Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.9 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹13.6 L+₹2.5 L (22.6%)Rejected-Finance SAI VILLA C 65 EKTA NAGAR BAREILLY UTTAR PRADESH 243 122 | BAREILLY | UTTAR PRADESH | 243122 | L2 | Rejected-Finance Not Lowest | |
| 3 | Rejected-Technical | - | Rejected-Technical Due to not enisted in appropriate catagery |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
13 May 2025, 6:00 pmClosed
Garrison Engineer
Military Engineer Services, Garrison Engineer, Kamptee 441001
REPAIR TO SEWAGE LINE, SEPTIC TANKS AREA DRAINAGE AND OTHE RELATED WORKS AT OTM AREA UNDER AGE B/R-I AT GE KAMPTEE
2025_MES_704409_1
8760/E8
Open Tender
Civil Works
Item Rate
270 days
Kamptee
All as per NIT
8 documents required · 8 mandatory
₹500
Yes
GE Kamptee
₹40,000
Yes
16 Jun 2025
15 Apr 2025
15 May 2025
15 Apr 2025
13 May 2025
29 Apr 2025
Amount
Demolition and breaking up drain pipes (salt glazed ware, AC or RCC Pipes) of any description and size set in cement mortar complete all as specified and directed.
M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregated) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing for any dia of pipes complete all as specified and directed.
M&L for SGSW (Grade 'A') drain pipes confirming to IS size 150mm laid in trenches and jointed in CM 1:2 complete all as specified and directed.
M&L for dewatering of soak well or sewage pit of any dia and depth manually or by using pump and removal of sludge if any to a distance exc 1.5Km but n. exc 5Km out of MoD land complete all as specified and directed
M&L for removing of small vegetation /bushes /roots /plants/grass etc from any position of buildings and removel of rubbish to a distance exc 50m and including making good disturbed surface by repair work including matching with the existing surface complete all as specified and directed
M&L for Opening of manhole covers, taking out sludge from septic tanks, inspection chambers, manholes by removing sludge in solid, semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc 1.5Km but n.exc 5Km out of MoD land complete all as specified and directed (Note : Measurements will be taken only after dewatering of the septic tank and no extra payment will be made for dewatering the same)
M&L for cleaning of SGSW/RCC Pipe 200 mm internal dia of any depth by rodding or by using pressure pump completely including manholes and removal of sludge to a distance exc 1.5Km and n.exc 5Km out of MoD land complete all as specified and directed
M&L for cleaning of SGSW/RCC Pipe 150mm internal dia of any depth by rodding or by using pressure pump completely including manholes and removal of sludge to a distance exc 1.5Km and n.exc 5Km out of MoD land complete all as specified and directed
M&L for cleaning of blocked drain any depth by removing sludge and flush with water and removal of sludge to a distance exc 1.5Km and n. exc 5Km out of MoD land complete all as specified and directed
M&L for cleaning of blocked WC and SWG Pipe line upto 1st manhole any depth by rodding or by using pressure pump completely including 1st manhole and removal of sludge to a distance exc 1.5Km and n. exc 5Km out of MoD land complete all as specified and directed
Dismantling floor hearth or wall tiling including cement mortar bedding and disposal of rubbish outside of MD land complete all as directed.
M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.
M&L coloured/printed glazed ceramic tiles 300x450x6 to 7mm thick, in floors/walls skirting/dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.
All as item No above but as in skirting/dado etc with 10mm backing in cement mortar 1:4 complete.
Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m etc complete all as specified and directed.
Taking down cement plaster, any description on brick or stone walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.
M & L for brick work with fly ash brick, straight or curved on plan to any radius built in half brick thick wall built in cm 1:4 (Using old size brick) complete all as specified and directed.
M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping including weathering throating and necessary formwork complete all as specified.
M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement complete all as specified.
M & L for rendering 15mm thick on fair faces of brickwork or on concrete surfaces in cement mortar (1:6) and finishing surfaces even & smooth without using extra cement complete all as specified and directed by Engineer in charge
Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish off the premises complete all as specified and directed.
M&L for precast RCC 1:2:4 type B1 using 20mm stone aggregate as in landings, cover slabs, for manholes etc and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.
S&F for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.
Formwork to sides of concrete foundations, footings, bases of columns, plinth beams, fair finished surface all as specified and directed.
M&L for two coat of white wash on newly plastered surfaces on wall complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out Soft/loose soil.
All as per item No above but depth exceeding 1.5m and not exc 3.0 m depth complete all as specified and directed.
Excavation over areas not exc 1.50m deep and getting out in soft/loose soil complete all as specified and directed.
All as per item No 47 above but exc. 1.5m depth and not exc 3m depth complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.
Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping benching, bed plates and the similar including, weathering, slightly rounded or chamfered edges and throating complete all as specified and directed.
M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.
Taking down of PVC, pipes of any size or pattern including all fittings etc complete all as specified and directed.
S&F in repair PVC (SWR) pipes 150mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F in repair PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.
S&F in repair PVC (SWR) pipes 75mm dia complete all as specified and directed.
S&F in repair PVC (SWR) bends with access door any radius, 110mm dia complete all as specified and directed.
S&F in repair PVC (SWR) bends with access door any radius, 75mm dia complete all as specified and directed.
S&F in repair PVC (SWR) branch piece, double (double Y) equal or unequal with access door, 110mm dia complete all as specified and directed.
S&F stack clamp made out of 50x5 mm flat iron for 75mm dia of pipe complete all as specified and directed.
S&F stack clamp made out of 50x5 mm flat iron for 100mm dia of pipe complete all as specified and directed.
S&F in repairs PVC (SWR) nahani trap 75mm dia with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white ISI marked with cast iron 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified.
S &F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe)
S&f in repair Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe)
S&F in repairs Urinal spreader of brass chromium plated for fixing with 15mm dia pipe complete all as specified and directed
S&F in repairs Waste fittings, 32/40 mm brass, chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repairs 32mm bore of pipe low density polyethylene pipe (LDPE) including necessary elbow, tee, socket, etc of pressure rating 6kg/cm fixed complete all as specified and directed.
S&F in repairs flush pipe of polythene of low or high density 32 mm PVC for low level flushing cistern complete all as specified and directed.
S & F in repair white Vitreous china wash down water closet pan (pedestal pattern) including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed .
S&F in repair PVC valve less symphonic action type flushing cistern 10ltr capacity low level, white/coloured with inlet ball valve float and handle including bracket(incl. Taking down old cistern ) and fixing of PVC flush pipe 32 mm dia and PVC connection pipes complete all as specified and directed.
Supply & fixed in repairs Wash Hand basin ( flat back or angle back )of size 550 X 400 MM white including , waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.
NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 21,940.00]
NORTH INDIA PEST CONTROL (BID ID -3292307)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .