REPAIR/RENEWAL INTERNAL ELECTRIFICATION AT OFFRS MD ACCN AND SF OFFRS QTRS JCO AND OR MD ACCN QTRS AND OTM ACCN IN ZONE D E F AREA OF AGE E/M UNDER GE (W) LUCKNOW

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bell, bell push, light fitting etc for taking credit and making good disturbed surfaces of walls, floors,etc.as directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC(FRLS)insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC (FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per Item No 2 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per Item No 2 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per Item No 2 above but for One bell/ buzzer point controlled by one bell push

All as per Item No 2 above but for One light point controlled by two two way switch.

All as per Item No 2 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn into and including suitable size surface conduit/casing caping, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per Item No 4 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per Item No 4 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per Item No 4 above but for One bell/ buzzer point controlled by one bell push

All as per Item No 4 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn into existing conduit, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per Item No 6 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per Item No 6 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per Item No 6 above but for One bell/ buzzer point controlled by one bell push

All as per Item No 6 above but for One light point controlled by two 2 way switch

All as per Item No 6 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

M&L for point wiring with single core FRLS PVC insulated 1100V grade cable with multistranded copper conductor of size 1.5 Sq. mm (Nominal area) drawn in and including non metallic rigid PVC concealed conduit, medium grade ISI marked not less than 20 mm dia, concealed in wall, ceiling with saddles, screw & Plugs with all fittings including tee, junction boxes and drawing continuous earth wire of FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 1.5 sqmm and terminated in and including sunken box for modular switches/sockets, regulators etc complete all as specified and directed.

(a) One light/fan point controlled by one switch

(b) One socket outlet point 5 Amp on an independent board

(c) Same as item no 2 (b) but on the same board

All as per Item No 8 above but for One bell/ buzzer point controlled by one bell push

All as item no 8 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board.

S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as directed.

S & F switch piano flush button single pole one way 15 Amp 240 volt complete all as directed.

S&F switch piano flush button single pole two way 5 Amp 240 volt complete as directed.

S&F socket outlet flush type multipurpose 2 in1, 3 pin 5 and16 Amp, 230 volts complete as directed.

S&F socket outlet flush type multipurpose 2 in 1, 5 pin 6Amp, 230 volts complete as directed.

S&F fan regulator electronic,step up socket type,230 volt,125 W and conection complete all as directed

S&F modular switches 1 way 6A,1 module. complete all as specified and as directed.

S&F modular switches 1 way 16A,1 module,complete all as specified and as directed.

S&F modular 6 A sockets-5 pin 2 module complete. complete all as specified and as directed.

S&F modular 6A/16A sockets-3/5 pin combine 2 module.complete all as specified and as directed.

S&F Modular white cover plate with frame 8 module.complete all as specified and as directed.

S&F Modular white cover plate with frame 6 module.complete all as specified and as directed.

S&F Modular white cover plate with frame 4 module.complete all as specified and as directed.

S&F Modular white cover plate with frame 3 module.complete all as specified and as directed.

S&F Modular white cover plate with frame 2 module.complete all as specified and as directed.

S&F modular bell push single pole one way 6/10 Amp, 240 volt,1 module, fuesh type as directed.

Supply and fix modular type blanking plates, one moudle complete all as specified and directed.

Supply & fix modular fan regulator 120/100 W, 2 Module for ceiling fan fixed, in board and connecting as directed, after dismantling and removing unserviceable regulator.

S&F ceiling rose surface bakelite three terminal complete as directed.

S&F bell push single pole one way 5 Amp, 240 volt fuesh type as directed.

S&F call bell AC single pole 240 volt ding dong Type.

S&F angle type holder insulated body with back plate suitable for batten fittings as directed.

Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 and IK 08 protection cover suitable for bulk head fitting integrated type 10/7W LED, 6500K , 120 lumens/watt, CRI -80 including inbuilt electronic driver complete all as specified and as directed.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 8/10 W, 6500 K, 230V , minimum 120 lumens/watt, CRI -80 with extruded aluminium housing without powder coating integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements all as per specified and directed by Engr-in-charge.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 18/20 W, 6500 K,120 lumens/watt , 230V , CRI -80 with extruded Aluminium housing without powder coating 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours ,2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.

S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, with 01 No. 9/12 W LED Bulb, 230 V, 6000K, CRI -80 complete incl all required electrical connecting arrangements all as specified and as directed. ( Note: Rates incl 01X 7/9 W LED Bulb with each fitting)

S& F in repair Decorative wall light fixture made up of Metal base, synthetic white in colour and round metal base with bend pipe integrated LED type, 230 V, 3000K, complete incl all required electrical connecting arrangements all as specified and as directed.

S&F in repairs Flexiion 5 Mtr LED strip 22 W, 3000K/6000K as required on site with driver with wide viewing angle for good light distribution, easy to install.

S&F in repairs of surface type round LED 10/12W downlighter 6500K 2.5 KV inbuit surg protection minimum 110 lumens/watt, 50k burning hours Aluminium housing PDC , CRI -80 all as per specified and directed.

S&F in repairs of surface type square LED 10/12W downlighter 6500K 2.5 KV inbuit surg protection minimum 110 lumens/watt, 50k burning hours Aluminium housing PDC , CRI -80 all as per specified and directed.

S&F in repairs of recess type round /square LED 10/12W downlighter 6500K 2.5 KV inbuit surg protection minimum 110 lumens/watt, 50k burning hours Aluminium housing PDC , CRI -80 all as per specified and directed.

Supply and fixing LED lamp 7/9 watt, complete all as specified and as directed.

S&F in repair super bright LED (2X2), 36 W, 6500 K recess mounting minimum 120Lumens/watt IP20 ,IK02 PF>.9 and 4kv inbuilt surg protection CRI -80 with high efficent LED source all as per specified and directed by engineer in charge.

Supply and fixing in repair FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size complete standard fittings and fixtures including fixing on walls/roofs/ through MS downrod suspended type with fitting arrangement including neccessary elect connection from ceiling rose to luminaries with suitable size PVC cord complete all as directed.

Supply and fixing in repair Material glass led tube ,voltage range 220-240v-50hz ,wattage 18/20 W surge 2.5kv ,CRI 80 POWER FACTOR >_0.9 ,BURING HOURS 25K HOURS 110 L/W ,6500 K with high efficency, with neccessary electrical connection incl disconnection old elecronic ballast if any complete all as directed.

S & F in repairs integrated LED type Post top lantern with high power 25/30 W LED and IP 65 and IK 05 with 4 KV Surge protection as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution,spun auminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection all as directed

S&F in repair LED Building security light 20/25 Watt with high power LED source (>100 lumen/watt) PDC housing, IP66 and IK 07 with 4 KV inbuilt surge protection ,minimum 50000 burning hours hv cutoff@325/440 volt protection for 8 hours including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories , as specified and directed by Engr-in-charge.

S & F in replacement of GI pipe light grade, 32 mm bore, 1.20 mtr long bend in required shape, MS clamp 40x3mm thick duly painted with two coats of synthetic enemal paint fixed on wall including bolts and nuts complete all as specified and directed.

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 6 sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in replacement sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn into existing conduit complete all as specified and directed.NOTE:- One unit length shall measured as two run of main wire and one run of earth wire.

Supply and fixing in replacement for 1.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed.

Supply and fixing in replacement for 2.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed.

Supply and fixing in replacement for 4.0 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed.

S & F three core PVC insulated FRLSH sheathed cable with 1.5 sqmm stranded copper conductor complete all as specified and as directed.

S&F in replacement 1100V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection ,one twin core cable flat or circular strande 10 sqmm aluminiuam conductor complete all as specified and as directed.

S&F in replacement 1100V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection ,one twin core cable flat or circular strande 6.0 sqmm aluminiuam conductor complete all as specified and as directed.

S&F in repairs sheet metal enclosure for MCB DB double door type, TPN 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F in replacement MCB, single pole 10 to 32 Amp, 240 volts, 10 KA breaking capacity, 'B' curve complete all as specified and directed.

S&F MCB, in Replacement single pole & neutral 63 Amp, 240 volts, 10 KA breaking capacity, 'B' curve complete all as specified and directed.

S&F in replacement MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'B' curve complete all as specified and directed.

Supply and fixing modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F in repairs double door VTPN 4 way double door suitable for 4 pole MCCB 63-125A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties,earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed by Engr-in-charge. ( Note: MCCB & MCB to be measured and paid seprately)

S&F MCCB 63-100 Amps 415 volts, 4 pole 16 KA breaking capacity complete as directed.

S&F in replacement modular switches 1 way 6/10A,1 module, complete all as specified and as directed

S&F in replacement modular switches 1 way 16A,1 module, complete all as specified and as directed

S&F in replacement modular switches 2 way 6A,1 module, complete all as specified and as directed

S&F in replacement modular bell push,1 module, complete all as specified and as directed

S&F in replacement modular 6 A sockets-2/3 pin combine 2 module, complete all as specified and as directed

S&F in replacement modular 6A/16A sockets-2/3 pin combine 2 module,complete all as specified and as directed

S&F in replacement fan step regulator modular 100/120W, 2 module, complete all as specified and as directed

S&F in replacement modular white cover plate with frame ,2 module, complete all as specified and as directed

Same as item ser no 74 here in before but 3 module, complete all as specified and as directed

Same as item ser no 74 here in before but 4 module, complete all as specified and as directed

Same as item ser no 74 here in before but 6 module, complete all as specified and as directed.

Supply and fixing PVC casing and caping, 15mm wide complete all as specified and as directed

Supply and fixing PVC casing and caping, 20mm wide complete all as specified and as directed

S & F in replacement of switch piano flush button single pole one way 5/6 Amp 240 volt complete all as directed.

S&F switch piano flush button single pole two way 5 Amp 240 volt complete as directed.

S & F in replacement of switch piano flush button single pole one way 15/16 Amp 240 volt complete all as directed.

S&F in replacement of socket outlet flush type multipurpose 2 in 1, 3 pin 5/6 and 15/16 Amp, 230 volts complete as directed.

S&F in replacement of unservicable socket outlet flush type multipurpose 2 in 1, 6pin 5 .Amp, 230 volts complete as directed.

S&F in replacement of switch socket outlet combination flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed.

S&F in replacement bell push single pole one way 5 Amp, 240 volt fuesh type as directed.

S&F in replacement call bell AC single pole 240 volt ding dongType.

S&F in replacement high range up to 40 mtr, cordless call bell with wireless remote including batteries all as specified and directed.

S&F in replacement bell push (bed Switch) type single pole one way 5 Amp, 240 volt fuesh type as directed.

S&F in replacement angle/batten type holder insulated body with back plate suitable for batten fittings as directed.

S&F in replacement PVC gang box fitted with and including piano type switch 5 A and socket 5 A, 230 Volts complete with pvc gitties and screws all as specified and as directed.

S&F in replacement PVC gang box fitted with and including piano type switch 15 A and socket 15 A, 230 Volts complete with pvc gitties and screws all as specified and as directed.

S & F rectangular laminated hylum sheet top cover 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) for switch sockets of size' (125mmx125mmx3mm) complete all as specified and directed by Engr - in - charge.

Same as item 93 here in before but (200mmx125mmx3mm) complete all as specified and directed by Engr - in - charge.

Same as item 93 here in before but (225mmx275mmx3mm) complete all as specified and directed by Engr - in - charge.

M & L in replacement for pressed steel concealed terminal switch boxes not less than 1.6mm thick of 125x125x3mm (5x5)size factory made duly painted inside and outside with one coat red oxide primer, and making good disturbed surfaces of walls, floors,etc.complete all as sepcified and as directed.

M & L replacement for pressed steel concealed terminal switch boxes not less than 1.6mm thick of 200x 125x3mm (8x5)size factory made duly painted inside and outside with one coat red oxide primer, and making good disturbed surfaces of walls, floors,etc.complete all as sepcified and as directed.

M & L replacement for pressed steel concealed terminal switch boxes not less than 1.6mm thick of 225x175x3mm (10x7)size factory made duly painted inside and outside with one coat red oxide primer, and making good disturbed surfaces of walls, floors,etc.complete all as sepcified and as directed.

Supply and fixing Emergency bulb LED 12 watt lamp crystal white for battery backup up to 4 Hrs 6500K and bulb comes with overcharge & deep discharge protection with charge time 8-10 Hrs and min 4 Star rated with overcharging protection to protect battery incl Li-ion rechargeable battery, 230 volt, incl low energy consumption and non dimmable high beam bulbs for better light spread & beam with No visible Flickering and a Glare reduction Technology complete all as specified and as directed.

Supply and fixing Emergency bulb LED 14 watt lamp crystal white for battery backup up to 4 Hrs min 4 star rated 6500K and bulb comes with overcharge & deep discharge protection with charge time 8-10 Hrs with overcharging protection to protect battery incl Li-ion rechargeable battery, 230 volt, incl low energy consumption and non dimmable high beam bulbs for better light spread & beam with No visible Flickering and a Glare reduction Technology complete all as specified and as directed.

M & L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade, watering pipe 20 mm dia GI light grade, GI wire mesh, GI funnel, alternate layer of char coal and salt, PCC chamber, recessed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 2009 complete all as specified and directed .

Supply and fixing of Solar integral AIO streetlight with Single Piece high pressure die-cast (LM6 Alloy) Aluminium housing, reliable & robust construction with IP65 & IK08 protection, suitable for OD 50/60mm bracket, having Min 3000 system lumens, suitable for 24hrs (2 Nights) Autonomy. The luminaire should work on Hybrid mode with priority for solar, in case solar charging is not available then it should automatically switch to AC grid supply for reliable operation. Lithium Pherrophosphate Battery capacity min [email protected] or 256Wh & Battery Temp range -20-+60℃. Panel capacity min 60Wp, CRI >=70, System Efficacy >175lm/W, & system wattage should not be more than 18W ± 2%, if wattages increases then the size of battery & panel shall also be increased in similar percentage to maintain equal autonomy of the system.

The fixture should have designed for street light application & should have flexible angle of mounting from 0-15 Degree for divers geographical condition. Life class of LED System 50000hrs@L70. LED CE Certified, charger efficiency >90% and standards IEC62109-1, IEC61547, CISPR15, IEC62093, IEC61347-2-13, EN50530, IEC62384. The PV module should be made up of crystalline silicon solar cells "Mono-Crystalline" and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 & IEC 61730-1,2 IEC60598,Operating temp 0 Degree C to 50 Degree C, certifying above given parameters all reports shall be from In-house NABL or IECQ or any international accredited Laboratory, complete all as specified and directed.

rajan construction (BID ID -3212963)

Yadav Builders (BID ID -3214388)