Development of Open Playgrounds by Supplying and Installing Play Equipments in Big Parks Area above 1 Acre of Division III MCF

4-Seater See-Saw i. FRP coated Frame and Structure (Main Frame Material): • Heavy-duty MS pipe (mild steel), ISI grade, FRP coated • Pipe thickness: 3.0 mm • Fulcrum/Base Support: • MS square/round pipe, min. 80 mm OD × 3.0 mm thickness • Pivot support with ball bearing or heavy-duty bush for smooth movement. ii. Dimensions • Overall Length: 3.0 mtr • Height at Seat Level (rest position): 600 – 750 mm • Height at Maximum Tilt: ~1.2 m • Beam Size: 80 mm OD round/rectangular pipe, thickness 3.0 mm. iii. Seats • Material: FRP (Fiber Reinforced Plastic) • Size per seat: 300 mm × 250 mm • Quantity: 4 (two on each side, facing each other) • Backrest (optional): For toddlers, height ~200 mm iv. Handles and Footrest • Handlebar: MS pipe Ø 25–32 mm, height 350–400 mm above seat • Footrest: MS rod/pipe with anti-slip rubber grip v. Load Capacity • Per Seat Capacity: 40–60 kg • Total Safe Load: ~200–240 kg vi. Safety Features • Stoppers at both ends with rubber pads to avoid sudden impact • Rounded edges and smooth powder coating (non-toxic) • Bearing/bushing enclosed for safety vii. Age Group Suitability • 4–12 years recommended • Supervised use for younger children viii. Installation: - Base plates with grouting bolts in RCC foundation (min. 300 × 300 × 450 mm deep footing). Ensure minimum 2 m safe clearance zone around the see-saw

Arch swing: - i. FRP Coated Frame and Structure • Type: Arch frame, single bay (2-seater) • Material: ISI grade MS (mild steel) pipes. • Pipe OD (arch legs): 80 mm (min.) × 3.0 mm thickness • Top cross beam: 80 mm OD MS pipe × 3.0 mm thickness • Arch shape: Radius : 1 mtr (depending on bay width) ii. Dimensions • Height (ground to top beam): 2.6 – 3.0 m (recommended 2.8 m) • Seat clearance from ground (at rest): 350–500 mm • Distance between two swing seats (side-to-side): Minimum 600–750 mm iii. Swing Seats • Material: FRP • Type: Flat seat (for 5–12 yrs) • Size: 400–450 mm × 200–250 mm • Load capacity per seat: 80–120 kg iv. Chains / Ropes • Type: Galvanized / stainless-steel chain with plastic/rubber coating (pinch-free) as desired by Engineer in-charge • Chain thickness: 6–8 mm • Length: 1.6 - 1.8 m (adjustable for seat clearance) • Connection: Heavy-duty D-shackles or clevis connectors with anti-theft nut/bolt. v. Safety Zone and Surfacing • Impact area: At least 2.0 m front and back, 1.75 m side clearance per swing. • Fall height: 1.5 – 1.8 m vi. Load Capacity and Stability • Single bay (2 seats): Total ~200 kg • Multi-bay: Each bay must be independently anchored • Foundation: RCC footing per arch leg, size 300 × 300 × 600 mm depth with anchor bolts vii. Age Group Suitability • Toddlers (2–5 yrs): Bucket seat with harness. • Kids (5–12 yrs): Flat belt/FRP seat

Single Slide: - Single-lane i. FRP Coated Structure and Material • Main frame fabricated from MS (Mild Steel) tubular pipes of minimum 50 mm diameter and 3 mm thickness, conforming to ISI standards. • Supporting legs to be embedded in M-15 grade cement concrete block (1:2:4 mix) of size not less than 450 mm × 450 mm × 600 mm (depth). • Platform frame made of MS angle iron-FRP Coated (40 × 5 mm) 42 MM OD PIPE with chequered sheet/8 mm FRP sheet / for anti-skid surface. ii. Slides • Single slide made of FRP (Fiber Reinforced Plastic) • Length of slide: 2.5 m to 3.0 m (approx.) from top to bottom. • Height of starting platform: 1.80 MTR (approx.) above ground level. iii. Safety Features • Handrails made of MS pipes- FRP coated (25 mm Dia, 2.5 mm thick) provided on both sides of stairs and top platform. • Safety guard/barriers of minimum 600 mm height at the platform to prevent accidental fall. • All sharp edges, welding joints and corners to be properly ground and rounded. iv. Ladder/Stairs • Ladder made of MS pipe-FRP Coated (32 mm dia, 3 mm thick) with non-slip rungs of MS flats (25 mm × 5 mm). • Angle of inclination of ladder approx. 60° for safe climbing. v. Finishing • All MS parts to be treated with anti-rust epoxy primer and FRP coating. • FRP surface to be glossy, UV-resistant and smooth finished. vi. Load Bearing Capacity • Slide should be able to withstand a minimum load of 150 kg at any point without deformation. vii. Standards and Workmanship • The equipment must conform to IS: 9873 (Part I–III) / IS: 6661 / IS: 875 (as applicable) and international playground safety standards. Workmanship should ensure durability, stability, and child safety.

Double Slide:- i. FRP Coated Structure and Material • Main frame fabricated from MS (Mild Steel) tubular pipes of minimum 50 mm diameter and 3 mm thickness, conforming to ISI standards. • Supporting legs to be embedded in M-15 grade cement concrete block (1:2:4 mix) of size not less than 450 mm × 450 mm × 600 mm (depth). • Platform frame made of MS angle iron (40 × 40 × 5 mm) 42 MM OD PIPE with chequered sheet/8 mm FRP sheet / for anti-skid surface. ii. Slides • Double slide made of FRP (Fiber Reinforced Plastic) • Length of slide: 2.5 m to 3.0 m (approx.) from top to bottom. • Width of each sliding chute: 450-500mm MTR. • Height of starting platform: 1.80 mtr (approx.) above ground level. • Both slides should be properly curved and smooth finished to ensure safe sliding. iii. Safety Features • Handrails made of MS pipes- FRP coated (25 mm Dia, 2.5 mm thick) provided on both sides of stairs and top platform. • Safety guard/barriers of minimum 600 mm height at the platform to prevent accidental fall. • All sharp edges, welding joints and corners to be properly ground and rounded. iv. Ladder/Stairs • Ladder made of MS pipe-FRP Coated (32 mm dia, 3 mm thick) with non-slip rungs of MS flats (25 mm × 5 mm). • Angle of inclination of ladder approx. 60° for safe climbing. v. Finishing • All MS parts to be treated with anti-rust epoxy primer and FRP coating. • FRP surface to be glossy, UV-resistant and smooth finished. vi. Load Bearing Capacity • Slide should be able to withstand a minimum load of 150 kg at any point without deformation. vii. Standards and Workmanship • The equipment must conform to IS: 9873 (Part I–III) / IS: 6661 / IS: 875 (as applicable) and international playground safety standards. • Workmanship should ensure durability, stability, and child safety.

Climber :- i. Material FRP coated • Main frame: Mild Steel (MS) pipes of minimum 40 NB / 48 mm outer diameter, thickness 3 mm, conforming to ISI standards. • Climbing elements: High-strength steel pipes, Fasteners: M.S bolts, nuts, and washers with anti-rust coating. ii. Surface Finish • All MS components to be FRP coated with weather-resistant, non-toxic paint. • Welded joints properly ground and treated with anti-corrosive primer before painting or coating. iii. Dimensions (example for arch/net climber, modify as required) • Height: 2.0 – 2.5 meters. • Width: 1.5-2.0 mtr • Safe spacing between climbing bars: 250-350 mm. iv. Safety Features • All edges and corners to be rounded (no sharp edges). • Fall height should comply with IS 9873 (Part 9): Safety Requirements for Playground Equipment. • Rope joints/knots with galvanized clamps and protective sleeves. • Anchoring to be done with RCC foundation blocks (1.5 ft x 1.5 ft x 1.5 ft) using grouted bolts. v. Load Bearing Capacity • Minimum 100 kg per user, tested for at least 250 kg total load. vi. Standards Compliance • IS 9873 (Safety of Toys and Play Equipment). • EN 1176 (International Playground Equipment Safety Standard) where applicable. vii. Installation • Installation as per manufacturer’s guidelines. • RCC foundation cured for minimum 7 days before usage. viii. Maintenance • Annual inspection for structural stability. • Repainting and tightening of nuts/bolts every 12 months.

Six-Seater MGR i. FRP coated Material and Construction: • Main Frame: Made of heavy-duty MS (Mild Steel) pipes/tubes, minimum 48 MM OD PIPE Top and Bottom Plate: MS plates, minimum 3.0 mm thick, precision cut and welded. • Arms: Six FRP coated arms made of MS pipe (minimum 32 mm dia, 2.6 mm thick), equally spaced. • Seating Arrangement: Six ergonomically designed FRP (Fiberglass Reinforced Plastic) seats with back support, UV resistant, weatherproof, and anti-crack finish. • Central Shaft: MS solid shaft of 45-50 mm dia with double ball bearings for smooth rotation. • Bearing Housing: Heavy-duty cast iron/steel housing with dust-proof cover. • Footrest: Provided for each seat, made of MS rod 27 mm dia. ii. Dimensions (Approx.): • Diameter of Ride: 1.8 to 2.0 mm • Seating Capacity: 6 children (age group 5–12 years) • Height: 0.6 m – 0.75 m (from ground level to seat level) iii. Finish • All MS parts to be sandblasted, treated with anti-rust primer, and FRP-coated with multi-color finish. • FRP seats in bright, attractive child-friendly colors. iv. Safety Features • Rounded edges, no sharp corners. • Safe rotating speed due to self-regulated design. • Anti-skid footrest. • Bearing assembly fully covered for child safety. v. Installation: • Foundation with 1:2:4 RCC concrete blocks (minimum 400 × 400 × 600 mm), as per manufacturer’s design. • Installation to be done with proper grouting and alignment.

Multi Play Station: - i. General Structure • The Multi Play Station shall be modular in design and suitable for outdoor use. • Structure shall be designed for 25–30 children at a time, aged 5–12 years. ii. Material • Main Frame with FRP Coated: Mild Steel (MS) tubular sections, minimum 90,75,48,34, mm dia, 2.5 mm thick, FRP coated. • Platforms: Made of FRP (Fiber Reinforced Plastic) with anti-skid design. • Slides: FRP with smooth finish, minimum thickness 6 mm. • Climbing Frames: MS/FRP with anti-slip grips. • Roof/Canopy: FRP with UV-stabilized coating. • Fasteners: Galvanized / PLATING MS BOLT / SS bolts/ with safety caps. iii. Activities/Components Covering Area: 44` L X 22` W It contains: • FRP Spiral Slide 6mm thick inclined at 5` H - 1 no • FRP Tube Slide inclined at 5’ H - 1 no • FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3` H - 1 no • FRP Wave slide 6mm thick inclined at 5’ H - 1 no • FRP Stair 3mm thick inclined at 3`H-1 no • FRP Platform Hex. Shape 5mm thick in 7` Dia-2 no. • FRP ??n???-2 no. • FRP Diamond shape with MCF wording Engraved on canopy-2 n?. • FRP Fancy Railing Frog and Monkey Shape-4 no. • FRP Walking Bridge 7.5` Long-1 no. • M.S Spring Climber - 1 no. • M.S Zig-Zag Climber - 1 no • M.S Chain Net Climber - 1 no • M.S Climbing Ladder - 1 no • M.S Station in which vertical MS pipe-FRP Coated is of 3 `12 Guage of 1.S.I Mark-2 no • Parent–Child Face-to-Face Swing: - It allows an adult and a child to swing together, facing each other, on a single moving frame- Heavy-duty MS FRP Coated structure, ISI grade, FRP coated for corrosion protection. Pipe OD 75 mm (min.) × 3.0 mm thickness. Approx. L 10’ × W 6’ × H 8.5’. Dual-seat assembly with pivot arms that keep the adult and child seats facing each other. Heavy-duty bearings or self-lubricating bushes for smooth motion. Full-bucket seat with safety belt (infant/toddler) or FRP half-bucket for older children. Enclosed pivot hardware, anti-wrap bearings, rounded edges. Foundation with 1:2:4 RCC concrete blocks (minimum 400 × 400 × 600 mm), as per manufacturer’s design. Installation to be done with proper grouting and alignment-1 no. iv. Dimensions (Indicative – may vary slightly as per design) • Overall, Area: Minimum 44’ L x 22’ W • Platform Height: 4 ft. • Slide Length: 8–10 ft (2.5–3 m). • Tunnel Diameter: Minimum 650 mm. v. Safety Features • No sharp edges, corners rounded. • Safety guardrails (minimum 900 mm high) at all elevated platforms. • Adequate spacing between activities to prevent collision. • All equipment installed over soft ground/rubber flooring/sand bed. vi. Finishing • FRP coating / PU PAINT with non-toxic, lead-free colors. • FRP to be UV-stabilized, weather resistant. • Minimum 2-year warranty against rusting and color fading.

Fire Station Climber: - i. Structure and Material • Main Frame: Heavy-duty MS (Mild Steel) pipes of minimum 48 mm OD, 2.5 mm thick, FRP-coated / PU PAINT for rust resistance. • Platforms and Panels: 3.0 mm thick MS sheet with anti-skid surface, FRP-coated. • Fasteners: PLATING bolts, tamper-proof, with plastic caps. • SEATING: FRP (Fiber Reinforced Plastic) fire-station theme seat for 8 children in bright red with fire station logo. ii. Dimensions • Height: 2.0-2.4 m (depending on design). • Length: Approx. 2.5-3.5 m. • Width: 1.5-2.0 m. • Platform height: 1.2 m – 1.5 m. iii. Components • Fireman’s Pole: Vertical GI/MS pipe of 50 mm OD, FRP-coated. • Bridge (optional): Rope/metal bridge connecting two platforms. • Themed Panels: Fire station decorative FRP panels with cut-outs for windows/doors. • Wheel: 4 wheels, dia: 15-18 inch iv. Safety Features • All edges rounded and smooth for child safety. • Minimum 2 feet clear space around the climber for safety zone. • Compliant with IS 9873 (Part 1, 2 and 3) and EN 1176 safety standards for playground equipment. • No sharp projections or hazardous entrapments. v. Finishing • FRP coating / pu paint non-toxic and weather-resistant. • FRP parts: UV stabilized, fade-resistant, child-safe paints. v. Capacity • Suitable for 6–8 children at a time, age group 5–12 years.