TCMC - Renovation Work for Existing of LGP Crematorium at Arulmurugan Nagar in Ward No.19 Tambaram City Municipal Corporation Zone II

Supply and fixing of High Pressure Tube Burner made of Heat Resistant Stainless Steel

Supply and Fixing of Manifold Suitable For 6 Nos of cylinders Connection

Supply and Fixing of Non-Return Valve For the LPG Cylinders

Supply of High Pressure Hoses to connect Between the Regulator and Manifold

Supply and Fixing of Regulator suitable for LPG Cylinders

Supply and Fixing of High presure LPG Diaphram valve

Supply and Fixing of 3 Nos High Pressure Leak proof stainless Steel Shut of Valves

Supply and Fixing of High Pressure Leak proof Brass flow control Butterfly type Needle Valves

Design, Supply & Construction of Cremation Chamber having the inner dimensions of 940mm x 1150mm x 2350mm and Outer Dimention will be 1700mm X 2800mm X 1950mm fabricated out of heavy duty material & provided with necessary openings for gasous fuel firing through burners and feeding body. The Primary Chamber shall be constructed with 4 Layers inner most will be 115mm IS-8 quality fire bricks (Andra Make only ) 2nd layer will be 115mm Hot face Insulation Bricks Rajestan Make 3rd layer will be75mm Cold face Insulation brick 4th layer will be 25mm Ceramic Fiber provission to with stand temperature and insulation bricks to ensure minimum heat loss. The furnace shall have Ash collection chamber with door size of 300mm X 350mm & provision for periodic ash removal. The furnace shall have ceramic tiles finishing on the outer side. The front side of furnace will be covered by moving MS fabricated door lined with Ceramic Fiber for Insulation. Door operation will be the Manual.

Design Supply and Construction of Seconadary Chamber for the Re-Incineration Flue Gas having the inner Sixe of 400mmX1800mmX400mm. The Secondary Chamber shall be constructed with 4 Layers inner most will be 115mm IS-8 quality fire bricks (Andra Make only ) 2nd layer will be 115mm Hot face Insulation Bricks Rajestan Make 3rd layer will be75mm Cold face Insulation brick 4th layer will be 25mm Ceramic Fiber to with stand temperature and insulation bricks to ensure minimum heat loss. High Alumina Fire Bricks backked with insulation bricks and the outter sixe of 1200mmX1800mmX700mm and the Providing of Flue Gas Entry and Outlet

Duct Line From Cremation Chamber to Scrubbing Unit with Insulating of Refractory Cement The Outer Duct will be Made out of Mild Steel and the Inner will be Lined with Refractory Cement with the thickness of 50mm.the Outer Dia will be 400mm.

Supply, Delivery and fixing of Centrifugal Fan should be the 5 HP Motor of suitable rating for Sucking of Fumes from the Furnce and letout to the Chimney in terms of Volumetric Flow Rate & Pressure Head development. The Impeller Should be the Stainless Steel SS-304 Grade and the Casing should be the Mild Steel 4mm thickness.The MoC shall be MS/SS as dictated by the Incinerator System operation.

Duct Line From Scrubber to ID Fan Blower and ID Fan Blower and to the Chimney. The Duct will be Made out of Mild Steel construction with Flanges of 280mm to 325mm Dia.

Supply and Fixing of 2HP High Presure Pump for the Scrubbing System with Water Line Connections to the Scrubbing unit and Drain connections to the Tank

Double Stage High Pressure venturi Wet Scrubber for entrainment of particulate matters, removal of soluble emissions and sudden quench the emissions, fabricated out of mild steel. The emissions enter in to the scrubber having high-pressure water spray, there by entrained particulate matter is washed down with water with the removal of soluble emissions and also helping in the reduction of the Emission temperature. This system is provided without built RCC/masonry water storage cum circulation Tank. Necessary powerful centrifugal Pump for Circulation of water will be provided with Pipeline

Supply and Fixing of 2HP and 5HP Starters with Wiring for the Blower motor and Scrubber Pump

Servicing of Human Body Charging Trolley with Wheel Alignment for the free movement

Painting of 100 feet chimney with Red and white/ Heat Resisting Aluminium Paint including Cost and Labour Charges etc,..

Chimney: This is a Cylindrical type MS IS 2062 quality, 8MM Plate Chimney With two coasted of aluminium Heat Paint Exrernally, 7000 Resistance mm, Long Bottom Cylindrical Chimney. It is Rested on 16mm type MS IS 2062 Qyality| (100 feet Thick Base Flange and Stool Flange 16mm Thick| with 12mm Gusset Support, Cylindrical Chimney Mounted| on foundation 12nos x 25mm Dia Bolt, Nut Joints, Top 1 Cylindrical Shell Boiler Quality 8mm Plate x 7000mm long| base chimney. It is Rested 50mm width base Flange & wind forece curtain MS Flat Set, with Lightening arrestor 25mmx 3mm copper flat earthing, with easy hinges type manual opened manhole door, necessary for pollution control board monitoringm sample ports arrangment| ladder assembly with safety guard set 70 feet full height, one sets of detachable platform, over all size: 800mm Dia x 400mm Dia x 21000mm length with necessary all arrangements etc., complete