COMPREHENSIVE REPAIRS to CTW MCEME UNDER GE MCEME SECUNDERABAD

Amount

Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles all as specified and as directed by Engineer -in-Charge.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed by Engineer -in-Charge.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed by Engineer -in-Charge.

M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified as directed by Engineer -in-Charge.

M&L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes and as directed

M&L for rendering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc and as directed

M&L for 20 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes.

M & L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments and as directed

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above GL) and as directed

M&L for 75 mm thick Cement concrete type D4, 1:4:8 (40mm graded aggregate)as in sub base and as directed

M&L for 50 mm sand filling under floors or in foundations including watering and consolidation spread, rolled and consolidated to gradient and camber required and as directed

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment and as directed

Dismantling Stone slabs and tiles laid dry and pointed of any description or thickness in floors, aprons etc all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete and as directed

M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc completed all as specified and as directed .

M&L for 20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for pillars and etc all as specified and directed by Engineer in charge.

Taking down chowkhats of frames with shutter without taking taking off shutters from the frames not exc. 1.5 sqm and as directed

Taking down chowkhats of frames with shutter without taking taking off shutters from the frames n. exc 1.5 sqm but not exc. 04 sqm and as directed

Taking down Shutters and Resecuring or easing & adjusting, and fixing the same opening of any description exc 1 sq. m and n exc 2 sq. m each and as directed

Taking down Shutters of any description exc 02 sq.m each complete all as specified and as directed

M&L for Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engr-in-Charge.

M & L 2nd class Hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded on chamfered put together with glue pinned at joints and as directed

S&F 125x60mm pressed steel frames for door with one or more rebates including necessary fixing lugs,hinges ,lock ,strike plate etc and as directed

S&F 2nd class hard wood 35 mm thick, plain, framed, panelled shutter ( any number of panels) with panels of timber flat on both sides ( feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, the sizes of members of shutters shall be specified and as directed by Engineer-in-Charge

S&F 35 mm thick IInd class hard wood Glazed and skeleton shutters, for door open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutter as specified in SSR Part-I, Sec-8, Clause 8.24 a and fixed to chowkhats complete all as specified and directed.

S&F butt hinges medium weight, cold rolled mild steel 100mm long and as directed

S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 and as directed

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section

S&F aluminium handles 150mm long fabricated type anodised all as directed

S&F 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate fixing to door frame with welding or any means complete all as specifid and directed by Engineer in charge.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fix clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed and as directed

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and directed.

Demolition of brick work of any description and in any position not otherwise specifically provided for complete all as specified.

M&L for brickwork with fly ash old size bricks straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified

Taking down cement plaster or cement lime plaster of any description including racking out joints and hacking for key and scrubbing down with water etc and as directed

M&L for rendering 15 mm thick in concrete surfaces of walls set in CM 1:6 finished even smooth without using extra cement complete all as specified

M&L for rendering 15 mm thick on fair faces of brick work in CM 1:4 finished even and smooth with using water proofing compound @3% without using extra cement complete all as directed. (Note : WPC will be measured separately) ( ht up to 12 m) and as directed

Supplying only Integral waterproofing compound

M&L for applying two coats of OBD over two coat of wall care putty over a coat of alkali resistant primer including preparing the new plastered wall surfaces complete all as directed

M&L for preparation of two coat of cement base paint over a coat of alkali resistant primer on newely plastered surfaces of walls complete all as directed

M&L for as in repairs powder coated GI snap grid frame work (size of grid 605x605mm) with 35x25x1mm main tee and 25x25x1mm, cross tee and wall angle for false ceiling and suspended with 4mm dia GI wire, hooked to roof with needful adjustement up to 1200mm long by means of ceiling cleats made out of GI Flat and expansion holdfasteners 12.5mm dia 40mm long complete all as per manufacturers instructions specified and as directed.

S&F in repairs PVC laminated designed (both faces) gypsum board 600 X 600 X 6mm thick decorative type fixed in aluminium frame work with screws or nails etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs,10 litre capacity, low level PVC flushing cistern, syphonic action type white colour with in let ball valve float and handle, PVC flush pipe, brackets etc complete all as specified and as directed by Engr-in-charge

S&F in repairs Bib tap, cast copper alloy, 15mm dia long body with crutch or butterfly handle screwed down for iron pipes complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs gun metal globe or gate valve, 20mm dia, screwed down high pressure with iron wheel head, screwed both ends for iron pipes or for union complete all as specified and as directed by Engr-in-Charge

S&F in repair vitreous china EWC white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs Fancy type chromium plated 15mm bore 2 in 1 bib cock, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and as directed

S&F in repairs vitreous china Orissa pattern squatting pan 580 x 440mm with integeral foot rests including P or S trap, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Wash basin vitruous china 550 X 440mm long white colour flat back incuding and MS brackets, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15mm bore Fancy type pillar taps, long shank (swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixedand as directed

S&F in repairs Fancy type chromium plated 15mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unionsand as directed

S&F in repair PVC waste pipe, 40mm dia for sink/urinal etc, complete all as specified and as directed by Engr-in-Charge.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples etc.complete all as specified and as directed by Engineer-in-charge.

S&F in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples etc.complete all as specified and as directed by Engineer-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads (ht up to 15 m)

S&F plain sheet glass ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane 3 mm thick plain glass on new or old windows complete all as specified and directed by Engineer-in-Charge.

All as per Sl Item No. 59 above but 3.00 mm thick figured glass and as directed

S&F steel windows /ventilator with side hung shutters including projecting type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded and ht up to 12.0 m all as specified and directed by Engineer in charge

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L 100 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) hard standing finished even and smooth without using extra cement. With spike rolling to to surface or maing impressed of expanded metaland as directed

Dismantling of 1000 ltr water storage tanks and removed to store complete all as specified.

Dismantling of 500 ltr water storage tanks and removed to store complete all as specified.

S & F 1000 ltr capacity of rotational moulded PVC water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including float valve complete all as specified and directed.

S & F 500 ltr capacity of rotational moulded PVC water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including float valve complete all as specified and directed.

Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F mild steel articles such as hold fasts conforming to IS-2062 and grade E-165 (Fe-290), including riveting/or welding and fixing with screws, bolts, etc. complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer -in-Charge.

Repairs to aluminium door such as removing hinges, tower bolt , handle and adjusting to door ht , repair to door floor spring/ hydroulic door closer , repair /replacing aluminium beading , cleats etc complete all as specified by Engineer in charge.

S&F in repair Boarding in Floors and Skirting 25 mm thick second class hard wood Planed one side, with butt joints and fixed with nails to existing floors in patches, including cutting out, piecing, heading joints etc complete all as specified and directed.

S&F PVC (SWR) 100/110mm bore single socketed pipes in any length with rubber ring joints fixed to wall with pvc clamps including taking down old pipes, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F PVC (SWR) bend/shoe for 100/110mm dia, etc complete all as specificed and as per directed by Engineer-in-Charge.

S&F PVC (SWR) 75mm dia single socketed pipe including jointing with solvent cement including taking down old pipes, etc complete all as specificed and as per directed by Engineer-in-Charge.

S & F for PVC (SWR) 75 mm bends complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125 mm size with or without swivel joints , any size including fixing to steel pipe or union, etc complete all as specificed and as per directed by Engineer-in-Charge.

S & F Anodised aluminium frame (Powder Coated) for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Anodised aluminium door shutters (Powder Coated), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S &F of Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each panel of thickness 5.5 mm and as directed

S & F door closer hydraulically regulated of Aluminium(die cast body), designation No.3 universal type suitable for door shutters of 851 to 1200 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S & F Aluminium Mortice lock, vertical type, size 100 mm, long 4 levers with handles complete all as specified and directed.

S &F Prelaminated particle board of thickness 18/19 mm, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame and as directed

NEWS CONSTRUCTIONS (BID ID -3318932)

VACON INFRASTRUCTURES (BID ID -3318892)

Vara Enterprises (BID ID -3326779)

ATUL ENTERPRISES (BID ID -3318174)

PARDEEP AND CO (BID ID -3326650)

KIRAN CONSTRUCTIONS (BID ID -3315134)

abhilasha constructions (BID ID -3325734)

Squad 7 Projects and Services Pvt Ltd (BID ID -3321784)