REPAIRS TO FLOORING, SHED AND PROVISION OF SHED ADJACENT TO OFFICE BUILDING OF BOILER HOUSE AT HEF KIRKEE

Amount

Demolition of un reinforced Concrete of any description and in any position not otherwise specifically provided for

Material and labour for providing 100mm thick cement concrete 1:1.5:3 type A1 (using 20mm graded stone aggregates) as in floors and pavings laid in bays including necessary steel formwork, finishing the surfaces of concrete even and smooth without using extra cement all as specified and directed

Material and labour for forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with sealing compound Grade `A' all as specified and directed

Material and labour for forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade `A' all as specified and directed

Material and labour for providing 100mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregates) as in sub base all as specified and directed

Material and labour for providing precast cement concrete 1:1.5:3 type A1 (using 20mm graded stone aggregates) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water troughs,mangers, shelves and similar articles with plain faces including all moulds forms etc all as specified and directed

Material and labour for providing Mild steel bars (TMT) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc all as specified and directed

Taking out precast RCC drain covers of size exceeding 0.25sqm but not exceeding 0.6sqm and refixing at the same location after carrying out repair works of the drain all as directed. NOTE The covers shall be stacked aside neatly where directed and refixed. Any damage/theft etc to the covers whilst removal, placing and refixing shall be made good by new covers at no extra cost to the department as directed.

Material & Labour for preparing new/previously untreated steel surfaces of any description not otherwise described for over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Material and labour for providing cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregates) as in kerbs or mud stops, rounded or chamfered on edges including necessary steel formwork all as specified and directed

Material and labour for providing Brickwork with subclass ‘B’ burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) including demolition of old brickwork in cement mortar all as specified and directed

Material & Labour for rendering 15 mm thick in cement mortar (1:6) on brick/concrete masonry walls finished even and smooth without using extra cement all as specified and directed.

Material & Labour for rendering 10 mm thick in cement mortar (1:6) on brick/concrete masonry walls finished even and smooth using 3mm thick wall care putty including taking down old cement plaster from the surfaces including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

Material & Labour for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper (any tint) over a coat of primer all as specified and directed.

Taking out mild steel chequered plates of any size from the cable/pipe duct and refixing the same location after making good all as directed. NOTE The plates shall be stacked aside neatly where directed and refixed. Any damage/theft to the plates whilst removal, placing and refixing shall be made good by new plates at no extra cost to the department as directed.

Supply and fix rolled mild steel (structural steel work)as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410W grade E250(quality A) laid over cable ducts all as specified and directed

Supply and fix rolled mild steel sections (structural steel work) such as joist, channel, angle, or tee sections, in structural steel work fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of grade Fe-410W grade E250 (quality A) all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion (in concrete) and making good disturbed ground at locations all as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface as in soft/disintegrated rock all as specified and directed

Material and labour for providing cement concrete 1:3:6 type C2(using 40mm graded stone aggregates) as in walls or retaining walls,any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts(including caps and bases) all as specified and directed

Supply and fix rolled mild steel sections in structural steel work as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates conforming to Fe 290 Gde E-165 all as specified and directed

Supply and fix rolled mild steel sections as in in structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 all as specified and directed

Material and labour for providing mild steel sections like flat iron etc as in wind ties for roof including securing bolts, cutting tops to shape, drilling holes bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

Material and labour for providing pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and directed.

Material and labour for providing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Material and labour for providing 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc as specified and directed

Material and labour for providing 1.0mm thick Plain, black, mild steel sheeting, in ridges,hips, valley gutters,drip and straight flashings (length and girth as fixed) as specified and directed

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

Supply and fix 110mm bore of pipe PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified and directed

Supply and fix 110mm bore PVC (SWR) bends any radius all as specified and directed

Material and labour for preparing new surfaces of eaves gutter and pipes any description,n. exc 60 cm girth including holderbats, distance pieces, etc. and applying two coats of synthetic enamel paint over a coat of red oxide primer (length measured over bends, branches etc.)

Material & Labour for preparing previously treated (old) steel surfaces of any description not otherwise described for over 10cm width or girth and applying two coats of synthetic enamel paint all as specified and directed.

Material & Labour for complete removal of existing treatment from surfaces of walls, applying 3mm thick wall care putty and thereafter two coats of oil bound distemper (any tint) over a coat of primer including preparation of surfaces all as specified and directed.

Material and labour for preparing new plastered surfaces of walls and applying two coats of cement paint all as specified and directed.

Material and labour for preparing old or previously treated surfaces of walls and applying two coats of cement paint all as specified and directed.

Dismantling old Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings including ridges all as specified and directed

Material and labour for Point wiring with and including two single core PVC insulated, unsheathed multistranded copper conductor cable 1100 V grade of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC casing caping of suitable size on wall/ceiling/floors including PVC insulated unsheathed earth wire with multi stranded copper conductor cable 1100 V grade of size 1.5 sq.mm (FRLS) including PVC sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting switches, sockets including taking down carefully existing copper/aluminium point wiring (light, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets etc) all as specified and directed for one light point controlled by one, one way switch

all as per item 38 herein before but for One Ceiling or Exhaust fan point controlled by one, one way switch.

all as per item 38 herein before but for One 3 pin switch socket outlet, 5 Amp on the same board with other switches.

all as per item 38 herein before but for One 3 pin 5 amps switch socket outlet point on independent board.

All as per item Sl. No. 38 here in before but wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for 15 amps power point.

Supply and fix switch piano flush button single pole 1 way, 5 A, 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Switch socket combination 2 in 1, 5 A flush type 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Switch socket combination 5A/16A, 5 in 1 flush type universal 230 Volts,50Hz, ISI marked all as specified and as directed.

Supply and fix Ceiling rose, three terminals,230 Volt (ISI marked) surface bakelite suitable for batten fitting complete all as specified and as directed.

Supply and fix in repairs Turbo ventilator fan 24" dia made out of Aluminium, turbine diameter 720mm, air changes per hour shall be 20-40, Ventilation time shall be 15-30 hours etc complete all as specified, fixed as per manufacturers instructions and as directed. Make Alfa PEB Limited, Brand ARV Model TG-600 or equivalent approved in makes listed in particular specifications

S&F channel suitable for single 4 feet LED lamp with & including high efficiency LED linear lamp with high brightness 20 watts, 230 volts with control gear and all accessories complete all as specified and directed. (Make:Wipro LED batten cat no - WIO 921208, Wipro LED lamp cat no - LL13-181-65SE or equivalent in approved makes listed in p.s.

S&F channel suitable for double 4 feet LED lamp with & including high efficiency LED linear lamp with high brightness 20 watts, 230 volts with control gear and all accessories complete all as specified and directed. (Make:Wipro LED batten cat no - WIO 922208, Wipro LED lamp cat no - LL13-181-65SE or equivalent in approved makes listed in p.s.

Supply and fix lamp holder insulated body with back plate for angle/batten fitting with & including LED lamp of 09 watt complete all as specified and as directed.

Supply and fix 8 way SPN DB double door 240 volts with 200 amps rated bus bar, complete all as specified and as directed.

Supply and fix 4 way SPN DB double door 240 volts, with 200 amps rated bus barcomplete all as specified and as directed.

Supply and fix MCB SPN 240 volt 5 to 32 amp 10KA C series complete all as specified and as directed.

Supply and fix MCB single pole 240 volt 5 to 32 amps 10 KA, C series complete all as specified and as directed.

Material & Labour for providing sub Main Wiring with and including two runs of single core 4.0 Sqmm PVC insulated unsheathed FRLS cable with stranded copper conductor 1100V grade drawn in and including rigid PVC casing caping of suitable size including all accesories like tees, bends etc with and including one run of single core 4.0 Sqmm PVC insulated unsheathed FRLS cable with stranded copper conductor 1100V earth wire all as specified and directed. NOTE- Two runs of 4.0 sq.mm, one run of 4.0 sq.mm & one run of PVC casing caping with accessories shall be measured as One length. Unit rate quoted shall be deemed to be including taking down old sub main wiring

M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthling lead of 32x6 mm GI strip all as shown in Plate No. 4 to the earthing test point all as specified and indicated connected to test point all as specified and directed (The rate is including necessary earth work, PCC, chamber cover, watering pipe, wire mesh etc complete.) including testing on completion

Taking down & refixing ceiling fan 1200/1400mm sweep including two coats of synthetic enamel paint after cleaning,greasing(preparing surfaces) and replacement of nut bolts,washers, fan hook, rubber washer etc all as directed.

Supply & fix building Security light fitting 25 watt LED with pre die cast aluminium housing, toughened glass and accessories complete including street light bracket made out of 25 mm dia GI medium grade pipe 0.6 m long complete with nuts, bolts & washers including grouting on wall all as specified and directed.Make BAJAJ model No. BRLEP 25W LEDWH or equivalent approved make listed in particular specifications

S&F Aluminium Strip 25x3 mm over protection insulator with saddles and fixing screws/GI nuts and bolts,washers etc. for roof conductors and down conductors above ground level including taking down old strip complete all as specified and directed. Note : - Protection insulator will be measured and paid separately

S&F galvanised iron (GI) strip 32x6 mm over protection insulator with saddles and fixing screws/GI nuts and bolts,washers etc. for roof conductors and down conductors above ground level including taking down old strip complete all as specified and directed. Note : - Protection insulator will be measured and paid separately

S & F Air termination single pointed aluminium rod 12 mm dia and 300 mm long including taking down old rod complete all as specified.

S & F in repairs test point terminals block made of gun metal or phosphorus bronze size 75mm x 75mm drilled and screwed including 3 Nos 8mm dia, 25mm long hexagonal and screwed enclosed in in and including box duly powder coated and backed made out of GI sheet 2 mm thick of size 200x 150x100mm and screwed to wall complete all as specified and directed.

S & F in repairs epoxy base insulator of size 40mm height fixed on walls/ PCC block/on floor/on MS angle/on towers etc all as specified & as directed.

Material & Labour for rendering 10 mm thick in cement mortar (1:6) on brick/concrete masonry walls finished even and smooth without using extra cement including taking down old cement plaster from the surfaces including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

Supply and lay 40mm bore of tube steel water tubing medium grade, galvanised with and including all fittings like tees, bends, unions, connector pieces etc with screwed socket joints & fixed including taking up or down old tubing from locations, complete all as specified and directed

M/S SANDEEP H BHINGARDIVE

SINGH CONSTRUCTIONS