Karnataka

Active

Works

Buildings

Construction of Arts & Crafts Room for GMPS at Bommasandra village in Bommasandra TMC Anekal taluk phase 4 (Third Floor) (Sl. No. 244) Under PMSHRI GRANTS

Rural Development and Panchayat Raj Department

RDPR Division Office Bengaluru Urban | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 15 Sept 20264d left

Timeline

Published31 Aug 2026
Closes15 Sept 2026

Tender Value

Refer Docs

EMD Value

₹44,000

Closing Date

15 Sept 2026, 4:00 pm4d left

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

RAJU C S

Office Number

Work Description

Construction of Arts & Crafts Room for GMPS at Bommasandra village in Bommasandra TMC Anekal taluk phase 4 (Third Floor) (Sl. No. 244) Under PMSHRI GRANTS

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT27388/CALL-3

Reference Number

RDPR/2026-27/BD/WORK_INDENT27388/CALL-3

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Bengaluru Urban

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredAnnual Turnover Certificate - CA with UDIN No. last five years period. 2021-22 to 2025-26

RequiredPWD Registration Certificate- Class III and above

RequiredBid Capacity

RequiredBalance sheets , profit & loss statement certified by an Registered chartered accountant if not uploaded tender is rejected

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Submission of insufficient documents required for Qualification of tender document as per K.W.1 of SBD will be technically dis-qualified.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

PWD Department Registration Details

If the tenderers who have been failed to complete the work within the stipulated period in this Division pertaining to already entrusted works such tenderers will not entertained

List of existing commitments and ongoing work

List of works for which tenders already submitted

the tender bidders should furnish EMD as stipulated in tender Notification as furnished in Standard tender Bid Document K.W.1

the available tender capacity will be calculated as stipulated in Sec-3 of KW-1 Corrigendums.

Even though the tenderers meet the above criteria they are subject to be disqualified if they have made any misleading or false representations in the forms statements and attachments submitted in proof of the qualification requirements and or records of poor performance such as abandoning the works not properly completing the contract, inordinate delays in completion, litigation history or financial failures etc and or participated in the previous tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification

Labour cess will be deducted at 1% from Each Bill of the executed items from the Successful tenderers.

the tenderer shall furnish all requisite details as per Standard Bid tender Document . they must carefully read all the tender conditions as stipulated in I.F.t and K.W.1 and relevant document shall be furnished. Otherwise tenders will be rejected.

Corrigendum pertaining to tender are applicable as per Government Circulars.

Successful tenderer has to make their own arrangement for procurement of all materials and machineries required for the work.

the tenderer should complete the work within the stipulated period, otherwise Security Deposit amount will be forfeited .Action will be taken for black listing of such contractors.

the Photos and Video graphs should be taken before commencement, during execution and after completion of the work in presence of nodal officers

the tenderers who meets all tender conditions stipulated inK.W.1 are only eligible

the undersigned reserves the Right to accept / reject any/ all tenders without assigning any reason.

the defect liability period on contractor is one year from the date of completion of the work.

Conditional tenders will be rejected.

the work shall be implemented within the grants allotted by the Government.

Contractor has to make their own arrangements for procurement of all materials and machineries required for the work. there is no departmental supply of materials. Contractor should procure materials and as defined in specifications prescribed in ISI and submit necessary quality control certificates from the authorized agencies before execution.

Within 20 days of receipt of the letter of acceptance, the Successful tenderer shall deliver to the employer a security deposit in any of the forms given below for an amount equivalent to 5% of contract price plus additional security for un balanced tenders. Bankers cheque /DD/pay order in favour of EE Panchayath Raj Engineering Division, Bangalore Urban District, Bangalore/Specified small savings instrument pledged to EE Panchayath Raj Engineering Division, Bangalore Urban District, Bangalore otherwise the E.M.D. will be forfeited and necessary action will be initiated against the tenderer as per tender Clause

the Furnished E.M.D. will be released only after successfully execution of the tender Agreement by the successful tenderer or 30 days from the date of submission of tender whichever is earlier.

Each item rates are Exclusive of GST 18%. bidder should quote the rates exclusive of GST for each item.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹44,000

Important Dates

Last Activity

4 Sept 2026

Published

31 Aug 2026

Download Ends

11 Sept 2026

BOQ Preview

•

Construction of Arts & Crafts Room for GMPS at Bommasandra village in Bommasandra TMC Anekal taluk phase 4 (Third Floor) (Sl. No. 244) Under PMSHRI GRANTS

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Providing and constructing load bearing wall with Solid Concrete blocksof size 400x150x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS2185...

•

Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes m...

•

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...

•

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth re...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever requir...

•

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufactur...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and s...

•

Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in-cluding water thinnable priming coat with cement primer after t...

•

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

•

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after thorougly cleaning ...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications - Third Floor with all lead, lift, loading,...

•

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

•

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as pe...

•

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for pro...

•

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...

•

Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and ...

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting,finishing with necessary cement plastering - 12" x 12" x 3" (300 x 30...

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting,finishing with necessary cement plastering - 10" x 7" x 3" (254 x 178...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall -...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 - 6/16Amps universal socket with all lead, lift, loading, unloading, labour, ...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ba...

•

Fixing a ceiling /wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KPPP-kw-1-27388-OTHERS-CALL-3.docx

Tender Document • 1.85 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .