Providing and insulation of 2Ton EOT crane

Following work is to be carried out For CTR Victoria Park Meerut. Modification on RCC pillar for installation of MS Girdar for equal height with RCC/ MS Work etc

Fabrication of Gantry Girder with following & uplifting with the help of Hydera Crane/ other suitable means for fixing of Gantry Garder with cutting work & welding work & alignment work . (a) MS Beam Size 350mm*140 mm*9 Meter (b MS Angle 65*65*6 mm-9 Meter (c) MS Plate 600mm*300mm*8mm*2 Nos

Supply & Errection of Electric wire Rope Hoist with following details including transportation, cabling work etc., (a) Capacity- 2.0 M/Tonnes, (b) Model-B4-8S. (c) Height of Lift-6 Meter. (d) Duty-Class-II as per IS:3938. (e) Electric Motors-Crane duty, TEFC squirrel-cage induction motors as per IS:325, 150starts per hour with class F insulation & IP:55 protection operating on A.C.3 phase,50 Hz, main power supply at 415 volts, +-10%, (Bharat Bijlee/ Crompton Greaves make). (i) Hoisting Motor: 2.00 HP/ 4 Pole, (ii) Cross Travel Motor : 0.50 HP/ 4 Pole (f) Operating speed (i) Hoisting speed : 25 Meters/ Minute, (ii) Cross Travel speed: 15.0 Meter/ Minute (g) Hoist Brake : The hoisting motor shall be coupled to fail safe, AC Electro-Magnetic Disc type brakes to arrest movement of the hoist in any working position as soon as power supply is either cut or switched-off. (h) Wire Rope : tested qulity, un-galvanized steel wire rope of 6x36 or 6x37 consction with fibber-hemp core shell be used (size 8mm/4-falls for 2.0 M/T capacity) (i) Controls : From ground level through pendant push-buttens station suspended from hoist having control voltage of 110 Volt for safety of operator. (j) Gears : All gears shall be of spur/helicl-type Precision Machine hopped from tested quality alloy steel duly housed in a totally enclosed dust & vermin proff oil-bath lubricated gearboxes. The travelling wheels of the hoist sheel be open spur geared teething type. (k) Other safety features : Contactors & over load relays of L&T/ Siemens make, Electrical terminals of "Connectwell/ Elemex " make, Snap-action type limit switch of "PC" make to prevent over-hoisting/lowering of the block byond operting limits. C-Seres MCB of L&T/Siemens make shall be provided in place of commonly used HRC fuses. (L) Trailing cables : Consisting of festooning type PVC insuletes copper cables suspended from cable trolleys running on wire rope

Fabrication of Hut type roof of MS/ Fiber Sheet for protection of Electric wire rope hoist 20 Feet * 5 Feet including MS Frame of MS Angle/ Pipe.

Painting of Girdar, Roof type Hut etc, with one coat of red oxide primer & two Coat of enameled paint of yellow/ suitable color.

M/S SHREE JEE ENTERPRISES

M/s JAI BALAJI ENTERPRISES