Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st lowest₹71.4 CrAccepted-AOC BLDG NO 03 SF 3 SF 4 TECHNO CIDADE CHOGM ROAD ALTO PORVORIM BARDEZ GOA | NORTH GOA | GOA | 403524 | ₹71.4 Cr | 1st lowest | Accepted-AOC work order issued |
| 2 | Rejected-Technical 112 KALIAMMAN KOIL STREET NATESAN NAGAR VIRUGAMBAKKAM CHENNAI 600092 | CHENNAI | TAMIL NADU | 600092 | - | - | Rejected-Technical Ineligible |
Tender Value
₹64.9 Cr
EMD Value
₹74.9 L
Closing Date
9 Apr 2025, 3:00 pmClosed
Executive Engineer
4th Floor Paryatan Bhavan Patto Panaji Goa
Development of Chhatrapati Shivaji Maharaj Museum at Farmagudi in Ponda Goa under the Special Assistance to State for Capital Investment SASCI Scheme
2025_GTDCL_20380_1
GTDC/PC/EE(S)/2024-25/e-62
Open Tender
Civil Works
365 days
4th Floor Paryatan Bhavan Patto Panaji Goa
Please refer Tender documents.
17 documents required · 17 mandatory
₹30,000
₹74.9 L
4th Floor Paryatan Bhavan Patto Panaji Goa
18 Jun 2025
1 Mar 2025
10 Apr 2025
1 Mar 2025
9 Apr 2025
2 Apr 2025
1 Mar 2025 - 15 Mar 2025
17 Mar 2025
Amount
CIVIL WORKS
Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area
Felling trees of girth(measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads Beyond 30 cm and upto 60 cm grith
Earth work in excavation over areas of all type of strata comprising of any type of material such as soil ,silt,clay, sand, saturated soil, gravel, murum of all varieties, shingles, pebbles, all type of congolmerates,latrite rock,soft rock,ordinary rock, disintegrated rock,fissured/shattered rock, decomposed rock, weathered rock and all such material either in full or part as the case may be adopting any method/ methods as may be convenient or permitted (blasting prohibited) including dressing of side ramming bottom, all leads and lifts, getting out excavated soil & stacking as directed , pumping and bailing out water, barricading,danger lighting, guarding as directed. chiselling ,wedging,etc., in all conditions such as dry , moist, foul, saturated, submerged, etc., as directed by the Engineer etc., all complete
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge
Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete.b) Moorum
Disposal of unserviceable material such as building rubbish, wood, earth, debris etc. for all leads and lifts upto 20Km
Brick work using common burnt building bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 40 kg/ cm2 b)..In superstructure upto floor five level.
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. Extra for flat semi-circular or segmental arch works .
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. Extra For Labour In Well Lining Cornices Coping, Etc
Exposed decorative laterite masonry using Patradevi stone of size as specified and laid as directed by architect in cement mortar 1:4 (1 cement : 4 coarse sand)
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level.
Providing and laying Autoclave Aerated cement blocks masonry (Light Weight Foam Concrete Blocks) with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: a) All works upto plinth level
Centering and shuttering including struttings, propping etc. and removal of formwork for :a) Foundations, footings, bases for columns and mass concrete.
Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.d.) Moulding as in cornices, window sills etc. exceeding 15 cm in girth.
Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.e.) Moulding in cornices, window sills etc. not exceeding 15 cm girth.
Providing & laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size).
Applying a coat of hot bitumen (maxphalt 80/100 or equivalent) using 1.5 kg/sq.m. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth light soaked in bitumen
Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.
Centering & shuttering including Strutting, Propping & removal of forms for :i) Foundations, Footings, Bases for columns
Centering & shuttering including Strutting, Propping & removal of forms for :ii) Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like
Centering & shuttering including Strutting, Propping & removal of forms for iii) :Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan)
Centering & shuttering including Strutting, Propping & removal of forms for :iv)Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth
Centering & shuttering including Strutting, Propping & removal of forms for ::vi)Staircases (except spiral staircases) excluding landing
Centering & shuttering including Strutting, Propping & removal of forms for :x) Domes, vaults, shell roofs having curved surface in both the directions.
Centering & shuttering including Strutting, Propping & removal of forms for :xiii)Suspended floors, roofs landings, shelves & their supports
Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
Providing and laying in position machine batched concrete (BMC)/ Ready mixed concrete (RMC) machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in charge. All works upto floor V level. M-30grade of concrete
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.)
Supplying and fixing Pre-cast cement concrete kerb stones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. a)Size 30 cm L x 50 cm H x 15 cm T
Supplying and fixing of Precast RCC slabs(factory made, the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge.b.)Size 900 x 400 x 100 mm with steel reinforcement not less than 5.0 kgs per unit -12 T capacity
Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. a)First class Indian teak wood
Providing and fixing Single Leaf Flush Door 38mm thk good quality commercial grade block board factory finish flush door with approved Veneer 4mm thk with Melamine Polish on both side, edges to be covered in 6 mm lipping patti, with Dorma locks, 24" handle, Concealed hydraulic door closer, palladium hinges &profile thumb turn cylinder with keyhole, ss brush finish door stopper, aldrop, tower bolt,handles) & other required accessories. all exposed wood to be polished in melamine polish as per architects instructions. Basic price of Veneer @ Rs.100/ per sqft. The material rates including Material, Labour, Transporation and Accessories etc.All material shall be of approved make. All work complete as per the drawing specification and direction of the engineer.
Providing and fixing Single Leaf Flush Door 38mm thk good quality commercial grade block board factory finish flush door with approved Laminate 1mm thk on both side, edges to be covered in 6 mm lipping patti, also put 6" SS Skirting in bottom on inside with Dorma locks, 12" handle, Concealed hydraulic door closer, palladium hinges &profile thumb turn cylinder with keyhole,ss brush finish door stopper,aldrop,tower bolt,handles) other required accessories. all exposed wood to be polished in melamine polish as per architects instructions. Basic price of Laminate @ Rs.50/ per sqft.All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and fixing Double Leaf Flush Door 38mm thk good quality commercial grade block board factory finish flush door with approved Veneer 4mm thk with Melamine Polish on both side, edges to be covered in 6 mm lipping patti, with Dorma locks, 12" handle, Concealed hydraulic door closer, palladium hinges & profile thumb turn cylinder with keyhole,ss brush finish door stopper,aldrop,tower bolt,handles) & other required accessories. all exposed wood to be polished in melamine polish as per architects instructions. Basic price of Veneer @ Rs.100/ per sqft. All material shall be of approved make.The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and fixing in position solid Shaft Flush door BWP grade quality, 40 mm thick, Including 50mm x 6mm T.W. lipping as per drawing and all exposed surfaces 4mm thk HDF sheet to be finished with approved shade of asian paint. also 75mm X 40mm Ply framed and fixed in position with hold fast lugs of required dia & length,Dorma concealed Handle, All hardware including Hinges with LnKey lock, as per design drawings and door schedule as directed. etc complete. All material of approved brand .The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and fixing of Hollow metal fire rated doors as per IS 3614 part-1 & part-2 for stability and integrity. Door frame shall be double rebate profile of size 143 x 57 mm made out of 1.60mm (16gauge) minimum thick galvanized steel sheet. Frames shall be Mitered and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers should be provided on the striking jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening. Door leaf shall be 46mm thick fully flush double skin door. Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. 2Hrs Fire Rated Door of size : 1200 x 2300 mm with hardware set as follows: Ball bearing butt hinge 4" x 3" x3 mm in SSS Mortice sash lock 50mm BS, 20mm sq for end strip, SSS 1" 6 pin EP cyl. L=70mm both side keys in SNP (1 each) Tubular lever handle with roses and esc. SSS (1 each) Door closer spring size 3 with standard arm. Rates should include of Panic bar handle and all necessary hardwares (lock, handle, hinges etc)of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and Fixing of Double Leaf Glass Door system, for provision of 12mm thk clear toughened glass door shutter fittings including the cost of top & bottom patch fitting, over panel patch, panel connector pivot, over panel/sidepanel connector with pivot, bottom lock, stainless steel hardware fittings of 316 grade for operating door i.e. door handle 450mm Lg, floor spring of approved make and locking arrangement etc. complete including the cost of cutting the floor and making good the same, as per design and drawing all complete as required. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing & making of the 125mm thk Acoustical Door in Salwood frame of 75x37.5mm all around both side and intermediate frame of 50x37.5mm at 600mm c/c in both direction, keep 50 mm thk 1000 gsm density Mikron in beetween frame both side with 5mm thk 10kg/m2 Tec sound & one layer of 12.5mm thk plain gypsum in between the frame. Door shall be finished with 12 mm thk marine ply both side with 1.5 mm thk Laminate as per Architect All the edges of the door shall be finished with T.W lapping putty asper detail. Door shall have a drop down D-Seal DP160-Athmer seal profile and 'O' seal rubber lining on threeside of the frame rebate as per design,drawings and acoustic consultant instruction complete and also included making good the wall if any damage due to this work. Accesories - Brass Handle and Lock case, HINGES - 150 x 50 x 6mm stainless steel Hinges 4no's per shutter. DOOR CLOSER - IR – LCN - 3133 Concealed heavy-duty door closer, 1 no per shutter.,hold open type door closer.(Dorma or Equivalent). All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
The Maratha style wooden window arch (size: 1000mm x 2400mm) shall consist of a handcrafted wooden frame with intricately designed arches, featuring traditional Maratha architectural elements. The frame will be constructed using high-quality seasoned teak or similar durable hardwood, ensuring strength and aesthetic appeal. The window arch will include a decorative arch design, with the top portion rounded or pointed as per the design specifications. The wooden members will be finished with polish or varnish to enhance the natural wood grain and provide weather resistance. The window will be fitted with a set of high-quality metal hinges and locking mechanisms for security, with the glazing to be single or double as per requirement. The design will also incorporate wooden mullions, transoms, and a suitable weatherproofing system to ensure proper sealing and insulation. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including anodized aluminium butt hinges with necessary screws. Including bright finished brass tower bolts (barrel type) with screws, bright finished brass handles with necessary screws, bright finished brass hard drawn hooks and eyes etc complete
Providing and fixing Glazed Partition 10mm thick toughened glass partitions of required high embed in the floor, via a chased gap and 10mm x 12mm aluminum U profile channel fitted in the floor, the glass hall be held together on the top via a 12mm x 50mm thick plywood frame and 50mm thick removable beading finished in paint/ laminate as per specification. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Supply and installation of 12mm thk toughned glass, railing system including 316 grade stainless steel posts, brackets, handrails, and all necessary fittings. The system shall comply with safety standards and be installed securely with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor as per design specifications. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and fixing partition with 12mm thick three layered flat pressed veneer teak wood particle board with both faces teak veneer bonded with phenol formaldehyde synthetic resin including C.T.W. vertical 70 x 70 mm and top and bottom rail of 70 x 35 mm and covering battern of 20 x 10 mm at 1.00 metre apart on both ways or as directed including finishing with one coat of primer complete. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing & Fixing in position, Acoustical Panelling made from Fabric wrapped Compressed polyester fibre nonwoven 9 mm panels on, 50 x 50 mm sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. Including all materials labour, finishing etc. complete. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and Fixing 450mm deep BWP Grade 19 mm thk plywood shutter finished with approved shade of 1mm thk laminate externally & internally finished with approved shade of 0.8 laminate. wardrobe top, sides, verticals made out of BWP Grade 19mm thk plywood finished with approved shade of 0.8mm thk laminte internally. drawer made of BWP Grade19mm thk plywood finished with approved shade of 1mm thk laminte, inside finished with approved shade of 0.8mm thk laminate. back of the wardrobe BWP Grade. The units shall be provided with first quality hardware such as hinges, stoppers, soft close blum motion drawer channel, etc. of approved make complete as per instructions given by the architect. Basic rate of external laminate is Rs 55/-psf. Basic rate of internal laminate-40/- psf All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and fixing wooden raised stage using high-quality plywood (minimum 18mm thickness) for the platform, supported by timber framing (minimum 50mm x 50mm hardwood - grid will be 600mm x 600mm) at regular intervals for stability. The stage shall be raised to a height of [specify height] meters and finished with a non-slip, smooth, and durable surface for performance. The edges of the stage shall be rounded and protected with metal trim for safety. The structure must be securely anchored to the floor with the required accessories and designed to withstand live performances with a load-bearing capacity of [specify load capacity]. The stage shall be modular and easy to assemble/disassemble with all necessary hardware included for installation. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Supplying and installing a 450mm deep display unit with storage, constructed from 18mm BWP GRADE plywood, featuring shelves of 35mm thick with 10mm toughened glass shutters and PVC edge binding on both the inside and outside. The unit is equipped with soft-closing telescopic channels and a lock provision. The external surface is finished with 1mm laminate Please follow the respected drawing for information regarding item. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and installing a sleek, modern 10mm thick toughened glass display counter to showcase artifact, featuring a sturdy, minimalist frame with tempered glass or acrylic panels. The counter should have a large, clear viewing area to provide an unobstructed view of the artifacts from multiple angles. Dimensions should be tailored to fit the specific display, with a typical size range of 4-6 feet in length, 2-3 feet in width, and 3-4 feet in height. The glass or acrylic surface should be scratch-resistant, easy to clean, and provide minimal glare or reflections . All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing & fixing 12 mm thick & 100 mm wide pelmet with 25 mm diameter, wooden curtain rod and bracket including fixing within 25 x 3 mm flat 10 cm long and plugs etc. complete.a)First class Indian teak wood
Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws. b. Ornamental grill
Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint.a) In R.S. joists, channels, angles, tees
Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in charge: Adjustable louvered windows. Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. with 12 Compartments , Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
A Mild Steel (MS) Slotted Angle Rack in a powder-coated finish is typically made from mild steel angles with pre-drilled slots for easy assembly and adjustment. The rack features a durable powder-coated finish, which provides corrosion resistance and a smooth, aesthetically pleasing surface. It is available in various sizes, with rack heights ranging from 6 to 8 feet, widths from 3 to 5 feet, and depths from 1 to 2 feet. Shelves can be customized with metal, wire, or wooden surfaces, and the design supports adjustable shelf heights, allowing flexibility for different storage needs. Typically, these racks can hold between 50-100 kg per shelf, depending on the design, and they are ideal for warehouse shelving, industrial storage, and commercial applications. The modular, bolt-and-nut assembly makes installation easy, and the powder-coated finish enhances durability and resistance to scratches, fading, and corrosion. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Supply, fabrication, and finishing of a hexagonal table frame made from premium-grade 18mm thk plywood, with a height of 750mm. The frame should include all required hardware such as screws, brackets, and connectors for sturdy assembly. The surface must be sanded and finished with a protective coating (e.g., laminate, veneer, or paint) for durability and aesthetics. The design must ensure stability, balance, and ease of assembly, adhering to quality standards. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Marble tiles in risers of steps, skirtings, dado, walls and pillars laid on 12 mm (average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing complete with Kotah stone slab flooring over 20 mm (average thick base of lime mortar 1:1:1 (1 lime putty : 1 surkhi : 1 coarse sand) laid .a)Plain white makrana marble slab 25 mm thick
Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) .a)20 mm thick.
b) Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete
Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge
Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20mm (average) thick base of cement Mortar 1:4 (1 cement:4 coarse ) using :a)white Makrana Marble.
Providing and fixing Kota stone tread tiles 35mm thick in single piece with rounded of nosing antiskid groove laid on and including 20mm (average ) thk bed of cement slurry including pointing with pigmented cement slurry to match the shade of the slab, cleaning etc. complete.
Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.
Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. c)Wall Ceramic Glazed Tiles : 300 x 600
Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm.d) 80 mm thick in grey colour (M40 grade)
Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete.d.)600 x 600 mm - light Shades
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm a)Jet Black
Crazy ceramic tile flooring (China Mosaic flooring), with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 kg per 50 kg of cement, all complete as per direction of Engineer-in-charge.
Providing & Laying 300X300X160mm Thick Decorative Laterite Stone Flooring (Patradevi Stone) Laid On 20mm Thick Base Sand Bed Inculding Maintaining 20mm Gap Between Two Stone & To Be Filled With Cement Mortar 1:4 ( 1 cement :4 coarse sand )With Colour Pigment To Match With Laterite Flooring All Work Completed As Per Directed By Engineer-In-Charge. All material shall be of approved make. The material rates including Material, Labour, Transporation . All work complete as per the drawing specification and direction of the engineer.
Supplying and Fixing Laterite Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc. in linear as well as curvilinear portions of the wall/building all complete of cladding Laterite stone of size 6"x 12"x 19mm thickness or as specfied by Engineer in charge with material Silica sand, Cement, admixtures, Colour pigments, including scaffolding, etc.complete. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Supplying and Fixing Basalt Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc in linear as well as curvilinear portions of the wall/building all complete. of cladding Laterite stone of size 6"x 12"x 19mm thickness or as specfied by Engineer in charge with material Silica sand, Cement, admixtures, Colour pigments, including scaffolding, etc.complete. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications
Providing and laying 1st class mangalore tile roof covering with 25 x 50mm (1” x 2”) jamba wood or similar batten including nails etc. but excluding rafters.
Providing and fixing 13mm thick wooden planks ceiling (frame work for base to be paid separately) with M.S. screws a)Second class indian teak wood
Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.
Gypliner or equivalent ceiling which includes providing & fixing G.I. HG angle of sie 0.55 mm thick having two equal flanges of 25 mm each screw fixed to brick wall / partition with the help of nylon sleeves & screws at 610 mm c/c. Then suspending chan 12.5 mm tapered edge Gypboard (confirming to IS:2095-1982) is then fixed to channel section with 25 mm drywall screws at 230 mm centre. Screw fixing is done mechanically with drill machine and suitable attachment. Finally square and tapered edges joints of the boards are jointed and finished so as to have flush look which includes filling finishing with jointing compound, joint paper tape and two coats of Drywall top coat suitable for Gypboard (as per recomended practices of India Gypsum Limited).
Providing and laying integral cement based treatment (Box type) for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer and consisting of : i) Ist layer of 20 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer using rough Shahbad/Kotah stone.
Providing and laying integral cement based treatment (Box type) for water proofing on the vertical surface by fixing specified stone slab 20 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer using rough Shahbad/Kotah stone.
Providing and fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main "T" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet, spaced 1200mm center to center, and cross "T" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm, resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings, fixture, smoke detectors etc., wherever required. Main "T" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia and 50mm long dash fastners, level clips of size 85x30x0.8mm, spaced at 1200mm center to center along main "T" bottom exposed with 24mm of T-section shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.
