Repair maint incl periodical services to Offrs accn

SCHEDULE ‘A’ Part - I (Repair Work )

Painting with synthetic enamel paint One or more coats on old work of approved brand and manufacture of required colour to give an even shade.

Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make (Make - Hinware/Jaquar/Paryware)

Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality (Make - Hinware/Jaquar/Paryware)

Providing and fixing 15mm nominal bore C.P. brass 2 Ways angle valve of approved quality (Make - Hinware/Jaquar/Paryware)

Providing and fixing 15mm nominal bore C.P. bib cock of approved quality (Make - Hinware/Jaquar/Paryware)

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge

Providing and fixing 15mm nominal bore C.P. Sink cock long neck of approved quality (Make - Hinware/Jaquar/Paryware)

Providing and fixing wash Basin mixer of approved quality (Make - Hinware/Jaquar/ Paryware)

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing CP Brass toilet paper holder

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 15mm nominal bore hand faucet with holding clamp of approved quality (Make - Hinware/Jaquar/Paryware)

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge.

Providing and fixing to existing door frames 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm x 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm x 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places

Providing and laying vitrified floor tiles in 600x600 mm (thickness to be specified by the manufacturer) of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Labour only for distempering on walls and ceiling in two or more coats paint including preparation of surface even and smooth.

Repairs to plaster of thickness 12 mm to 20 mm in patches with cement mortar 1:4 (1cement: 4 coarse sand) of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge

M/S. M G M ENTERPRISES (BID ID -3246534)

Aien Meren Enterprises (BID ID -3246603)