Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.9 LAccepted-AOC D 154 ADARSH NAGAR NARMADA ROAD JABALPUR 482001 M P | JABALPUR | MADHYA PRADESH | 482001 | ₹15.9 L | L1 | Accepted-AOC Lowest Bidder |
| 2 | L2₹16.6 L+₹70,591.50 (4.43%)Rejected-Finance PLOT NO 79 SIS PARK DICHAON ENCLAVE PP2914 NAJAFGARH SOUTH WEST DELHI NEW DELHI 110043 | WEST DELHI | DELHI | 110043 | ₹16.6 L+₹70,591.50 (4.43%) | L2 | Rejected-Finance Not Being L1 |
| 3 | L3₹19.9 L+₹4.0 L (25.1%)Rejected-Finance | ₹19.9 L+₹4.0 L (25.1%) | L3 | Rejected-Finance Not Being L1 |
| 4 | L4₹21.1 L+₹5.1 L (32.3%)Rejected-Finance | ₹21.1 L+₹5.1 L (32.3%) | L4 | Rejected-Finance Not Being L1 |
| Sl No | Description | Qty | Unit | M/S.M.S.Devi.Const.Co L3 | R.P Builders L4 | BALRAM SETHI L2 | RADHEY CONSTRUCTION L1 |
|---|---|---|---|---|---|---|---|
| 1.00Note: (i) The contractor or his authorized representative shall report daily to the Complaint Cell for collection of complaints and The contractor shall be required to attend complaints as and when intimated by the department through complaint slip , VYNUS , telephone or any otherauthorised means of communication .If it is not possible to rectify the same within timeline specified below, the matter along with detailed reasons shall immediately be brought to the notice of the Engineer-in-Charge by the contractor or his representative. If the Engineer-in-Charge is satisfied with the justification furnished, no recovery shall be effected on this account. (ii) (a) All No Light / Power Supply complaints shall be attended to and rectified within 01 hour, commencing from the date and time of issue/intimation of the complaint. Failure to attend the complaint within the stipulated period shall attract a penalty of Rs. 120/- for delay up to 04 hours and Rs. 240/- for delay beyond 04 hours, which shall be recovered from the contractor's dues. (b) All other routine maintenance complaints covered under the contract shall be attended to and rectified within 24 hours, commencing from the date and time of issue/intimation of the complaint. In case the complaint is not rectified within the stipulated period, a penalty of Rs. 120/- per complaint per day or part thereof shall be recovered from the contractor's dues.. However, labour charges for items covered under “M&L”, “S&F”, and “In Repair” shall be deemed to be included in the respective quoted rates. (iii) Items under this contract are of day-to-day nature and the complete scope/site cannot be forecast or handed over to the contractor at one time. The contractor shall therefore arrange adequate manpower, materials, and resources as per site requirements. In case the contractor fails to provide the required skilled labour in accordance with the contract provisions, suitable recoveries/penalties shall be levied as applicable. | |||||||
| 1.01(iv) In addition to the above, the contractor shall arrange and maintain all necessary T&P required for execution of the work, such as multimeter , necessary electrical tools bag, tape roll , washers and screws of all sizes, , drilling machine with bits, and the like, including necessary safety measures, complete all as specified and directed by the Engineer-in-Charge. (v) The cost of all the above arrangements, obligations, T&P, consumables, labour, safety measures, and incidental requirements shall be deemed to be included in the quoted rates of the respective items and no extra payment whatsoever shall be admissible on this account. | |||||||
| 2.00 | S&F in repair PVC connections 450 mm long with brass unions at both ends suitable for 15 mm bore pipe, complete all as specified and as directed. | 80 | Each | 80 ₹6,400 | 90 ₹7,200 | 60 ₹4,800 | 50 ₹4,000 Lowest |
| 3.00 | S&F in repair waste fittings, 32/40 mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed. | 40 | Each | 50 ₹2,000 Lowest | 80 ₹3,200 | 90 ₹3,600 | 60 ₹2,400 |
| 4.00 | S&F in repair PVC waste pipe 32/40 For WHB and sink, complete all as specified and as directed. | 50 | Each | 50 ₹2,500 | 80 ₹4,000 | 20 ₹1,000 Lowest | 50 ₹2,500 |
| 5.00 | S & F in repair chromium plated Stop valve/angle valves cast copper alloy, screwed down both, high pressure, with crutch or butterfly handle, screwed both end fixed, complete all as specified and as directed. | 35 | Each | 550 ₹19,250 | 350 ₹12,250 | 250 ₹8,750 Lowest | 260 ₹9,100 |
| 6.00 | S&F in repair bib tap brass chromium plated fancy type, long body with flange screwed down, screwed for iron pipe 15 mm bore, complete all as specified and as directed. | 40 | Each | 550 ₹22,000 | 425 ₹17,000 | 280 ₹11,200 | 260 ₹10,400 Lowest |
| 7.00 | S&F in repair 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed, complete all as specified and as directed. | 10 | Each | 550 ₹5,500 | 600 ₹6,000 | 340 ₹3,400 | 280 ₹2,800 Lowest |
| 8.00 | S&F in repair mixing valve 15 mm dia, CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin, including fittings, complete all as specified and as directed. | 4 | Each | 3,000 ₹12,000 | 1,850 ₹7,400 | 3,400 ₹13,600 | 1,200 ₹4,800 Lowest |
| 9.00 | S&F in repair grating with 100 mm dia of PTMT approved make including fixing with 1:4 cement mortar to floor/ nahni trap etc., complete all as specified and as directed. | 20 | Each | 50 ₹1,000 | 50 ₹1,000 | 30 ₹600 | 20 ₹400 Lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
5 Aug 2026, 6:00 pmClosed
GE South Delhi Cantt-10
GE South Delhi Cantt-10
COMPREHENSIVE REPAIR AND MAINT, PERIODICAL SERVICES INCL DAY TO DAY B/R WKS, REPAIRS/REPLACEMENT OF JOINERY ITEMS, FLOORING, WALLS, PLUMBING SYSTEM, SANITARY ITEMS, TILING AND OTHER LEAKAGE, SEEPAGE WKS FOR OTM ACCN AT CAMS UNDER AGE B/R -I
2026_MES_777173_1
GE/TOKEN-26/2026-27
Open Tender
Civil Works
Item Rate
180 days
GE South Delhi Cantt
As per Tender Documents
11 documents required · 11 mandatory
₹500
GE South Delhi Cantt
₹60,000
Yes
15 Sept 2026
8 Jul 2026
7 Aug 2026
8 Jul 2026
5 Aug 2026
22 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | (iv) In addition to the above, the contractor shall arrange and maintain all necessary T&P required for execution of the work, such as multimeter , necessary electrical tools bag, tape roll , washers and screws of all sizes, , drilling machine with bits, and the like, including necessary safety measures, complete all as specified and directed by the Engineer-in-Charge.
(v) The cost of all the above arrangements, obligations, T&P, consumables, labour, safety measures, and incidental requirements shall be deemed to be included in the quoted rates of the respective items and no extra payment whatsoever shall be admissible on this account. | - | - | - | - |
| 2 | S&F in repair PVC connections 450 mm long with brass unions at both ends suitable for 15 mm bore pipe, complete all as specified and as directed. | 80 | Each | - | - |
| 3 | S&F in repair waste fittings, 32/40 mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed. | 40 | Each | - | - |
| 4 | S&F in repair PVC waste pipe 32/40 For WHB and sink, complete all as specified and as directed. | 50 | Each | - | - |
| 5 | S & F in repair chromium plated Stop valve/angle valves cast copper alloy, screwed down both, high pressure, with crutch or butterfly handle, screwed both end fixed, complete all as specified and as directed. | 35 | Each | - | - |
| 6 | S&F in repair bib tap brass chromium plated fancy type, long body with flange screwed down, screwed for iron pipe 15 mm bore, complete all as specified and as directed. | 40 | Each | - | - |
| 7 | S&F in repair 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed, complete all as specified and as directed. | 10 | Each | - | - |
| 8 | S&F in repair mixing valve 15 mm dia, CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin, including fittings, complete all as specified and as directed. | 4 | Each | - | - |
| 9 | S&F in repair grating with 100 mm dia of PTMT approved make including fixing with 1:4 cement mortar to floor/ nahni trap etc., complete all as specified and as directed. | 20 | Each | - | - |
| 10 | S&F in repair grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms) etc., complete all as specified and as directed. | 30 | Each | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.73 MB
BOQ_870385.xls
BOQ • 0.41 MB
SchofCreditT26.pdf
Additional Documents • 0.37 MB
TenderdocumentsT26.pdf
Tender Documents • 1.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .