Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.8 LAccepted-AOC NO 1 4 56 Y SRI BHARATHI NAGAR OPP PARVATHI THEATER CUMBUM ROAD THENKARAI PERIYAKULAM THENI DT 625 601 | PERIYAKULAM | THENI | TAMIL NADU | 625601 | L1 | Accepted-AOC Reasonable | |
| 2 | L2₹45.5 L+₹73,919.05 (1.65%)Rejected-Finance ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹49.7 L+₹4.9 L (10.9%)Rejected-Finance | L3 | Rejected-Finance Not being lowest |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
9 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(South) Bangalore
Garrison Engineer (South) No 1 Ulsoor Road Bangalore 560042
As per Tender Document
2022_MES_523752_1
8593/E8
Open Tender
Civil Works
Item Rate
180 days
GE(South) Bangalore
As per NIT
6 documents required · 6 mandatory
₹500
Garrison Engineer (South) Bangalore
₹92,000
Yes
4 Jul 2022
12 May 2022
16 Jun 2022
12 May 2022
9 Jun 2022
26 May 2022
60 days
Amount
Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc n exc 10Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soils complete all as specified and as directed.
M & L cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.
M&L precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in block masonry with solid blocks, exc 10 cm in width and setting in mortar CM 1:6 complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and as directed
Spreading and levelling in layers n exc. 25 cm thick including consolidating the soils all as specified and as directed Note : Punned thickness shall be measured for payment purpose.
M&L 75 mm thick cement concrete type C-2 1:3:6 (using 40 mm graded crushed stone aggregate), as in sub base of floors all as specified and as directed
S & F Coloured non skid ceramic tiles 7 to 8m thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11Sqm in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
M&L glazed ceramic tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specified & directed by Engineer-in-Charge.
M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl finished even and smooth (without using extra cement) all as specified and as directed
M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 incl finished even and smooth (without using extra cement) all as specified and as directed
M&L for preperation of newly plastered surface and applying two coat of oil bound distemper over a coat of primers all as specified and as directed
M&L for preperation of newly plastered surface and applying two coat of cement base paint over a coat of primers all as specified and as directed
S&F factory made solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, completeall as specified and as directed
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, fixed in the frame at site all as specified and as directed
S&F second class hard wood plain, solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed
S&F 35 mm thick 2nd class hardwood rail and styled plain framed panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commerecial veneering on both faces. The size of rail and stiles as per IS : 1003 (Part-I), klin seasoned and chemically pressure treated all as specified and as directed
S&F 30 mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc., provided with stiles and rails as specified, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing galss, etc., size of member of shutters as specified in SSR Pt-I, section 8, clause 8.24 (a) all as specified and as directed
S & F 100mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium ally fixed all as specified and as directed
S&F 200 mm long aluminium anodised barrel tower bolts and extrude section and fixed all as specified and as directed
S&F 125 mm long extruded aluminium alloy handles, fabricated type anodised all as specified and as directed
M&L for 75 mm thick, PCC 1:3:6 type C1 (using 20mm graded stone aggregate), finished even and smooth without using extra cement.as in plinth protection incl providing expansion joints and filled with sealing compound Grade A complete all as specified and as directed
S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikers framed guard bars barred iron doors ladders; framed balusters walk ways railings framework of watertanks and similar work conforming to Fe-290 Gde-165 all as specified and as directed
S&F rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee, angle channel or flat sections) incl distance pieces, cleats etc., Conforming to Fe-410-W (Gde-E-250) quality-A all as specified and as directed
M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed
S&F anodised aluminium snap grid frame work for false ceiling, size of grid 605x605mm, complete all as specified and as directed
Hangers 6 mm dia G.I (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified and as directed
M&L 4 mm thick asbestos cement plain building boards, fixed to timber framework with screws as in ceiling all as specified and as directed
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet0.53 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed
S&F 4.0 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane all as specified and as directed
S&F mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips all as specified and as directed
S&F steel windows with side hung shutters incl projecting type hinges with steel handle and steel ped stay, complete with glazing bars dovetailed or welded all as specified and as directed
S&F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane all as specified and as directed
S&F galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed
S & F GI pipe 15 mm dia medium grade steel water tubing with fittings fixed on walls or laid in floor concealed type complete all as specified and as directed
S&F 75mm size PVC floor trap with grating incl jointing with solvent cement complete all as specified and as directed
S & F washdown water closet orrissa pattern size 580x440mm white with integral footrest and trap, including connection to drain and to flushing pipe incl making good to floor and flush pipe and joint between flushing pipe and sockets of water closet pan all as specified and as directed
S&F PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia all as specified and as directed
S & F vitreous china white wash hand basin flat back size 550x400 mm incl brackets chain & plug and waste pipe waste coupling etc all as specified and as directed
S&F 15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed all as specified and as directed
S&F 15 mm bore Fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed
S&F 75 mm bore PVC (SWR) bends any radius with access door all as specified and as directed
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed
Dismantling existing water proofing treatment any type and thickness from top surface of roof slab and removing the debris outside MD land complete all as specified and directed.
Demolition of cement concrete (unreinforced) in floors/roof and pavings n.exc 15 cm thickness (below or above ground level) and removing debrits out side the MD land complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof/floor complete all as specified and directed.
M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces mixed with integral water proofing compound as per manufacturer's instructions, surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid separately as supply only under relevant item of this schedule)
Supply only integral water proofing compound complete all as specified and directed.
M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017 mineral finish , 3mm thick and weighing not less than 3.80 kg per Sqm reinforced polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminous aluminium paint @0.10 Ltr per Sqm complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground floor) including removing the debris outside MD land complete all as specified and as directed.
M&L 75 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate), as in floors incl Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete green complete all as specified and directed.
M&L for acid resistance brick tiles 20 to 25 mm thick in floor laid over and including 20 mm thick screed bed mixed with acid resistance compound laid as per manufacturar instruction complete all as specified and directed.
Taking down cement plaster on brick or stone walls or concrete ceiling etc, incl raking out joints, hacking for key scrubbing down with water, etc. including removing the debris outside MD land complete all as specified and directed.
M&L for 15 mm thick rendering on stone masonry surfaces in cement mortar 1:4 mixed with integral water proofing compound as per manufacturer's instructions, surfaces finished even and fair complete all as specified and directed. (Note :- Water proofing compound shall be measured and paid for separately as supply only under relevant item of this schedule).
M&L for 5 mm thick rendering on concrete surfaces (ceiling) in cement mortar 1:3 finished even and smooth (without using extra cement) complete all as specified and directed.
M&L for 15 mm thick rendering on stone masonry surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L for complete removal of existing treatment of old treated surfaces of walls including washing, rubbing etc. and applying two coats of cement Base paint on walls, ceiling, chajja etc. over a coat of primer as manufactures instructions with all necessary scafolding etc complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparation of Old plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L complete removal of existing treatment and applying two coat of distemper oil emulsion over one coat of primer incl 2 mm thick wall putty plastered and other surfaces with chalk whiting on plastered surface complete all as specified.
Taking down chowkat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 Sqm all as specified and directed.
M&L preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of acid resistance paint over a coat of base coat all as specified and directed.
S&F in repairs 1.25 mm thick steel rolling shutters, without ball bearing, as specified incl top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push pull or mutual type all as specified and directed.
S & F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.
S&F in repairs ball bearing for rolling shutters complete all as specified and directed.
Demolition of cement concrete (reinforced) in manhole cover not exceeding 15 cm thickness (below or above ground floor) including removing the debris outside MD land complete all as specified and as directed.
M&L for providing precast RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in cover slabs (for manholes etc) complete all as specified and as directed.
S&F 4.0 mm thick sheet glass ordinary quality and glazing with wooden beads in square n.exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to wall including taking down of existing pipes with fittings complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends with access door complete all as specified and directed.
S&F 110 mm bore PVC (SWR) reducers complete all as specified and directed.
Dismantling wrought iron or mild steel works of any description not otherwise provided all as specified and directed.
S&F rolled mild steel in rolled sections as in framing for cladding, glazing and the like fixed with angles cleats and connecting plates etc., conforming to Fe-410-W (Gde-E-250) quality-A all as specified and directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.
Disconnecting existing tanks of capacity exc 500 ltr and n.exc 1000 ltr tanks, setting aside (or lowering if required) for repairs, cleaning etc, and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
S&F 1000 Ltr rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I all as specified and directed.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.
M&L preparation of old or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.
M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories & pressed steel terminal boxes and providing 3 mm thick ISI marked laminated sheet cover and brass screws with cup washers for fixing switches / socket / regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for the following specifications complete all as specified and as directed.
(a) One light point controlled by one switch
(b) One fan point controlled by one switch
(c) One socket oulet 5Amps on same board
(d) One socket oulet 5Amps on indepndent board
All as per item No 82 here in before but for socket outlet 15 Amps on independent board with cable size of 4 sqmm and earth continuity conductor cable of size 4 sqmm all as specified and as directed.
S&F switch piano flush type single pole one way 5/6 Amps all as specified and as directed.
S&F switch piano flush type single pole two way 15 Amps all as specified and as directed.
S&F socket outlet 5 pin 5/6 Amps flush type multipurpose complete all as specified and as directed.
S&F of switch piano15 Amp 230 Volt, flush button single pole one way complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin 5/6 Amps and 3 pin 15/16 Amps flush type all as specified and as directed.
S&F Fan Regulator step type 120W all as specified and as directed.
S&F ceiling rose surface tpe bakelite 65 x 50mm 3 terminals to be fixed on PVC block all as specified and as directed.
Supply and fixing surface mounted Mini Mirror light LED batten 2feet with extruded aluminium housing and robust construction 10 W system lumen with all accessories if required flexible copper 2 core wire from fitting to ceiling rose all as specified and as directed.. Make- Bajaj cat part No-BCLSB 10 WH or equivalant in Wipro/Philips
Supply and fixing surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 24 W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all as specified and directed by Engr-in-Charge. Make- Bajaj cat part No-BCLSB 20 WH or equivalant of Wipro/Philips
M & L for sub main wiring (surface) complete with Two single core 06 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable & one single core of 4mm FRLS PVC insulated (drawn through in and including 20 mm dia PVC conduit pipe accessories including elbow , tee )one single run of 6 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete all as specified and as directed.
Supply and fix of ceiling fan complete with electronic type regulator and accessories 230 V, 1200mm sweep, BEE 5 star rated, ISI standards, RPM1200,340 Air Delivery 200CMM, down rod length 267mm, rust - free powder coated finish and pre-wired and including connecting up with twin core twisted flexible copper conductor cable with connector including dismatling old one and deposit to AGE E/M Store yard complete. Make - Bajaj Kassels 50 ISI Product code 250468 or equivalent make of Havells/CG
Supply and fix Acid proof industrial Exhaust fan 500mm PP6 fins fixed angle type impeller 1 HP motor 1440 RPM 5000CFM/25mm enclosed body acid proof Frp lined IP-65 dust & moisture proof includingbvsuitable size make a hole for Exhaust fan and after fixing of fan reqd including making good the distrubed surfaces surrounding of fan work including dismatling old one and deposit to AGE E/M Store yard complete all as specified and directed by Engr-in - Charge Make- Palcotech engineering
Supply and Acid proof industrial wall mounting Air cicrlulator 600mm PP6 fins fixed angle type impeller 1 HP motor 1440 RPM 5000CFM/25mm enclosed body acid proof Frp lined IP-65 dust & moisture proof includingbvsuitable size clamp nut and bolt washer fixing work including making good the disturbed surfaces surrounding of fan work including dismatling old one and deposit to AGE E/M Store yard complete all as specified and directed by Engr-in - Charge Make- Palcotech engineering
S&F Sheet metal enclosure SPN for DB's when MCB's to be used with 200 amps bus bar double door 8 way all as specified and directed
S&F Sheet metal enclosure SPN for DB's when MCB's to be used with 200 amps bus bar double door 4 way all as specified and directed
S&F MCB TPN 'C' curve 240 volts rating 63Amp all as specified and directed
S&F MCB DP 'C' curve 240 volts rating 32 Amps all as specified and directed
S&F MCB SP 'C' curve 240 volts rating 32 Amps all as specified and directed
supply,installation,testing and commisioning factory made, Acid proof Chemical proof anti corrosive LT Panel board indoor type, powder coated made of 2.0mm thick CRCA Sheet,weather and vermin proof with double stud hinged door front and back open with internally locking arrangement and externally locking arrangement with aldrop bolt,shutter type windows at both sides of top and bottom duly internally secured with wire mesh,GI earthing strip stud at both bottom side,removable gland plate with compartmentalised cubical with 1.6mm thick CRCA sheet front opened double stud hinged door, all switch gears and changeover switch suitable to accomadate comprising of the following:
Incoming
(i) MCCB 400 amps,35kA, 415 Volt,50Hz, 4P With thermal based release-1no. (Make Indoasian /Hvaless/Legrand
(ii) MCCB 400 amps, front Handle Change over 35kA, 415 Volt,50Hz, 4P -1No. (Make Indoasian /Havelss/Legrand
(v) LED cluster indication lamp(R Y B) set of 3-1set
Busbar : Copper busbar 3 phase 4 wire of 400 to 630 Amps supported with ebonite insulation at 20cm interval -1set
Outgoing
(i) MCCB 200 amps,35KA, 415 Volt,50Hz, 3P With thermal magnetic release-01 Nos. (Make- Indoasian/havells/Legrand
(ii) MCCB 100 amps, 25KA, 415 Volt,50Hz,3P With thermal magnetic release-04 Nos. (Make -Indoasin/Havells/Legrand
(iii) MCB TPN 40 Amp -10 Nos
(iv) MCB TPN 63 Amp -10 Nos
(v) MCB SPN 30 Amp -04 Nos
M & L Earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth Strip 25x4mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed.
M&L in replacement of ETP plant 1HP motor three phase 415 volt 50Hz with pump acid proof ,chemical proof body painted for pumping of waste chemical water complete accessories nut bolt and washers etc complete installation with base frame with starter Make- Kirloskar Note :- Old Motor and pumps will be deposited to MES store yard
S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 4 way with 200 Amps rated bus bar, 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed
S&F MCB SPN 'C' curve 240 volts rating 6 to 40 Amp complete all as specified and as directed.
SREE CONSTRUCTIONS
SAI CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .