Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.3 LAccepted-AOC 1409 512 PREM NAGAR MADAN MAHAL JABALPUR M P | JABALPUR | MADHYA PRADESH | 482002 | L1 | Accepted-AOC Lowest amount quoted | |
| 2 | L2₹45.7 L+₹1.2 L (2.70%)Rejected-Finance H NO 2702 JHANDA CHCOWK PURANI BASTI RANJHI JABALPUR M P 482005 | JABALPUR | MADHYA PRADESH | 482005 | L2 | Rejected-Finance Second lowest amount quoted | |
| 3 | L3₹50.6 L+₹6.1 L (13.6%)Rejected-Finance MANEGAON DIWAN BADA KHAMARIA JABALPUR M P PIN 482005 | JABALPUR | MADHYA PRADESH | 482005 | L3 | Rejected-Finance Highest amount quoted | |
| 4 | Rejected-Technical 968 BAPOO NAGAR RANJHI JABALPUR MP PIN 482005 | JABALPUR | MADHYA PRADESH | 482005 | - | Rejected-Technical GST No 23ANAPS0272P2ZS of the bidder is found cancelled |
Tender Value
Refer Docs
EMD Value
₹90,800
Closing Date
6 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Justin O A, AE (Civ)
Garrison Engineer (East), Near COD Estate, Ranjhi, Jabalpur (MP)-482011
SPECIAL RPAIR TO BLDG NO E-20 (SM BARRACK DSC LINE) OF COD UNDER AGE B/R-II OF GE (EAST) JABALPUR
2023_MES_583483_2
8524/E8
Open Tender
Civil Works
Item Rate
240 days
Garrison Engineer (East) Jabalpur
D a(i)
7 documents required · 7 mandatory
₹500
Garrison Engineer (East) Jabalpur
₹90,800
Yes
1 Aug 2023
16 May 2023
8 Jun 2023
16 May 2023
6 Jun 2023
24 May 2023
16 May 2023 - 19 May 2023
Amount
Excavation in trenches for laying of cables, poles and stay in any type of soil n.exc 1.5 mtr wide and n.exc 1.50 mtr deep and getting out complete all as specified and directed.
Returning & filling in, including spreading and leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.
Removing excavated materials n.exc 50 mtr and depositing where complete all as specified and directed.
M&L PCC type C-1 (1:3:6) 20 mm graded crushed stone aggregate for parapet copping cill plinth course water through hold fastetc including all form mould etc complete all as specified and directed.
Supplying only Integral Waterproofing Compount (ISI Mark).
M&L brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and directed.
Brick work with sub class 'B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
Forming jambs, etc to openings, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work complete new work built in CM (1:4) or cement lime mortar (1:2:9) complete all as specified and directed.
Cutting openings, through brick walls built in CM or cement lime mortar for door, window and other openings or enlarging existing openings, converting window into door openings, etc or cutting out defective brick work for under pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard core tec to store and rubbish n.exc 50m complete all as specified and directed.
M&L for second class hard wood in scantlings clean swan timber framed work as rafter purlin in any position and any hight complete all as specified and directed.
S&F 2nd class hard wood plain, solid, straight and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints with and including back side painted with one coat black japan paint, complete all as specified and directed.
M&L 35mm thick 2nd class hardwood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed (2nd class hardwood) (Factory made ) complete all as specified and directed.
M&L plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated (2nd class HW rail and style) (thickness of shutters 35mm) (factory made ) complete all as specified and directed.
Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed.
Re-securing or easing and adjusting, without taking down shutters of any description exceeding 1 Sqm but n.exc 2 sqm each complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails M.S frame shall be covered with heat moulded both side Prelam PVC sheet PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both side Prelam PVC sheet for top rail, lock rail& bottom rail, panelling of both side Prelam PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.
S&F of factory made soild PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES Schedule Part-II (2010) complete all as specified and directed.
S&F aluminium anodised, barrel tower bolts of extruded section and fixed of size 200mm long complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F 100mm long Butt hinges MS cold rolled (medium wight) complete all as specified and directed.
S&F 100mm long Butt hinges extruded alumin alloy with galvanised mild steel hinge pin, anodised type B-21 complete all as specified and directed.
S&F in repairs 300 mm, ordinary rat tail rod pettern springs including roller and roller plate complete all as specified and directed.
S&F aluminium, anodised handle cast type of size150 mm complete all as specified and directed.
S&F Peg set of six Brass CP fixed to wall with PVC plugs and screw complete all as specified and directed.
S&F PVC Coated Curtain Rod 18-20 mm dia including curtain rings and brackets complete as in repair complete all as specified and directed.
S&F Tublar towel rail 20mm dia 'D' type 60 cm long between flange Brass CP complete all as specified and directed.
S&F Bracket for Dropy Rod of decorative type of colour of PVC complete all as specified and directed.
S&F MS flat iron as in Wind tie/hold fast etc including cutting drilling hole etc complete all as specified and directed.
M&L Mild steel framed work such as grills, gratings etc with ends of bars souldered or rivetted or forged into spikes, framed guard bars, frame works of water tanks and similar work conforming to Fe-250 Gde-165 complete all as specified and directed .
M&L MS Nut Bolt washer with Hexagonal head of dia more than 10mm and length complete all as specified and directed.
M&L Rolled section Fe-410-W (Gde-E- 250) quality-A as in Rafter purline strut truss etc using MS angle FI or hollow square section etc including cutting welding nut bolt etc complete all as specified and directed.
Supply and fix factory made pre-coated steel windows/ ventilators flash butt welded with side hung shutters including box type hinges with pre-coated handles, pre coated tower bolts, pre coated steel peg stay 250mm long with suitable lugs and with glazing bars dovetailed or welded with and including provision of guard bars with 4 mm thick plain sheet glass and wire mesh complete all as specified and directed. Notes :- For construction details, TD drawing No. CEJZ/TD/980 Sheet 1/2 & 2/2 shall be followed.
Supply and fix factory made pre coated steel windows/ ventilators flash butt welded with side hung shutters including box type hinges with pre coated handles, pre coated tower bolts, pre coated steel peg stay 250mm long with suitable lugs and without guard bars including 4 mm thick plain sheet glass and wire mesh complete all as specified and directed. Notes :- For construction details, TD drawing No. CEJZ/TD/980 Sheet 1/2 & 2/2 shall be followed.
S&F steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel complete all as specified and directed.
S&F Pre painted galvalume aluminum zinc coating GI bassed corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpas in Roof covering fixed with self tapping screw complete all as specified and directed.
S&F Pre painted galvalume aluminum zinc coating GI bassed Ridge/Gutter or ease board, factory made steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpas in Roof covering fixed with self Tapping screw complete all as specified and directed.
S&F suspended false ceiling using Chicago metallic E-Grid exposed suspended system, grid section size 600 x 600mm comprising of GI powder coated main runners of dim 39 x 24 x 360 x 0.88 mm thick (thickness comprising 0.40 mm + PPP GSO 30 MM and weight of runners 1.35 kg for 3600 mm length. Gross T of demesnes of 29 x 24 x 600 x 0.80 mm thick. The thickness of comprising GI 0.040 mm + PPPC GS (0.30 mm and weight of T 0.195 kg for 6000 mm length) and wall angle of dimension 22.2 x 22.20 x 3050 x 0.65 thick (the thickness comprising of GI 0.35mm + PPGC GS 0.30 and eight of angle 0.70 kg for 3050 mm length) with and including 6 mm thick HPSC (Tugs pressure steam cured) Preprimed, self embossed texture dingier bound water termited and sesistant for including and acoustic purpose the to be placed in the grid system duly suspended with 4mm dia GI war hangers fixed with steel dash trough fasteners from purline of the roof with butterflyclips (weight 0.007 kg per clip) hold down clip wt 0.0035 kg per clip) with provision of complete all as specified and directed. Note : PPPCGS Densts Prep anted Polysters Coated Galvanised steel.
M&L machine cut kota stone slab flooring 17-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. Note :- Stair portion thread being bull nose edge and one peace slab.
M&L machine cut kota stone slab as in vertical surfaces, skirting, dado 10-15 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.
White marble stone machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 100 mm thick PCC type D-2, 1:4:8 (40mm graded crushed stone aggregate) including demolition of old PCC and removing rubbish to a distance n.exc 100 mtr at low laying area complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in plinth protection/Path/paving surface even and smooth complete all as specified and directed.
S&F Machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thick M-40 grade with grey cement and pigment bedded and laid over and including 50mm thick sand cushion complete with and including joints filled with fine sand as specified and directed.
M&L for non skid ceramic colour tiles, 7 to 8 mm thick (square / rectangular ) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in colour cement to match complete all as specified and directed.
All as per item Srl No 48 here-in-before but of size 300 x 450 x 6 to7 mm thick in vertical surfaces of wall as in skirting or dado complete all as specified and directed.
M&L for 10mm thick cement plaster layer of mortar (1:4) for laying Wall Tiles complete all as specified and directed.
M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM (1:6), finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with water proofing compound as per manufacturer's instruction and finished the surfaces even and fair without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6).
M&L for screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finished complete all as specified and directed.
M&L for 15mm thick Screed bed or bedding layer of mortar (1:6) for laying floor finishes complete all as specified and directed.
Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying three coat of white wash complete all as specified and directed.
M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.
M&L for tucking on old/new plastered wall surface for apply a layer of plaster of paris 2 mm thick averaging on wall surface including cornices etc for proper levelling of plaster and applying two coat of OBD over a coat of primer complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of OBD over a coat of alkali resistant primer over a layer of 3mm thick birla white putty complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces over 10 cm width or girth including preparation of new wooden surfaces complete all as specified and directed.
M&L over 10 cm width or girth two coats of synthetic enamel paint over new prepared steel surface over one coat red oxide primer complete all as specified and directed.
M&L over 10 cm width or girth two coats of synthetic enamel paint over old steel surface complete all as specified and directed.
M&L for steel Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when ainted in a different tint with one coat of red oxide prmer and two coat of synthetic enamle paint complete all as specified and directed.
M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote oil complete all as specified and directed.
S&F 15mm bore steel water tubes (medium grade) galvanised with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.
S&F 20mm bore steel water tubes (medium grade) galvanised with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed.
Fixing only tubes any grade to wall floor or ceiling of 15mm dia of pipe complete all as specified and directed.
Fixing only tubes any grade to wall floor or ceiling of 20mm dia of pipe complete all as specified and directed.
Fixing only tubes any grade to wall floor or ceiling of 25mm dia of pipe complete all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 15mm bore of pipe complete all as specified and directed..
Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 20mm bore of pipe complete all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe complete all as specified and directed.
Dismantling of water tank of any description of up to 500 ltr capacity complete all as specified and directed.
S&F15mm, CP Bib tap fancy type chromium plated, cast copper alloy with capston heads, scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair complete all as specified and directed.
S&F15mm , Pillar tap, fancy type chromium plated, cast copper alloy, with capston heads, scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair complete all as specified and directed.
S&F15mm, CP angle cock/Stop cock fancy type chromium plated,cast copper alloy, with capston heads, scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair complete all as specified and directed.
S&F Gun metal Ball valve with lever type handle suitable for 20mm dia of pipe complete as in repair.
S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of loose 20 mm (minimum weight 210 grams) complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed.
S&F PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float end handle handle including bracket complete of capacity 10 litres complete all as specified and directed.
S&F in repair water closet including provision of cement concrete bedding viterous china squatting pan orrisa pattern of size 580 x 440 mm white with integral foot rest etc excluding flushing cistern as in repair complete all as specified and directed.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) fixed with cement complete all as specified and directed.
M&L for rotational moulded poly water storage tanks (cylindrical vertical with screwed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 ltr including PVC Float valve of 20mm dia and with lid screwed down type complete all as specified and directed.
S&F Vitreous china WHB size 630 x 450mm oval type as in repair in cluding CI bracket PVC 32mm dia waste coupling waste pipe complete all as specified and directed.
S&F as in repair Vitreous china urinal Half stall type white excluding flushing cictern complete all as specified and directed.
S&F in repair urinal spreader in urinal complete all as specified and directed.
S&F Soap dish of PVC fixed with PVC rawal plugs and screw complete all as specified and directed.
S&F PVC (SWR) Pipe of 110mm dia any length and joint as specified complete all as specified and directed.
S&F PVC (SWR) Pipe of 75mm dia any length and joint as specified complete all as specified and directed.
S&F 110mm dia PVC(SWR) pipes bends any radious with acces door complete all as specified and directed.
S&F 75 mm dia PVC(SWR) pipes bends any radious with acces door complete all as specified and directed.
S&F 75 mm dia PVC(SWR) pipes Tee any radious with acces door complete all as specified and directed.
S&F 110mm dia PVC(SWR) pipes junction, single (single T/Y) equal or unequal any radious with acces door complete.
S&F 110mm dia PVC(SWR) vent cowl complete all as specified and directed.
M&L 75 mm dia of out let PVC (SWR) floor trap plain with grating including jointing with solvent cement with greating as in repair complete all as specified and directed.
M&L PVC (SWR) gully trap 125 /100 plain with grating including jointing with solvent cement with greating as in repair complete all as specified and directed.
M&L for Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches or wall complete all as specified and directed.
Dismentling timber scantling as framed work 40 Sqcm and over in section in any position complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards/slabs/blankets any thickness including cover fittlets complete all as specified and directed.
Demolition of brickwork or stone/boulders masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but n.exc ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
M&L for joints 12mm wide to be full depth of PCC shall be provided at every three meter and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight complete all as specified and directed.
Demolition of concrete ground floors and pavings n.exc 15cm thickness (below or above ground level) unreinforced complete all as specified and directed.
Dismentling timber as framed work scantling in fillets, rails, posts, rafter, purlins etc under 40 Sqccm in section in any position complete all as specified and directed.
Dismantling of AC corrugated/semi corrugated sheets as in roof covering complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light, fan, power point or bell point etc) complete including fixture and fitting such as switches, ceiling rose holders and regulators light fittings etc, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.
Taking down old/unservicable light fitting any type, tube light fitting and fixtures, etc and making good to the dirsturbed surfaces of walls/floor etc to match with existing surfaces including white washing/colour to match with existing wall/floor/ceiling finishes etc complete all as specified and directed.
Taking down old/unservicable distribution boards by disconnection of electric connection carefully SPN DBs/TPN DBs/main Switch including old unserviceable MCCBs/MCBs, Isolators, etc and making good to disturbed surface etc complete all as specified and directed.
Taking down carefully copper/aluminium Sub Main wiring/service connection of any size from surface/connected/existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors, roofs etc complete all as specified and directed.
M&L for concealed point wiring complete with 1.5 Sqmm FRLS PVC insulated and unsheathed two single core multistranded copper conductor cable for working voltage 1100 volts, grade drawn into and including 20 mm dia PVC conduit of medium grade for one light point controlled by one switch including 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor and connecting to earth dolly and to be terminated in and inclusive of MS sunken box 1.2mm thick (flush metal box) for mounting of fittings like switch, complete with 3mm thick laminated switch board cover complete all as specified and directed.
All as per item No 112 here-in-before but for One ceiling fan point controlled by one switch complete all as specified and directed.
All as per item No 112 here-in-before but for One exhust fan point controlled by one switch complete all as specified and directed.
All as per item No 112 here-in-before but for One 3 Pin, 5/6 amps socket outlet point, on the same board with with 1.5 Sqmm cable size etc complete all as specified and directed. .
All as per item No 112 here-in-before but for One 3 Pin, 5/6 amps socket outlet point, independent board with 1.5 Sqmm cable size etc complete all as specified and directed. .
All as per item No 112 here-in-before but 2.5 Sqmm copper conductor for 5 Pin 15 Amp switch socket combintion on independent board and 2.5 Sqmm stranded copper conductor as an earth continuous wire complete all as specified and directed.
All as per item No 112 here-in-before but 4.00 Sqmm copper conductor for 5 Pin 15 Amp switch socket combintion on independent board and 4.00 Sqmm stranded copper conductor as an earth continuous wire complete all as specified and directed.
S&F switch piano flush type 5/6 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified and directed.
S&F 5 pin socket outlet, 5/6 Amps / 3 pin 5/6 Amps, flush type, ISI marked, complete all as specified and directed.
S&F switch socket combination 2 in 1, 5 A flush type, complete all as specified and directed.
S&F switch socket combination 5 in 1, 5A/16A flush type complete all as specified and directed.
S&F ceiling rose surface type PVC/Polycarbonate isolated body, 65 x 20mm, 3 terminals complete all as specified and directed.
S&F for step type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.
S&F Lamp holder, including 10 W LED bulb, PVC/polycarbonate type with back plate suitable for battan fittings complete all as specified and directed.
S&F new 1 x 20W, 4 feet, LED light fittings wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electric driver including 1 x 20 Watt LED Tube light etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size compete all as specified and directed.
S&F new 1 x 10 W, 2 feet, LED light fittings wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electric driver including 1 x 10W LED Tube light etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size compete all as specified and directed.
S&F for LED luminaire 600 mm x 600 mm square LED panel 35/36 watts, 220V recessed type with high efficieny PMMA diffuser soft glare free light complete with drovers, holders, LED lamp suitable for roof ceilling, including connecting up with driver three core flexible copperr conductor cases of suitable size complete all as specefied and directed.
Supply and fixing LED security light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multipe optics complete with IP 65/66 protection including bracket made of 40 mm dia GI tubing medium grade of suitable size including fixing clamps and light fitting etc complete all as specified and directed.
M&L sub main wiring (concealed type) in and including PVC Rigid Conduit of suitable size with two single core FRLS PVC insulated unsheathed cable, 1100 volts, grade having stranded copper conductor of 6.00 sqmm nominal cross sectional area each drawn into and all accessories including one single core 6.00 sqmm copper conductor for earth continuity conductor connected to earth dolly complete all as specified and directed. Note :- Two run single core cable(1 x 6 Sqmm single core cable of Red/Yellow/Blue colour for Phase + 1 x 6 Sqmm single core cable Black colour for Nutral), 1 x 6 Sqmm single core cable Green colour for earth conductor and one run of PVC conduit shall be measured as a unit length.
S&F for sheet metal enclosure MCB DB TPN 4 Way vertical type with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.
S&F for sheet metal enclosure MCB DB SPN 8 Way vertical type with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.
S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one double pole MCB 20A, 10 KA 240 volt complete all as specified and directed.
S&F MCB triple Pole and neutral rated capacity 63 Amps, 415 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.
S&F MCB single Pole and neutral rated capacity 32 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.
S&F MCB single Pole rated capacity 5 to 32 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.
M&L for taking down ceiling fan and exhaust fan cable end, dismantling blades and removing fan and blades to MES store complete all as specified and directed.
S&F ceiling fan, 230 volts, 1200 mm sweep with service value of the fan shall be greated than 6.1 as per BIS with necessary aceessories and electrical connections for ceiling rose to fan terminal complete all as specified and directed.
S&F exhaust fan, steel body AC single Phase, 230 V of size 300 mm sweep with blades, and frame and louvers complete with louver with bolts nuts and washers suitable size embedded in the wall including provision of PVC flexible coppler cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connecttion and making suitable size of hole to existing brick wall for fan base and old exhaust fan deposited to AGE E/M Store complete all as specified and directed.
Unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note :- Mesurement shall be done after puning down of sand.
M&L for Fly Ash bricks Sub-class 'B' locally available laid flat in trenches over sand cushioning for cable protection complete all as speciffied and directed.
M&L for PCC 1:3:6 type B-2 using 20mm graded crushed stone aggregate as in coping of pole etc including form work and finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.
S&F 40 mm dia GI Pipe light grade for cable protection passing under road/floor or for fixing to poles complete all as specified and directed.
Supply, Laying and testing and commissioning LT underground cable 1100 volts grade, 50 Sqmm 3.5 Core LT XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trences/ducts, on poles etc of size complete all as specified and directed.
M&L earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earh pit not less than 2.25m deep below normal ground level) with top edge of earth plate not less than 1.5 m below normal ground level connected to galvanised earth wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron, all as shown in electrical plate No 5, connected to earthing test point including excavation/earth work in any type of soil, PCC 1:3:6 type C-2 in pit and CI pit pit cover including funnel covered with wire mess and handle duly reinforced with 6 mm round bars both ways @ 125 mm c/c, GI protection pipe 15mm bore light grade and watering pipe 20mm bore medium grade complete all as specified and directed.
Schedule of credit amount of Rs. 1,19,850.50 to be deducted during AOC
R R VISHWAKARMA CONSTRUCTION CO
M/S BHATIA CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .