PROVIDING DECORATIVE STREET LIGHTS AT DAMAN DISTRICT.

Amount

Elect. work

Mains with ISI marked, 1.5 KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lungs, nuts and bolts if required.One wire 10.00 sq. mm

Supplying and erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper wires of following size. to be erected as directed. 2.50 Sq.mm 3 core round PVC sheathed.

Supplying & erecting following spare parts for panel mounting Switch Disconnector Fuse Units. Neutral Link for. (i) 32 / 63 / 125 Amps.

Approved make Three pole moulded case circuit breaker having breaking capacity ICU of 25 K.A. at 415V, having normal current rating up to 25A. to100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing.

Miniature circuit breaker single pole 6A to 32A. Suitable to operate on 240V. A.C. system and having breaking capacity 10 KA to be erected in existing box. Confirming to IS 8828 / 1996 with ISI Mark.

Providing and erecting required size HOT deep Galvanised strip for earthing of H.T. OCB / ACB / Transformer LT panel board, Motors etc. using Proper clamp.

Supplying & erecting earth pit of minimum bore dia. 150mm size, approved make Safe Earthing Electrode consisting Pipe-in-pipe Technology as per IS 3043-1987 made of corrosion free G.I. Pipe having Outer pipe dia of 50mm having 80-200 Micron galvanizing, Inner pipe dia of 25mm having 200-250 Micron galvanizing, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications.

Cast iron earth plate size 30 x 30 x 0.35 cms. hurried in specially prepared 2.5 Mtr. deep earth pit complete with necessary G.I. strip in G.I. pipe 2 Mtr. long with coupling and G.I. plug for earthing of switch gear, conduit run or power plug etc.

Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 4 core 16 Sq. mm

4 core 25 Sq. mm.

Marking trench in soft soil of suitable width of 90 cms. Deep for laying cable or locating the fault all over the run and back filling the same and making the surface as normal ground.

Marking trench in Hard murrum / Tar Road of suitable width of 90 cms. or required depth for laying and size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground.

Add if additional machineries like hammer driller or JCB use (Add)

Providing & laying R.C.C. hume pipe for cable to be laid 90cms. Below ground across the road crossing or on floor with necessary material in an approved manner and making the ground as per original. 100 mm dia.

Supplying following size of Light duty “A” Class G.I. Pipe & erecting as directed by Engineer – in – charge 50 mm. dia.

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene (conforming to IS 14930 II) with necessary connecting accessories of same material at required depth for laying of cable. Below ground / road surface for enclosing cable and backfilling the same to make ground as per original 50 mm. dia.

Providing and fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. 2 to 4 core 25 Sq. mm.

Solderless crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 16 Sq. mm.

Terminal board of size 5.0 x 127 x 152.4mm. bakelite sheet with 15Amp. kitkat pattern porcelain fuse unit with suitable brass studs with nuts, washers and clamps of size 25mm x 3mm suitable for. Pole painted with one coat of red lead paint.

Foundation for burial type pole Providing M-20/1:2:4 cement concrete foundation & 70% PCC from bottom including excavation for the pole of size 45 x 45 x 100 cms. Deep in below ground level with plinth of 45cms x 45cms (or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner. (for 4 & 6 mtr pole).

Providing M-20/1:2:4 cement concrete foundation & 70% PCC from bottom including excavation for the pole with 60 x 60 x 120 cms. Deep in below ground level plinth of 45cms x 45cms (or 45 cms dia x 45 cms) high upper ground level with necessary curing and finishing in approved manner. (for 7.5 & 8/8.5 mtr pole).

Supplying and erecting MINI SECTION PILLAR 75 x 60 x 45 cms. fabricated from 16 Gauge. T

Supplying and erecting bakelite sheet 12mm thick HYLAM make on existing angle iron frame.

Fabricating the box type item made from M.S. Sheet with A.I. supports wings doors, handles other hardware materials as per required design finishing with three tank powder coating processed painted erected as directed including minor civil work.

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery backup 1 channel day clock with 14 memory programme , suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup time 1 minimum & LCD display also comprised permanent ON/OFF switching Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required with necessary connection erected as directed.

Supplying & erecting power contactor for time switch complete erected as per direction Cat. III. 4 Pole 440V 40 Amp.

Providing I.S mark H.Y.S.D reinforcement for R.C.C work including, bending and placing in position complete upto foor two level.