Providing And Fixing Octagonal Mdf Pattern Ceiling (450mm X 450mm) Includes The Supply And Installation Of Mdf Ceiling Tiles With A Hexagonal Design, Each Tile Measuring 450Mm X 450Mm, Cut And Finished To Fit The Ceiling Layout. The Tiles Shall Be Of High-Quality, Moisture-Resistant Mdf, Primed And Painted With A Suitable Finish To Match The Interior Decor. The Ceiling Tiles Must Be Installed In A Grid System WithProviding and fixing 16 gauge 50 x 50 mm aluminium frame 600 to 600 c/c both direction, suspended with MS/G.I Hangers from Roof with Precise Alignment, Ensuring Clean Joints And Seamless Integration With The Surrounding Ceiling Elements. All Necessary Accessories, Including Scaffolding Suspension Grid, Fasteners, And Adhesives, Are To Be Provided And Installed According To Architects instruction. For A Durable And Aesthetically Pleasing Ceiling including cost of required Cut-Outs, decorative mouldings / finishing-items. The Work Also Includes The Removal And Disposal Of Any Debris, Ensuring A Clean And Tidy Site Upon Completion.
Providing & Fixing in position, Acoustical Ceiling made from Rigitone 8/18 perforated panels on approved heavy duty G.I. frame, ceiling channels at 300 c to c, & intermediate channels not more than 1200 c to c, suspended with MS/G.I Hangers from slab, in front of 1000 Gsm synthetic wool 50 mm thick, with Paint, including cost of required Cut-Outs, decorative mouldings / finishing-items & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete
Providing and fixing Hilux board Ceiling, The system shall comprise of following Frame work - Providing and fixing 16 gauge 50 x 38 mm aluminium frame for outer periphery and framing of false ceiling @ 600 mm c/c both direction suspended with MS/G.I Hangers from slab. Screw fixing is done mechanically with drilling machine with suitable attachment. Finally tapered edges of the Hilux board are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound, paper tape etc. Rate to be included all kinds of profiles and cut outs required for light fixtures, Speakers, Smoke detector, trap doors and AC grill in the ceiling.
12mm cement plaster 1:3 (1 cement : 3 fine sand)
6mm Cement Plaster to Ceiling 1:3 (1 Cement : 3 fine Sand)
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. Extra for plastering done on mouldings, cornices, or arch it raves including neat finish to line and level.a)In one coat
Applying one coat of cement primer of approved brand and manufacture on wall surface.
Finishing wall with waterproofing cement paint of approved brand and manufacture and of required shade on new work (three or more coats) to give an even shade.
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.
Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical as approved by Archaeological Survey of India/ Engineer, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil), on the exposed laterite masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer. (The rate is inclusive of all materials & labours).
Melamine polishing on wood work (one or more coat) b.)Matt
Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50mts. lead.
Dismantling steelwork in built up sections in angles, tees, flats and channels including all gusset plates bolts, nuts, cutting dismembering and staking within 50 mts. lead
Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 meters lead.
Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 meters lead. Thickness above 38mm and upto 75mm
Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. a)Pre-construction
Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. b)Post construction
Drilling holes of specified dia., fixing it with PVC nozzles, sealing the diaphragm with Epoxy Sealant, EPCO-1010, allow it air cure for minimum 8 hours, cutting nozzles after grouting and sealing it with EPCO-1010 etc. complete as directed. Injecting low viscous high molecular weight polymer, MONOPOL with pressure created by compressor and epoxy injector with accessories. The pressure shall be not exceeding 3-4 kg/cm2 . Grouting to be done in cracks till the nozzle refuses to accept the grout or it flows from the adjacent nozzles etc. complete. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent.
Proving and laying 120 microns waterproof plastic film/sheet as per IS 14611-1998 as a separation/slip membrane laid flat without creases and with minimum overlap of 200mm at joints, nailed to underneath Plain Cement concrete, if required as directed.
Providing & Fixing in position,Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay with adhesive as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour, finishing etc. complete. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and Fixing 16 gauge Aluminum litter bins with powder coating finish of size: 23.62" Dia x 31.49" 2 nos. for wet and dry waste with 2 holding poles with connecting rods of 50mm Dia for Height and holding capacity of 50 liters. with base plate for fixing on floor with anchor bolting. The design of the litter bin will be executed as per drawing. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Filler joint iii)Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6% bitumen by weight
Supplying and stacking of good earth at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment).
Rough dressing the trenched ground including breaking clods.
Fine dressing the trenched ground.
Supply at site of work/store-deoiled neem cake duly packed in used gunny bags as per MORTH Specification 308.2
Supplying of sludge duly stacked at site/store as per MORTH Specification 308.2
Spreading of sludge, dung manure or/and good earth in required thickness (cost of sludge, dung manure or/and good earth to be paid separately).
1) Grassing with “doob” grass including watering and maintenance of the lawn for 30 days or more till the grass forms of thick lawn free from weeds and fit for moving, including supplying good earth if needed. (Cost of “doob” grass not included )c ,3) In rows 5 cm apart in either direction
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in ratio of 2: 1 by volume (2 parts or stacked volume of earth after reduction by 20% and 1 part of stacked volume of manure after reduction by 40%) flooding with water, dressing including removal of rubbish & surplus earth if any with all leads & lifts (cost of manure or sludge of extra good earth if needed to be paid for separately) Holes 1.2m dia and 1.2m deep
Providing and fixing M.S. flat iron tree guard 60cm dia & 2 m high above ground level, formed of 4 nos. 25 x 6mm and 8 nos. 25 x 3mm vertical M.S. flat iron rings in two halves, bolted together with 8mm dia and 30 mm long bolts including painting two coats with paint of approved brand and manufacture over a coat of priming, complete in all respects.
Steel work welded in built up section and framed work including cutting, hoisting, fixing in position for steel grating of size 2.00 m x 0.90 m with R.S. joists, Tees, angles, flats and channels of TATA/ SAIL/ VIZAG make only with structural steel not less than 163.6 kg. per unit including applying priming coat of red lead paint and two or more coats with superior quality ready mixed paint for steel work of approved brand and Manufacture in all shades on new work to give an even shade as per the approved drawing and direction of the Engineer in-charge.
Providing and placing concrete planters of size 1200mm X 450mm X 450mm (LXWXH) as per drawings.
Plumbing Works
Providing and fixing white vitreous china Wall Hung type (European Type) water closet with seat and lid with C.I. brass hinges and rubber fittings with flush valve nelson/ similar fully chromium plated with stop cock, wall flanges, flush pipe or elbow and vaccum breaker coupling etc. including chair bracket/rag bolts, cutting & making good the walls and floors where required and concealed seat support - W.C. Pan with white plastic seat and lid
Providing and \fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.
Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore.
providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993 a)15mm nominal bore
Providing and fixing white vitreous china flat back Large lipped front urinal basin of 590x375x390mm size with Urinal Valve Auto closing system with built in control cock & wall flange with fittings, spreader, R.S. or C.I. brackets, standard size C.P. Brassl flush pipe and spreaders with C. P. brass unions & C. P. Brass clamps with waste fitting as per IS 2556, PVC trap with outlet grating and other couplings in CP Brass complete, including painting, fittings, cutting and making good the walls and floors where required. - Range of one urinal basin
Providing nd fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. a)Flat back Wash Basin sie 630 x 450mm with a pair of 15mm CP brass Pillar Taps. a)Flat back Wash Basin sie 630 x 450mm with a pair of 15mm CP brass Pillar Taps.
providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete. a)Overall size 610mmx510mm (24"x20") bowl size 545mmx445mmx200mm (211/2"x 17 1/2"x 8") depth 200 mm. Glossy. 1.0mm thk,
Providing and fixing FANCY SINK MIXER WITH J SHAPE SWINGING CASTED SPOUT Jaguar make or equivalent
Providing and Fixing toilet paper holder a)C.P. Brass
Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws a)Glass Container
Providing and fixing 300mm long SS Grab Bar as per approved make etc. Complete. - Kohler - K-10701D-CP - Chrome Polish
Providing and fixing L shaped grab bar S.S 304 L SHAPED DISABLED GRAB BAR of IZE-600MM (H) X 600MM (D) and 32MM DIA and thickness 1.5mm of the approved brand and make - Indian - GB00526486 - Chrome Finish
Providing and fixing Straight grab bar S.S 304 Straight SHAPED DISABLED GRAB BAR of IZE-300MM (L) and 32MM DIA and thickness 1.5mm of the approved brand and make - Kohler - K-10701D-CP - Chrome Polish
Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete.
Providing & fixing fully automatic "NO TOUCH" satin finish stainless steel AISI 316 grade wall mounted hand drier suitable to operate on 240 volts, single phase 50 hz, A.C. power supply, ( motor rating 100W, 2850 rpm automatic infrared sensing device, 1600W heating element approximate 275 cum/hr air flow wind velocity 15.5 m/sec or as per Manufacturer's specifications) - Kohler - K-5486T-2-OP-White
Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz with inbuilt RO and nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with stainless steel body as per specification no. AP - Elkay ezH2O® Bottle Filling Station & Single ADA Cooler High Efficiency Filtered Refrigerated Stainless
Providing, Installing, Testing and Commissioning Stiebel Eltron - Single phase Mini Instantaneous water heater { Hydrolic Model] 6-kw, Size 342 x216 x73 [mm], wiring 4 sq mm, MCB 32. All plants,euipments,tools,machinery,leads,lifts complete.All work complete as per the drawing specification and direction of the engineer.
Providing and fixing Complementary Angle valve of approved quality conforming to IS:8931 (15mm nominal bore) - Kohler - K-11568IN-7B-CP - Chrome Polished Finish
Providing and fixing nahani trap of rigid PVC (approved make) for S.W.R. Pipes including lubricating etc. complete, without door :b)75mm
Providing & fixing Stainless steel perforated grating over Nahani trap for wash basins, shower, sinks, etc, with all necessary cutting, filling, fixing & making good the services, etc,complete - Kohler - K-7275IN-CP - Chrome Polished
Providing and fixing rigid PVC S.W. R. (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete (single/double) socketed :a)110mm dia
Providing and fixing rigid PVC S.W. R. (soil, waste and rain water drainage pipes of approved make including lubricant etc. complete (single/double) socketed :b)75mm dia
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.a)110mm dia
Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.:b)75mm dia
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :.a)110mm dia
Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :b)75mm dia
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :a)110mm dia
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door ::b)75mm dia
Providing and fixing single “Y” of rigid PVC (approved make) for S.W.R. pipes including lubricating etc complete, without door a)110mm dia
Providing and fixing single “Y” of rigid PVC (approved make) for S.W.R. pipes including lubricating etc complete, without door :b)75mm dia
Providing and fixing R.P.V.C. vent cowl: a)110mm
Providing and fixing R.P.V.C. vent cowl: b)75mm
Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design. iii) Inside size 0.60x0.60m and 0.60m deep (with medium duty DI manhole cover & frame of size 0.60x 0.60m weighing 90kgs ) including fixing with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.
Construction of manhole rectangular in shape including cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) foundation thickness of concrete 20cms and offset 10cms on both sides and first class brick work with bricks class designation 100kg/sq.cm (wire cut bricks) cement mortar 1:3 (1 cement : 3 coarse sand) 23cms thick including providing & fixing CI footrests confirming to IS 5445/69 or revised and whose weight shall not be less than 5.30kgs including fixing in man-hole at 30cm c / c in 20x 20x10cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) and 12mm thick plaster inside and outside with cement mortar 1:3 (1 cement : 3 coarse sand) including adding waterproofing compound of approved brand in cement mortar with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20m nominal size) neatly finished complete as per standard design. iv)Inside size 0.90 x 0.60m and 1.00m deep ( with medium duty DI manhole cover & frame of size 0.90x 0.60m weighing 105 kgs including fixing with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size and applying the frame & cover with coal tar.)
Providing and fixing C.I. foot rest having minimum weight 5.3 kgs in manhole with 20x20x10cm cement concrete blocks 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) as per standard design.
Supplying and fixing air tight FRP cover (LD) with frame of size 900 x 600 mm for manholes opening of water tanks including required accessories & materials etc. complate as per direction of engineer in charge.
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. (All Domestic & flushing water supply lines in duct & terrace loop by gravity & toilet internal concealed piping above 50mm dia) SCH -40 ( blue/white)Outer Dia in mm a)20mm outer dia.
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. (All Domestic & flushing water supply lines in duct & terrace loop by gravity & toilet internal concealed piping above 50mm dia) SCH -40 ( blue/white)Outer Dia in mm a)25mm outer dia.
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. (All Domestic & flushing water supply lines in duct & terrace loop by gravity & toilet internal concealed piping above 50mm dia) SCH -40 ( blue/white)Outer Dia in mm a)40mm outer dia.
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. - (All Domestic & flushing pressurised water supply lines, including UGR to OHT risers in shaft)SCH – 80 ( blue/white) Outer Dia in mm a) 20mm outer dia.
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. - (All Domestic & flushing pressurised water supply lines, including UGR to OHT risers in shaft) SCH – 80 ( blue/white) Outer Dia in mm b) 25mm outer dia.
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). (All concealed Domestic & flushing & hot toilet internal water supply & internal drainage) a)15 mm outer dia CPVC pipe
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). (All concealed Domestic & flushing & hot toilet internal water supply & internal drainage) b)20 mm outer dia CPVC pipe
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). (All concealed Domestic & flushing & hot toilet internal water supply & internal drainage) d)32 mm outer dia CPVC pipe
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer. External work. (Underground pressurised water supply line) SCH-80(blue)/(white) a) 40mm outer dia.
Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer. External work. (Underground pressurised water supply line) SCH-80(blue)/(white) b) 50mm outer dia.
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.) a)15mm nominal bore
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.) c) 25 mm nominal bore
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.) d) 32 mm nominal bore
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.) e) 40 mm nominal bore .
Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (Total domestic & flushing water supply terrace loop, down take, internal UGR to OHT, drain valves etc.) f) 50 mm nominal bore .
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Butterfly (tight shut off) valve with cast iron body conforming IS:210 FIG. 260 and disc shafts seal rings, clamping ring, nitrite rubber seal leaded bronze bearings manually operated complete conforming to BS:5155/IS:13095 etc. complete. TYPE P.N. 1.0 (Class B ) b) 100 mm Dia
Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Butterfly (tight shut off) valve with cast iron body conforming IS:210 FIG. 260 and disc shafts seal rings, clamping ring, nitrite rubber seal leaded bronze bearings manually operated complete conforming to BS:5155/IS:13095 etc. complete. TYPE P.N. 1.0 (Class B ) c) 150mm Dia
Providing and fixing non-return valve of approved quality : a) 25 mm nominal bore
Providing and fixing non-return valve of approved quality :b) 32 mm nominal bore
Providing and fixing non-return valve of approved quality : c) 40 mm nominal bore
Providing and fixing non-return valve of approved quality :d) 50 mm nominal bore
Providing and fixing non-return valve of approved quality : e) 65mm nominal bore
Providing and fixing non-return valve of approved quality :f) 80 mm nominal bore
Supply of inferential, dry dial, type Domestic Water Meter, suitable for horizontal installation, duly, sealed against tampering with couplings at both ends having pulse output facility compatible for the automatic reading system, conforming to IS:779-1974 and ISO 4064-2005 standards and bearing EEC/MID/OIML mark, (with latest Amendments) along with test certificate from FCRI/NABL as desired by the department.A) Class B-Multi Jet Water meters Dia in mm f) 50
Fixing water meter & stop cock in G. I. Pipe line including cutting & treading the pipe and making long screw etc. complete (cost of water meter and stop cock to be paid separately)
Providing and fixing C.I. Strainers for Water Meters including cost of all materials and labour. C.I. I) Strainer 'Y' type with screwed ends.I Sizes in mm C.I. Strainer 'Y' type with screwed ends.d) Sizes in mm 40
C.I. Stainer 'T' (Basket) type with flanged ends and with stainless steel or Brass mesh with opening of 2.5mm to 3mm and suitable for operating pressure of 16 kg/cm² and test pressure of 24 kg/cm² II )C.I. Strainer 'T' (Basket) Ttpe with flanged ends Sizes in mm a)50mm
C.I. Stainer 'T' (Basket) type with flanged ends and with stainless steel or Brass mesh with opening of 2.5mm to 3mm and suitable for operating pressure of 16 kg/cm² and test pressure of 24 kg/cm² II ) C.I. Strainer 'T' (Basket) Ttpe with flanged ends Sizes in mm b) 80mm
Providing and fixing ball valve ( brass ) of approved quality a)High pressure with PVC float 3) 25 mm nominal bore
Supply, Installation, Testing & commissioning of Air release valve with filter & ball valve for water supply risers, suitable for pressure of 10 Kg/Sq.cm. including flanges / union, nuts, bolts, washer etc., complete. Pasting radium Colour band near Valve, Colour text, flow direction arrow on pipe line as per ISO standared. (appropriate tagging should be done for all valves)
Supply and erecting double wall, made of virgin plastic, food grade FDA approved, phthalate-free granules and additives, 100% UV stabilised, two layers, root moulding manufacturing process with multi ribbed design overhead tanks of the following sizes. 5000 Lit
Supply and erecting double wall, made of virgin plastic, food grade FDA approved, phthalate-free granules and additives, 100% UV stabilised, two layers, root moulding manufacturing process with multi ribbed design overhead tanks of the following sizes. 1000 Lit
Supply installation, testing and commissioning of multistage centrifugal vertical directly coupled to wet type submersible motor submersible pump of the following sizes. Thee impellers should be made of SS and dynamically balanced. Main pump body should be made of corrosion resistance, zinc free, closely graded casted SS. Pump shaft, coupling, suction grid & retaining valves should be made of SS316 of higher class. Non-returning valve went Stainer incorporated with the pump. All hardwares, bolts, nuts, etc. shall be of SS only. Pump shall be of 3 phase 433V, 50Hz and with 5 star rating with higher pf, maximum efficiency and minimum power consumption. 7.5 KW
Supply installation, testing and commissioning of multistage centrifugal vertical directly coupled to wet type submersible motor submersible pump of the following sizes. Thee impellers should be made of SS and dynamically balanced. Main pump body should be made of corrosion resistance, zinc free, closely graded casted SS. Pump shaft, coupling, suction grid & retaining valves should be made of SS316 of higher class. Non-returning valve went Stainer incorporated with the pump. All hardwares, bolts, nuts, etc. shall be of SS only. Pump shall be of 3 phase 433V, 50Hz and with 5 star rating with higher pf, maximum efficiency and minimum power consumption. 2.2 KW
Interior Works
Providing and Fixing required position Medium Back Mild Steel powder coated frame and Stainless steel stand (304) with Polyurethane arms cushion is pu molded foams of 50 density. Seat & back in upholstery @ fabric (approval quality & finish costing not less than Rs900/- per meter) with nylon castors and gas lift,knee,tilt mechanism. with 100mm height adjustment all completed. items to be completed. in all respect as per drawing and reference images and instruction from Architects. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and Fixing Working Desk - Size: 1800mm L x 600mm W x 750mm H - WORK TOPS: are the working surface of modular desking system. Work tops are offered in various type and shapes. Standard shapes available are rectangle type, “L” type, angular type (120º), half round etc. Material : One side Pre laminated particle board having density 500 to 900 Kg / cu m. manufactured as per IS: 12823/ 90 standard. Thickness: 25 mm. Wire manager cavities: no grommet hole required for work top. Free open way of 40mm provided between screen / partition. Advantage of changing locations of electrical accessories easily on work top as when required by user only. Edge banding : PVC edge banding of 0.5mm, 0.8mm, 2.0mm thickness bounded with hot adhesive processed between temperatures 180º to 200º in automatic machine. Gable ends : made out of 18mm pre laminated particle boards to support the tops on both sides or on one side as the case may be. Material : Both sides / one side Pre laminated particle board. Thickness: 18 mm. Edge banding: PVC edge banding of 0.80mm thickness bounded with hot adhesive processed between temperatures 180º to 200º in automatic machine. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and FIxing - Low height Storage - Size : 800mm L x 450mm W x 1200mm H - Laminate finished as approved by Architect - Manufacturing supplying and Installation of low height storage unit having overall depth of 450mm, configurated of modular panels of flat pressed, three layered pre-laminated particle board with one side decorative lamination and other side balancing lamination (medium density), grade-I, type-II confirming to IS: 12823, supported on levelling screws including necessary fittings complete as per drawings, particular specifications and direction of Engineer-in-charge. All outer cut edges of the 25mm thick particle board top panels shall be covered and sealed with 2.00mm thick PVC edge banding tape, all exposed edges of the18mm thick particle board shall be covered with 0.7mm thick and remaining unexposed edges shall be covered and sealed with 0.45mm thick PVC edge banding tape of Rehau or Doellken or equivalent make with hot melt glue using edge banding machine at required temperature. All joinery fabrication work shall be done with minifix fittings, plastic dowels, modular clips, screws, washer etc. wherever required. (Payment shall be made for the front elevational area.)
Providing and Fixing sofa chair of over all size 700x700x750mm made of teakwood frame.or metal frame , seat to be made of 75mm thick foam, foam to the required shape supported on horizontal high tensile MS-springs and cotton strings, back made of 75mm thick foam, moulded with foam to the required shape supported on rubber strips. The sofa chair shall be upholstered with leatherette / Fabric of approved quality & finish in all respect as per drawing and reference images and instruction from Architects. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Manufacturing & Suppling pouf made out 18mm plywood with duly nail with High Density foam to be with warp with 20mm fabric on side over and approved fabric by Architect. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Two Seater Sofa - Providing and Fixing fully upholstered sofa chair of size 1500 x750x800mm for lobby with teakwood frame, seat to be made of 100mm thick PU foam, moulded with 25mm thick PU foam to the required shape supported on horizontal high tensile M.S. springs & cotton strings, back made of 75mm thick PU foam, moulded with 25mm thick PU foam to the required shape supported on rubber strips. The sofa chair shall be upholstered with fabric/leather of approved quality & finish costing. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Three Seater Sofa - Providing and Fixing fully upholstered sofa chair of size 2100mm L x 750mm W x 800mm H for lobby with teakwood frame, seat to be made of 100mm thick PU foam, moulded with 25mm thick PU foam to the required shape supported on horizontal high tensile M.S. springs & cotton strings, back made of 75mm thick PU foam, moulded with 25mm thick PU foam to the required shape supported on rubber strips. The sofa chair shall be upholstered with fabric/leather of approved quality & finish costing. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Rectangle Centre Table - Providing and Fixing Center table having 900x900x450 mm size, table top made of 18mm prelam board , supported on 25 X 25 mm Metal square pipe, 2no. 25x25mm alround horizontal ms pipe and 1 no. 25x25mm Horizontal metal . The overall height of the table shall be 450mm including polishing all teakwood/ prelam board complete as per enclosed architectural drawing & direction of EIC/Architect. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Side Table - Providing and Fixing SIDE table having 900x900x450 mm size, table top made of 18mm prelam board , supported ondia cross section Metal pipe,3no. 2. The overall height of the table shall be 450mm including polishing all teakwood/ prelam board complete as per enclosed architectural drawing & direction of EIC/Architect. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Lounge Chair - Manufacturing and supplied Lounge chair to be made in metal frame stracture with PU Moulded cushion in 40 density with clad with super soft foam and wonderfill base to be made out of conical pipe with fix/rolving in 38X20 X 18swg pipe duly pwoder coated.The sofa chair shall be upholstered with fabric/leather of approved quality & finish costing. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Lounge Sofa - Providing and Fixing fully upholstered sofa chair of size 1400 x750x800mm for lobby with teakwood frame, seat to be made of 100mm thick PU foam, moulded with 25mm thick PU foam to the required shape supported on horizontal high tensile M.S. springs & cotton strings, back made of 75mm thick PU foam, moulded with 25mm thick PU foam to the required shape supported on rubber strips. The sofa chair shall be upholstered with fabric/leather of approved quality & finish costing. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Lounge Chair - Manufacturing and supplied Lounge chair to be made in metal frame stracture with PU Moulded cushion in 40 density with clad with super soft foam and wonderfill base to be made out of conical pipe with fix/rolving in 38X20 X 18swg pipe duly pwoder coated.The sofa chair shall be upholstered with fabric/leather of approved quality & finish costing. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Round Center Table - Providing and Fixing Center table having dia 600 mm size, table top made of 18mm prelam board , supported on dia 16mm mm Metal round pipe,with center matching of pyramid shade and duly powder coated of metal frame. The overall height of the table shall be 450mm including polishing all teakwood/ prelam board complete as per enclosed architectural drawing & direction of EIC/Architect All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Round Side Table - Providing and Fixing Center table having dia 600 mm size, table top made of 18mm prelam board , supported on dia 16mm mm Metal round pipe,with center matching of pyramid shade and duly powder coated of metal frame. The overall height of the table shall be 450mm including polishing all teakwood/ prelam board complete as per enclosed architectural drawing & direction of EIC/Architect. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Round Console Table - Providing and Fixing Center table having dia 600 mm size, table top made of 18mm prelam board , supported on dia 16mm mm Metal round pipe,with center matching of pyramid shade and duly powder coated of metal frame. The overall height of the table shall be 450mm including polishing all teakwood/ prelam board complete as per enclosed architectural drawing & direction of EIC/Architect. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Rectangle Console Table - Providing and Fixing Center table having dia 600 mm size, table top made of 18mm prelam board , supported on dia 16mm mm Metal round pipe,with center matching of pyramid shade and duly powder coated of metal frame. The overall height of the table shall be 450mm including polishing all teakwood/ prelam board complete as per enclosed architectural drawing & direction of EIC/Architect. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafetaria Single Seater Sofa - Providing and Fixing fully upholstered sofa chair of size 1400mm L x 750mm D x 800mm W for lobby with teakwood frame, seat to be made of 100mm thick PU foam, moulded with 25mm thick PU foam to the required shape supported on horizontal high tensile M.S. springs & cotton strings, back made of 75mm thick PU foam, moulded with 25mm thick PU foam to the required shape supported on rubber strips. The sofa chair shall be upholstered with fabric/leather of approved quality & finish costing. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafetaria Three Seater Sofa - Providing and Fixing fully upholstered sofa chair of size 2100mm L x 750mm D x 800mm W for lobby with teakwood frame, seat to be made of 100mm thick PU foam, moulded with 25mm thick PU foam to the required shape supported on horizontal high tensile M.S. springs & cotton strings, back made of 75mm thick PU foam, moulded with 25mm thick PU foam to the required shape supported on rubber strips. The sofa chair shall be upholstered with fabric/leather of approved quality & finish costing. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafetaria Dining Table - Providing and Fixing Center table having 900x900x450 mm size, table top made of 18mm prelam board , supported on 25 X 25 mm Metal square pipe, 2no. 25x25mm alround horizontal ms pipe and 1 no. 25x25mm Horizontal metal . The overall height of the table shall be 450mm including polishing all teakwood/ prelam board complete as per enclosed architectural drawing & direction of EIC/Architect. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafetaria Tables - manufeacturing and supply ofpantry table made of 18mm plywood with laminated finish size 750mm x 750 mm x 750mm profile for table top base of thickness 12X25 metal frame mm thick structure to be metal in MS tubular sections dia 60/75mm hollow tube leg of 1.8mm thk , and base frame of 6/8mm thk metal base plate and finished with powder coating of approved colour with necessary hardware . The work shall be completely as per specification. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafetaria Chairs - Providing and Fixing the single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafetaria - Rectangle Cefe Table - "manufeacturing and supply ofpantry table made of 18mm plywood with laminated finish size 750mmx750 mm x 750mm profile for table top base of thickness 12X25 metal frame mm thick Base structure to be metal in MS tubular sections hollow tube leg of 1.8mm thk ,finished with powder coating of approved colour with necessary hardware. The work shall be completely as per specification. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafeteria - Manufacturing and supplied Lounge chair to be made in metal frame stracture with PU Moulded cushion in 40 density with clad with super soft foam and wonderfill base to be made out of conical pipe with fix/rolving in 38X20 X 18swg pipe duly pwoder coated.The sofa chair shall be upholstered with fabric/leather of approved quality & finish costing. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafetaria Tables - manufeacturing and supply ofpantry table made of 18mm plywood with laminated finish size 750mmx750 mm x 750mm profile for table top base of thickness 12X25 metal frame mm thick structure to be metal in MS tubular sections dia 60/75mm hollow tube leg of 1.8mm thk , and base frame of 6/8mm thk metal base plate and finished with powder coating of approved colour with necessary hardware . The work shall be completely as per specification. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafetaria - L Shape Sofa - manufeacturing and supply a stylish and comfortable L-shaped sofa, consisting of two connecting sections that form an "L" configuration. The sofa should feature a sturdy, durable frame made from high-quality wood or metal, with high-density foam cushioning and supportive springs. The seat and backrest should be upholstered with premium, stain-resistant fabric or leather, available in a range of colors and textures. Dimensions should be approximately 98" x 77" x 24" (H x W x D)], with adjustable headrests and removable cushions for easy maintenance. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafetaria - Rectangle Cefe Table - manufeacturing and supply ofpantry table made of 18mm plywood with laminated finish size 750mmx750 mm x 750mm profile for table top base of thickness 12X25 metal frame mm thick Base structure to be metal in MS tubular sections hollow tube leg of 1.8mm thk ,finished with powder coating of approved colour with necessary hardware . The work shall be completely as per specification. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafetaria Café Chairs - Providing and Fixing the single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafetaria - Round Cefe Table - manufacturing and supply ofpantry table made of 18mm plywood with laminated finish size 750mm x 750 mm x 750mm profile for table top base of thickness 12X25 metal frame mm thick structure to be metal in MS tubular sections dia 60/75mm hollow tube leg of 1.8mm thk , and base frame of 6/8mm thk metal base plate and finished with powder coating of approved colour with necessary hardware. The work shall be completely as per specification. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafetaria - Sofa - Providing and Fixinging fully upholstered sofa chair of size 850 x750x800mm for lobby with teakwood frame, seat to be made of 100mm thick PU foam, moulded with 25mm thick PU foam to the required shape supported on horizontal high tensile M.S. springs & cotton strings, back made of 75mm thick PU foam, moulded with 25mm thick PU foam to the required shape supported on rubber strips. The sofa chair shall be upholstered with fabric/leather of approved quality & finish costing. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafeteria - Round Centre Table - Providing and Fixinging Center table having dia 600 mm size, table top made of 18mm prelam board , supported on dia 16mm mm Metal round pipe,with center matching of pyramid shade and duly powder coated of metal frame . The overall height of the table shall be 450mm including polishing all teakwood/ prelam board complete as per enclosed architectural drawing & direction of EIC/Architect. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafetaria - Outdoor Chairs - lassic string chair finds a new outdoor dimension in this version where polyester ,carrtier collection is a celebration of a craft manufacturing: Aluminium powder coated structure is indeed welded by hand and the cords have been woven in a double polyester or acrylic twisted thread with a cotton finishing. Aluminium Pipe ø25mmX 14mm SWG with Polyester or acrylic brid Ø 3 mm. Dimenssion : 540 X 600 X 810mm. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Cafetaria - Outdoor Tables - Dining table in dine area with top Grantie 18mm thk. The top &bottom supported frames 20x20mm MS Frame. The Base are metal powder coated made out of ø70mm X 16 swg single poll pipe with 4 metal leg. Dimenssion : 1200 X 1200 X 750mm. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Tip up Auditorium Chair - Counterweight/counter-balance mechanism allows for a life6me of smooth opera6on. Combina6on of spring and damping provides quiet seat return. OUTERBACK - injec6on molded, high impact polypropylene outerback with textured surface for ease of cleaning and maintenance. Ergonomic back cushion provides op6mal support. • Cold molded foam for years of service. • Foam density: 55± 5kg/m3. Cushion thickness: 120mm (4.72”) SEAT &BACK CUSHION - Cold molded foam for years of service and comfort • Foam density: 60± 5kg/m3. Cushion thickness: 100mm (3.94”). Injec6on molded, high impact polypropylene seat pan with textured surface. ARM &END PANEL - Injec6on-molded, high impact PP wri6ng tablet. Available in PU armrest or imported hardwood armrest • Aluminum table frame support. LEG - Strong steel structural support, Electrosta6c powder coat finish. OTHER OPTIONAL FEATURES - Row/seat number plate, LED aisle light, Movable base, Rear book net, CA117 fire-retardant finish on fabric/foam. SPECIAL TREATMENT OPTION - Fabric special treatment:3M, Fire retardant:CA117/BS5852, Foam special treatment: CA117/BS5852. STANDARD TECHNIQUES - Structure: Steel tube and plate, arc welds with con6nuous wire fee, Paint: Electro sta6c epoxy powder. Finish:60~80N/m, Impact resistant: 50KG/cm, Upholstery: Abrasion resistance, ASTMD4966-98(2004), Polypropylene: Polypropylene copolymer IF727 tensile strength at break Din 53445- 28N/mm2, impacts strength DIN53453 NO BREAK, Raw material: Raw material provided by BASF Germany Company, Foam formula introduced by European technology. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and installing a model with a villages theme, measuring 850 mm in length and 1800 mm in height, will be crafted from Fiber Reinforced Plastic (FRP) for its lightweight, durability, and resistance to environmental factors. The design to feature a rural setting with miniature huts having thatched roofs, clay walls, and wooden doors, along with landscapes including fields, ponds, wells, and pathways. Hand-painted figurines to depict villagers engaged in activities such as farming and pottery, complemented by props like plows, carts, and baskets. Realistic textures for grass, mud, and water effects to be created using synthetic materials, and soft lighting to be integrated. The model to include an internal FRP or metal framework for stability, a weather-resistant finish for durability, and non-toxic materials for safety. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. MODEL WITH VILLAGES THEME - DIM : L = 850MM X H = 1800MM
Providing and installing Maratha armory and weapons using brass or any similar metal to ensure durability, authenticity, and historical accuracy. Key items will include swords (talwars), spears, shields (dhal), and traditional daggers (katars), each meticulously forged and hand-finished. The weapons will feature intricate engravings inspired by Maratha motifs, including floral patterns and insignias, with handles crafted from brass or wood, polished to a fine finish. Shields will be lightweight yet sturdy, embossed with traditional designs and fitted with secure grips. All items will undergo anti-corrosion treatment and polishing to maintain their appearance over time. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. MARATHA ARMOURY/WEAPONS - L= 3M X B=0.3M H= 0.65M
Providing and installing a 1:1 scale Mavla warrior mannequin, standing 2000 mm tall, to be crafted from durable FRP for lightweight strength. Depicted in a dynamic pose with a traditional talwar (sword) and dhal (shield) made from metal or resin, the figure should feature historically accurate Maratha attire, including a turban, kurta, and sash, painted with UV-resistant colors. Hand-painted facial features and accessories like armbands and footwear to enhance authenticity. Mounted on a stable base, with protective finishes for durability. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. MAVLA ACTION FIGURE MODEL WITH SWORD AND SHIELD - 1:1 MODEL MANEQUIN OF WARRIOR MAVLA - HT= 2000MM
Providing and installing a life-sized model mannequin of Warrior Mavla, standing at an impressive 1800mm (5.9 feet) tall. The mannequin should accurately replicate the warrior's muscular physique, facial features, and attire, including intricate details such as armor, weaponry, and accessories. The model should be constructed from durable, high-quality FRP with a sturdy internal framework to support its massive size. The surface finish should be smooth, with a realistic paint job and textures to bring the warrior to life. The mannequin should be designed for both indoor and outdoor display, with a stable base to prevent tipping or damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. MAVLA MANEQUIN - 1:1 MODEL MANEQUIN OF WARRIOR MAVLA - HT= 1800MM
Providing and installing a life-sized model mannequin of Warrior Mavla, standing at an impressive 2000mm tall. The mannequin should accurately replicate the warrior's muscular physique, facial features, and attire, including intricate details such as armor, weaponry, and accessories. The model should be constructed from durable, high-quality FRP with a sturdy internal framework to support its massive size. The surface finish should be smooth, with a realistic paint job and textures to bring the warrior to life. The mannequin should be designed for both indoor and outdoor display, with a stable base to prevent tipping or damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. MAVLA IN ACTION MODEL - (EXT+INT) - 1:1 MODEL MANEQUIN OF WARRIOR MAVLA - HT= 2000MM
Providing and installing a highly detailed, large-scale model of the Maratha trade ship "Galbat Naranag", measuring 2400mm (7.87 feet) in length, 450mm (1.48 feet) in beam, and 1600mm (5.25 feet) in height. The model should be constructed using a combination of materials, such as wood, fiberglass, and resin, to achieve a durable and realistic finish. The exterior should feature intricate details, including textured hull planking, ornate carvings, and authentic rigging. The model should also include accurately scaled and detailed features, such as anchors, cannons, and navigational instruments. The boat model should be painted and finished to accurately represent a 17th-century Maratha trade ship, with weathering effects and subtle color variations to enhance realism. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. MARATHA TRADE SHIP MODEL - SHIP NAME - GALBAT NARANAG DIMENSION : L= 2400MM X B= 450MM H=1600MM
Providing and fixing a highly detailed, large-scale model of the Maratha trade ship "Galbat Sadashiv", measuring 2400mm (7.87 feet) in length, 450mm (1.48 feet) in beam, and 1600mm (5.25 feet) in height. The model should be constructed using a combination of materials, such as wood, fiberglass, and resin, to achieve a durable and realistic finish. The exterior should feature intricate details, including textured hull planking, ornate carvings, and authentic rigging. Accurately scaled and detailed features, such as anchors, cannons, and navigational instruments, should also be included. The boat model should be painted and finished to accurately represent a 17th-century Maratha trade ship, with weathering effects and subtle color variations to enhance realism. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. MARATHA TRADE SHIP- SHIP NAME - GLABAT SADASHIV - DIMENSION : L= 2400MM X B= 450MM H=1600MM
Providing and installing a highly detailed, large-scale model of the Maratha merchant ship "Machava", measuring 2400mm (7.87 feet) in length, 450mm (1.48 feet) in beam, and 1600mm (5.25 feet) in height. Constructed from a combination of materials, including wood, fiberglass, and resin, the model should achieve a durable and realistic finish. Intricate exterior details, such as textured hull planking, ornate carvings, and authentic rigging, should be accurately replicated. Additional features, including anchors, cannons, navigational instruments, and cargo holds, should be precisely scaled and detailed. The boat model should be painted and finished to accurately represent a 17th-century Maratha merchant ship, with weathering effects and subtle color variations to enhance realism. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. MARATHA MERCHANT SHIP - SHIP NAME - MACHAVA DIMENSION : L= 2400MM X B= 450MM H=1600MM
Providing and installing a highly detailed, large-scale model of the Maratha battle ship "Gurab Mira Daulat of Dhondji Angre", measuring 2400mm (7.87 feet) in length, 450mm (1.48 feet) in beam, and 1600mm (5.25 feet) in height. Constructed from a combination of materials, including wood, fiberglass, and resin, the model should achieve a durable and realistic finish. Intricate exterior details, such as textured hull planking, ornate carvings, and authentic rigging, should be accurately replicated. Additional features, including cannons, anchors, navigational instruments, and battle-scarred hull, should be precisely scaled and detailed. The boat model should be painted and finished to accurately represent a 17th-century Maratha battle ship, with weathering effects and subtle color variations to enhance realism. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. MARATHA BATTLE SHIP - SHIP NAME - GURAB MIRA DAULAT OF DHONDJI ANGRE - DIMENSION : L= 2400MM X B= 450MM H=1600MM
Providing and installing a highly detailed, large-scale model of the Maratha battle ship "Gurab Bhavinprasad", measuring 2400mm (7.87 feet) in length, 450mm (1.48 feet) in beam, and 1600mm (5.25 feet) in height. Constructed from a combination of materials, including wood, fiberglass, and resin, the model should achieve a durable and realistic finish. Intricate exterior details, such as textured hull planking, ornate carvings, and authentic rigging, should be accurately replicated. Additional features, including cannons, anchors, navigational instruments, and battle-scarred hull, should be precisely scaled and detailed. The "Gurab Bhavinprasad" should be painted and finished to accurately represent a 17th-century Maratha battle ship, with weathering effects and subtle color variations to enhance realism. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. MARATHA BATTLE SHIP - SHIP NAME - GURAB BHAVINPRASAD DIMENSION : L= 2400MM X B= 450MM H=1600MM
Providing and installing a premium exhibition signage with a combination of wooden and metal materials. The signage should feature a wooden plate with a dimension of 450mm in length and 100mm in height. The text, with a height of 100mm, should be made of metal and finished in gold plating to convey luxury and sophistication. The signage should be suitable for both indoor and outdoor exhibitions, with a durable and weather-resistant finish. The design should ensure clear visibility and readability of the text, with proper spacing and font style. The overall construction should be sturdy and easy to install, with a sleek and modern appearance that complements the exhibition's theme and design. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. EXHIBITION SIGNAGE - (ext+int) - PLATE MATERIAL : WOODEN PLATE, TEXT MATERIAL : METAL FINISHED IN GOLD - PLATE DIM : L = 450MM X H = 100MM, TEXT HT : 100MM - (ALL AREAS)
Providing and installing a visually appealing history title text signage using 6mm thick acrylic material. The text height should be 60mm, with the exact text content and design to be followed as per the provided content and signage drawing (DRG). The acrylic text should be precisely cut and fabricated to ensure clean edges and a smooth finish. The signage should be durable, weather-resistant, and easy to install. The design should ensure clear readability and visibility of the text, with proper spacing, font style, and color scheme to match the surrounding environment. The overall appearance should be professional, modern, and attention-grabbing, effectively conveying the historical significance and narrative. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. HISTORY TITLE TEXT - ( AS PER CONTENT/SIGNAGE DRG) - TEXT MATERIAL : 6MM THK ACRYLIC - TEXT HT : 60MM
Providing and installing an interactive Audio-Visual (AV) Information Wall that showcases engaging multimedia content. The wall should integrate multiple display screens, audio systems, and interactive elements, such as touchscreens or sensors, to provide an immersive experience. The wall's design should be visually striking, with a sleek and modern aesthetic that complements the surrounding environment. Ensure seamless integration with existing infrastructure, including power supply, networking, and content management systems. The AV Information Wall should be durable, low-maintenance, and adaptable to future technological advancements. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. A.V INFO WALL
Providing and installing a intricately designed Language Scroll, inspired by the traditional Farman Scroll. The scroll should be crafted from high-quality, durable materials, such as parchment or specialty paper, with a natural, aged appearance. The text, written in a historically accurate script, should be carefully calligraphed and illustrated with traditional motifs, such as floral patterns, geometric shapes, and intricate borders. The scroll's dimensions, color palette, and design elements should be meticulously researched to ensure historical accuracy and authenticity. The finished scroll should be a stunning representation of ancient craftsmanship, conveying the significance and grandeur of the Farman Scroll's historical importance. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. LANGUAGE SCROLL - FARMAN SCROLL
Providing and installing a large-format Mavla Poster, measuring 850mm in length and 1800mm in height. The poster should feature high-resolution graphics, images, and text, as per the provided content, showcasing the history, significance, and bravery of the Mavla warriors. The design should be visually striking, with a clear and easy-to-read layout, incorporating appropriate fonts, colors, and illustrations to convey the narrative. The poster should be printed on high-quality, durable material, such as canvas, to ensure longevity and resistance to fading or damage. The finish should be matte, with a smooth texture, and the poster should be suitable for indoor display. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. MAVLA POSTER - DIM : L = 850MM X H = 1800MM - (INFORMATION AS PER CONTENT)
Providing and installing a bronze mural, measuring 3 meters in width, 2.4 meters in height, and 6 inches in thickness, showcasing the legendary life and legacy of Chhatrapati Shivaji Maharaj. The relief artwork should be crafted from high-quality bronze alloy, with intricate details and textures, to create a visually stunning and historically accurate representation. The bronze finish should be patinated to achieve a rich, warm color, with a durable clear coat to protect the artwork from environmental elements. The mural should be engineered for stability and durability, with a sturdy internal framework and secure mounting system, to ensure safe installation and long-term preservation. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Chhatrapati Shivaji Maharaj Mural (relief art work) in BRONZE - Size 3 M x 2.4 M X 6” THK
Supply and installation of a Dagadu Sheth-style Ganesh Murti made from high-quality White Marble. The statue shall measure H 1230mm x W 950mm. The scope of work includes designing, crafting, transportation, and installation of the idol at the designated site. The marble used should be of premium quality, and the craftsmanship should ensure intricate details and a smooth finish. The installation should be carried out by skilled professionals to ensure safe and secure placement of the idol. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Supply and installation of a water fountain made from premium Black Bhainsalana Marble, measuring 2.21m in height and 2.76m in width. The fountain shall have a high-gloss black polish finish, as per the architect's instructions. The scope of work includes designing, crafting, and installation of the fountain, complete with outlet-inlet fittings and a bronze nozzle. Transportation to the site and installation by skilled professionals is also included, ensuring a safe and functional water feature. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Supply and installation of a submersible water fountain in the pond, featuring a bubbler nozzle and crafted from premium Black Bhainsalana Marble. The fountain shall have a high-gloss black polish finish and include outlet-inlet fittings and a bronze nozzle. The installation shall ensure a secure and watertight connection, with the fountain positioned to create an aesthetically pleasing display in the pond. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Supply and installation of a 3-seater bench made from Cast Iron (CI) casting and galvanized strips for the seating area. The bench dimensions are: seat height 18", seat depth 22", handle height 30", and back height 36". The weight of the bench is approximately 130-140 kg. The finish shall be brownish black powder coating, or as per the architect's instructions. The contractor shall also undertake the necessary civil work for installation. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.High Voltage - 6"x 4"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Restricted Areas - 4"x 12"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Fire Exit - 4" x 12"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Fire Alarm Call Point - 8" x 10"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. In case of Fire - 8" x 10"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Fire Hose Reel - 8" x 10"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Fire Extinguishers - 8" x 10"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. No Smoking - 6" x 6"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Storage Area - 4" x 12"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Fire Panel - 4" x 12"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Electrical Shaft - 4" x 12"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Fire Shaft - 4" x 12"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. EV Changing Station - 8" x 12"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Emergency EXIT Light Wall mounted with Rechargeble Battery - 12" x 6"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Assembly Points - 24" x 24"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Emergency Plan - 12" x 7"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Arrow Type - 80mm x 10 Mtr
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Access Symbol - 8" x 8"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Ramp - 8" x 8"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Telephone - 8" x 8"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Lift - 8" x 8"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Parking - 8" x 8"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Directional Signage - 8" x 8"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Floor Number - 8" x 9"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Lift Machine Room - 4" x 12"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Panel Room - 4" x 12"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Store Room - 4" x 12"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Office - 4" x 12"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. CCTV Room - 6" x 8"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Meter Room - 4" x 12"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Sanitation Room - 4" x 12"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. WashRoom - 16" x 5"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. PUSH PULL - 5" x 2"
Providing and Installing Acrylic Signage - Design and fabricate high-quality signages using 3mm thick acrylic sheets, featuring an auto-glow media applied on the sides to create a captivating glow effect. The acrylic sheets should be laser-cut to precise dimensions, with smooth, rounded edges and a glossy finish. Apply pesting (vinyl lettering/adhesive) and printing techniques to achieve crisp, vibrant graphics and text. Ensure the auto-glow media is evenly distributed and securely attached to prevent peeling or fading. The signages should be durable, weather-resistant, and easy to install, with pre-drilled holes or a suitable mounting system. Finish with a clear protective coating to safeguard against scratches, dust, and UV damage. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer. Kitchen - 4" x 12"
Constructing and installing a 6m tall replica of the Saptakoteshwar Stambh using laterite stone, with intricate carvings, plastering, and weather-resistant painting.The structure should have a height of 6 meters, with a base diameter of 2.5 meters and a top diameter of 0.75 meters, tapering elegantly from base to top. The laterite stone should be cut, dressed, and polished to achieve a smooth, even finish, highlighting the intricate carvings and details. Subsequently, apply a layer of plastering to the entire structure, using a mixture of cement, sand, and water, to create a uniform surface. Finish with multiple coats of weather-resistant painting, using a suitable primer and exterior-grade paint. The price should include all costs, such as transportation of materials, skilled and unskilled labour, crane charges, tools, and electricity, ensuring a complete and functional installation. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Construct and install a 3.5m tall Deepastambh using laterite stone, and ornate details. The structure should consist of a square or octagonal base, a cylindrical or octagonal shaft, and a decorative capital. The laterite stone should be cut, dressed, and polished to achieve a smooth, even finish. Plastering, and weather-resistant painting. Dimensions: base diameter 1.8m, tapering to a smaller diameter at the top. The contract price shall include all costs, such as transportation of materials, skilled and unskilled labour, crane charges, tools, and electricity, ensuring a complete and functional installation. All material shall be of approved make. The material rates including Material, Labour, Transporation and Accessories etc. All work complete as per the drawing specification and direction of the engineer.
Providing and installation of a Bronze Standing statue of Chhtrapati Shivaji Maharaj of Height 40 Feet ,Width 25 Feet,Length 30 Feet carrying a long sword in Hand.Material / Composition Bronze,Weight 40 Ton+ ,Color Bronze (Deo Paint +PU Lacquer Coating) with intricate details and textures to achieve a historically accurate and visually stunning representation. The base and foundation will be of RCC of required strength to support the statue's weight and withstand environmental factors. A durable patinated bronze finish with clear coat protection will safeguard the statue against corrosion and weathering, guaranteeing a lasting tribute to Shivaji Maharaj's enduring legacy.All material of approved make .All work complete as per direction of the Engineer in Charge.
Electrical Works
Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (g) 6 way (4+18), double door, Horizontal type Cat B
Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (g) 6 way (4+18), double door, Horizontal type Cat B
Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (i) 8 way (8+24), double door, Horizontal type Cat B
Supplying installation testing and commissioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar din bar for mounting MCBs detachable gland knock out plate and with 100 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCB/MCBs as required) (f) 12 way with 100A MCCB as Incomer, double door, Cat B
Providing and fixing following rating and breaking capacity adjustible 4 pole MCCB inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc as required (a) 100 A Adjustable 35/40 KA, CAT B
Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (j) TPN, Cat B
Supplying and fixing 63 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (i) TP, Cat B
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (f) SP, Cat B
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (i) TP, Cat B
Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (j) TPN, Cat B
Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required (f) 63 A, Cat B
Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required (e) 32 A, Cat B
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 240 sq.mm
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.3 1/2 Core 185 sq.mm
Supply of 3 1/2 core armoured PVC/XLPE insulated,PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I),IS:7098(Part I) with latest amendments of following size. 3 1/2 Core 95 sq.mm
Supply of 3 1/2 core armoured PVC/XLPE insulated,PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I),IS:7098(Part I) with latest amendments of following size.3 1/2 Core 70 sq.mm
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.4 Core 35 sq.mm
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 25 sq.mm
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 1.5 sq.mm
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 6 sq.mm
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 4 sq.mm
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 1/2 x 240 Sq. mm.
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 1/2 x 240 Sq. mm.
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 1/2 x 240 Sq. mm.
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 1/2 x 240 Sq. mm.
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 Core 35 sq.mm
Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 Core 25 sq.mm
Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (5) 4 x 16 Sq. mm.
Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (3) 4 x 6 Sq. mm.
Supplying and making cable end terminations with brass compression gland and copper lugs for following sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (3) 4 x 4 Sq. mm.
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.(a) In soily strata
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable)and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata
Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm direct in ground in the same trench in one tier horizontal formaion including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm o surface, etc. complete as required
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sq.mm but not exceeding 400 sq.mm on surface, etc. complete as required
Supply and fixing of cable route marker 15 cms diameter of GI plate 6mm thick with inscription theron bolted or welded to 25mm x 25mmx 5mm angle iron 60 cms long and fixing the same in ground with PCC etc complete as required.
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300mm width x 50mm depth
Supplying and Installing following size perforated type 14 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 450mm width x 50mm depth
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (f) Group C -- with Cat B Modular Accessories
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) with 2 way modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(b) with Cat B Modular accessories
Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit( medium) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm casing )
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm casing )
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connection painting etc. as required. (b) CAT B
Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required. (b) CAT B
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (k) 3 pin 5/6 A socket outlet Cat B
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (j) 15/16 A switch Cat B
Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required (m) Telephone socket outlet Cat B
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (f) 1 or 2 Module ( 75 mm x 75 mm) Cat B
Supplying and fixing following size modular GI box alongwith modular base and cover plate for modulator switches in recess etc. as required (i) 8 Module ( 125 mm x 125 mm) Cat B
Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. CAT B
Supplying and drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required. (a) 2 Pair
Supplying and drawing/fixing jelly filled outdoor type armoured telephone cable with 0.5 sq.mm dia. tinned copper conductor, ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required.(c) 20 Pair
Supplying, installing, testing and commissioning of Junction Box, ITD/DOT approved, indoor type with wall mounting/concealed facility having front door with lock along with aluminium frame for mounting disconnection type Krone modules, complete cabinet fabricated from 18 SWG CRCA sheet with powder coating in appropriate manner and suitable for following capacity of pairs, including Krone makemodules, crimping and terminations, etc. complete as required. (b) 20 Pair
Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required (b) Cat 6 +
Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. CAT B
Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories isurface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. (a) 20 mm
Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 80mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested.The scope of work includes boring( 300mm dia mimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value.Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode (a) 3 metres length electrode
Supply of Back fill Compound/ Groung resistance enhancement powder conforming to the enclosed specifications.
Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing special protective masonry chamber as per enclosed drawing ( to be paid extra) (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid seperately). (a) In soily strata( Masonry chamber not included)(a) In soily strata( Masonry chamber not included)
Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing special protective masonry chamber as per enclosed drawing ( to be paid extra) (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately).
Constructing a special masonry inspection chamber for earthing system as per the enclosed drawing and specifications. The square chamber( 860 x860mm) shall be constructed with brick masonry of 230 mm on a solid base of 75mm rubble packing and 75mm PCC. The floor level shall be finished with 50mm cement concrete. The inside wall of the chamber shall be plastered with 12mm plaster finish. A removable CI/RCC cover of size 400x 400mm on a angle box frame of 35x35x5mm shall be provided with locking arrangements/ lifting lugs. The scope of work includes all material labour etc complete as required.
Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt)
Supplying and laying 25 mm x 5 mm Copper strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
Providing and fixing 25 mm x 5 mm copper strip on surface r in recess for coneections etc. as required
Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
Supplying and laying 25 mm x 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required
Providing and fixing 6 SWG dia GI wire on surface or in recess for loop arthing . as required
Supply of following size of 3 core, HV, 11 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off,inner sheath of PVC tape,galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments. (4) 3 Core 95 sq.mm
Supplying and making Outdoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required.(b) 11 KV, 3 Core x 50 - 95 sq.mm
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) Soily Strata
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of grade exceeding 1.1 KV but not exceeding 11 KV grade of size not exceeding 400 sq.mm direct in the existing masonry open duct. complete as required
Supply, Installation, Testing and Commissioning of weather proof, dust & vermin proof, floor mounted front operated and back side sealed indoor type fully compartmentalised panel board made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accessories, supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal partitions & separate busbar and cable alley, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete and as per requirements & instruction of engineer-in-charge. The rates includes the cost of switch-gears, bus bars, inter connecting mains & Copper Aluminium strips, meters, Fuses, wired up to control strips provided in cable alley, base channel, etc. following electrical panel. The panel shall be type tested and manufactured with authorised system house of approved make of switch-gears. Authorisation letter is to be submitted along with the tender. All MCCB shall be of Microprocessor trip only. L. T. PANEL: Supply, Installation, Testing and commissioning of Main LT panel having followings: Incoming: 630 Amp ATS, 630 Amp 50 KA TPN MCCB with inbuilt O/c, E/f, O/c protection and with shunt trip inbuilt as incoming. as per the SLD enclosed. METERING: Load manager for all measuring units for current and voltage both along with PF, 3 no. CT of 630/5 A CL-1.0, 15 VA, 1 No. CT of 630/1 A CL-5p20, 15 VA, 3 no. LED Indicating lamps with required control MCB, etc. BUSBAR: 700 Amp. 415 v, 50Hz, 50 KA AL TPN Busbar OUTGOINGS: 2 No. 250 Amp 35 KA TPN MCCB having inbuilt O/c, S/c and E/f Protection, 4 No. 125 Amp 35 KA TPN MCCB having inbuilt O/c, S/c and E/f Protection, 1 No. 63 Amp 35 KA TPN MCCB having inbuilt O/c, S/c and E/f Protection. The panel shall be as per SLD enclosed.
