REPAIR OF WALL PLASTER FLOORING TILING JONERY ROOF SHEET AND OTHER ALLIED WORKS IN DIFFERENT MES OFFICES INSTALLATIONS STATIONERY DEPOT UNDER AGE BR I OF GE NORTH MEERUT CANTT

Amount

Taking down old existing water proofing treatment from the top of RCC/ arch slab, includingtaking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish of the premises complete all as specified and as directed.

M&L for nominal mix concretes 1:2:4 type B-O (using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Surface Preparation: The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of PCC shall be done with wire brushing to attain smooth leveled surface. Cracks shall be rectified, filled using dual shrinkage compensated Repair Mortar and dried for 72 hours before laying the liquid applied membrane. (a) Grout: Providing Chemical injection treatment in the form of pressure grouting to the construction joint and cracked portion at 1m c/c by injecting cement slurry mixed with dual shrinkage compensated cementations grout Injection grout additive, in the required consistency through the pre fixed PVC nozzles in the 18 mm dia holes, fixing of PVC nozzles with instant setting cement. Angle fillets/Coving: Providing and making of fillet, 50mm x 50mm on sharp corner of terrace with cement sand polymer mortar (add “multipurpose mortar”, 10% by weightofcement). First apply the bonding coat of Multi-Purpose Polymer 5-10% diluted in water and add to cement slurry. Apply the bonding slurry and apply the polymer mortar over the sharp edges. Note: Grouting will be done when and where ever required.

(b) Treatment of pipe entry points: Preparing the inside surface of core and PVC /MS Pipe by roughening using suitable Sand paper to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Packing the gap using free flow able non shrink cement polymer based grout up to the surface of the bore while the bonding agent is in tacky state. the periphery of PVC pipe should be sealed with Hybrid PU Sealant or dual shrinkage compensated Micro concrete . Note: Will be done when and where ever required

(c) Application of Asian Paints two component Epoxy Primer (Resin & Hardener) on the cleaned surface for bonding of Polyurethane with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3(Resin:Hardner) Supplying, providing and applying waterproofing treatment to Podium area with single component highly elastomeric seamless cold applied modified PU coating complete as per manufacturer’s specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have a dual combination of 280% elongation. Material coverage 1.2kg /sq.mt complete all as specified and as directed. (Note:- Contractor is required to deposit the material covered in this item up to 100% CA quantity to the Engr-in-Charge, within 15 days of issue of work order No 1

Demolition of brick work or rubbled stone masonry includinguding all quoins arches , pillars etc built in cement mortar and includinguding removal from the site complete all as specified and as directed.

M&L for Brickwork with fly ash bricks old size bricks straight or curved on plan exceeding 6m mean radius built in Cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. includinguding raking out joints, hacking for key, scrubbing down with water, etc and includinguding removal of debris and rubbish from the site complete all as specified and as directed.

M&L rendering 15 mm thick in cement mortar 1:4 on brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M & L for applying 15mm thick rendering using ready mix plaster bags in cement mortar 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 200ml per 50 kg weight of cement consumed or as per manufacturer instructions, complete all as specified and as directed. Note : - (i) Water proofing compound shall be measured and paid seperately as "supply only" under respective item of this schedule. (ii) Contractor is required to deposit ready mix mortar bags for 100% CA quantity to the office of Engr-in-Charge within 15 days of issue of work Order No 1.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M & L Preparation of new plastered surface of wall by applying 3mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm)using roller for painting complete all as specified and as directed.

M&L Preparation of new plastered surface of wall by applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over and including one coat of primer using roller for painting complete all as specified and as directed.

M&L Preparation of new plastered surface of ceiling and applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over and including one coat of primer using roller for painting complete all as specified and as directed.

M&L complete removal of existing treatment by mechanical means including preparation of old plaster surface of ceiling and applying two coat of oil emulsion distemper over and including one coat of primer using roller for painting complete all as specified and as directed.

M&L Complete removal of existing treatment by mechanical means including preparation of old plastered surface of wall and applying 3mm thick wall care putty and one coat of primer and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified and as directed.

M&L Complete removal of existing treatment by mechanical means including preparation of old plastered surface of wall by applying 3mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 Ltr/10 Sqm over and includinguding priming coat of exterior primer applied @ 2.20 kg/10 Sqm)using roller for painting complete all as specified and as directed.

M&L Preparing old Plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and as directed.

M&L Preparing old Plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L Preparing old Plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L Preparation of old painted wooden and wood base surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismantling structural / framed steel work of any description as in purlin, rafter, grills, grating & doors etc. complete all as specified and as directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includinguding distance pieces, cleats etc includinguding notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (includinguding rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and as directed.

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work includinguding necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and as directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self drilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions complete all as specified and as directed.

S&F in repair pre-painted galvalume aluminium zinc coating plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified and as directed.

M&L for preparation of old steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exceeding 1.5 Sqm but not exceeding. 4 Sqm each, complete all as specified and as directed. Note :- Rate also includinguding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exceeding 1.5 Sqm each, complete all as specified and as directed. Note :- Rate also includinguding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down shutters of any description exceeding 1 but n exceeding 2 Sqm each, includinguding builders hard ware fittings complete all as specified and as directed.

M&L for Anodised aluminium Powder Coating (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates includinguding joining cleat for fixing etc. complete all as specified and as directed.

M&L for aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) sliding window and ventilator shutters, sliding (Three) type without sash bars, aluminium sections weighing 0.55 kg/m includinguding necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium and Sliding Arrangement Complete fittings as required complete all as specified and as directed.

M&L for Anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) door Shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m includinguding necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium Complete fittings as required complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames includinguding punching or drilling out old glazed pins / spring clip and rubbish off the premises complete all as specified and as directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in square not exceeding. 0.5 Sqm in each pane complete all as specified and as directed.

M&L hardcore using broken brick of gauge exceeding 63mm but not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolled / rammed to a true surface complete all as specified and directed

S&F in repair galvanised mild steel stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples includinguding necessary beadings complete all as specified and as directed.

S&F in repair Double action floor spring, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty and fixed complete all as specified and as directed.

S&F in repair, mortice lock, brass, four lever, vertical type, size 75mm complete all as specified and as directed.

S&F in repair hasp & staples 125mm in size, safety type aluminium anodised fixed with screws complete all as specified and as directed.

S&F in repair Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet includingusive of solvent cement and fixing at site on PVC frame with 5mm PVC fillet as per specifications and drawing shown on page No 180 of SSR Part-II complete all as specified and as directed.

S&F in repair plastic seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white flat back, size 580x450mm including waste pipe , chromium plated waste coupling 32mm dia , bracket etc complete all as specified and as directed.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete complete all as specified and as directed.

S&F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Molded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65X100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ stainless steel dash fasteners of required dia and length complete all as specified and as directed Note :- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S&F Glazed and Skelton shutters 30 mm thick second class hard wood, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing wire mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a) complete all as specified and as directed.

S&F 100 mm butt hinges, medium weight Brass complete all as specified and as directed.

S&F Brass barrel tower bolt 200 mm, extruded section complete all as specified and as directed.

S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed. complete all as specified and as directed.

S & F for 125mm Extruded brass handles, fabricated type polished complete all as specified and as directed.

S&F in repairs aluminiun (die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed. complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, supplying & fixing in the frame at site as per specification & drawing oin relevant section of SSR Part-II complete all as specified and as directed.

M&L for Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

S&F in repair,100 mm butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

S&F in repair, aluminium handle cast type anodised 125 mm long complete all as specified and as directed.

S&F in repair, aluminium anodised barrel tower bolt 150 mm, extruded section complete all as specified and as directed.

S&F in repair, Mild steel springs for doors, 150 mm, ordinary rat tail rod pattern springs includinguding roller and roller plate complete all as specified and as directed.

S&F in repair, aluminium anodised barrel tower bolt 200 mm, extruded section complete all as specified and as directed.

S&F in repair, aluminium anodised sliding door bolts with hasp and staple extruded section or cast aluminium alloy 300 mm long complete all as specified and as directed.

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L Non-skid colored ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors set & jointed in neat cement slurry and pointed in white or colored cement to match the color / shade of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (includinguding 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tiles and laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L vitrified tiles 10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour laid of tiles and over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L glazed ceramic coloured tiles of size 350X250X7mm/450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L rounding to edges of stone slabs two edge full round, such as in steps,cooking platform and other similar situation complete all as specified and as directed.

M&L 18/19mm thick Solid WPC board, exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to WPC frame work in cup boards, rebated or flat edged fancy handle , Magnate lock including dismantling old wall or ceiling board complete all as specified and as directed.

S&F in repair continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and as directed.

Supplying, hoisting and fixing in position any colour rotational molded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltr capacity including dismantling old unserviceable PVC tank complete all as specified and as directed.

Supplying, hoisting and fixing in position any colour rotational molded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltr capacity including dismantling old unserviceable PVC tank complete all as specified and as directed.

S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms complete all as specified and as directed.

S&F in repairs gun metal globe or gate valves, 15mm bore dia, with iron wheel head, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and as directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and wall including taking down old unserviceable pipe complete all as specified and as directed.

M&L cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceedingeeding 10 cm width or girth, complete all as specified and as directed.

S&F in repairs 15mm brass chromium plated bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm brass chromium plated angle valve with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs stop valves, 15mm bore dia, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repairs brass chromium plated wall mixer for mixing Hot & Cold water high pressure, screwed down for 15mm bore iron pipe complete all as specified and as directed

S&F in repair 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot and cold water screwed , fixing and connection to pipes complete all as specified and as directed. Make Cera Cat Part No F-1017401, Pearl Cat Part No ARI-015, Hindware Cat Part No. F740022

S&F in repair PVC connection 15 mm size with PTMT nuts 450 mm long complete all as specified and as directed

S&F in repair PVC Bath cabinet with mirror 18"x22"x4.25" complete all as specified and as directed.

S&F in repairs, chromium plated towel rack of size 24" complete all as specified and as directed.

S&F in repair vitreous china ware EWC combined pattern complete with internal fittings complete all as specified and as directed.

S&F in repair Chromium Plated Health Faucet brass body with wall hook and one meter stainless steel braided rubber hose pipe complete all as specified and as directed

S&F in repair super special colors vitreous china wash hand basin white flat back, size 580x430mm includinguding waster pipe , chromium plated waste coupling 32mm dia , with pedestal / bracket etc complete all as specified and as directed.

S&F in repair stainless steel fancy type curtain rod, 20mm dia fixed with bracket, including taking down of old curtain rods complete all as specified and as directed

S&F in repair Toilet paper holder of brass chromium plated conforming to the samples kept in the office of AGE B/R-I complete all as specified and as directed

S&F in repair Towel ring 200 mm dia chromium plated fancy type conforming to the sample kept in the office of AGE B/R-I complete all as specified and as directed

S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen with plugs, CP waste coupling, waste pipe and including fixing in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm. complete all as specified and as directed

S&F in repair, 1mm thick, stainless steel plate rack of size 1200mm x 900mm x 180mm complete all as specified and as directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed

S&F in repair Sheet glass shelf assembly consisting of 3 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed

S&F in repairs brass chromium plated soap dish complete all as specified and as directed.

S&F in repair 125 mm size brass chormium plated shower rose including fixing to steel pipe or union complete all as specified and as directed

Dismantling of cast iron PVC or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required for 110mm and 75mm bore of pipe complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls includinguding stack clamp complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laying as in floor and complete all as specified and as directed.

S&F in repair PVC (SWR) junction single, (Single T) equal or unequal provided with access door 110mm bore complete all as specified and as directed

S&F in repair PVC (SWR) bends 110mm bore any radius. complete all as specified and as directed

S&F in repair PVC (SWR) floor trap, 110mm bore, plain with grating includinguding jointing with solvent cement complete all as specified and as directed

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slab/ blankets, any thickness includinguding aluminium snap grid complete all as specified and as directed.

M&L 4mm thick Non asbestos fiber cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed

S&F in repair Anodised aluminium snap grid frame work frame work for false ceiling complete all as specified and as directed

Taking down aluminium windows (with frame & shutters) for servicing by tightening loose fittings & aluminium sections by tightening existing screws or providing new screws/aluminium cleats of appropriate size, cleaning, greasing/oiling (where required), easing & making functional and refixing in same opening complete all as specified and as directed

S&F in repair, vitreous china wash down water closet pan (Pedestal pattern), white with 'p' or 's' trap (exceeding flushing cistern and flush pipe), includinguding connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia 300mm long for wash hand basin area with brackets complete all as specified and as directed.

S&F in repair pillar tap cast copper alloy fixed in repair with capstan head chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shank and fly nut fancy type 15mm bore complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and as directed Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

M&L cement concrete 1:4:8, type D2(40mm graded stone aggregate) as in 75mm thick sub base complete all as specified and as directed

M&L for chequered cement concrete colour tiles glossy finish size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry laid over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed

M&L for 18 -20mm thick BLACK/RED (LAKHA) granite factory made bull nosed, polished (table rubbed and polished) as in jambs, wall, window cills, cooking platform and the like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing laid over and including 10 mm thick rendering in cement mortar 1:4 alongwith rounding of edges, making hole for gas pipe complete all as specified and as directed.

M&L Providing and fixing 10mm thick plaster of paris sunk or raised moulding ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately complete all as specified and as directed.

S&F in repair Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and includinguding ceiling section (not exceeding 1.2 m length) of 0.55mm thickness having kurledweb of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

High Tech Metal India

Manglam Engineers and Construction Co

M/S A B CONSTRUCTION

Shri Kanchan Engineers

Shikha Enterprises

AEGIS INTERNATIONAL

SA construction co.

veer enterprises