Supply, erecting, testing & commissioning of Decorative Luminaires for Urban lighting, body made of painted spun aluminum, the protector is made of polycarbonate grade UV-resistant (IK 08)with third party NABL report, permanently sealed optical compartment with IP66 protection supported by third party NABL report. Luminaire offers tool free access to gear compartment with IP44 protection. Luminaire can be installed as a suspended luminaire. The luminaire is equipped with the LensoFlex2® technology photometric system, PMMA lenses with wide photometry for increased pole spacing. Fixture is having a surge protection of 10KV. Electronic driver is having power factor>0.90*, THD<20*% and input voltage range from 120-227V AC at 50Hz. Luminaire efficacy is 117 lm/ watt system lumen greater than 4700 lumen with third party NABL report in CCT range of 4000k as per ANSI. System life of 50000 burning hours with 70% of initial lumens maintained. Luminaire is suitable for operating temperature (Ta) from -20 to 50c tested in third party NABL Lab. Driver can withstand 320V AC for 48 hours and 360 V AC for 2 hours. Make: Keselec, Model: PORTO 40W LED, as per design & drawing and as directed by the Engineer-in-charge. (Eq. makes: Philips, Bajaj, Crompton, Havells, Wipro,Philips, Neri,Orient.)

Supply, erection, testing & commissioning of Decorative Luminaires Watt: 75 W Make: Keselec, Model: PORTO NU 75W LED/ Bajaj/ Philips/ Wipro/ Havells, complying above specification as per drawing and as directed by Engineer-in-charge. Supply, erecting, testing & commissioning of Decorative Luminaires for Urban lighting, body made of painted spun aluminium, The protector is made of polycarbonate grade UV-resistant (IK 08), Permanently sealed optical compartment with IP66 protection. Luminaire offers tool free access to gear compartment with IP44 protection. Luminaire can be installed as a suspended luminaire. The luminaire is equipped with the LensoFlex2® technology photometric system, PMMA lenses with wide photometry for increased pole spacing.

Luminaire is suitable for operating temperature (Ta) from -20 to 50c. Driver can withstand 320V AC for 48 hours and 360 V AC for 2 hours. MakePhilips/ Neri/Orient , Model: PORTO 75W LED, Bajaj Borage 75W led or Surya SLE PT 75W VEGA company makes as per design & drawing and as directed by the Engineer-in-charge. Supply, erection, testing & commissioning of Decorative with BIS certified luminaire and with BIS certification (as per drawing ) for urban lightening, body made of painted spun aluminium, the deep bowl protector is made of polycarbonate grade UV resistant IK 09 ( confirm by IS10322 report from third party NABL approved lab) Permanently sealed optical compartment with IP66 protection. ( confirmed by IS102322 report form third party NABL approved lab) Luminaire offers tool free access to gear compartment with IP65 protection (confirmed by IS 10322 report from third party NABL approved lab). Minimum Luminaire dimension of 540* 550 mm luminaire can be installed as a suspended luminaire. The Luminaire is equipped with PMMA lenses with wide photometry for increased pole spacing. The luminaire is provided with disconnect or to avoid electrical shocks.

Lux, with Avg. uniformity- 65%, in/Max- 45%, MF-0.85 for 8 mt mounting height and 18 mt spacing ( central or side ). With maximum 1 mt arm bracket and with 0 degree inclination presented with road lightening design report and IES file of the luminaire system life of 50000 burning hours with 70% of initial lumens maintained.Luminaire is suitable for operating temperature (Ta) from -20 to 50c. Driver can withstand 320 Supply, erection, testing & commissioning of 320 V AC for 2hours. Watt: 90 W Make: Keselec make, Model: PORTO NI 90 W LED/ Bajaj/ Philips/ Havells/ Wipro/Neri/Orient complying tender specification and as directed by the Engineer-in-charge. Supply erceting tesing and ccommsiioning of Decorative luminaous (as per drawing) for urban lighting body made of painted spun aliminiyum.

Luminaire is suitable for operating temperature (Ta) from -20 to 50c. Driver can withstand 320V AC for 48 hours and 360V AC for 2 hours. Watt:110W Make: Keselec, Model: PORTO NU 110 W LED/ Bajaj/ Philips/Neri/Orient complying above specification as per drawing and as directed by Engineer-in-charge. Supply, erecting, testing & commissioning of Decorative Luminaire for Urban lighting, body made of painted spun aluminium, The deep bowl protector is made of polycarbonate grade UV resistant IK 09 (Confirm by IS10322 report from Third party NABL approved lab) Permanently sealed optical compartment with IP66 protection. (Confirmed by IS10322 report from Third party NABL approved lab) Luminaire offers tool free access to control gear compartment with IP65 protection (Confirmed by IS10322 report from Third party NABL approved lab). Minimum Luminaire dimensions of 545 * 550 mm. Luminaire can be installed as a suspended luminaire. The luminaire is equipped with PMMA lenses with wide photometry for increased pole spacing. The luminaire is provided with disconnect or to avoid electrical shocks. Easy access to control gear compartment by opening special latch kind of arrangement.

Decorative single Arm Cascade bracket with 940 mm height mounted on Pole. Decorative single arm bracket of 1 mt single side (as per attached drawing ) as per EN 40 standard, hot dip galvanized as per EN-40 standard, hot dip galvanized as per ASTM A123, with minimum average GI Coating of 65 micron. PU painted with DFT of 70 micron using with high quality paint and primer. Bracket weight should not be lesser than 14 kg and bracket is painted with high quality Marine grade paint, painted in closed paint booth chamber in closed and control environment. Model: Chatsworth Pole with Cascade bracket. Make: Keselec/ Bajaj/ Philips/ Neri/Orientcomplying technical specification.

Decorative Double Arm Cascade bracket with 940 mm height mounted on Pole. Decorative Double arm bracket of 1 mt each side (as per attached drawing) as per EN-40 standard, hot dip galvanized as per ASTM A123, with minimum average GI coating of 65 micron, PU painted with DFT of 70 micron using with high quality paint and primer. Bracket weight should not be lesser than 20 kg and bracket is painted with high quality Marine grade paint, painted in closed paint booth chamber in closed and control environment. Model: Chatsworth pole with cascade Bracket. Make: Keselec/ Bajaj/ Philips/ Neri/Orient complying technical specification

Supply of 8 mtr height decorative Chatsworth pole having cast iron decorative octagonal base and pipe dia of 165 mm OD & 1 mtr long with decorative cast iron reducer jointing with 89 mm OD straight pipe with ornamental cast iron ring. Pol shall be mounted on square base plate 280*280*14 mm thickness suitable for mounting on 4 nos. foundation bolts. The pole shaft should be fabricated out of steel tube of grade YSt 240 and batch test reports for chemical and mechanical properties of material should be submitted along with the bid. Structurally designed base plate of steel A36/ A572-50 or equivalent should be welded with the pole shaft. The welding shall be of high quality, carried out by qualified welders using approved welding procedures and tested for its quality through NDT method, such as DP test. Supply, erecting, testing & commissioning of Decorative Luminaires for Urban lighting, body made of painted spun aluminium, The protector is made of polycarbonate grade UV-resistant (IK 08), Permanently sealed optical compartment with IP66 protection. Luminaire offers tool free access to gear compartment with IP44 protection. Luminaire can be installed as a suspended luminaire. The luminaire is equipped with the LensoFlex2® technology photometric system, PMMA lenses with wide photometry for increased pole spacing. The pole shall be provided with an opening at the bottom with removable cover for providing connectors, MCB, etc. (to be supplied by others) Appropriate reinforcement shall be provided to compensate for the loss of section at this point to ensure overall structural stability of the pole under specified operating conditions.The pole shaft structure shall be hot dip galvanized through single dip process as per ASTM A123 and minimum average coating shall not be less than 65 microns. No mechanical operation, such as welding, drilling, etc. should be carried out on the pole structure post hot dip galvanizing. Poles using pre galvanized steel tubes or hot dip galvanized through double dip process are not acceptable.Complete pole shall be treated with high quality primer and thereafter coated with Polyurethane paint to minimum average DFT of 70 Microns.

Supply, erection, testing & commissioning of 8 Mtr height Single arm type decorative Chatsworth pole having cast iron decorative octagonal base and pipe dia of 165 mm dia & 1 mtr long with decorative cast iron reducer jointing with 89 mm OD Straight pipe with ornamental cast iron ring. Pole shall be mounted on Square base plate 280*280*14 mm thickness suitable for mounting on 4 nos foundation bolts. The pole shaft should be fabricated out of steel tube of grade YSt 240 and batch test reports for chemical and mechanical properties of material should be submitted along with the materials. Structurally designed base plate of steel A36/ A572-50 or equivalent should be welded with the pole shaft. The welding shall be of high quality, carried out by qualified welders using approved welding procedures and tested for its quality through NDT method, such as DP Test.

(Rates assumed under Buy Back Scheme of old poles. Rates is after deducting the price of old poles.) Supply of 8 mtr height decorative Chatsworth pole having cast iron decorative octagonal base and pipe dia of 165 mm OD & 1 mtr long with decorative cast iron reducer jointing with 89 mm OD straight pipe with ornamental cast iron ring. Pol shall be mounted on square base plate 280*280*14 mm thickness suitable for mounting on 4 nos. foundation bolts. The pole shaft should be fabricated out of steel tube of grade YSt 240 and batch test reports for chemical and mechanical properties of material should be submitted along with the bid. Structurally designed base plate of steel A36/ A572-50 or equivalent should be welded with the pole shaft. The welding shall be of high quality, carried out by qualified welders using approved welding procedures and tested for its quality through NDT method, such as DP test.

Supply & fixing of EN-grade foundation bolt M20 x 600mm long. (4 Nos.)

Services connection charges ( 3-Phase).

Removal of street light pole 9 mtr. long with fixtures & stacking at the lead of upto 10 Km.

Horizontal boring below the road more than 0.9 mts. Depth with 4'' size HDPE pipe for cable crossing complete

R AND B INFRA PROJECT PVT LTD