MAIN LIGHTING PANEL: Supply, Installation, Testing and commissioning of Main Lighting panel having followings: Incoming: 250 Amp 25 KA TPN MCCB with inbuilt O/c, E/f, O/c protection inbuilt as incoming. METERING: Load manager for all measuring units for current and voltage both along with PF, 3 no. CT of 250/5 A CL-1.0, 15 VA, 3 no. LED Indicating lamps with required control MCB, etc. BUSBAR: 300 Amp. 415 v, 50Hz, 50 KA AL TPN Busbar OUTGOINGS: 1 No. 160 Amp 25 KA TPN MCCB, 1 No. 125 Amp 25 KA TPN MCCB, 3 No. 63 Amp 25 KA TPN MCCB, 7 No. 32 Amp TPN MCB. The panel shall be as per SLD enclosed.
MAIN POWER PANEL: Supply, Installation, Testing and commissioning of Main Power panel having followings: Incoming: 125 Amp 25 KA TPN MCCB with inbuilt O/c, E/f, O/c protection inbuilt as incoming. METERING: Load manager for all measuring units for current and voltage both along with PF, 3 no. CT of 125/5 A CL-1.0, 15 VA, 3 no. LED Indicating lamps with required control MCB, etc. BUSBAR: 300 Amp. 415 v, 50Hz, 50 KA AL TPN Busbar OUTGOINGS: 1 No. 63 Amp 25 KA TPN MCCB, 5 No. 32 Amp TPN MCB. The panel shall be as per SLD enclosed.
MAIN HVAC PANEL: Supply, Installation, Testing and commissioning of Main HVAC panel having followings: Incoming: 250 Amp 25 KA TPN MCCB with inbuilt O/c, E/f, O/c protection inbuilt as incoming. METERING: Load manager for all measuring units for current and voltage both along with PF, 3 no. CT of 250/5 A CL-1.0, 15 VA, 3 no. LED Indicating lamps with required control MCB, etc. BUSBAR: 700 Amp. 415 v, 50Hz, 50 KA AL TPN Busbar OUTGOINGS: 4 No. 80 Amp 25 KA TPN MCCB, 2 No. 63 Amp 25 KA TPN MCCB. The panel shall be as per SLD enclosed.
APFCR PANEL: Supply, Installation, Testing and commissioning of APFCR panel having followings: Incoming: 160 Amp 25 KA TPN MCCB with inbuilt O/c, E/f, O/c protection inbuilt as incoming. METERING: Load manager for all measuring units for current and voltage both along with PF, 3 no. CT of 630/5 A CL-1.0, 15 VA, 3 no. LED Indicating lamps with required control MCB, 1 No. 8 step APFC Relay, etc. BUSBAR: 200 Amp. 415 v, 50Hz, 50 KA AL TPN Busbar OUTGOINGS: 2 No. 63 Amp. Capacitive duty MCB having 63 Amp. Capacitive duty contractor, Auto manual switch, push button and having 15 KVAR APP type 3 phase capacitor bank inbuilt, 6 No. 32 Amp. Capacitive duty MCB having 32 Amp. Capacitive duty contractor, Auto manual switch, push button and having 3 no. 10 KVAR / 3 no. 5 KVAR APP type 3 phase capacitor bank inbuilt, etc. complete. The panel shall be as per SLD enclosed.
EXTERNAL LIGHTING PANEL: Supply, Installation, Testing and commissioning of External Lighting panel having followings: Incoming: 63 Amp TPN MCB, 63 Amp. FP Contactor, 1 no. Auto manual switch, 1 No. On-off push button, 1 no. longitude-Latitude meter, etc. as incoming. BUSBAR: 100 Amp. 415 v, 50Hz, 50 KA AL TPN Busbar OUTGOINGS: 3 No. 32 Amp TPN MCB, 5 No. 20 Amp TPN MCB. The panel shall be as per SLD enclosed and double door type double slopped roof external IP65 protection panel having 450 mm stand plus grouting length for four legs. This panel shall be installed with grouting four legs with RCC foundation etc. complete.
EXTERNAL FEEDER PILLAR-1 PANEL: Supply, Installation, Testing and commissioning of External Feeder pillar-1 panel having followings: Incoming: 32 Amp TPN MCB, 3 no. indication lamp with control MCB as incoming. BUSBAR: 50 Amp. 415 v, 50Hz, 50 KA AL TPN Busbar OUTGOINGS: 4 No. 20 Amp TPN MCB. The panel shall be as per SLD enclosed and double door type double slopped roof external IP65 protection panel having 450 mm stand plus grouting length for four legs. This panel shall be installed with grouting four legs with RCC foundation etc. complete.
EXTERNAL FEEDER PILLAR-2 PANEL: Supply, Installation, Testing and commissioning of External Feeder pillar-1 panel having followings: Incoming: 32 Amp TPN MCB, 3 no. indication lamp with control MCB as incoming. BUSBAR: 50 Amp. 415 v, 50Hz, 50 KA AL TPN Busbar OUTGOINGS: 8 No. 20 Amp TPN MCB. The panel shall be as per SLD enclosed and double door type double slopped roof external IP65 protection panel having 450 mm stand plus grouting length for four legs. This panel shall be installed with grouting four legs with RCC foundation etc. complete.
Supply, Installation, Testing and Commissioning of 3 phase 4 wire KWH meter having 3 CT of 32 to 63 Amp. CTs and control fuses complete in one compartment panel board.
HT OUTDOOR BREAKER: Supply, Installation, Testing and Commissioning of 11 KV HT outdoor type switchgear 21 kA for 3 Sec. 400 A 50 Hz, gas insulated VCB with direct connection of Incoming / outgoing supply cable of 95 sq mm with Self Powered Relay 3 O/C +1 E/F Relay type CSPR-V5, mechanical ON/OFF indicator, trip coil , Manual Close & Trip PB, live cable indicator, mechanical interlocks, pad locking facility, SF6 gas manometer, cable boots, 3 nos. CTs with Ratio 20/1A, Cl: 5P10, 2.5 VA for protection. The enclosure should be of IK10 type.The Enclosure shall construction shall be GI of thickness at least 1.6/2mm.The enclosure shall be Powder Coated. Each compartment will be provided with the door and pad locking arrangement. The Compartment illumination lamp with door operated switch and heater with switch shall be provided for each compartment. HT Breaker shall be as per SLD enclosed with all protection replays mentioned in it.
Supply, Installation, Testing and Commissioning of Surface Mounted 2X2 40W 4000K Diffussed Led Fitting With Non Dimmable Driver.Highly Efficient Panels Designed To Fit Into Modular Ceilings. Ecofit Panels Provide General And Uniform Lighting, Has A Compact Design Of Modest Dimensions. Its Reduced Height Makes It Ideal For Flush Mount In Shallow Ceilings, Structure Material: Polycarbonate, Aluminium With Opal Diffuser. Matt White Finish Ip20 Rated Real Lumen 3600 Lm With Efficacy 90 Lm/W. The Beam Angle To Be 120 Degrees Mac Adam Step ≤ 3 With Cri 80+ .Led Life To Be 50,000 Hrs With L80/B20 Criteria. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. External Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Provided
Supply, Installation, Testing and Commissioning of L01A : Surface Mounted 2X2 40W 5700K Ip54 Diffussed Led Fitting With Non Dimmable Driver. Highly Efficient Panels Designed To Fit Into Modular Ceilings. Ecofit Panels Provide General And Uniform Lighting, Has A Compact Design Of Modest Dimensions. Its Reduced Height Makes It Ideal For Flush Mount In Shallow Ceilings, Structure Material: Polycarbonate, Aluminium With Opal Diffuser. Matt White Finish Ip54 Rated Real Lumen 3600 Lm With Efficacy 90 Lm/W. The Beam Angle To Be 120 Degrees Mac Adam Step ≤ 3 With Cri 80+ Led Life To Be 50,000 Hrs With L80/B20 Criteria. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. External Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Provided
Supply, Installation, Testing and Commissioning of Recessed Ceiling 18W Diffused 4000K Led With Non Dimmable Driver. Highly Efficient Panels Designed To Fit Into Modular Ceilings. Ecofit Panels Provide General And Uniform Lighting, Has A Compact Design Of Modest Dimensions. Its Reduced Height Makes It Ideal For Flush Mount In Shallow Ceilings Structure Material: Polycarbonate, Aluminium With Opal Diffuser. Matt White Finish Ip20 Rated, Real Lumen 1620 Lm With Efficacy 90 Lm/W. The Beam Angle To Be Wide Beam. Mac Adam Step ≤ 3 With Cri 80+ Led Life To Be 50,000 Hrs With L80/B20 Criteria. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. External Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Provided
Supply, Installation, Testing and Commissioning of In Pelmet 12W/Meter 3000K Linear Led Strip With Opal Diffuser The Extruded Aluminium Anodized Corner Channel With Opal Polycarbonate Diffuser For Dotless Effect. Led Strip To Be Ip20 To Be Provided With All Mounting Accessories Real Lumen 1284 Lm (±50 Lm) With Efficacy ≥ 107Lm/W. The Distribution To Be 120 Degrees. Mac Adam Step ≤ 3 With Cri 80+ Led Life To Be 50,000 Hrs With L80/B20 Criteria. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer.
Supply, Installation, Testing and Commissioning of Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included. ( 5 Meter - 1 Driver )
Supply, Installation, Testing and Commissioning of Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included. ( 10 Meter - 1 Driver )
Supply, Installation, Testing and Commissioning of Recessed Ceiling 3000K 15W Wide Beam Deep Cob Led With Non Dimmable Driver. Non-Glare Dark Light Deep Recessed Led With Front Opening Accesories Die Cast Aluminium Housing With "White Finish" And Clear Diffuser With 30 Degrees Adjustable Bracket. Ip23 With Real Lumen 1455 Lm (±50 Lm) And Real Efficacy 97Lm/W. Wide Beam ( 36 Degrees To 48 Degrees ) Mac Adam Step ≤ 3 With Cri 85+ Led Life To Be 50,000 Hrs With L80/B20 Criteria. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included.
Supply, Installation, Testing and Commissioning of Recessed Ceiling 3000K 15W Wide Beam Deep Cob Led With Non Dimmable Driver. Non-Glare Dark Light Deep Recessed Led With Front Opening Accesories Die Cast Aluminium Housing With "Black Finish" And Clear Diffuser With 30 Degrees Adjustable Bracket. Ip23 With Real Lumen 1455 Lm (±50 Lm) And Real Efficacy 97Lm/W. Wide Beam ( 36 Degrees To 48 Degrees ) Mac Adam Step ≤ 3 With Cri 85+ Led Life To Be 50,000 Hrs With L80/B20 Criteria. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included.
Supply, Installation, Testing and Commissioning of Of Surface Ceiling 15W 3000K Diffused Led Down Light. Die Cast Aluminium Housing With Opal Diffuser With Best In Class High Efficiency Led Modules. Ip54 Rated. Real Lumen 1350 Lm With Efficacy ≥ 90Lm/W. The Distribution To Be Wide Beam Led Life To Be 50,000 Hrs With L80/B20 Criteria. Mac Adam Step ≤ 3 With Cri 80+ The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included.
Supply, Installation, Testing and Commissioning of Track Mounted 6.5W 3000K Framing Projector With Non Dimmable Driver. Miniaturised Adjustable Profiler Projector Complete With Adapter Built Into Semi-Hidden Box Containing The Dimmable Electronic Driver That Allows The Light Emission To Be Adjusted (Push-Dim System With Manual Button). The Adapter Unit Is Inserted Mechanically On The Mains Electrified Track, Tool-Free. Die-Cast Aluminium Technical Body For Led Lamp; An External Pin That Is Activated Manually Allows The Inclination Of The Luminaire To Be Locked And Guarantee Stability And High Precision Aiming - High Definition Optibeam Reflector. The Aluminium Optical Assembly Includes A Sophisticated Telecentric Optics System Consisting Of Four Anti-Reflection-Treated Glass Lenses. Black Anodised Aluminium Locknut For Manual Focusing. The Innovative Optical System, Combined With The Option Of Manual Adjustment And Four Shaping Flaps, Allows Precise, Well-Defined Wall Lighting With No Halo Effects Or Soft Edges. The Optical Assembly Is Fixed To The Technical Body With A Rapid And Practical Magnetic System. This Solution Allows It To Be Rotated By 360° Which Increases Its Versatility Considerably. The Projector Is Designed To Obtain A Square, Rectangular Or Variously Irregular Beam By Manoeuvring The Flaps. The Package Includes Two Gobos For Circular Shapes. Ip20 With Real Lumen 552 Lm With Efficacy 22.8 Lm/W Mac Adam Step ≤ 2 With Cri 90+ Led Life To Be 50,000 Hrs With L90/B10 Criteria. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included.
Supply, Installation, Testing and Commissioning of 1 Meter Track For Above
Supply, Installation, Testing and Commissioning of 2 Meter Track For Above
Supply, Installation, Testing and Commissioning of Power Connector
Supply, Installation, Testing and Commissioning of Jointer
Supply, Installation, Testing and Commissioning of End Connector
Supply, Installation, Testing and Commissioning of Recessed Ceiling 12W 3000K Medium Beam ( 24 Degrees ) Led Down Light With Non Dimmable Driver Non-Glare Dark Light, Die Cast Aluminium Housing With White Finish And Clear Diffuser. Ip23 With Real Lumen 1164 Lm (±50 Lm) And Real Efficacy 97Lm/W. Medium Beam ( 24 Degrees ) Mac Adam Step ≤ 3 With Cri 85+ Led Life To Be 50,000 Hrs With L80/B20 Criteria. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included.
Supply, Installation, Testing and Commissioning of In Pelmet 12W/Meter 3000K Linear Cob Led Strip With Opal Diffuser The Extruded Aluminium Anodized Corner Channel With Opal Polycarbonate Diffuser For Dotless Effect. Led Strip To Be Ip20 To Be Provided With All Mounting Accessories Real Lumen 1284 Lm (±50 Lm) With Efficacy ≥ 107Lm/W. The Distribution To Be 120 Degrees. Mac Adam Step ≤ 3 With Cri 80+ Led Life To Be 50,000 Hrs With L80/B20 Criteria. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer.
Supply, Installation, Testing and Commissioning of Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included. ( 05 Meter - 1 Driver )
Supply, Installation, Testing and Commissioning of Surface Mounted 18W Ip54 4000K Diffused Led With Non Dimmable Driver. Die Cast Aluminium Housing With Top Mounted Deep Recessed Smd Led Modules And Pmma Diffuser To Provide General And Uniform Lighting, Matt White Finish Ip54 Rated Real Lumen 1620 Lm With Efficacy 90 Lm/W. The Beam Angle To Be 120 Degrees. Led Life To Be 50,000 Hrs With L80/B20 Criteria. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. Inbuilt Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Provided
Supply, Installation, Testing and Commissioning of Surface Mounted 24W 5700K Diffused Led With Non Dimmable Driver. Die Cast Aluminium Housing With Top Mounted Deep Recessed Smd Led Modules And Pmma Diffuser To Provide General And Uniform Lighting, Matt White Finish Ip20 Rated Real Lumen 2160 Lm With Efficacy 90 Lm/W. The Beam Angle To Be 120 Degrees. Led Life To Be 50,000 Hrs With L80/B20 Criteria. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. Inbuilt Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Provided
Supply, Installation, Testing and Commissioning of In Cove 12W/Meter 3000K Corner Led Profile With Opal Diffuser And Non Dimmable Driver. The Extruded Aluminium Anodized Corner Channel With Opal Polycarbonate Diffuser For Dotless Effect. Led Strip To Be Ip20 To Be Provided With All Mounting Accessories Real Lumen 1284 Lm (±50 Lm) With Efficacy ≥ 107Lm/W. The Distribution To Be 120 Degrees. Mac Adam Step ≤ 3 With Cri 80+ Led Life To Be 50,000 Hrs With L80/B20 Criteria. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer.
Supply, Installation, Testing and Commissioning of Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included. ( 10 Meter - 1 Driver )
Supply, Installation, Testing and Commissioning of Ip65 Rated Surface Mounted 10W 3000K Step Light Fitting With Inbuilt Driver. Ip66 Rated Die Cast Aluminium Housing With Clear Asymmetric Tempered Glass, Silicon Gaskets With All Ss Accessories. Real Lumen 340 Lm With Efficacy 34 Lm/W. The Beam Angle To Be Asymmetric. Mac Adam Step ≤ 3 With Cri 80+ Led Life To Be 50,000 Hrs With L80/B20 Criteria. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included.
Supply, Installation, Testing and Commissioning of Exterior Grade Ip67 Rated 14W 3000K Single Way Led Floor Grazer With Non Dimable Driver. High-Pressure Die Cast Aluminium Alloy Body And Components. Nano Ceramic Surface Conversion, Resistant To Corrosive Environment. Luminiare Primarily Coated With Epoxy Resin And Top Coated With Uv Stabilized Polyester Powder And Cured In Digital Temperature Controlled Chamber Self-Extinguishing High Impact Resistant Clear Polycarbonate Diffuser With Uv Stabilized Additive. High Performance Anodized Spun Aluminium Reflector. Post-Cured Treated Silicone Gasket. Temperature And Weather Resistant External Screws Are In Stainless Steel With Protection Grease. Cable Entry Protected By M20 Cable Gland. Ip67 And Ik 10 Rated Real Lumen 510 Lm ( ± 50 Lm) With Efficacy ≥ 36Lm/W. The Distribution To Be Wide Beam Led Life To Be 90,000 Hrs With L70/B10 Criteria. Mac Adam Step ≤ 3 With Cri 80+ In Built Non Dimable Driver With Power Factor More Than 0.95 And Thd Less Than 20%. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer.
Supply, Installation, Testing and Commissioning of Exterior Grade Ip66 Rated 10W Narrow Beam 3000K Led Fitting With Honeycomb Louvers And And External Non Dimmable Driver. Ip66 Rated The Optical Assembly Are Made Of Aisi 304 Stainless Steel With An Extra-Clear, Sodium-Calcium Tempered Glass Cover. Deep Recessed Led Source. Real Lumen 540 Lm ( ± 50 Lm) With Efficacy ≥ 90Lm/W. The Distribution To Be Medium Beam Led Life To Be 50,000 Hrs With L80/B20 Criteria. Mac Adam Step ≤ 3 With Cri 80+ The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included.
Supply, Installation, Testing and Commissioning of Ip67 Rated Recessed Ground 36W Linear Wall Washer Led Up Light With Inbuilt Driver. Protection Ip67 Ik Rating Protection Against Mechanical Impact Ik10 On Body And Optical Part.Luminaires Body Housing Extruded Aluminium S6063 Alloy Body With Low Copper Content.Luminaire Withstands A Maximum Static Load Of 1000 Kg.Coating Process Nano Ceramic Surface Conversion, Resistant To Corrosive Environment. Luminiare Primarily Coated With Epoxy Resin And Top Coated With Uv Stabilized Polyester Powder And Cured In Digital Temperature Controlled Chamber At 200°C. Diffuser Impact Resistant Safety Tempered Glass Cover. Able To Withstand The Temperature Up To 250°C. Glass Flushes To The Front Cover, No Accumulation Of Dust And Water. Lens Molded Pmma Lens From Renowned Manufacturers In Various Light Distribution Patterns. Gasket Post-Cured Treated Silicone Gasket. Temperature And Weather Resistant. Working Temperature -40°C To +200°C.External Screws External Screws Are In Stainless Steel With Protection Grease.Cable Entry Cable Entry Protected By M20 Cable Gland. To Be Used With H05Rn-F/ H07Rn-F Cable With 7-13Mm. Diameter.Led High Efficiency Led Module. Assembled On Fr4 And Mounted On To Heat Conductive Material.Driver High Quality Constant Current Led Driver. Conform To Safety Standard And Electromagnetic Compatibility Standard. Real Lumen 4370 Lm ( ± 50 Lm) With Efficacy ≥ 95Lm/W. The Distribution To Be Wall Washer Led Life To Be 50,000 Hrs With L80/B20 Criteria. Mac Adam Step ≤ 3 With Cri 80+ The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included.
Supply, Installation, Testing and Commissioning of Ip65 Rated Spike Mounted 12W 3000K Medium Beam Up Light With Visor And Inbuilt Driver. Ip65 Rated. Solid Aluminium Housing With Corrosion Safe High Grade Anodized / Pu Powder Coating. All Screws To Be 316 Stainless Steel. To Be Provided 4 Mm Toughened Glass. High Grade Brass Nickel Plated Ip68 German Gland. High Grade Silicon Free Anti Capillary Cable, The Visor To Be Aluminium Die Cast Attached To The Main Fitting. External Spike And Honeycomb Louvers To Be Provided. To Be Provided With Inbuilt Driver. Real Lumen 960 Lm ( ± 50 Lm) With Efficacy ≥ 80Lm/W. The Distribution To Be Medium Beam Led Life To Be 50,000 Hrs With L80/B20 Criteria. Mac Adam Step ≤ 3 With Cri 80+ The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included.
Supply, Installation, Testing and Commissioning of Exterior Grade Base Mounted Ip65 Rated 24W/Meter 13 X 33 Degrees 3000K Led With Clear Diffuser And Adjustable Brackets.. The Extruded Aluminium Anodized Channel With Clear Polycarbonate Diffuser For Best Effect. Led Strip To Be Ip65. To Be Provided With All Mounting Accessories Real Lumen 2160 Lm ( ± 50 Lm) With Efficacy ≥ 90 Lm/W. The Distribution To Be 13 X 33 Degrees Degrees. Mac Adam Step ≤ 3 With Cri 80+ Led Life To Be 50,000 Hrs With L80/B20 Criteria. The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. Adjustable Brackets To Be Provided
Supply, Installation, Testing and Commissioning of El08 : Ip66 Rated Base Mounted 100W Narrow Beam Led Projector With Non Dimmable Driver. Ip66 Rated Spotlight Designed To Use Warm White Cob Led Lamps And A Spot Optic. Can Be Installed At Ground Level, On Walls (Using Screw Anchors) And On Pole Mounting Systems. Consists Of An Optical Assembly, A Component Box, A Glass-Holding Frame And Bracket. The Optical Assembly Component Box And Glass-Holding Frame Are Made Of En1706Ac 46100Lf Aluminium Alloy And Subjected To A Multistep, Pre-Treatment Process, In Which The Main Phases Are Degreasing, Fluorozirconation (A Protective Surface Film) And Sealing (With A Nano-Structured Silane Layer). The Following Painting Stage Consists Of A Primer And A Liquid Acrylic Paint, Cured At 150°C, With A Highlevel Of Weather And Uv Ray Resistance. The 4 Mm Thick, Tempered, Sodium-Calcium, Closing Glass Is Colourless, Transparent And Comes Complete With A Seal. The Black 60 Shore A Silicone Seal Has Been Subject To A Post-Curing Treatment, In An Oven, For 4 Hours At 220 °C. The Glass Unit And Seal Is Fixed To The Frame With Silicone. The Product Comes Complete With A Warm White Colour, Monochrome Cob Led Circuit, An Optic With A 99.93% Super-Pure Aluminium Reflector With A Polished, Anodized Surface And Built-In Electronic Ballast. Galvanized Steel Ballast Holding Plate; Extraordinary Maintenance Is Simplified Thanks To Quick-Coupling Connectors Between The Control Gear And The Leds And Between The Control Gear And The Wiring Terminal Block. The Box And Rear Cover Are Made Of Painted Aluminium Alloy And Come Complete With Spacers And Captive Screws. The Spotlight Can Be Adjusted By ±115° In The Vertical Plane Using A Painted Steel Bracket, With A Graduated Scale Showing 10° Steps And Mechanical Stops To Guarantee Stable Aiming Of The Light Beam. Horizontal Aiming Is Performed Using The Holes And Slots In The Bracket. Access To The Optical Assembly Is Simple Thanks To A Nickel-Plated Brass Decompression Valve Which Eliminates The Product'S Internal Vacuum. Set Up For Pass-Through Wiring Using A Double M24X1.5 Nickel-Plated Brass Cable Gland (Suitable For Cables With 7÷16Mm Diameter). All External Screws Used Are Made Of A2 Stainless Steel And Are Of The Captive Type. The Luminaire Technical Characteristics Conform To En60598-1 Standards And Particular Requirements Real Lumen 9994 Lm ( ± 50 Lm) With Efficacy ≥ 108Lm/W. The Distribution To Be Narrow Beam ( 30 Degrees ) Led Life To Be 50,000 Hrs With L80/B10 Criteria. Mac Adam Step ≤ 2 With Cri 80+ The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included.
Supply, Installation, Testing and Commissioning of Ip66 Rated Recssed Wall 3W 3000K Led Step Light With In Built Driver. Ip65 Class Ik Rating Protection Against Mechanical Impact Ik08 On Body And Ik06 Optical Part.Luminaires Body Housing High-Pressure Die Cast Aluminium Alloy Body And Components.Wall Recessed Housing Made Of Gfr Polymer. Coating Process Nano Ceramic Surface Conversion, Resistant To Corrosive Environment. Luminiare Primarily Coated With Epoxy Resin And Top Coated With Uv Stabilized Polyester Powder And Cured In Digital Temperature Controlled Chamber At 200°C.Diffuser Impact Resistant Safety Tempered Glass Cover. Able To Withstand The Temperature Up To 250°C.Gasket Weather Resistant Silicone Gasket. Working Temperature -40°C To +200°C.External Screws External Screws Are In Stainless Steel With Protection Grease. Cable Entry Cable Entry Protected By Weather Proof Grommet. To Be Used With H05Rn-F/ H07Rn-F Cable With 6-13Mm. Diameter. Real Lumen 80 Lm ( ± 50 Lm) With Efficacy ≥ 14 Lm/W. The Distribution To Be Narrow Beam ( 50 Degrees ) Led Life To Be 50,000 Hrs With L80/B10 Criteria. Mac Adam Step ≤ 2 With Cri 80+ The Luminaire Shall Be With Following Certifications: Lm79 From Nabl Accrediated Lab Or From Manufacturer & Lm80 Issued By Led Manufacturer. Non Dimmable Bis Registered Driver With Pf ≥ 0.95 To And Thd ≤ 20% To Be Included.
Cast Iron Pole Light - Supply, Installationa, Testing and Commissioning of exterior grade ip66 rated 40w 2700k 4M pole led with non-dimmable driver. Square classical style fitting to be Cast Iron with clear pmma diffuser. The fitting to be rust and corrosion free. The pole to be single piece without any joints with Cast Iron housing. Led lamp to be E27 with 40W 1500LM 2700K. The fitting to be provided with concrete base mounting accessories. All hardware to be marine grade 316l. Light fitting sampleto be shown for mock up
Big Mashal Light - Supply, Installation, Testing and Commissioning of cast iron Mashaal-shaped wall-mounted lights, 1.8M tall and 0.30M wide, featuring a 15W LED torch with an Antique Brass Finish. The lights should be designed for 220V AC operation and should be delivered complete with all necessary fixtures and fittings. Ensure secure and sturdy mounting to the wall, with all electrical connections made safely and in accordance with relevant standards.
Small Mashal Light - Supply, Installation, Testing and Commissioning of cast iron Mashaal-shaped wall-mounted lights, 1.0M tall and 0.30M wide, featuring a 15W LED torch with an Antique Brass Finish. The lights should be designed for 220V AC operation and should be delivered complete with all necessary fixtures and fittings. Ensure secure and sturdy mounting to the wall, with all electrical connections made safely and in accordance with relevant standards.
Lanten Lights - Supply, Installation, Testing and Commissioning of cast iron Kandeel-shaped wall-mounted lights, 0.60M tall , featuring a 15W LED torch with an Antique Brass Finish. The lights should be designed for 220V AC operation and should be delivered complete with all necessary fixtures and fittings. Ensure secure and sturdy mounting to the wall, with all electrical connections made safely and in accordance with relevant standards.
84.24 KWP Solar System -Supply, Installation, Testing and COmmissioining of solar modules of type 585Wp Topcon bifacial (Non-DCR) panels from Renewsys or a reputed make. Each module to have an open circuit voltage of 53.27V, short circuit current of 13.93A, maximum power voltage of 43.74V, and maximum power current of 13.38A, with an efficiency of 22.68%. The installation must comply with industry standards to ensure optimal performance and reliability.Inverter 80KW, 3 Phase Specification Output power (continuous) at 25 deg * C = 80 KW Output frequency = 50Hz Output voltage = 400V AC AC connections = Three-phase Nominal voltage = 600 VDC Optimal operating temperature range = -30°C to 60°C Weight t = 79.5Kg Dimensions in n = 585 * 1065 * 363 (HXWXD) Quantity 1 Nos Make Solis/Reputed make Warranty: 10 years 1. Ingress Protection-60529(IP-66) 2. Utility Interface-61727 3. Anti-Islanding Protection-62116 4. Safety-62109-182 5. Efficiency Measurements-61683 6. Environmental-60068-2(1,2,14,30)A.C.D.B. AC side distribution box with SPD and 4 pole MCB 1 Nos. Reputed Make D.C.D. B DC side distribution box with SPD, DC fuses and DC MCB ,1 Nos. ,Reputed Make ,Remote Monitoring System Inverter inbuilt Rernote Monitoring over Ethernet or WIFI Communications ,As per design ,As per inverter make Cables ,Solar DC/Conventional AC cables UV resistant cable As per design Polycab/Kel
250KVA DG CPCBIV + Set Radiator Supply, INstallation, Testing and COmmissioning of 200 kW / 250 kVA, SILENT Diesel Generating Set with prime duty rating as per ISO 8528 with CPCB IV+ approved acoustic enclosure comprising of : “Cummins” Model QSB6.7G-23, Radiator Cooled, Diesel engine developing 306.9 BHP at 1500 RPM, complete with standard accessories, coupled to “Stamford” Alternator rated at 200 kW / 250 kVA at 415 Volts, mounted on Channel Iron Base Frame complete and 2 number 12 V Batteries. With Acoustic enclosure With Cummins standard controller with Fuel Tank of 395 Ltrs capacity Alternator Class H to temp rise limited to H @40Deg C ambient With New CPCB System 4. Including Diesel for Testing and Comissioning Minimum 500 Litres, Charges for RIO Permission/ Permission from Chief engineer electricals, Charges for necessary exhaust piping minimum 3.5 Meters as per CPCB/ GSPCB norms, Freight and Unloading with help of Crane
Supply of following size of 3 core, HV, 11 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off,inner sheath of PVC tape,galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments.3 Core 300 sq.mm
Supply of following size of 3 core, HV, 11 KV grade, ISI mark, XLPE cable with stranded compact circular aluminium conductor, conductor screened with extruded semiconducting compound, XLPE insulated, insulation screned with extruded semiconducting compound in combination with copper tape(0.3 KA for 1Sec.) cores laid off,inner sheath of PVC tape,galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS:7098(Part II) with latest amendments.3 Core 120 sq.mm
Supply and laying of 1 core upto 300 sq.mm. aluminium(as required at site ) XLPE insulated armoured 1.1KV power cable and carrying ISI MARK with all accessories & approved make of Goa electricity department. (For Connecting internal Transformer to LV Panel
Supply,Erection,Testing&commissioning of 11KVA Meter in gcubicle having 3Nos of P.T's and 3 Nos of C.T's having ratio ,class of accuracy and burden as required for the load. The C.T's, P.T's, meter ing cubicle should be MRT tested and as per the Design and approval ofMRTDiv- VII,Margao.Metering cubicle should be provided with a DLMS protocol adhering Trivector meter which is tested by MRT.The CTPT metering cubicle should be provided with the necessary concrete found ationmoun table structure.Onemetering cubiclewill be for theGEDmeteringand the other metering cubicle will be client side checkmetering cubicle.The necessary SCADA compatible accessories are also to be provided. The Cubicle should have 7 sealing arrangements as per MRT guidelines
Supplying and making Indoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required. (d) 11 KV, 3 Core x 240 - 300sq.mm
Supplying and making Indoor cable end termination with heat shrinkable kit for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable upto 11 KV grade, complete as required. (c) 11 KV, 3 Core x 120 - 185 sq.mm
Supply, Erection, testing&commissioning of 11KV, 3phase, Straight through joint kit ,heat shrinkable kitcomplete, for11KVXLPEcable of size 3 x 300- sq.mm including sockets/lugs/connectors etc. Make : 3 M/ Raychem.
Supply and Installation of Glanding and termination 1 core 300 sq.mm. aluminium XLPE insulated armoured 1.1KV power cable (For Connecting internal Transformer to LV Panel
Supply and erection of HDG earth ing strip with proper welding whereve rrequired and painting with redoxide paint at the portion of welding, drilling cutting etc. for connecting earthing pipe and other equipments of size 50 x 6 mm
Supply, Erection, testing&commissioning of 11KV, 630 Amps, Outdoor, motorised /non motorised , extensible /non extensible SF6 RingMainUnitwithtwoLoadBreakSwitches and one Circuit Breaker or with two Load Break Switches and two Circuit Breaker conforming to International Standards and complete with Fault Passage Indicator other accessories as required for Scada requirements of Goa electricity department & of approved makeofGoaelectricitydepartment.Make:Lucy /Siemens.
Supply, Erection, testing&commissioning of 11KV, 630 Amps, Outdoor, motorised /non motorised ,extensible SF6Ring Main Unit with One Siwtch and one Circuit Breaker conforming to International Standards and complete with Fault Passage Indicator other accessoriesasrequiredforScadarequirements of Goa electricity department & of approved make of Goa electricity department. Make:Lucy /Siemens.
Supplyand Installation of400KVAOutdoor type Transformer Copper wound 11KV/433V, DYn11,ONANtypeTransformerwithoffcircuit, tap changer having tapping range +5to-5%@ 2.5%(withtolerance), classF,asper IS-1180 withenergyefficient level-1,Amendment-4with DigitalWTI,OTI init.ThecableconnectionHT sideshall beby11KV3cx95SqmmXLPE aluminiumcableandLTSideshallbe1.1KV4 No. 3.5C x 185 Sq. mm. XLPE AL cable
Supply ,erection ,testing&Commissioning of Cable route Marker
Supply ,erection ,testing&Commissioning of DLMS protocol meter
Providing of fencing for the sub station yard ,fencing will be provided with MS angles duly painted of 50 x 50 x 5 mm at , angles , falts and chain link mesh. The fencing will be provided with 2 mts wide entrance door.Fencing height will be 2 mts
Supply and erection of enamelled danger board of 11 KV
Preparation of all drawings /slds/ Files for Govt Department for obtaining necessary approvel fromRIOElectricitydepartment,MRT margao etc. for of the scheme and releasing connection including submission of all documents by obtaining signature fromfrom concernedauthoririesindrawingsandfilesand submissionofnecessary test report andother documents to RIO and Electricity Department
Supply and installation of fire safety buckte with sand etc as required
supplyandinstalaltionof fireextinguisherCO2 type with base 4K go rmorecy linder along with holder on wall surface etc as required
Supply and fixing first aid kits etc as required
Supplyand laying shockproof rubbermat of size 2 mtrs x 1 mtr x 2mm etc as required
Supplyand fixing firebucket stands suitable for installaltion of two or more fire safety buckets etc as required
PASSENGER LIFT (Shaft:2060X1850) - Supply, Installation, Testing and Commissioning of the following with machine room elevators having 4 stops / 4 landing (STILT to Terrace floor) and all door opening on same side having approx. 13.5 mtr travel, speed of 2.0 mtr/sec speed, and with variable voltage variable frequency (VVVF) drive, microprocessor based control system, automatic rescue device, anti-failure system , car and center opening power door,having headroom height maximum up to 4550 mm with emergency light and alarm, intercom telephone , position indicator,direction indicator in the car and on all floors. The control system has to be provided with necessary soft/hard points capable of connecting to building automation system.
STATUE PASSENGER LIFT (Shaft:2000X1500) - Supply, Installation, Testing and Commissioning of the following with machine room elevators having 2 stops / 2 landing (STILT to Terrace floor) and all door opening on same side having approx. 6.15 mtr travel, speed of 2.0 mtr/sec speed, and with variable voltage variable frequency (VVVF) drive, microprocessor based control system, automatic rescue device, anti-failure system , car and center opening power door,having headroom height maximum up to 4550 mm with emergency light and alarm, intercom telephone , position indicator,direction indicator in the car and on all floors. The control system has to be provided with necessary soft/hard points capable of connecting to building automation system.
LV Works
Supply, Laying, Testing and Commissioning of Campus Fiber Cable, Loose Tube Singlmode 9 / 125 micron, 12 Fiber, Armoured - Uni-Tube Design. The cable is to be laid in suitable sized HDPE pipe through out under ground / wall / ceiling.
Supply, Laying, Testing and Commissioning of Campus Fiber Cable, Loose Tube Singlmode 9 / 125 micron, 24 Fiber, Armoured - Uni-Tube Design. The cable is to be laid in suitable sized HDPE pipe through out under ground / wall / ceiling.
Supply, Connecting, Testing and Commissioning of Modular Fiber distribution unit (FDU) 12/24 - port -RACK/WALL MOUNT- 1U Type - Unloaded (For more than 24 core termination, use multiple FDU) The rate shall include all the splicing work of fibre cable required.LIU For 12 core
Supply, Connecting, Testing and Commissioning of LIU. The rate is inclusive of all fibre core splicing work required.LIU for 24 core
Supply, Connecting, Testing and Commisisoning of Blank Adaptor strip for all the above FDU Duplex type
Supply, Connecting, Testing and Commisisoning of Blank Adaptor strip for all the above FDU Simplex type
Supply, Connceting, Testing and Commisisoning of SM SC Duplex / LC Fiber Patch Cord, 3M
Supply and Installation of 3 Mtr. Octagonal pole with inbuilt control box in it with lockable arrangement, GI bracket to install PTZ camera and the FDU above the pole, wire way from ground to this box from inside the pole, foundation work, anchor faster and foundation bolts to install the pole, etc. complete.
Supply, Connceting, Testing and Commisisoning of SM SC Duplex / LC Fiber Patch Cord, 3M
Supply and Installation of 3 Mtr. Octagonal pole with inbuilt control box in it with lockable arrangement, GI bracket to install PTZ camera and the FDU above the pole, wire way from ground to this box from inside the pole, foundation work, anchor faster and foundation bolts to install the pole, etc. complete.
Supply, Installation, Testing and Commissioning of 24 U Rack with the Fan and necessary Hardware
Supply, Installation, Testing and Commissioning of 9U Rack with Fan and necessary Hardware
Supply, Installation, Testing and Commissioning of 6U Rack with Fan and necessary Hardware
Supply, Installation, Testing and Commissioning of Layer 3 switch with 24 # Unpopulated miniGBIC SFP Slots and 8 # 10/100/1000 Base T Ports (Shared), AC power supply
Supply, Installation, Testing and Commissioning of single SFP with 24-port 10/100 Base TX Layer 2 SNMP-managed Standalone POE switches
Supply, Installation, Testing and Commissioning of single SFP with 8-port 10/100 Base TX Layer 2 SNMP-managed Standalone POE switches
Supply, Installation, Testing and Commissioning of single SFP with minimum UTP feeder port standalone POE switches with outdoor IP-65 housing to accommodate FDB and this switch and all wiring in it.
Supply, Installation, Testing and Commissioning of Dual stream Day & Night Network IP 3 MP dome camera.
Supply, Installation, Testing and commissioning of Dual stream Network High speed Pan, Tilt and zoom (PTZ) dome camera including 1 Port PoE injector with 48VDC/0,7A output. The camera will be included with IP 55 outdoor type weather proof SS casing box and its all hardwares to install the same including brackets etc..
Fire Fighting Works
Supplying, installation, testing and commissioning of Main Fire Pump (MFP / EP) suitable for water discharge of 2280 LPM/ 137 CuM/Hr at 80 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 45 kW capacity for manual/ automatic operation and consisting of following: (a) Horizontal type, single stage, centrifugal/ split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts, matching hardware, matching suction & delivery flanges/ gaskets, etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete. Pump shall be BMS Compatible.
Supplying, installation, testing and commissioning of main fire pump suitable for water discharge of 2280 LPM at 80 m head driven by 60 HP or suitable HP capacity diesel engine at 2000 RPM working speed suitable for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150 ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete. Pump shall be BMS Compatible.
Supplying, installing, testing & commissioning of fabricated Diesel Engine Pump Fuel Oil Day Tank from 3 mm MS sheet and 24G secondary containment as per IS:2552 of 300 liters gross capacity & 250 liters fill capacity, externally painted with two coats of synthetic enamel paint over a coat of primer & internally with oil resistant paint. The tank shall be fitted with clear glass oil level indicator, inspection hole with cover, drain valve, air vent including structural supports (painted with approved shade) for tank and fill/ return/ drain connection valves, etc.
Providing & fixing, joining & testing, of heavy class-C M.S pipe IS:1239 marked in exhaust line of 100 mm dia. Diesel pump set, including cutting, welding etc. with MS butt welded fittings, providing clamp sand proper positioning of silencer and expansion bellows with nut-bolts as required, painting the finished pipeline with heat resistant Aluminum paint and providing lagging with 50 mm thick glass wool duly secured with chicken mesh and wire.
Supplying, installation, testing and commissioning of jockey fire pump suitable for water discharge of 180 LPM at 80 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW capacity for manual/ automatic operation and consisting of following : (a) Horizontal type, multi stage, end suction, back pull out, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete. Pump shall be BMS Compatible.
Supplying, installing, testing & commissioning of GI ERW of 200 mm dia. pipe as per IS:3589, Grade FE410, including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes.
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. 150 mm dia
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. 100 mm dia
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. 80 mm dia
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C', including all fittings. including fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. 50 mm dia
Supplying, installing, testing & commissioning of Red Oxide primer (10 SqM per Ltr 25 micron DFT). For above ground piping, Application of including provision of hand tool for surface cleaning & brush for application of primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge.
Supplying, installing, testing & commissioning of Synthetic enamel finish paint shade 536 in IS 5 (13.5 sqM per Ltr-25 micron). For Above ground piping. Brush for application of final paint compatible with primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge.
Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge. 200 mm dia.
Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge. 150 mm dia.
Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge. 80 mm dia
Supplying, installing, testing and commissioning of Rubber Expansion Bellows of following sizes for water media, EPDM/ Nitrile material, flange connection, dual arch, suitable for up to 70 deg C temp., Axial/ Lateral/ Torsional- flexibility, pressure range-16 Mpa including nuts, bolts and washers complete as required. complete as directed & specified as per the direction of engineer in charge. 50 mm dia.
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID. 200 mm dia
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID. 150 mm dia.
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID. 100 mm dia.
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID. 80 mm dia.
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN 16 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 593 of following sizes. including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID. 50 mm dia.
Supplying, installing, testing & commissioning of double flange Non Return Valve PN 16 class of following sizes Conforming to IS: 5312 (Part-I), Universal mounting (Hroz/ Vert) having CI to IS 210Gr260 Body and Bronze IS318 Gr LTB Disc with nut bolts to IS 1363 PT1 Class 4.6, Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc. and tested to 1.5 times of working pressure in an approved manner, with tag nos as per P & ID. 150 mm dia.
Supplying, installing, testing & commissioning of double flange Non Return Valve PN 16 class of following sizes Conforming to IS: 5312 (Part-I), Universal mounting (Hroz/ Vert) having CI to IS 210Gr260 Body and Bronze IS318 Gr LTB Disc with nut bolts to IS 1363 PT1 Class 4.6, Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc. and tested to 1.5 times of working pressure in an approved manner, with tag nos as per P & ID. 100 mm dia.
Supplying, installing, testing & commissioning of double flange Non Return Valve PN 16 class of following sizes Conforming to IS: 5312 (Part-I), Universal mounting (Hroz/ Vert) having CI to IS 210Gr260 Body and Bronze IS318 Gr LTB Disc with nut bolts to IS 1363 PT1 Class 4.6, Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc. and tested to 1.5 times of working pressure in an approved manner, with tag nos as per P & ID. 50 mm dia.
Supplying, installing, testing & commissioning of PN 16 Cast Iron, factory made, flanged Y type strainer of 200 mm NB with SS 304 strainer having 3 mm holes with companion flange set of 2 flanges to IS 1538 and including welding of matching flange BS 10 Table D & providing fasteners to IS 1363 grade 5.6/8.8 & rubber gaskets to IS 2172 grade W/3 with standard OAR (open area ratio) for positive suction complete.
Supplying and installing Air Vessel of 300 mm dia and 1.5 mtr. in height M.S. Tank fabricated from M.S. black ERW pipe, conforming to I.S.: 3589, having 6 mm thickness, dish end at both ends, duly welded with 300 mm dia pipe, having inlet of 100 mm dia, duly fitted with 100 mm dia sluice valve and 20/25 mm dia draw in with G.M. gate valve, to be installed inside pump house along with provided M.S. angle (75 x 75 x 5 mm) tripod.
Supplying, installing, testing & commissioning of GM body and inlet in CI, 2 way Fire Brigade connection with NRV of 7 kG/cm2 working pressure and test pressure 10.5 kG/cm2, Header of 100 mm dia, M.S. ‘C’ class pipe having 2 Nos. of 100 mm manifold for outlets with built in spring loaded NRV & 100 nb butterfly Isolation valve with 100 mm dia flange, fitted with 2 nos. of 63 mm diameter instantaneous male inlet connection is provided at street level and connected to Fire UG tank for draw out connection, complete with Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc
Supplying, installing, testing & commissioning of GM body and inlet in CI, 4 way Fire Brigade Inlet connection with NRV of 7 kG/cm2 working pressure and test pressure 10.5 kG/cm2, Header of 150 mm dia, M.S. ‘C’ class pipe having 4 Nos. of 150 mm manifold for outlets with built in spring loaded NRV & 150 NB butterfly Isolation valve with 150 mm dia flange, fitted with 4 nos. of 63 mm diameter instantaneous male inlet connection is provided at street level and connected to Fire UG tank for fill the tank, complete with Matching flanges to BS 10 Table D, Gaskets & Body ring Nitrile to IS:638 Type B, fasteners, etc
Supplying, installing, testing & commissioning of UL/ FM approved Pressure Gauge of 100 mm dia., liquid filled 0-10 bar. Fitted with 15 mm dia. root cock valve, and G.I. pipe, elbow, snubber, process piping etc. as per requirement in an approved manner.
Supplying, installing, testing & commissioning of UL/ FM approved Pressure Switch for pump control with 2 NO + 2 NC contacts, 12/15 mm dia. process connection for 3Cx1.5 sqmm cable, operation range 0-10 bar, with 12/15 mm dia. root valve, G.I. nipple, elbow, snubber, process piping etc. in an approved manner.
Supplying & installing of ABC Powder Cartridge Portable Fire extinguisher 6 kg capacity (21B), 35 bar Test / 15 Bar working, 4.5 M throw, 20 second discharge time, Propellant CO2 in gas cartridge, charge as per IS 4308, MS sheet deep drawn steel cylinder, sqeeze grip brass control valve, AL syphon tube, Non metallic discharge nozzle, 450 mm long PVC braided hose, pressure gauge, hose holder, conforming to IS 15683 / IS 2190:2010, portable at appointed location on wall/ column mounted brackets, clamps & other accessories.
Supplying & erecting of CO2 type extinguisher, 4.5 kg capacity (21B), 250 Bar Test / 60 Bar storage, 2M min throw, 12 second discharge time, Propellant CO2 in gas cartridge, charge as per IS 15222, Seamless steel tube cylinder to IS 7285, sqeeze grip brass control valve to IS 3224, AL internal discharge tube, Poly Ethylene discharge nozzle, 450 mm long PVC braided hose, safety release, seal temper indicator, pressure gauge, hose holder & conforming to IS 15683 /IS 2190:2010. portable at appointed location on wall/ column mounted brackets, clamps & other accessories.
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 core 35 sq.mm
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 1.5 Sq.mm
Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 4 Sq.mm
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 1.5 Sq.mm
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 6 Sq.mm
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct, etc. complete as required
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 x 4 sq.mm
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 3 x 35 sqmm
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 4 x 1.5 sqmm
Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300 mm width 50 mm depth
Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 300 mm width 50 mm depth
Supplying and Installing following size perforated type , M.S.cable tray bends of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. 150 mm width 50 mm depth
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications 150 mm dia
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications 100 mm dia
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications 80 mm dia
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications 25 mm dia
For underground, Fabrication of pipe in lengths to suit site condition & welding after bevelling pipes & using 3.15 mm electrode for root run & 2.5 mm for subsequent runs including taking & grinding including all fittings & providing rectifier welding machines with approved make electrodes, underground erection in excavated pipe trenches at 1M hydrotesting at 1.5 x working pressure before wrap coat & commissioning after 100% length holiday testing & radiography of 10% insitu joints subject to minimum 1. Refer Technical Specifications 150 mm dia
For underground, Fabrication of pipe in lengths to suit site condition & welding after bevelling pipes & using 3.15 mm electrode for root run & 2.5 mm for subsequent runs including taking & grinding including all fittings & providing rectifier welding machines with approved make electrodes, underground erection in excavated pipe trenches at 1M hydrotesting at 1.5 x working pressure before wrap coat & commissioning after 100% length holiday testing & radiography of 10% insitu joints subject to minimum 1. Refer Technical Specifications 100 mm dia
For underground, Fabrication of pipe in lengths to suit site condition & welding after bevelling pipes & using 3.15 mm electrode for root run & 2.5 mm for subsequent runs including taking & grinding including all fittings & providing rectifier welding machines with approved make electrodes, underground erection in excavated pipe trenches at 1M hydrotesting at 1.5 x working pressure before wrap coat & commissioning after 100% length holiday testing & radiography of 10% insitu joints subject to minimum 1. Refer Technical Specifications 80 mm dia
Supplying, installing, testing & commissioning of Bituminous Primer (200 gms/SqM). For under ground piping. Application of including provision of hand tool for surface cleaning & brush for application of primer.
Supplying, installing, testing & commissioning of 2 mm thick tape to IS 10221 App B, tar based polymeric mix based on high tensile strength HMHDPE thermofusible material in 500 mm width. For Under ground piping. Application of including provision of LPG gas in cylinders & nozzle with piping, wrapping in 2 layers in oppostite direction with 15% overlap & thermal fusing in situ.
Supplying, installing, testing & commissioning of Red Oxide primer (10 sqM per Ltr 25 micron DFT). For above ground piping, Application of including provision of hand tool for surface cleaning & brush for application of primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge.
Supplying, installing, testing & commissioning of Synthetic enamel finish paint shade 536 in IS 5 (13.5 sqM per Ltr-25 micron). For Above ground piping. Brush for application of final paint compatible with primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge.
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN10 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 5155 of following sizes, including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID. Refer Technical Specifications 150 mm dia
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN10 class, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 5155 of following sizes, including provision & welding of matching flange to BS 10 Table D, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID. Refer Technical Specifications 100 mm dia
Supplying, installing, testing & commissioning of forged brass 20 mm dia. Air Release Valve, 8.8 bar System pressure, full bore, forged brass body/ Chamber/ Cover- IS 6912 Gr. FLB, Float/ Lock/ Hinge/ Pin- Polypropylene, Spring SS304, Ring-Nitrile, Strainer-Plastic and with tag nos as per P & ID. Refer Technical Specifications
Supplying & erecting of bronze Ball Valves of 25 mm dia., full bore, two pieces, Quarter turn, Mild Steel lever operated with tag nos as per P & ID. Refer Technical Specifications
Supplying, installing, testing & commissioning of wall/ column/ ground mounted Outdoor/ Indoor Hose Cabinet of 16 gauge, CRCA sheet of 450mm x 450mm ht x 250mm suitable to house 1 no, 15 M hoses, branch pipe and nozzle with 4 mm thick glass visor, industrial key lock, chrome plated double leaf door handles, internal 2 coats of synthetic enamel white paint in 25 micron DFT each & 2 coats external synthetic enamel paint of 25 micron DFT in shade 536 of IS 5. The work includes Fabration & erection of ground mounted back frame steel structure or wall mounted with painting as also support grouting as per the site condition @ installing so that bottom of box is 900 mm above ground. Refer Technical Specifications
Supplying, installing, testing & commissioning of SS Twin Headed Hydrant Valve, oblique type double outlet, with a flow of 900 LPM @ 7 bar flow having 63 mm instantaneous female coupling outlet & fitted with accessories of cap, chain etc. to IS 5290. Double outlet hydrants on 80 nb @ height of 1.2 M above ground including providing & welding of matching flange to BS 10 Table F,providing fasteners to IS 1363 grade 5.6/8.8 & rubber gaskets to IS 2172 grade W/3. Refer Technical Specifications
Supplying, installing, testing & commissioning of SS Single Headed Hydrant Valve, oblique type single outlet, with a flow of 900 LPM @ 7 bar flow having 63 mm instantaneous female coupling outlet & fitted with accessories of cap, chain etc. to IS 5290. Single outlet hydrants on 80 nb @ height of 1.2 M above ground including providing & welding of matching flange to BS 10 Table F,providing fasteners to IS 1363 grade 5.6/8.8 & rubber gaskets to IS 2172 grade W/3. Refer Technical Specifications
Supplying & installing wall mounting Swinging type Hose Reel Drum complete with hub, sides-powder coated finish in red, wall bracket made out of 16 guage CRCA sheet fitted with 19 mm dia, 30 m long rubber tubing confirming to IS 444 with 24 LPM flow & 6 M throw SS 304 jet nozzle to IS 8090 fitted with SS shut off valve to IS 778, fitted in wall/ structure as the case may be with fabration & erection of ground/ floor/ wall/ column mounted steel structure with painting.Refer Technical Specifications Ball Valves of 25 mm dia., are included in item no. 9 .25 mm NB pipe included in piping item.
Supplying, installing, testing & commissioning of RRL hose pipes 63 mm dia, 15 m in length, Type-A, reinforced rubber lined, to IS 636 complete with male female instantaneous copper wire bound coupling of 63 nb size in SS 304 conforming to IS 903. hoses in external/ internal hose cabinet.
Supplying, installing, testing & commissioning of SS 304 branch pipe of 63 mm x 42.5 fitted & to IS 903 with SS 304 Jet nozzle with 42.4 mm x 20 mm size having 6 M throw & to IS 903. branch pipe in external/ internal hose cabinet.
Supplying, installing, testing & commissioning of GM body and inlet in CI, 4 way Fire Brigade connection with NRV of 7 kG/cm2 working pressure and test pressure 10.5 kG/cm2, Header of 150 mm dia, M.S. ‘C’ class pipe having 4 Nos. of 150 mm manifold for outlets with built in spring loaded NRV & 150 nb butterfly Isolation valve with 150 mm dia flange, fitted with 4 nos. of 63 mm diameter instantaneous male inlet connection is provided at street level and connected to Hydrant water header.
