Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.1 LAccepted-AOC BATHAIPAR RAWATPAR DEORIA DEORIA UTTAR PRADESH 274001 UDYAM UP 21 0039531 | DEORIA | UTTAR PRADESH | 274001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹48.7 L+₹8.7 L (21.8%)Rejected-Finance MANEGAON CHAMPANAGAR KHAMARIA JABALPUR 482005 MP | JABALPUR | JABALPUR | MP | 482005 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | Rejected-Technical 110 245 NEHRU NAGAR KANPUR UTTAR PRADESH 208012 | KANPUR NAGAR | UTTAR PRADESH | 208012 | - | Rejected-Technical Not Recommended as the contractor has not submitted the required category for the tender i.e c (vi). |
| Sl No | Description | Qty | Unit | ASHOKA ASSOCIATES L2 | ATUL TRADING CO L1 |
|---|---|---|---|---|---|
| 1.00 | Supply, fixing and testing of conventional manual call point 24V resettable type, each MCP installed on the loop shall have a unique address, set at the commissioning stage by means of a seven-segment DIL switch. The elapsed time between activation of the MCP and initiation of the sounders in an alarm condition via command from the fire alarm control panel shall not exceed three seconds complete in all respect as specified or indicated including testing on completion complete all as specified and directed by the Engineer-in-Charge. | 120 | Each | 500 ₹60,000 Lowest | 600 ₹72,000 |
| 2.00 | Repairing and testing of existing unserviceable and manual call point including opening, soldering of circuits, cleaning, replacement of glass, testing and painting complete all as specified and directed by Engr-in-Charge. | 60 | Each | 200 ₹12,000 | 100 ₹6,000 Lowest |
| 3.00 | Supply fixing and testing loop powered sounder strobe 24V. Dual tone hooter shall be of electronic type and shall give discontinuous/ intermittent audible alaram. The line matching transformer shall be provided complete in all respect as specified or indicated including testing on completion and complete all as specified and directed by the Engineer-in-Charge. | 120 | Each | 1,000 ₹1,20,000 | 600 ₹72,000 Lowest |
| 4.00 | Dismantling the existing loop sounder by disconnecting device by movable ladder, dismantling cap & sensor board, cleaning the parts using CRC solution and check the control wiring circuit the PCB board , communication panel, device controlled by a programme, device sound & fire red flash light indication while fire activate and re addressing & re installation work complete all as specified and directed by the Engineer-in-Charge. | 60 | Each Job | 600 ₹36,000 | 100 ₹6,000 Lowest |
| 5.00 | Programming the main fire alarm panel, detecting the device activating the sounder according to the device, checking the communication between the all the device, fire alarm and main panel using ladder, making main fire alarm to normal display without any fault complete all as specified and directed by the Engineer-in-Charge. | 32 | Each Job | 2,000 ₹64,000 | 300 ₹9,600 Lowest |
| 6.00 | Material & labour wiring for circuit / submain wiring along with earth wire with the cable FR LS, PVC insulated, un sheathed, copper conductor, multistranded, 1100 volts grade single core cables drawn through and including ERW steel conduit and conduit accessories surface / concealed in walls all as specified of size 2 x 1.5 Sq mm + 1 x 1.0 Sq mm for Smoke / fire detectors complete all as specified and directed by the Engineer-in-Charge. | 200 | RM | 275 ₹55,000 | 55 ₹11,000 Lowest |
| 7.00 | Supply,Installation and testing of fire alaram panel 8 Zone conventional type made out of CRCA sheet with powder coated finish of IP50 red colour suitable for operate on primary power 120-220VAC and stand by power 24 V DC , wall/celing mounted complete all as specified and directed by the Engineer-in-Charge. | 15 | Each | 12,000 ₹1,80,000 | 10,000 ₹1,50,000 Lowest |
| 8.00 | M&L for disconnecting/ removal of corroded MS sheet 3mm thick from fire fighting boxes and supply and fabricate 3mm thick CRCA sheet including necessary door hinges, door knobs, door locks, aldrops, over drops, door beading, rubber washers angles iron channel, clamps etc including applying 2 coats of synthetic enamel PO red paint over a coat of zinc chrome primer and fixing of 4mm thick transparent glass on the door as per existing complete all as specified and directed by the Engineer-in-Charge.
Note:(a).The rate quoted includes connected welding works/ gas cutting works along with all hardware/ miscellaneous items.
(b) Transparent glass sheet and lock & Key arrangement system will be measured separately. | 80 | Each Job | 5,000 ₹4,00,000 | 300 ₹24,000 Lowest |
| 9.00 | Supply and fixing transparent plain glass 4mm to 5mm thick as per site requirement and existing specification complete all as specified and directed by the Engineer-in-Charge. | 150 | Sqm | 300 ₹45,000 Lowest | 500 ₹75,000 |
| 10.00 | Supply and fix lock and key arrangement for fire hydrant chamber as per existing with two nos of keys for each lock complete all as specified and directed by the Engineer-in-Charge. | 150 | Nos | 250 ₹37,500 Lowest | 300 ₹45,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
8 Jun 2026, 6:00 pmClosed
GE (Utilities) Udhampur
GE (Utilities) Udhampur PO-Garhi Pin-182121
Repair/Maintenance of fire detection, Alarm and firefighting system of MAP accn under GE (Utilities) Udhampur
2026_MES_766219_1
GE/U-66/2026-27
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (Utilities) Udhampur
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (Utilities) Udhampur
₹90,000
11 Jul 2026
18 May 2026
10 Jun 2026
18 May 2026
8 Jun 2026
1 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, fixing and testing of conventional manual call point 24V resettable type, each MCP installed on the loop shall have a unique address, set at the commissioning stage by means of a seven-segment DIL switch. The elapsed time between activation of the MCP and initiation of the sounders in an alarm condition via command from the fire alarm control panel shall not exceed three seconds complete in all respect as specified or indicated including testing on completion complete all as specified and directed by the Engineer-in-Charge. | 120 | Each | - | - |
| 2 | Repairing and testing of existing unserviceable and manual call point including opening, soldering of circuits, cleaning, replacement of glass, testing and painting complete all as specified and directed by Engr-in-Charge. | 60 | Each | - | - |
| 3 | Supply fixing and testing loop powered sounder strobe 24V. Dual tone hooter shall be of electronic type and shall give discontinuous/ intermittent audible alaram. The line matching transformer shall be provided complete in all respect as specified or indicated including testing on completion and complete all as specified and directed by the Engineer-in-Charge. | 120 | Each | - | - |
| 4 | Dismantling the existing loop sounder by disconnecting device by movable ladder, dismantling cap & sensor board, cleaning the parts using CRC solution and check the control wiring circuit the PCB board , communication panel, device controlled by a programme, device sound & fire red flash light indication while fire activate and re addressing & re installation work complete all as specified and directed by the Engineer-in-Charge. | 60 | Each Job | - | - |
| 5 | Programming the main fire alarm panel, detecting the device activating the sounder according to the device, checking the communication between the all the device, fire alarm and main panel using ladder, making main fire alarm to normal display without any fault complete all as specified and directed by the Engineer-in-Charge. | 32 | Each Job | - | - |
| 6 | Material & labour wiring for circuit / submain wiring along with earth wire with the cable FR LS, PVC insulated, un sheathed, copper conductor, multistranded, 1100 volts grade single core cables drawn through and including ERW steel conduit and conduit accessories surface / concealed in walls all as specified of size 2 x 1.5 Sq mm + 1 x 1.0 Sq mm for Smoke / fire detectors complete all as specified and directed by the Engineer-in-Charge. | 200 | RM | - | - |
| 7 | Supply,Installation and testing of fire alaram panel 8 Zone conventional type made out of CRCA sheet with powder coated finish of IP50 red colour suitable for operate on primary power 120-220VAC and stand by power 24 V DC , wall/celing mounted complete all as specified and directed by the Engineer-in-Charge. | 15 | Each | - | - |
| 8 | M&L for disconnecting/ removal of corroded MS sheet 3mm thick from fire fighting boxes and supply and fabricate 3mm thick CRCA sheet including necessary door hinges, door knobs, door locks, aldrops, over drops, door beading, rubber washers angles iron channel, clamps etc including applying 2 coats of synthetic enamel PO red paint over a coat of zinc chrome primer and fixing of 4mm thick transparent glass on the door as per existing complete all as specified and directed by the Engineer-in-Charge.
Note:(a).The rate quoted includes connected welding works/ gas cutting works along with all hardware/ miscellaneous items.
(b) Transparent glass sheet and lock & Key arrangement system will be measured separately. | 80 | Each Job | - | - |
| 9 | Supply and fixing transparent plain glass 4mm to 5mm thick as per site requirement and existing specification complete all as specified and directed by the Engineer-in-Charge. | 150 | Sqm | - | - |
| 10 | Supply and fix lock and key arrangement for fire hydrant chamber as per existing with two nos of keys for each lock complete all as specified and directed by the Engineer-in-Charge. | 150 | Nos | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
TENDER66.pdf
Tender Documents • 1.15 MB
BOQ_858125.xls
BOQ • 10.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .