken castor wheel and S&F New Castor wheel to the chair in suitable pattern/model to match the original all as specified on drawing and as directed

M & L for welding to broken steel frame of Chair computer

Removing the existing unserviceable or worn out bottom base from the Chair s upply and fix new Base to the chair in suitable pattern/model to match the original all as specified on drawing and as directed

Table computer : FD/E6/MAP/03

Removing old broken top and S&F new table Top of suitable size 18mm thick Post forming top (PFT) exterior grade ( Make-Century/Greenply/Action tesa) ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing white lamination on other side with fevicol duly polish with a coat of high glossy french polish complete and headless nails all round the edges all as specified and directed shall be provided on top of table complete and rest all as per drawing

Removing of old broken drawer with telescopic channel from existing table computer and providing new drawer 75mm deep made of 18mm thick pre-laminated MDF board bonded with phenol fomaldehyde synthetic resin, exterior grade I, one side with approved shade and balancing with lamination on other side alongwith Telescopic channel of required shape and size complete all as directed.

Removing of old broken key board tray with telescopic channels from existing computer table and providing new key board tray of 18mm thick pre-laminated MDF board bonded with phenol fomaldehyde synthetic resin, exterior grade I, one side with approved shade and balancing with lamination on other side with and including teak wood beading of 4mm x 18mm size fixed with Fevicol and Panel Pin and duly finished with a coat of high glossy french polish matching to existing surfaces alongwith Telescopic channel of required shape and size complete all as directed.

Removing of old broken mouse tray with telescopic channel from existing table computer and providing new mouse tray made of 18mm thick pre-laminated MDF board bonded with phenol fomaldehyde synthetic resin, exterior grade I , one side with approved shade and balancing with including teak wood beading of 4mm x 18mm size fixed with Fevicol and Panel Pin and duly fnished with a coat of high glossy french polish matching to existing surfaces lamination on other side alongwith Telescopic channel of required shape and size complete all as directed.

Removing old side /partion and S&F new Side/partition made of 18/19 mm thick prelaminated MDF Board (Make : Greenlam/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I,Type-I of shade as approved by GE.

M&L for preparation of old painted iron & steel surfaces of table computer by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting with two coas of synthetic enamel paint(1st grade quality) over a coat of red oxide primer including preparation of surface complete all as specified and directed

Table Office Clerk Steel : FD-84/1004

Removing old broken top of table office clerk steel and S&F new table Top of suitable size made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa/) ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing white lamination on other side with standerd PVC edging/wooden edging all around and headless nails all round the edges all as specified and as per drawing

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

Repairs to Drawer including necessary tinkering/denting, painting, welding, etc complete .all as per drawing and as specified

Removing unserviceable locks of drawer and S&F lock (Make : Godrej/Hetich/Harrison/Lico/Rina/Nova/Kodia) 5 lever with duplicate keys as per drawing .

Removing of unserviceable shoe and S & F new hard rubber shoe as per drawing

M & L for welding to broken steel frame of table office clerk steel wherever required as per dirction of y Engineer-in-charge.

Chair CBA Special with hand rest : FD-120(M)(R)

Taking down old unserviceable cane of seat and back and Re- -canning of seat and back of Chair CBA special with handrest with oval shape 2 mm wide new plastic cane of make as approved by GE and rest all as shown on drawing and as directed

Removing old unserviceable wooden plank and S&F new hand rest made of 12 mm thick 1st class teak wood all as specified and shown on drawing .

Taking down old unserviceable shoe and S & F new hard rubber shoe superior quality fixed to leg of chairCBA special with hand rest complete all as specified and directed.

Chair school with hand board : FD/E6/MAP/05

Removing old unserviceable seat/back of Chair and S&F one piece PVC Seat and back virgin quality as approved by GE all as specified and shown on drawing.

Removing old unserviceable hand board of Chair and S&F new hand board top openable fixed on right hand side made of 18/19 mm thick Prelaminated MDF Board exterior grade (make: Greenply/century/action tesa) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with standard PVC edging/wooden edging as specified and shown on drawing.

Removing of unserviceable shoe and S & F new hard rubber shoe as per drawing

M & L for welding to broken steel frame of Chair School with Hand Board wherever required as per dirction of y Engineer-in-charge.

Chair Steel Tubular with arms : FD-75(M)

Taking out old damaged/decayed seat & back of chair CB steel with Arms and S&F new seats and back of shisham wood duly shaped and finished alround duly canned with 2mm wide and 0.4 mm thick half round and border with 3 mm wide plastic cane of half round in true Godrej pattern complete with two coats of required shade of paint over a coat of wood primer all as specified and shown on drawing .

Taking out old damaged/decayed Arms rest and S&F new Arm rest made of good quality wood complete all as per drawing.

Taking out old unserviceable shoe from its position and S&F new top shoe best quality fixed in the same position complete all as specified and directed.

Taking out old unserviceable top cap from its position and S&F new top cap best quality fixed in the same position complete all as specified and directed.

S&F flat iron 25mmx5mm thick , 50 cm long to steel frame below seat to support of wooden seat duly welded and painted to steel frame complete all as specified and directed.

M&L for welding to damaged/decayed steel frames of chair CB Steel with Arms complete all as specified and directed.

M&L for painting to steel frame of old painted surface by derusting/scrubbing/dusting/scraping & rubbing and applying one coat of synthetic enamel paint to MS tubular frame of chair steel tubular with arms

M&L for painting with one coat of synthetic enamel paint of contrast colour / Hammertone finish or approved shade as directed both internally & externally through spray gun machine to the following furniture articles including preparation of surfaces as required of MES pattern viz FD/DB/MAP series or Similar items including removing of dents, applying putty to level the surface before painting, all as specified and shown on drawing and directed by Engineer-in-Charge. Note: Work shall be executed wherever the furniture exists in different User Units/Md accns of GE(MIS) Mhow including BSO's Furniture Yard and as directed by Engineer-in-Charge

Almirah Steel Medium : FD-67/104/114/115/243/1032/1034

Almirah Steel Large : FD-67 / 1031, FD/E6/MAP/18

Book case steel : FD-90/1028

Charpoy IP Hard Top : FD/MAP-II/01, FD/MAP/04

Bed Hard Officers FD/E6/MAP/08(R)

ladder for loft : FD-44/238/403

Locker Steel : FD-1029/257

Rack steel Adj 6 tier : FD-106/129/1038

Rack shoe steel : FD/E6/MAP/02(R)

Table office officer steel : FD-84/1002/1003

Teapoy Varandah : FD-35/208/255/383

Table 3x2 with and w/o drawer : FD-1007/1008

FMN Set for charpoy : FD-220(R)

Table Bed Side : FD/E6/MAP/15(R) /FD/MAP/07/FD-157

Chair writing steel : FD-360

Table office clerk steel : FD-84/1004

Chair CBA Special with hand rest : FD-120(M)(R)

Chair school with hand board : FD/E6/MAP/05

Chair CBA with arms : FD-475(M)

M/S JAI BALAJI TRADERS (BID ID -3093252)

Archana Construction (BID ID -3093423)