Providing and fixing Powder coated MS grill and automatic sliding door at corridor in Ganga Hostel

Amount

Schedule-A

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing of aluminum colour powder coated (20 micron) ornamental grill for window using 50x50mmx6mm size opening fixed on aluminum frame with heavy duty aluminum U channel with all-round of grill and the rate including labour and material. (the rate of frame will be paid seperately) (Alumnium grill weight shall not be less than 2.95Kg/ Sq).

Supply, Installation, testing and comissioning of ES 200 Easy dormakaba Automatic Sliding door operator ES 200 Easy 4150mm, compliant with with European standards and produced according to the guidelines for power-operated windows, doors and gates, BGR 232, the UVV and the VDE regulations. TÜV design tested according to the low voltage guidelines of IEC /EN60335-2-103 and fulfils EN 16005 and DIN 18650-1 / DIN 18650-2 standards, The Profile Finish should be Silver Anodized E6/C0, with operator dimensions (H x D) : 100 x 180 mm and of length as required to suit the opening size given below. Dormakaba ES200 Easy Operators are with very sturdy design, Self balancing Panel suspension system and with Anti-Jump fitting. The track profile should be separate from the main profile for enabling reduction in vibration insulation, With Optional backplate for easy Installation. Microprocessor-controlled control unit, Self-learning, with adjustable parameters for opening and closing speed, hold-open time and opening and closing force, reversing when obstruction is encountered, with Torriadal Transformer, Program Switch with nob, ES 200 Easy, Max Panel Weight Carrying Capacity of 2 X 100 Kgs. FINISH: 'Silver Anodised, Product with ST FLEX Profiles for Glass thickness 8-22mm. Five Position Program Switch with knob, Cable for Program Switch, BR Soft Nose Seal 8 mm - 10 mm - 1 No - 2500 mm, ST-Flex Profile System for 8 - 22 mm Thick Glass Average Size of door : 2100mm (H) X 1800mm (W) X13.5mm thick Laminated Toughened glass supply.

Supply, Installation, testing and comissioning of ES 200 Easy dormakaba Automatic Sliding door operator ES 200 Easy 4150mm, compliant with with European standards and produced according to the guidelines for power-operated windows, doors and gates, BGR 232, the UVV and the VDE regulations. TÜV design tested according to the low voltage guidelines of IEC /EN60335-2-103 and fulfils EN 16005 and DIN 18650-1 / DIN 18650-2 standards, The Profile Finish should be Silver Anodized E6/C0, with operator dimensions (H x D) : 100 x 180 mm and of length as required to suit the opening size given below. Dormakaba ES200 Easy Operators are with very sturdy design, Self balancing Panel suspension system and with Anti-Jump fitting. The track profile should be separate from the main profile for enabling reduction in vibration insulation, With Optional backplate for easy Installation. Microprocessor-controlled control unit, Self-learning, with adjustable parameters for opening and closing speed, hold-open time and opening and closing force, reversing when obstruction is encountered, with Torriadal Transformer, Program Switch with nob, ES 200 Easy, Max Panel Weight Carrying Capacity of 2 X 100 Kgs. FINISH: 'Silver Anodised, Product with ST FLEX Profiles for Glass thickness 8-22mm. Five Position Program Switch with knob, Cable for Program Switch, BR Soft Nose Seal 8 mm - 10 mm - 1 No - 2500 mm, ST-Flex Profile System for 8 - 22 mm Thick Glass Average size of Door : 2100mm (H) X 1200mm (W) X13.5mm thick Laminated Toughened glass supply.

Supply, Installation, testing and comissioning of dormakaba ED 100 automatic swing door operator in Contour design suitable for double door leaf for transom fixing on the pull or push side. It should be suitable to handle maximum door leaf weight up to160kg. It shuld comply with with European standards and produced according to the guidelines for power-operated windows, doors and gates, BGR 232, the UVV and the VDE regulations and TÜV design tested according to the low voltage guidelines of IEC /EN 60335-2-103 and fulfils EN 16005 and DIN 18650-1 / DIN 18650-2 standards. Rate quoted shall include Integrated ESM Energy Saving Mode for IRS safety sensors, basic Cover for operator, ED Slide Channel Set, Active Infrared Safety Sensor 700 mm. The door opening size shall be : 2100mm X 1800mm Door shall be provided with 13.5mm Laminated Toughened glass for double leaf door.

Supply, Installation, testing and comissioning of ALT 100 SG Glazed Door (Double Leaf) for Glass infill of Laminated glass with Alterra rebate door frame System all around the door. Aluminium Stile to be formed out of 70x35mm Horizontal and Vertical Door Profile frame with clips & seals. Door Hardware Door Drop down seal Suitable for Glass thickness of 13.52mm shall be provided. The Profile shall be Black matt finished with necessary clips, seals and fixing accessories for the system. Alexa 100 SG - Door Rebate profile, 3mtr Stock length Alu Ev1 Finish, Alexa 100 - DR Clip wooden door, 3mtr Stock length Alu Ev1 Finish, ALEXA wooden door seal , Fixed frame cleat 50x50x3mm, CSK Screw M5 x 10mm, Alexa 100 - Stile door Profile, 3mtr Stock length Alu Ev1 Finish, Alexa 100-Stile door Clip, 3mtr Stock length Alu Ev1 Finish, MR28 1mm Adj Gasket for 13.52mm glass(thick) , MR 28 Fixed Gasket 13.52mm Glass(thick) , Wooden Block 1000mm stock length(L1000mm W41mmxT17mm), Stile connector - 2, CSK Screw M6 x 12mm, MR28 2mm Adj Gasket for 13.52mm glass(thick), MR 28 Fixed Gasket 13.52mm Glass(thick) , Flush hinge 5” length, 78mm width, 3mm thickness, knuckle 14 SSS finish. All Profiles to be with 1.5 mm Gauge thickness including 20 Micron of Anodizing. Max System Height - 3000mm

Supply, Installation, testing and comissioning of surface-mounted EM 1800 AH - Single electromagnetic lock with up to 1,800 N holding force, with lock status sensor (LSS). It shall have anodised aluminium sensor as detailed below . Magnet: 166 x 39 x 21 mm, Armature plate: 133 x 31 x 8 mm. The rate quoted shall include the cost of necessary cables, conduits for wiring and integration with the access control system, integration with sensors, push buttons etc.

Providing and fixing Nemo D – Safety Radar of dormakaba make at wall and door frames as per the requirement at site and integrating it with door control system

Dismantling doors, windows & clerestory windows shutter including chowkhats, of area beyond 3 sqm

Dismantling granite / tile work in floors and roofs laid in cement mortar including stacking material within 50m lead For thickness of tile 10mm to 40mm. Rate quoted shall include cutting the granite/ tiles for required shape before dismantelling

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead

Demolishing Brickwork including stacking of serviceable material and disposal of unserviceable material within 50m lead in cement mortar

15mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 Cement : 4 Coarse sand / M Sand)

Brick work with Fly ash concrete blocks of class designation M100 upto floor V level in Cement mortar 1:6 (1 Cement : 6 coarse sand / M Sand)

Schedule-B

AMC charges towards monthly maintenance of automatic sliding door at ganga hostel as per the terms and conditions mentioned in Annexure-I

ALIYAN CONSTRUCTION CO

ESVEE CONSTRUCTIONS

DJ GROUP

M/S. NAVEEN CONSTRUCTIONS

CREATORS ENGINEERS AND INTERIORS PVT LTD