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications. 100 mm NB
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications. 80 mm NB
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications. 65 mm NB
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications. 50 mm NB (threaded fittings)
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications. 40 mm NB (threaded fittings)
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications. 32 mm NB (threaded fittings)
Supplying, installing, testing & commissioning of GI ERW following pipes, IS 1239 Part-1, Heavy duty, Class `C',For Above ground - fabrication of pipe in lengths to suit site condition & welding including providing rectifier welding machines with approved make electrodes, all fittings & above ground erection in shaft/ along the wall/ column, duly clamped with M12 U bolts on vertical or horizontal runs & hydrotesting at 1.5 x working pressure and commissioning after painting with flow directions marking on pipes. Refer Technical Specifications. 25 mm NB (threaded fittings)
Supplying, installing, testing & commissioning of Red Oxide primer (10 SqM per Ltr 25 micron DFT). For above ground piping, Application of including provision of hand tool for surface cleaning & brush for application of primer in 2 coats each of 25 micron DFT, satisfaction of Engineer-in-Charge.
Supplying, installing, testing & commissioning of Synthetic enamel finish paint shade 536 in IS 5 (13.5 sqM per Ltr-25 micron). For Above ground piping. Brush for application of final coat compatible with primer in 2 coats each of 25 micron DFT.
Supplying, installing, testing & commissioning of Pendant/ Upright / Recessed, UL/FM certified, SRSC sprinklers, chrome finish, K-factor 80 @ 0.5 bar (2.25 LPM @ 84 SqM), Temperature 58 Deg C, 4.5M x 4.5M, 1/2" NPT, including olet fittings & rosette plates. Refer Technical Specifications
Supplying, installing, testing & commissioning of 150 mm dia. constant pressure Alarm Valve UL listed, flange x flange, suitable for vertical installation on Sprinkler riser, Housing/ Cover/ Clapper Ductile Iron, Seat SS, Gaskets/ Seat EPDM, body flanges drilled to ANSI 16.5 # 150 complete with hydraulic & alarm trim with matching flanged drilled to complete with Test & Alarm trim & providing & welding of matching flanges to BS10 Table D, providing fasteners to IS 1363 grade, 5.6/8.8 & rubber gaskets to IS 2172 grade W/3.
Supplying, installing, testing & commissioning of Lever operated Leak Proof Wafer type C.I. Butterfly Valve PN10 class of 150 mm dia, with CI260/SGI IS 1865-400/15 Body & seat, EPDM Body lining, SS IS 6603 Gr12 Cr 12 shaft, conforming to IS 13095 / BS 5155, including provision & welding of matching flange to BS10 Table F, providing fasteners to IS nut bolts to IS 1363 PT1 Class 4.62, gaskets to IS 638 Type 2, with tag nos as per P & ID.
Supplying, installing, testing & commisssioning of insertion type vane Flow Switch UL listed pipe insertion type suitable for 30 bar pressure for velocity up to 6 M/Sec, trigger flow of 15 LPM with IP 55 switch box having 2 SPDT contacts rated at 1.5 A, 24 V DC. complete with all accessories.
Supplying, installing, testing and commissioning of Test and Drain valve of 50 mm dia threaded brass body, ball type, suitable to k-factor 80, sight glass, between sprinkler header & 50 mm dia. drainage line including piping connections, cutting, threading etc, complete as required.
Supplying, installing, testing & commissioning of Braided SS Flexible Sprinkler drops 1200 mm with 1" inlet nipple BSPT, 1/2" outlet reducer BSPT, 700 mm square support bar & bracket, complete & UL listed.
Supplying, installing, testing & commissioning of forged brass 20 mm dia. Air Release Valve, 8.8 bar System pressure, full bore, forged brass body/ Chamber/ Cover- IS 6912 Gr. FLB, Float/ Lock/ Hinge/ Pin- Polypropylene, Spring SS304, Ring-Nitrile, Strainer-Plastic.
Supplying & erecting of bronze Ball Valves of 25 mm dia., full bore, two pieces, Quarter turn, Mild Steel lever operated.
Supplying & installing of ABC Type Fire Extinguisher Cap. 6 kg Filled with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Type, UGTS Pressure Gauge, Discharge Time 24 Sec, Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge is 92%, applicable on Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn & CO2 Mig welded, EPDM Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester Powder coating (UV Resistant), Brass forged valves with safety Pin is of SS material, Made up from 2mm thick sheet, ISI Approved IS 15683:2018.
Supplying & installing of CO2 High Pressure Portable 4.5 kg Fire Extinguisher, filled with Co2 Gas as per IS 15222, Control discharge mechanism fitted with 1 Meter Wire Braided Hose & Flat Horn with Diffuser Nozzle for dispersed discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%, Applicable on Class B, C and electrically started Fire, Fire Rating 55B, Internal coating is not applicable & External coating is of enamel spray painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI mark, Body confirms to IS 7285 and PESO APPROVED, Extinguishers confirmed to IS 15683:2018 and ISI marked.
Supplying & installing of Mechanical Foam type 45 ltr. Fire Extinguisher filled with AFFF Foam (6%), Applicable fire class A&B, Controllable Discharge mechanism, Discharge Time min. 30-160 Sec, Jet Range 9 Meters, Average Discharge is 95%, Fitted with EPDM Hose with SS spring of 300mm to avoid kink (4 meter long) & Air aspirated Nozzle, CO2 gas Cartridge of 300 grams. Confirms to IS 4947, External Pure polyester (UV Resistant) and Internal Epoxy polyester powder coated, Brass forged cap, and Welding Procedure approved by TPI with 6G certification. Confroms to IS 16018:2012,Fire rating 20A:233B
Supplying & installing of Mechanical Foam stored pressure type 9 ltr. Fire Extinguisher filled with AFFF Foam confirms to IS 4989 (Part-II). Applicable fire class A & B, UTGS Pressure Gauge, Discharge Time 35 Sec, Controllable discharge mechanism, Jet Range 7 Meters, Average Discharge is 95%, Fire Rating- 4A:144B, Can Construction : Deep drawn & CO2 Mig welded, Controllable discharge mechanism with EPDM Hose & Air aspirated Nozzle, External Pure polyester powder coated (UV resistant) and Internal Plastic lining, Brass forged valves with safety Pin is of SS material, Made up from 2 mm thick sheet, As pe IS 15683:2018 and ISI Marked.
Supplying & installing of Automatic type 10 kg Fire Extinguishers UL listed FE-36 (HFC-236 fa) gas which is Electrically nonconductive, non corrosive, colorless and non-residual clean agent Suitable for Class A, B, C, and electrical fires approved with US EPA (Environmental Protection Agency), listing under USA Signification New Alternative Policy ( SNAP ) & also approved by UL, compliant with ASTM -D6541-11. FE-36 Fire Extinguishers having Zero Ozone Depletion Potential (ODP), low toxicity, also its replacement for Halon 1211, Halon 1201, UGTS Pressure Gauge, Made up from 2 mm thick sheet, Body Construction Deep Drawn with MIG Welding technology, External Pure polyester and Internal Epoxy polyester powder coated, Brass forged sprinkler valves, Heat Sensitive Glass bulb of 68 ° C. Area covered will be 8 m2 and volume of coverage is 10 m3. (For Server Room)
Earthwork in excavation in foundation pipeline trenches, drain in saturated soil upto a depth of 0.6m lift upto 1.5 m including shoring strutting, pumping/ bailing out water ,stacking the excavated soil not more than 5m clear from the edge of the excavation and returning the stacked soil in 0.15 m layers when required into plinth sides of foundation, etc. consolidating each deposited layer by ramming and watering and disposing of all surplus excavated soil within a lead upto 20 m.
Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.
Constructing RCC pedestal for above ground piping (top above 0.45m from GL), including excavation, PCC, Concrete, shuttering, plastering above ground, steel, ISMC 150 on top of concrete pedestal, backfilling and complete as per drawing & engineer.
Supplying, fabricating & installing of M.S. Support, for MS piping supported on Brick/ Concrete compound wall consisting with suitable size of mild steel angles, channels, flat plate, nut bolts etc..along with anchor, rod, etc. complete as per drawing & engineers instructions. The design shall consider span, weight of water filled pipe, cantilever arm etc. The structure shall be painted with 1 coat primer & 2 coats MIO & Final coat as explained elsewhere under painting.
Supplying, installing, testing & commissioning of UL listed analogue addressable false ceiling/ flush on roof slab mounted Multi-Sensor Photoelectric Smoke Detector 1.63%/ft to 13 %/ft sensitivity 8 level setting cum heat smoke detector 630 C fixed element, 24V DC 300μA quiescent & 6.5 mA operated, status LEDs, Rotary switch/DIP switch addressing including with mounting base wiring box, all cabling, glands & terminations, complete. Refer Technical Specifications
Supplying, installing, testing & commissioning of UL listed loop powered bidirectional Fault Isolator preferably detector base mounted, 20.5 V DC, 600 μA quiescent & 800 mA in fire conditions, installation on addressable loop after every 15 detectors/ devices for isolating shorted, dewired and loose circuits between two successive fault isolators with automatic resetting arrangement complete with base wiring box with cable glands, base etc. Refer Technical Specifications
Supplying, installing, testing & commissioning of Analogue Addressable UL listed Manual Pull Station/ Break Glass Unit, loop powered, 22V DC operating current, 600μA quiescent current with facility to programme the device from 01-159 with the help of dip/ rotary switches, complete with IP 24 housing with gland, Status LED for polling / fire condition etc.as required,Rotary switch/DIP switch hardware addressing installed in recess/ wall/ column including all cabling & terminations & glands Refer Technical Specifications
Supplying, installing, testing & commissioning of UL listed analogue addressable loop powered Control Module 20.5 V DC min , 700 mA operated & 600 μA quiescent, rotary/ dip switch hardware address setting, installed in recess/ wall/ column including all cabling & terminations & base wiring box. Refer Technical Specifications
Supplying & installing of 2 pair Loop Data Cable 300/500V, stranded annealed tinned copper, 7/0.53mm, 1.5 Sqmm, PVC insulation type C of IS 5831, Mylar backed aluminum screened with 25% overlap & 100% screen Inner extruded ST-2 sheath, single armoured, PVC St-2 extruded outer sheath with FRLS, to BS 5308. Refer Technical Specifications
Supplying, Configuring in Software of 2 core, 1.5 Sqmm Control Cable, 0.433 kV, 1.1kV for Modules to Devices. Refer Technical Specifications
HVAC Works
Supply, installation, testing and commissioning of INVERTER TYPE HI WALL Split A.C. with R410/R-32 refrigerant, complete with following component. Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, LCD wireless remote control, aerodynamically balanced blower. The unit should have air filter. Exposed units & grills will be aesthetically finished with powder coating of specified colour. 1.5 TR
Supply, installation, testing and commissioning of INVERTER TYPE HI WALL Split A.C. with R410/R-32 refrigerant, complete with following component. Out door Unit should have Inverter Compresser, high efficiency finned tinned condensors. Fins should be with anti corrosive coating with all electrical accessories ready for connection to incoming cable. The entire unit shall be in a weather proof, powder coated body & installed on suitable stand as per location. Unit should be charged with necessary refrigerent gas & oil. The indoor units will be complete in all respect including filter, LCD wireless remote control, aerodynamically balanced blower. The unit should have air filter. Exposed units & grills will be aesthetically finished with powder coating of specified colour.2.0 TR
SITC Inline Exhaust air fan along with Cowl piece, Bird Mesh Screen, Rain Cowl, Louvers as applicable- G.S.S.- and with volume control damper and necessary connection along with accessories. Providing starter panel, Incoming & Outgoing Switchgear / Push button of OEM recommended sizes, inbuilt -protection against O/L, S/C, Indicating lamps, NO-NC contacts. Copper conductor power cabling from starter panel to fan including supply & fixing of plug top if required. Cost is inclusive of both end termination using copper lugs & single compression Brass gland. (Avg. Cable Length 10 Rmt.) (Fan Static Pressure-100 Pascal) 360 cfm
SITC Inline Exhaust air fan along with Cowl piece, Bird Mesh Screen, Rain Cowl, Louvers as applicable- G.S.S.- and with volume control damper and necessary connection along with accessories. Providing starter panel, Incoming & Outgoing Switchgear / Push button of OEM recommended sizes, inbuilt -protection against O/L, S/C, Indicating lamps, NO-NC contacts. Copper conductor power cabling from starter panel to fan including supply & fixing of plug top if required. Cost is inclusive of both end termination using copper lugs & single compression Brass gland. (Avg. Cable Length 10 Rmt.) (Fan Static Pressure-100 Pascal) 250 cfm
SITC Inline Exhaust air fan along with Cowl piece, Bird Mesh Screen, Rain Cowl, Louvers as applicable- G.S.S.- and with volume control damper and necessary connection along with accessories. Providing starter panel, Incoming & Outgoing Switchgear / Push button of OEM recommended sizes, inbuilt -protection against O/L, S/C, Indicating lamps, NO-NC contacts. Copper conductor power cabling from starter panel to fan including supply & fixing of plug top if required. Cost is inclusive of both end termination using copper lugs & single compression Brass gland. (Avg. Cable Length 10 Rmt.) (Fan Static Pressure-100 Pascal) 100 cfm
Supply,Installation, testing & commissioning of Air Distribution Products of the following types complete with all accessories mentioned With all fittings for installation in GI. Supply,Installation, testing & commissioning of Aluminium Powder Coated Louver for fresh Air
Supply,Installation, testing & commissioning of Air Distribution Products of the following types complete with all accessories mentioned With all fittings for installation in GI.Supply,Installation, testing & commissioning of Aluminium Powder Coated Louver for fresh Air .Supply,Installation, testing & commissioning of Aluminium Powder Coated Louver for fresh Air. 4 inch
Supply,Installation, testing & commissioning of Air Distribution Products of the following types complete with all accessories mentioned With all fittings for installation in GI.Supply,Installation, testing & commissioning of Aluminium Powder Coated Louver for fresh Air .Supply,Installation, testing & commissioning of Aluminium Powder Coated Louver for fresh Air 6 inch
Supply,Installation, testing & commissioning of Air Distribution Products of the following types complete with all accessories mentioned With all fittings for installation in GI.Supply,Installation, testing & commissioning of Aluminium Powder Coated Louver for fresh Air .Supply,Installation, testing & commissioning of Aluminium Powder Coated Louver for fresh Air 8 inch
Supply, Installation, Testing and Commissioning of insulated flexible duct complete with fittings and other accessories. Dia.150mm
Supply, Installation, Testing and Commissioning of opposed blade volume control Damper in GI construction.
Supply, Installation, Testing and Commissioning of sequencial controllers for DX units
SITC of Disc Valves made out of Sheet Steel powder coated with fully adjustable inner core for regulating volume for Exhaust.
Supply,Installation, testing & commissioning of supply air square diffuser with damper having a outer size of 600X600 and neck size of 350X350
Supply,Installation, testing & commissioning of Return air square diffuser without damper having a outer size of 600X600 and neck size of 450X450
Supply, Installation, Testing & Commissioning of Copper Refrigerant Piping for DX System. Thickness of copper piping as per manufacturers recommendations. copper piping rate should be including cable tray for laying the piping with GI Cover. The Refrigerant piping shall be completed with Nitrile rubber insulation thickness of 19mm. For DX Hiwall Unit-
Supply,Installation, testing & commissioning of GI Ducting Factory Fabricated with TDF Flanges as per SMACNA. The cost shall include Primary as well as secondary supports. Also all the ducting joints shall be completely sealed with Silicon Sealant, and a leak proof system shall be provided. All supports shall be in G.I. Price Should Be included with Zinc chromate coating and enamel paint for ducts.0 mm to 750 mm - 24 guage
Supply, Installation, testing & commissioning of Thermal Insulation as per below thickness for duct with XLPE / Nitrile Rubber Class 'O' for Fire with adhesive and all the joints sealed & finished with Alu Tape The thickness used shall be as under. The insulation shall have factory pasted wrinkled Aluminium Foil finish / UV Stabilised Finish. 13 mm thick
Supply,Installation, testing & commissioning of Acoustic insulation of duct with 10mm thick Armasound (Nitrile Rubber) Insulation Material stuck to the duct using Adhesive and then mechanically fixing to the duct using GI Nuts & Bolts and sealant to seal the leakages.
Supply,Installation, testing & commissioning of Acoustic insulation of duct with 32mm thick Armasound (Nitrile Rubber) Insulation Material stuck to the duct using Adhesive and then mechanically fixing to the duct using GI Nuts & Bolts and sealant to seal the leakages.
Supplying, erecting, testing and commissioning of 28 HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.
Supplying, erecting, testing and commissioning of 25 HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.
Supplying, erecting, testing and commissioning of 22 HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.
Supplying, erecting, testing and commissioning of 5 HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.
Supply, installation, testing and commissioning of VRF/VRV based CELLING SUSPENDED DUCT-ABLE CONCEALED type room/indoor unit (IDU) of nominal Given cooling capacity having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor celling mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for celling mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. 8 Tr unit
Supply, installation, testing and commissioning of VRF/VRV based CELLING SUSPENDED DUCT-ABLE CONCEALED type room/indoor unit (IDU) of nominal Given cooling capacity having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor celling mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for celling mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. 6 Tr unit
Supply, installation, testing and commissioning of VRF/VRV based CELLING SUSPENDED DUCT-ABLE CONCEALED type room/indoor unit (IDU) of nominal Given cooling capacity having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor celling mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for celling mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. 3 Tr unit
Supply, installation, testing and commissioning of VRF/VRV based 4-WAY CASSETTE type room/indoor unit (IDU) of nominal Given cooling capacity having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor celling mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for celling mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. 4 way cassette - 1.5 TR
Supply, installation, testing and commissioning of VRF/VRV based 4-WAY CASSETTE type room/indoor unit (IDU) of nominal Given cooling capacity having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor celling mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for celling mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. 4 way cassette - 2.0 TR
Supply, installation, testing and commissioning of VRF/VRV based 4-WAY CASSETTE type room/indoor unit (IDU) of nominal Given cooling capacity having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor celling mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for celling mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. 4 way cassette - 2.5 TR
Supply, installation, testing and commissioning of VRF/VRV based 4-WAY CASSETTE type room/indoor unit (IDU) of nominal Given cooling capacity having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor celling mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for celling mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete. 4 way cassette - 3 TR
Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system.
Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. 22. mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. 28.58 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. 34.9 mm dia (OD) (Soft drawn) with tube thickness 1.62 mm with 19 mm thick insulation
Supply and Installation of Table Top Type Framework for installing VRF Outdoor Units fabricated out of Heavy M. S.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
Download all tender documents and submit your bid