Painting of 236 Nos. of steel poles in LT Overhead line to prevent corrosion with Providing and fixing mandatory sign boards for display SLD,SOP etc. at power generator station of Amrapali OCP and Shivpur Railway Siding under A-C Area

Amount

Applying Priming coation with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galavanised iron/ steel works

Paintaing with aluminium paint of approved brand and manufacture to give an even shade: one or more coats on new work

Paintaing with aluminium paint of approved brand and manufacture to give an even shade: one or more coats on old work

Providing and fixing M.V. Danger Notice plate of 200mm X 150mm, made of mild steel, atleast 2mm thick and vitreouse name led white on both sides and with inscription in single red colour on front side as required.

Manufacturing, supplying and fixing retro reflective sign boards madeup of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm

Total impact of GST for the purpose of CTC