Upgradation of Service lines of Shafts and terrace loop line in Shantinikrthan, Udaygiri, Kanchanjunga and Gulmarg buildings (Package III) at Anushaktinagar, Mumbai.

Amount

ABSTRACT SHEET

Total of Part I - Civil Works

Total of Part V- Rebated Items

Description of Work / Item(s)

Amount

PART-A(Upgradation of PH-Service-lines)

Supplying & fixing on Exposed surfaces the following sizes uv-stabilized Chlorinated Poly Vinyl Chloride ( CPVC ) pipes & Fittings or ASTM pipes & fittings of specified class having thermal stability for both hot & cold water supply consisting following items of work:- i) Supplying CPVC pipes and CPVC plain / brass threaded fittings, SDR - 11 having thermal stability for hot & cold water supply conforming to IS 15778 or ASTM pipes & fittings with ISI mark /equivalent approvals as per relevant standards. ii) Laying and fixing the pipe and specials on exposed surfaces / underground, to correct line, level and plumb for water supply line, using metal straps ( On wall surfaces ) at 1.00 mtr. interval or as directed by the EIC. iii) Jointing the pipes and Specials using Solvent cement conforming to IS 15225 & Teflon tape ( For threaded joints) of approved makes including cutting the pipe to required size, preperation of surfaces, necessary tools etc. all complete. iv) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. v) Testing the pipe line to a hydraulic pressure as per manufacturers cataglouge for leak proof joint or as per relavant code Pipes & Fittings SDR-11(Upto 50mmdia) as per IS 15778

15 mm n.size

20 mm n.size

25 mm n.size

32 mm n.size

40 mm n.size

50 mm n.size

63 mm n.size (as per Sch-80)

80 mm n.size (as per Sch-80)

Supplying, fixing & concealing on wall / beams /colums etc. the following sizes uv-stabilized Chlorinated Poly Vinyl Chloride ( CPVC ) pipes & Fittings of specified class having thermal stability for both hot & cold water supply consisting following items of work:- i) Supplying CPVC pipes and CPVC plain / brass threaded fittings, SDR - 11 having thermal stability for hot & cold water supply conforming to IS 15778 with ISI mark or equivalent of approved make as per relevant standards. ii) Laying and concealing the pipe and specials for water supply by cutting / making 75 mm X 75 mm grove on the wall, fixing the pipe using metal straps wherever required and filling the grove with cement mortar mixed with water proofing compound, after laying and testing the pipe line including making leak proof joints using cement solvent / Teflon tape (For threaded fittings) of approved make, cutting the pipe to required length, preperation of surface,necessary tools etc. all complete, iii) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. iv) Testing the pipe line to a hydraulic pressure as per manufacturers cataglouge for leak proof joint or as per relavant code Pipes and Fittings SDR-11 as per IS 15778

15 mm n.size

20 mm n.size

25 mm n.size

Providing & fixing CPVC Ball Valves of 'SUPREME' make suitable for hot & cold water conforming to the pipe pressure class, making water proof joints, including the cost of jointing material and CPVC specials if required & testing the joints alongwith the pipe line etc. complete as per directions of engineer-in-charge.

Supplying & fixing following size C.P brass Coupling with approved quality C.P brass Mosquito proof jalli including providing cPVC specials, if required for fixing the coupling, jointing materials such as teflon tape etc. complete as specified & directed for overflow / vent pipe of water tank.

65 mm dia

50 mm dia

20 mm dia.

Providing, instaling, fixing, connecting, testing 74 micron Super Flow - Screen filter, of M/s. Jain Irrigation Systems Ltd., of following Model Nos, fitted with pressure gauge, water drain and emptying plug etc all as per specifications, drawings and as directed by EIC.

For 80 mm dia cPVC pipe DJPSF12, Max. working pressure = 10 kg/cm², Flow rate = 25 m³/hr, Inlet/Outlet Connection = 50 mm

For 65mm dia cPVCpipe DJPSFP25SW, Max. working pressure = 10 kg/cm², Flow rate = 40 m³/hr, Inlet/Outlet Connection = 2.5"

Supplying, fabricating and fixing in position GI structural steel of angle, joists, channel, I Beam, plain / chequered plates for monorail / MS gates /supports of required size including cutting, fabricating, welding, erecting in position including supplying & fixing embedded parts for fixing monorail / supports in concrete, including painting with two coats of approved synthetic enamel paint over a coat of zinc cromate red oxide primer all complete all as per specification and as directed by the Engineer in Charge

Using angle, sloted angles, Joists/ 'I' beam, Channel Extruded Hollow sections such as SHS, RHS etc.

Supplying & fixing following Stainless Steel (grade 304L) spool pieces of required diameter having flange on one / both sides (Table E) with flange hole, 450 mm or standard available length, providing 3D x 3D and 4 mm thick stainless steel puddle plate (minimum 150mm x 150mm) welded to it where D is the outer diameter of pipe including cutting the plate to required shape and fixing in the reinforcement at the center of RCC wall / slab including cutting the form work provided for concrete at required level, height etc. Complete all as E.I.C. per specifications and as directed by

20 mm to 300 mm dia.

Providing & fixing stainless steel pipe hand rail at main staircase & lobby, all floors & levels conforming to 304 grade of steel, of schedule 10-S, having 300mm height approximately, pattern is 38mm dia.NB Pipe in horizantal, 16mm dia. NB pipe in vertical all as per pattern & design in drawing including necessary S.S bend, tees, welding / nut-bolt necessary anchoring polishing and fixing in concrete/brick wall with S.S lugs, making pockets, concreting, making good the surfaces etc. as per specifications drawings and as directed by Engineer in Charge.

Providing GRP/FRP composite Mosquito proof hinged cover with frame (Having loading capacity not less than 500 Kg) of 'EVERLAST' having suitable locking arrangement for Manhole opening of water tank, fixing the cover by providing corrosion resistant studs, nuts, built-in hold fasts etc. by chasing or cutting holes and grouting with cement mortar 1:1 by adding approved water proofing compound @ 2% by weight of cement, all complete as per specification and as directed by EIC.

530 mm dia.

Making flanged joints for GI/ PPR/ PVC/ UPVC/ CPVC / HDPE pipes and specials including providing following dia. GI/ PPR/ PVC/ UPVC/ CPVC/ HDPE heavy quality flanges with holes drilled to IS standard, making flanged joints including all jointing malerial like appropriate collar / neck piece, SBR Gasket, M.S. bolts & nuts of suitable size etc complele, including testing joints hydraulically to a pressure & duration as specified alongwith the pipeline and rectification of leaky joints if any, and making connection with existing /new pipeline work, all as per specifications and as directed by the Engineer-In-Charge. Note: All Flange joints for PH works will be paid under this item

40 mm dia and above upto 110mm dia with providing Double new flange of DI/GI/MS

40 mm dia and above upto 110mm dia only jointing (without providing flange )

Supplying and fixing following size uPVC UV-Stabilised soil / waste quality pipes and fittings ( SWR ) for soil, waste, vent, antisyphonege, HVAC waste pipe and rain water pipe lines consisting following items of work:- i) Providing and fixing uPVC UV-Stabilised Soil /waste pipe as per IS:13592 and IS:14735 Grade-B laid in floor & on Exposed faces of wall of Supreme make ii) Fixing the pipeline vertically by Metal clamps with rubber seal of Supreme make Cat. No.SWRMCR 1 to 6. iii) Providing and fixing uPVC cowl at the top of soil, waste water & vent pipe line. iv) Laying the pipe below floor / ground to proper slope and gradient for making connections of soil /waste water pipe line with inspection chamber or Manhole, including the cost of cement mortar, cement concrete, water proofing compound etc. v) Jointing the pipe with Solvent Cement & Rubber ring gasket with making holes in walls / floor grooving and redoing the same and brick support etc. Giving water-tightness test for the pipes laid as per codal provisions. Providing Ring Joint pipes at verticals and solvent cement jointed pipes at consealed locations. vi) Necessary cutting to the required length Tank / WC connectors etc. including short pieces, fittings with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees,elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, For Soil & waste and Vent pipe lines

50 mm dia.

75 mm dia.

110 mm dia.

160 mm dia.

Providing uPVC Floor Trap / Nahani Trap of following size having not less than 40 mm effective water seal, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, providing and fixing 200 x 200 mm size top tile with central strainer & flat cover / flush strainer, closing the side inletes with plugs if required etc. all complete as per specification and as directed by EIC

Multifloor trap of 110 x 75 x 50 size of Supreme make Cat No. NSPHMTS04L / NSPHMT005L and 3 pc top tile & flush strainer, mat finish of Supreme make Cat No. NSPHTT201L/NSPHTT200L.

Providing uPVC cleanouts of following sizes and fixing along the uPVC Waste / soil pipe lines laid below the floor for inspection / choke removal including the cost of jointing material NOTE: uPVC specials/fittings used for fixing the cleanousshall be paid under the relevant item )

Providing HDPE sheet flashing fabricated by welding HDPE flexibal sheet with 160 / 110 mm dia HDPE pipe about 400mm long for PVC rain water pipes, fixing with cement mortar 1:2 mixed with water proofing compound and forming the proper shape and grade and compound andforming the proper shape and grade and finishing with inlet mouth of rain water pipe, cutting RCC slab or wall if required,including the cost ofbitumen, cement mortar etc. all complete as specified and as directed by the Engineer-in-charge. NOTE: For fixing HDPE sheet on RCC / Cement Concrete bottom surface shall be sticked watertite by synthatic glue as per manufacturers recomandation (Glue type as per manufacturers recomandation). Top potion shall be spread with approved synthetic glue and fine 0.5mm sand shall be spinkled over it and allowed to be dried. after drying it is to be embaded using cement morter 1:2 as per required shape and form.

450 x 450 mm size HDPE sheet Flashing fabricated from 8mm HDPE sheet and PN 6 grade 160 mm dia HDPE pipe

Providing and fixing Stainless steel Dome meshfabricated by welding from 2mm dia 304L gradestainless steel wire for PVC rain water pipes(sheet flashings), with 5mm x 10mm L base ring of0.5mm thickness 304L grade Stainless steel. Lring to be embaded in waterproofing & dom to beplaced on it,including the cost of fixing materialetc. all complete as specified and as directed bythe E.I.C.

Half Spherical Dome having opening 5 to 10 mm of 160mm ID

Providing uPVC Gully Trap of 150 X 100 mm sizewith 100 mm outlet with Grating of approvedMake, placing at correct position, embedding incement concrete 1:2:4, 100 mm thick alroundcomplete.

Constructing brick masonry Gully Trap chamber offollowing size and upto 600 mm initial depthincluding providing and fixing gully trap,consisting following items of work:- i) Providing square mouth uPVC gully trap of size150 X 150 mm with 110 mm outlet of ApprovedMake embedding in position in cement concrete1:2:4 inside the chamber .ii) 230 mm thick brick masonry in 1:4 cementmortar over 150 mm thick cement concrete 1:2:4. iii) 15 mm thick plaster in cement mortar 1:3 oninternal and external surfaces, internal surfacesand top finished with a floating coat of neatcement .iv) Providing and fixing precast EVERLASTComposite (FRP/GRP) Manhole covers & frame ofsize 300mm x 300mm as approved by E.I.C havingpoint loading capacity not less than 0.3 tonneapproved, including cost of necessary hardwareand cement concrete / mortar for fixing theframe.

Construction of 300 X 300 mm internal size Gully Trap chamber including Providing & fixing Gully Trapwith frame & cover all complete.

Providing & laying UPVC under ground drainagepipes & Fittings of Approved make for storm water drains & Sewer lines of following size conformingto IS:15328 to proper level & grade, jointingincluding prviding coupler with cement solvent /welded joints / as per manufacturer'srequirement, encasing the pipe alround usingcement concrete 1:3:6 complete all as perspecifictions, drawing and as directed by the E.I.C.item includes Providing and fixing UPVC fittingssuch as Bendes, Tees & Y, Reducers, BlankingPlugs, Couplers, Adaptors etc For Sewer line and Storm water Drains

110 mm DN (SN 8kN/m²-SDR34)

160 mm DN (SN 8kN/m²-SDR34)

Constructing brick masonry Inspectionchambers of internal sizes 900 X 600mm atbottom and 900 X 450mm at top for an initialdepth of 600mm consisting following items ofwork. i) 230 mm thick brick masonry in cementmortar 1:2 over 150 mm thick bed in cementconcrete of grade 1:2:4 with 150 mm offsetalround, tapering the longitudinal walls to aheight of 450 mm from top of chamber cover toobtain an internal dimension of 900 X 450mm ii) 20 mm thick plaster in cement mortar 1:1mixed with water proofing compound @ 2% byweight of cement on internal and externalsurfaces, internal surfaces and top finished witha floating coat of neat iii) Making benching and haunching in cementconcreteof grade 1:2:4 and finishing withfloating coat of neat cement. iv) Fixing frame and cover at top using cement concreteof grade 1:2:4 (for bed block / bearing course andcapping) and cast iron steps / foot rests, all as perspecification and as directed by Engineer in Charge Making ramp, connecting incoming & outgoing sewers & U-channel (Upto initial depth of 600 mm between the inverts of incoming & outgoing sewers) of height and width not less than the branch pipe dia. in CC 1:2:4, plastering 20 mm thick in CM 1:3, finished smooth with a floating coat of neat cement all complete. NOTE:-Providing & fixing foot-rests / steps and CI / RCC /Composite frame & cover, CC of grade 1:2:4,plastering in C.M 1:2 on exposed surfaces of bedblock & capping,making smooth cement finish etc. willbe paid under relevant item.

Inspection chamber of internal sizes 900 mm X 600 mm at bottom and 900 mm X 450 mm at top for an initial depth of 600mm.

Extra over above item for depth beyond 600 mm initial depth & upto a depth of 1800 mm. all as per specification and as directed.

Providing & fixing GRP/FRP Composite frame withCovers / Gratings of M/s Everlast or approvedmake, tested for load designation as per IS:1726 including the cost of 1:2:4 grade concrete for fixing frame, bed block (bearing course) and capping including necessary form work and C.M 1:2 mortar for fixing the frame & for plastering exposed surfaces of concrete bed block and capping finished smooth withfloating coat of neat cement etc., complete as perspecifications, drawings and as directed by theE.I.C.

Circular Heavy duty (Grade HD-20 load Designation as per IS:1726) frame and cover clear internal dia. 530mm

Square Heavy duty (Grade HD - 20 load designation as per IS:1726) frame and cover suitable for 300 x 300mm (Clear) valve chambers/Gully trap chambers/drop cleaning chambers etc. NOTE: Shade and Colour and design pattern to be get approved from Engineer-in-Charge.

Cement concrete of specified grades at all locations & depths for the following works using graded stone aggregate of 20mm. maximum size including necessary form work, machine mixing, transporting, placing in position consolidation, finishing, curing etc. complete as per specifications, drawings & as directed by the EIC.

PCC 1:2:4 in bed concrete, pedestal, encasing etc.

Providing, Casting and fixing concrete blocks of PCC 1:1.5:3 Mix concrete to support water supply lines including shuttering etc. Complete all as per specification and drawing and as directed by Engineer- in- Charge.

Supplying, fabricating and fixing in position at all floors factory made Aluminium sliding/top hung/fixed/ adjustable louvered windows & ventilators with rivet joint of specified size, made of integrated bronze anodised matt finished (15micron thick) aluminium section (extruded) , including for making exhaust fan frame work, handles of specified size etc, of approved manufactures for following types with extruded sections of Jindal / Indal / Aluminax or other approved equivalent make of approved sections with size and weights as directed for frames and shutters(including wastages if any) confirming to relevant IS specifications with all approved Bronze anodised aluminium fittings and accessories, latching fixture, 2/3 rollers with ball bearing of superior quality all as shown in the drawing including providing and fixing aluminium channel beading/glazing clips fixed with necessary bronze anodised screws, grouting the gap with sealant and including dismantling of existing window frame and shutter, glass and depositing same to dept store etc all complete generally as per drawing, specifications etc, all as directed by EIC. Note: Plate handle of 150 mm long & 6 mm thick will be considered for payment, nothing extra will be paid for other fittings & fixtures

18 mm thick machine cut and single side machine polished Baroda green marble stone for window cill in stepped form laid over 20 mm thick 1:4 cement mortar & overlapping of 20 mm shall be fixed with Araldite adhesive with best workmanship, including half round moulding & polishing of exposed face etc complete.

Upto a depth of 1.5 M. from ground level.

Brick masonry at all heights using well burntBricks from approved lots of classdesignation 35 classification as per IS1077-1992 and min. average compressivestrngth not less than 3.50 N/sq.mm ) usingCM 1:6 in 230 mm walls to correct line, level& plumb including raking out joints, curing,scaffolding etc. complete as per specifications,drawings and as directed by EIC for pipesupports, pedestals etc. in cement mortar 1:6for pipe support

Providing 15 mm thick internal plasteringusing Ready mix internal plastering in CM 1:4or as per approved manufacturersspecification of approved make for pedestalspipe supports, brick walls, stone masonry,concrete surfaces etc. with floating coat of neatcement, including preparation of the surface,curing, cleaning, scaffolding complete all asper specifications and as directed at site bythe Engineer-in-charge

Supplying & fixing 10 mm thick PVC integral free foam sheet in form of flush finish door shutter, manufactured by M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet) or other equivalent approved make of approved colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides, all edges to be smooth finish with mixture of PVC powder & solvent etc complete all as per specification and as directed by the EIC.

Providing and making cores of 65 mm / 50 mm dia. to the overhead water tank using electric operated core cutting machine and plugging of old damaged/ abandoned pipes holes with waterproofing cement mortar all complete as directed by Engineer-In-Charge.

Providng and fixing of 65 mm/ 50 mm dia pipe sleeves upto 450 mm length and making outer surface rough for scour/ outlet pipe with plug and fixing it to core made at the directed place by using polymer mortar and making the core waterproof etc. complete all as directed by the Engineer-In-Charge.

Providing following size class-I Peet / GateValve of brass or Gun metal, with Cast ironwheel, conforming to IS 778 upto 300 mmsize, fixing the Valve to pipe line includingthe cost of jointing materials, testing for leakproof joints at 10 kg / sq.cm hydraulicpressure, all complete as per specificationand as directed by EIC.

20 mm dia.

25 mm dia.

32 mm dia.

40 mm dia.

50 mm dia.

65 mm dia.

80 mm dia.

Supplying & fixing on Exposed surfaces the following dia. Galvanised iron pipe of specified class consisting following items ofwork: i) Supplying galvanised mild steel screwedand socketed pipe conforming to IS 1239 (part-I ) with galvanised mild steel or wrought steel fittings conforming to IS 1239 ( part-II) ii) Laying and fixing the pipe and specials onexposed surfaces to correct line, level andplumb for water supply line, overflow andvent using M.S. nails, rawl plugs, woodengutties and 'U' type G.I clamps having not lessthan 2 mm thick. iii) Making leak proof threaded joints usingWhite zinc, Spun yarn etc. including cuttingthe pipe, threading and the cost of jointingmaterials. iv) Cutting or making hole or chases in RCCor brick work structure such as wall, column,beam, slab, chajja, dado etc. for passing thepipe line and reinstating all the damage to itsoriginal condition. v) Testing the pipe line to a hydraulicpressure of 10 Kg / Sq.cm for leak proof joint. vi) Painting the pipe line after testing withtwo coats of flat oil paint of approved makeand shade over a coat of approved primer.Class " C " ( Heavy quality ) G.I. pipe & fittings. Note: The rate shall also include for GI pipe line & specials required for making connections with the existing GI pipe line laid by other agency.

Supplying and laying below the ground orfloor, the following diameter galvanised ironpipe line of specified class, consisting thefollowing items of work:- i) Supplying galvanised mild steel screwedand socketed pipe conforming to IS 1239 (part-I ) with galvanised mild steel or wroughtsteel fittings conforming to IS 1239 ( part-II). ii) Laying pipes and specials below theground or floor for water supply / Waste linein proper level and gradient. iii) Making leak proof threaded joints usingWhite zinc, Spun yarn etc. including cuttingthe pipe, threading, the cost of jointingmaterials etc. iv) Testing the pipe line to a hydraulicpressure of 10 kg / sq.cm for leak proof joints. v) Providing & wrapping 'Pypekote' (corrossion protected tape ) of 4 mm thickincluding supplying & application of pipecoating and spiral wrapping etc. ( wrappingshould have an overlap of 15 to 20 mm )complete as per standards for corrosionprotection of pipes that are laid underground/ floor. Class " C " ( Heavy quality ) G.I. pipes & fittings.

Supplying & fixing 25 mm thick PVC integral foam sheet in form of flush finish door shutter, manufactured by M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet) or other equivalent approved make of white colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides including providing recessions for hinges and providing & fixing 3 nos 100 mm heavy duty S.S. hinges and 1 No. of Aldrop wirh pad lock provision, 2 nos. of 100 mm Al. Bow handles with back plate of M/s Shalimar Hardware or equivalent and including providing a vision panel opening of size 300 mm X 200 mm including providing and fixing PVC moulded louvers on both faces in the opening of vision panel with ss screws, all edges to be smooth finish with mixture of PVC powder & solvent, including removing existing door shutter & fittings etc complete all as per specification & as directed by the Engineer-in-Charge.

Providing & fixing European water closet / Anglo Indian WC of approved make with 'P' or 'S' trap wash down pattern European water closet best indian make in white glazed vitreous of size 460 mm x 330 mm and including cost of removing the existing one & disposing of debris etc complete all as per specifications and as directed by the Engineer-in-Charge,

Providing & fixing Orissa pattern W.C. of approved make comprising of Orissa pattern W.C. with 'P' or 'S' trap best Indian make in white glazed vitreous china ware of size 580 mm x 400 mm including the cost of removing the existing damaged / broken and making good the surrounding with cement mortar / concrete tiles maching to the existing finish & disposing of debries etc complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and applying three or more coats of acrylic elastomeric water proof exterior coating of Raincoat of M/s. Dr.FIXIT Apex Stretch of M/s. Asian Paints / Weather shield Max of M/s. ICI Deluxe or other approved equivalent make and shade over the sand face / synthetic plaster / form finished surfaces / rough cast plaster at all locations as required, thoroughly mixed and applied at an interval of 6-8 hours for each successive coats and ensure consumption of 0.46 liter/Sqm for 3 & more coats, including preparation of surface, cleaning and filling the cracks and crevices with Latex caulking crack filler etc. complete generally as per the manufacturer's specification and as directed by the EIC.

Description of Work / Item(s)

Amount

PART V : REBATED ITEMS

Rebate for Taking away dismantled item by the contractor

a) GI Pipes of various dia

b) CI pipe of various dia

c) GM gate valves of various dia

d) wooden batterns

GI/MS scrap

MARUTI ENTERPRISES

G-TECH CONSTRUCTION & FABRICATORS

Renjin Construction

ANS Constructions.com

G-TECH CONSTRUCTION & FABRICATORS

Renjin Construction

G-TECH CONSTRUCTION & FABRICATORS

Renjin Construction

MARUTI ENTERPRISES