REPAIR/ MAINT OF DG SET, SECURITY LIGHTS, GARDEN LIGHTS, BUILDING LIGHTS ETC AT MIL STN SHAHJAHANPUR UNDER GE (EAST) BAREILLY

Amount

Taking down/repair of the defective security / street light fittings from wall / pole mounted of following type and refixing the same in its position after replacement of unserviceable spare parts such as choke, capacitor, igniter, holder, lamp connector etc :- (i) Old materials obtained under relevent items will be property of contractor as per sch of credit after regularisation of credit amount through the first payment. (ii) Unit rate shall be deemed to be inclusive of provision of ladder arrangement in order to carryout the job at fittings on fixed position. (iii) Supply only spares will be measured and paid for separately under relevent items.

Iginitor suitable for 70-400 w HPSV/MH Lamps complete all as specified and directed.

Porcelain lamp holder for HPSV, HPMV 250 / 150 watt complete all as specified and directed.

Porcelain lamp holder for HPSV/HPMV 125/80/70 watt complete all as specified and directed.

Porcelain connector for HPSV/HPMV fitting of any type complete all as specified and directed.

Chock for T-5, 2X24 Watt fitting complete all as specified and directed.

Tube rod for T-5, 1X24 Watt fitting complete all as specified and directed.

Copper Chock for HPSV/HPMV 250-400 W complete all as specified and directed.

Copper Chock for HPSV/HPMV 150W complete all as specified and directed.

MH/SV Lamp Single Ended 250 Watts complete all as specified and directed.

MH/SV Lamp Single Ended 150 Watts complete all as specified and directed.

S&F in replacement garden light, fitting, Supply and fixing ( new BAMBOO - IP65) New generation, energy saving, environmental friendly, long life aesthetically designed die-cast aluminium landscape luminaire for downward lighting with high power LED as light source.including making connection complete all as specified and directed.

S&F in replacement post top lantern type light fitting (RUBY (CLEAR) - IP65 ) New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source.including making connection complete all as specified and directed.

S&F in replacement 15 W Solar LED, 5 M TUB Pole Standalone Street Light Range - (3 Days Backup) For Panel,Battery, Pole and SCC specification pls. contact branch office or refer Catalogue Solar Standalone Street Light system mentioned below includes LED street Light with in-built SCC, SPV Panel, Battery, HDG Tubular Pole,including excavation and pcc work complete all as specified and directed.

S&F in replacement 9 W to 15 W Solar LED Street Light complete all as specified and directed.

S&F in replacement 9 W to 15 W LED Solar Street Light Pane Board complete all as specified and directed.

S&F in replacement 60 W to 90 W LED Street Light Soler Panel Plate complete all as specified and directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth and getting out in soft/loose or any other type of soil for taking up or laying of cable complete all as specified and directed.

All as per item No 8 above but hard surfaces such as in road cutting/ hard standing etc including making good disturbed surfaces to match with original complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above starting point complete all as specified and directed.

Supply and laying new dry river sand laid in trenches 8cm below the cable and 15cm above the cable and punned to 18cm as cable cushioning and covering complete all as specified and directed. Note:- Punned quntity will be measured paid at this item.

Supply and laying of brick well burnt locally available sub class 'B' laid over sand cushioning for cable protection in trenches width of brick perpendicullar to the length of cable including taking up of old unserviceable bricks complete all as specified and directed.

S&F in replacement steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0metres long) complete all as specified and directed.

S&F pin type insulator procelain, vitreous white, brown or green including galvanised mild steel spindle, two nos galvanised iron washer and one galvanised iron nut 100mm height, 65mm dia for 1100 volts grade complete including taking up of old unserviceable pin type insulator complete all as specified and directed.

S&Fof cross arms, bracings, supports, clamps, back plate fabricated from structural steel sections such as channels, angles, flat iron including 16mm dia bolts, nuts, washers, welding, bending, cold or hot drilling holes for bolts/insulators in any shape and size as directed and including preparation of steel surface and applying two coats of aluminium paint over a coat of red oxide zinc chrome primer including dismantling of old unserviceable cross arms complete all as specified and directed.

S&F ACSR conductor for LT/HT OH line aluminium conductor steel reinforced size as per existing including dismantling of old unserviceable ACSR conductor complete all as specified and directed.

S&F of on overhead lines galvanized steel wire 3.15mm or 4mm dia including dismantling of old unserviceable wire complete all as specified and directed.

M&L for guarding cradles, hexagonal rectangular, fabricated with galvanised steel wire 3.15mm or 4mm dia including taking up of old unserviceable steel wire complete all as specified and directed.

M&L in replacement for Earthing complete with galvanised steel earth plate electrode of size 600x600x6mm thick burried in a pit to a depth of 2.25mtrs below ground level with top edge of earth plate at a depth of not less than 1.50 meters below ground level, earth plate packed on all sides with charcol dust mixed with salt to a thickness of 15cm,.Connected with earthing lead of 32mmx6mm strip galvanised iron, watering pipe 20mm dia light grade and water filling funnel and mess complete all as shown in plate No 4 of MES schedule part II to the earthing test point, Including PCC work complete all as specified and directed. (Note :- Earthing lead beyond test point shall be measured separately)

S&F of earthing strip GI 32x6 mm from earth test point to Electrical equipment including taking up of old unserviceable earthing strip complete all as specified and directed.

M&L in replacement of Earthing complete with GI earth plate 60x60cmx6mm thick electrode and 4mm dia GI wire as earthing lead burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to GI wire earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh,protection pipe 15 mm dia light grade , charcoal dust and salt etc and connected to earthing test point complete all as specified and directed.

Supply and Laying, jointing, testing and commissioning or fixing of cable in wall or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty ) with aluminium conductor, 1100 volts, grade of cross sectional area as under including taking up of old unserviceable XLPE cable complete all as specified and directed. 16 sqmm 4.0 core

All as per item No 33 but size of cable 25 sqmm 3.5 core

All as per item No 33 but size of cable 35 sqmm 3.5 core

All as per item No 33 but size of cable 70 sqmm 3.5 core

All as per item No 33 but size of cable 10 sqmm 4.0 core

S&F of GI tubing light grade 50mm nominal bore for cable protection fixed with clamps of M.S. Flat iron 25x3mm, GI nuts, bolts and washers to poles/under floor/under roads/alongwith walls including two coats of aluminium paint over a coat of red oxide primer on clamps complete including taking up of old unserviceable GI tubing complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20mm stone aggregate for coping of pole complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm stone aggregate for stay assembly complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40mm stone aggregate for pole foundation complete all as specified and directed.

S&F in replacement of unserviceable security light luminaire LED 1x60 watts with deep drawn housing including all accessories and LED lamp 60 watts with suitable 25 mm dia GI bracket 0.60 mtr length fixed on wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as specified and directed.

S&F in replacement MCCB, 4 Pole, 160 Amps, 415 Volt, 35 kA including connecting up using suitable size of lugs complete all as specified and directed.

S&F in replacement MCCB, 4 Pole, 200 Amps, 415 Volt, 35 kA including connecting up using suitable size of lugs complete all as specified and directed.

Trimming of trees all as along the LT line in such a way that there is clear distance of 3 meter between tree and electric line. The work will be executed to the entire satisfaction of Engr-In-Charge irrespective of the size of the tree branches etc complete all as specified and as directed. Note : (i) Tree branches etc will be left as itias the wood belongs to Cantt board/DEO and they will be responsible for the wood. (ii) Contractor will employ sufficient labour to complete the full one job with in about 15 days. (iii) Contractor will responsible for any type of accident while trimming the trees. (iv) Contractor supervisor will take proper shut down from MES installation before starting the work and clear it before resuming power supply, however full assistance will be provided by MES staff.

S&F of stay assembly complete for LT over head line comprising of 7/4.00mm (7/8 SWG) galvanised M S Stranded wire of required length fixed to poles with and including flat iron, clamps, fabricated out of 50x6mm flat iron, bolts, nuts and washers, GI stay bow 19mm dia 400mm long with threading ends, GI nuts and wahsers, M S stay plate galvanised 305x305x6mm thick,stay rod 20mm dia, two numbers thimbles including taking out old unserviceable stay assembly complete all as specified and directed. Note : Earth work and PCC measured and paid at approprite item.

S&F in replacement aluminium wire with Two core 2.5 sqmm PVC insulated 1100 volts grade connected from DB to DB/main board complete all as specified and directed.

S&F in replacement GI pipe 25 mm 1.5 Mtr ling dia GI bracket 0.60 mtr length fixed on Building wall with 50x6 mm flat iron, clamps, nuts and bolts complete all as specified and directed.

S & F in replacement GI pipe 25 mm 1.5 Mtr ling dia GI bracket 0.60 mtr length fixed Pole with 50x6 mm flat iron to shape including 02 Nos MS clamps, Nut bolts, washers etc complete all as specified and directed.

M&L for painting of steel tublar pole 9 Mtr long, LT any type vertical complete with cross arms with one coat of aluminium paint after preparation on of surfaces of pole/cross arms including painting of black & yellow strip of 30cm upto 1.5Mtr above coping and marking of MES No and complete all as specified and directed.

S&F of DB for street light made out of CRC sheet, dust and vermin proof out door type duly painted of size 200 mm x 200 mm x 15 mm with arrangement of incoming and outgoing feeder with bus bar of suitable capacity for termination of line with single MCB SP, 230 V, 0.5 Amp 10 KA ( In accordance wth IS/IEC 60898-1) and arrangement for fixing cooper wire of size 2 x 1.5 Sqmm with 1 x 1.0 Sqmm earth wire in green color of FR PVC insulated copper conductor,from DB to light fitting complete including taking up of old unserviceable DB complete all as specified and directed.

M&L, install LT Panel Outdoor cubicle type factory made out of CRCA Sheet of 3.15 mm thick vermin proof duly painted with 2 coat of synthetic enamelled paint and MS angle frame work with 40x40x5mm and including making connection aluminium lugs consisting of following assessories complete :- (a) Aluminium Bus bar four wire system 415 volt with heat shrinkable insulator sleeve suitable for 200 A for phases and for neutral .(b) INCOMING MCCB 4 pole with thermal magnatic release of rating 160 Amps 35 KA-01 No (c) Out going MCCB 4 Pole 125 Amps 4 pole -01 Nos(d) PCC 1:2:4 for grouting of panel

Maintenance/ servicing of different capacity of DG sets by carrying out 'B' check as per manfacturers maintenance chart : (Note:Engine Oil shall be measured and paid seperately under respective item.)

DG set 12.5 KVA, Engine

DG set 30 KVA , Engine

DG set 40 KVA, Engine.

DG set 50 KVA, Engine.

DG set 63 KVA, Engine.

Repair to PT pump & injector of 12.5 to 63 KVA DG Set by taking out carefully and refixing after caliberation at manufacturer dealer including replacement of u/s worn out parts. (Note: unserviceable parts shall be measured and paid seperately herein after) following parts for serial item above here in before

Gasket set

Screen filter

Cap filter

Barrel and sleeve

Plunger

Main shaft

Techno Shaft

Bush techno shaft

Bushing

Bearing

Gear pump

M&L for taking out radiator assy from existing DG of cap 63 KVA and repair to radiator tank, cleaning complete radiator with anti corrosion chemical, rewelding/ soldering for tubes / tank and refixing complete including replacement of hose pipe set with clamp connected to upper and lower tank for making complete water leak of radiator complete all as specified and directed. 63 KVA DG Set

40 to 30 KVA DG Set

12.5 KVA DG Set

Repair to oil cooler of capacity 63 KVA DG Set Cummins/ Kirloskar diesel engine water cooled with following parts:- (a) Element tube oil cooler- 02 Nos (b) O' ring-02 Nos (c.) Retainer O' ring-02 Nos (d) Gasket-01 Set (e) Hose-01 set (f) Clamp hose-02 Nos

M&L for taking out FIP from DG Set of capacity 63 KVA and replace the following items (a) Injector nozzles-06 Nos (b) Deliverly valve-06 No (c) Bearing-02 Nos (d) Bearing bush-02 Nos (e) Niddle valve-06 Nos & proper calibeation and testing complete and refixing to the DG sets as directed.

Repair with the replacement of following wornout parts of alternator 24 Volts:- (a) replacement of rotor -01 Nos (b) replacement of diode plate-01 Nos (c) rewinding of field winding-01 each (d) replacement of bearing-01 each (e) Replacement of regulator-01 each

Supply and replacement of water circulating pump/ water body suitable for 30 KVA to 40 KVA capacity DG Sets of following Item . (a) Injector nozzles-06 Nos (b) Deliverly valve-06 No (c) Bearing-02 Nos (d) Bearing bush-02 Nos (e) Niddle valve-06 Nos & proper calibeation and testing complete and refixing to the DG sets as directed.

Supply and replacement of water circulating pump/ water body suitable for 50 KVA to 63 KVA capacity DG Sets of following Item (a) Injector nozzles-06 Nos (b) Deliverly valve-06 No (c) Bearing-02 Nos (d) Bearing bush-02 Nos (e) Niddle valve-06 Nos & proper calibeation and testing complete and refixing to the DG sets as directed.

Supply and replacement of water circulating pump/ water body suitable for 12.5 KVA to 63 KVA capacity DG Sets of following Item size of grooved belt

S&F diesel fuel inlet/ oulet, breaded flexible pipe of 20 mm dia. With clamps clips for DG Set any capacity complete all as specified and directed.

Dismantling the non functional turbo charger for 63 KVA DG set 1500 rpm, Make- Kirloskar/ Cummins from engine and replacing with new turbo assy complete Make- Kirloskar assembling , testing and commissioning at site complete all as specified and directed.

Dismantling the non functional turbo charger for 40 KVA DG set 1500 rpm, Make- Kirloskar/ Cummins from engine and replacing with new turbo assy complete Make- Kirloskar assembling , testing and commissioning at site complete all as specified and directed.

Dismantling the non functional turbo charger for 30 KVA DG set 1500 rpm, Make- Kirloskar/ Cummins from engine and replacing with new turbo assy complete Make- Kirloskar assembling , testing and commissioning at site complete all as specified and directed.

S&F in replacement of Auto Voltage Regulator complete with wire connection and connected to existing field coil, 24 Volt, DC for cap of DG set 30/40 KVA Make- Kirloskar/ Cummins complete all as specified and directed.

S&F in replacement of Auto Voltage Regulator complete with wire connection and connected to existing field coil, 24 Volt, DC for cap of DG set 63 KVA Make- Kirloskar complete all as specified and directed.

S&F in replacement of alternator 24 Volt (for charging of battery) for 30 to 63 KVA DG Set Make- Lucas complete all as specified and directed.

Taking down the unserviceable self starter and repairs with rewinding to self starter of capacity 12/ 24 Volt by taking out old burnt out copper winding wire with super enamelled copper wire same gauge including replacement of u/s pinion, bush, solenoid coil, carbon brushes & tension spring complete and the DG Sets and testing consider complete all as specified and directed.

M&L for replacement of air filter of DG set of capacity 12.5 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement of air filter of DG set of capacity 30 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement of air filter of DG set of capacity 40 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement of air filter of DG set of capacity 50 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement of air filter of DG set of capacity 63 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement bye pass filter of DG set of capacity 12.5 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement bye pass filter of DG set of capacity 30 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement bye pass filter of DG set of capacity 40 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement bye pass filter of DG set of capacity 50 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement bye pass filter of DG set of capacity 63 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement filling the Engine Oil DG set complete all as specified and directed.

M&L for replacement of fuel filter of DG set of capacity 12.5 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement of fuel filter of DG set of capacity 30 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement of fuel filter of DG set of capacity 40 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement of fuel filter of DG set of capacity 63 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement of Lube oil filter of DG set of capacity 12.5KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement of Lube oil filter of DG set of capacity 30 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement of Lube oil filter of DG set of capacity 40 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement of Lube oil filter of DG set of capacity 50 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement of Lube oil filter of DG set of capacity 63 KVA Make- Kirloskar/ Cummin complete all as specified and directed.

S&F in replacement changer over switch 200 Amp to be fixed to channel and as required to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and directed.

S&F of lead acid battery, 180 AH, industrial heavy duty, 25/ 27 plates after disconnecting connection and taking down old unserviceable complete all as specified and directed.

Supply and replacement of solenoid coil, 12/ 24 Volts , DC operated with lead and fixing clamps complete all as specified and directed.

M&L for replacement of hose pipe set (water/ oil) complete with clamp and other fitting as required at site for 63 KVA DG Set Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement of hose pipe set (water/ oil) complete with clamp and other fitting as required at site for 40 KVA DG Set Make- Kirloskar/ Cummin complete all as specified and directed.

M&L for replacement of hose pipe set (water/ oil) complete with clamp and other fitting as required at site for 12.5 to 30 KVA DG Set Make- Kirloskar/ Cummin complete all as specified and directed.

Supply and filling coolant for DG set as per DG set manufacturers complete all as specified and directed.

M&L for renewal of battery terminal heavy duty made out of brass suitable for 12 V lead acid battery complete all as specified and directed.

M&L for battery lead made up of copper conductor wire of 23/.016 of any length as required at site for various D G Sets complete all as specified and directed.

Supply & filling distilled water in batteries as required at various DG set installations complete all as specified and directed.

Painting to DG set canopy with spray paint of size 12.5 to 63 KVA after cleaning, srapping and making the surfaces free from rust of main externally and painting with two coats synthetic enamelled paint in black/ blue/ red including marking/ writing on pipe complete all as specified and directed.

Note : Tenderers may note that amount of credit Rs 1,11,230.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/S CHAUHAN ELECTRIC WORKS

ANNAPURNA ENTERPRISES

H.B. Traders