REPAIRS TO HARD STANDING, FOOTPATH, INTERLOCKING TILES, BOUNDARY WALL, SECURITY WALL, FENCING, STEEL GRILL/GRATING AND OTHER CERTAIN B/R WORKS AT AFS AMLA

Amount

Demolition of cement concrete as in ground floor and paving not exc 15 cm thickness below or above GL ( unreinforced concrete ) complete all as specified and directed.

M&L PCC 1:4:8 type D2(using 40mm graded stone aggregate) as in sub base 75mm thick, complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 Type B-1 (20mm graded aggregate ), as in top layer, finished fair and even complete all as specified and directed.

M&L Forming 12mm thick expension joint filled with preformed bituminous filler board and top 30mm primed and sealed with sealing compound grade 'A' complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry or laid dry and pointed complete all as specified and directed.

M & L 60mm thick factory made chamfered edge cement Concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for glossy finished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigment in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified and directed.

M&L Fly ash brick 75 kg/cmsq compressive strength old size , is straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed.

Ditto as per item No. 09 but except bricks. Note : All type bricks retrieved from item No. 08 will be used complete all as specified and directed.

Taking down cement plaster in any description including raking out joints, hacking for key scrubbing down with water complete all as specified and directed.

M & L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick work or stone masonry surfaces fair and even complete all as specified and directed.

M&L for preparing new surfaces of walls and applying two coat of cement base paint over a coat of primer including use of scaffoldings complete all as specified and directed.

Dismantling fencing wire mesh,any type chain link fencing/welded mesh complete all as specified and directed.

Supply only Chain link MS galvanised fencing, size 4" x 4" and dia of wire 4mm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire, tightening complete all as specified and directed.

M&L mild steel round bar 10mm dia cut to length bent to shape required including cranking bending spirally for hooping and for straining chain link fencing complete all as specified and directed.

S & F mild steel screw bolts (machine made) 11mm to 15 mm dia with hexagonal or square heads at one end and screwed the other,or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but n exc 10cm long complete all as specified and directed.

Dismantling post or struts (wood,steel,or R.C.C) any section,incl.taking out embedded portion and making good distrubed ground complete all as specified and directed.

S&F mild steel Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Excavation in soft/loose soil for post holes (or similar holes) n.exc 0.5Cum getting out, removing surplus soil to a distance nexc 50m and making good surface in soft/loose soil complete all as specified and directed.

Demolition of cement concrete un reinforced of any description & any position and disposing of the rubbish materials out of defense land complete all as specified and directed.

M&L for PCC 1:3:6 type C-1, using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerb stone not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not oterwise provided for complete all as specified and directed.

S&F framed work such as grill, grating , etc, with end of bars shouldered and/or riveted, or forget in to spikes, framed guard bars, flat iron, angel, barred iron doors, ladder, framed balusters, walk ways, railings, framework of water tanks and and similer work Gde- Fe-410-0 or Fe-310-0 complete all as specified and directed.

Fixing only framed work such as grills, gratings, etc., ladders; framed balusters; walk ways; railings; framework of water tanks and similar works con-forming to Fe 280. Gde-E-165 complete all as specified and directed.

S&F for mild steel work in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for running welding of thickness n'exc 6mm in repairs complete all as specified and directed.

M&L for welding of thickness n'exc 6mm and length exc 2.5cm and n'exc 5cm in repairs complete all as specified and directed.

S&F galvanised 2 standred,steel barbed wire 2.24mm dia barbed with 2mm dia baebs at 75mm spacing and straning and fixing to any type of standred rails straining bolt, incl. securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. as in repairs complete all as specified and directed.

Restraining, resecuring including making good staples etc of galvanised 2 standred, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straning and fixing to any type of standred rails straining bolt, incl. securing or tying at crossing with and provition of galvanised mild steel wire, staples or steel pins, etc. complete all as sepcified and directed.

M&L for preparation of untreated new surfaces of steel and iron work exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

S & F galvanised concertina coil fencing with punched tape concertina coil 600 mm dia having 50 Nos round per 6m length,spring core wire (2.5mm thick) and fixing the same with GI staple and GI clips to retains horizontal including bolts,spikes complete all as specified and directed. Note- Measurement will e taken as effective length of fencing and not length of coil.

S & F galvanised concertina coil fencing with punched tape concertina coil 1000 mm dia having 50 Nos round per 6m length,spring core wire (2.5mm thick) and fixing the same with GI staple and GI clips to retains horizontal including bolts,spikes complete all as specified and directed. Note- Measurement will e taken as effective length of fencing and not length of coil.

M&L for 12mm thick cement fibre premium board (suitable to exterior environment) fix with proper joint and suitable screw, complete all as per manufacturer instruction and applying two coat of acrylic emulsion paint over the primer coat of exterior surface of approved colour and pattern with preparation of surfaces complete all as specified and directed. Make: Vishaka or equal Note : Cost of cutting and pattern /desgin over cement board deemed to be included in qouted rate.

Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

GWALIOR TRADE LINK (BID ID -3205357)

Captainkomalchaharconstructions (BID ID -3204974)

VIJ ASSOCIATES (BID ID -3205373)

M/s Vinod Yadav (BID ID -3200041)