PressNITNo28ItemNo1

Supply of Submersible non clog sewage pumps with accessories such Panel, Duck foot bend, guide rails, base plate, foundation bolts, etc. as per specifications.-190 m3/hr) Head 25 M MOC Shaft – SS 410, Impeller - SS 8 C&F Body – CI, DJB Approved make

Manual coarse Bar Screen Suitable for Channel Dimension 1100x1100 mm Bar Spacing : 20 mm Angle of Inclination: 60 Degree MOC :SS304 Peak flow As per IS

Supply of 1 ton Manual Hoist Chain pulley block with single girder as per site requirement for pump house area as per technical specifications etc. Make- MORRIS / DJB Approved make

Supply of Sluice Valve:-cast iron double flanged manually operated sluice valve generally conform to IS:14846 having body, door, dome, gland in graded cast iron to IS:210, Gr.Fg.260, four faces of SS ASTM A743 Gr.CF8 and spindle nut of leaded tin bronze to IS:318, outside screwed rising stainless steel AISI:431 spindle. Valves to be tested by closed end method only. Flanges to be drilled as per IS:1538 Part-IV & VI. Valves are suitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1 rating) size- 150 mm dia Make- IVC / DJB Approved make

Supply of Cast Iron DF Swing Type Check Valve/Non Return Valve as per IS: 5312 Pt-1 single door check valve as per given site requirement size - 150 mm dia. DJB Approved make

Supply of Ductile iron delivery piping complete with flanged fittings, puddle pipe, dismantling joint, gaskets, bolts & nuts, etc., including specials. 150 mm dia

Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 - up to 600 mm dia DI 90deg bend 150 mm - 2 Nos DI Tee 300 x 300 x 150 – 1No DI Tee 300 x 300 x 150 – 1 No DI Dismantling joint 150 mm – 1 No DI Dismantling joint 150 mm - 1 No

Supply of Neoprene rubber sheet DJB Approved make

Providing Bolts, Nuts, washers etc for completion of works as per technical specifications.

Pressure Gauges with accessories 100 mm dia MAKE- H.GURU/ DJB Approved make

Fabrication/Supply of LT panel board cubical type, floor mounting, dust & vermin proof construction of the minimum size 1.5 sq meter of face area & 0.6 meter depth, suitable for indoor fixing, made out of 16 SWG CRCA sheet along with neutral link, having chambers suitable to switchgears to be fitted as below with provisions for cable entry from bottom. Considered earth bus bar GI strip 415 V MCC Panel with soft starter panels a. Incomer -400A, 36KA FP, MCCB with Thermal Magnetic Release Based (O\C, S\C) release - 1 Nos. b. Spreader Links & Extended ROH for 400A,36KA FP, MCCB - 1 Nos c. 3-Phase Digital Multifunction Meter, CL-1.0, 96x96sq.mm. - 1 Nos d. 3-Phase Digital Voltmeter 0-500V, CL-1.0, 96x96sq.mm. - 1 Nos e. 3-Phasc Digital Ammeter 0-400A, CL-1.0, 96x96sq.mm. - 1 Nos f. CT For meter Resin Cast CL-1400A/5A,15VA - 3 Nos g. CT For meter Resin Cast CL-1400A/5A,15VA for APFC Relay - 1 Nos h. Phase indication light LED type 220V AC - 1 Set i. Control MCB SP 6A ,10KA - 3 Nos j. CT Shorting Terminal - 4 Nos k. Neutral Link - Reputed - 1 - Nos. l. Outgoing Section - 1x250A MCCB O/G Feeder m. 250A,25 KA TP, MCCB with Thermal Magnetic Release Based (O/C,S/C) release – 1 No n. Spreader Links & Extended ROH for 250A, 25KA TP, MCCB - 1 Nos. o. 3x100A MCCB O/G Feeder p. 100A,25KA TP, MCCB with Thermal Magnetic Release Based (O/C,S/C) release - 3 Nos q. Spreader Links & Extended ROH for 100A, 25KA TP, MCCB - 3 Nos. r. 6x63A MCB O/G Feeder s. 63A TPN MCB 10KA - 6 Nos. t. Terminal 63A - 24 Nos. u. 4x32A MCB O/G Feeder v. 32A TPN MCB 10 KA - 6 Nos. w. Terminal 32A - 16 Nos. Make – ABB/L&T/Vaisno/ DJB Approved make

415 V APFC Panel (100 Kvar) MAKE-HAVELLS

Cables and Accessories 1.1 KV 3C X120 Sq mm XLPE Al Power cables - 100 Meter 1.1 KV 4C X16 Sq mm XLPE AL Power cables - 100 Meter 1.1 KV 4C X10 Sq mm XLPE Al Power cables - 100 Meter 1.1 KV 3C X2.5 Sq mm XLPE Cu Power cables - 100 Meter DJB Approved make

LT cable glands, lugs, etc DJB Approved make

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia. including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying, fixing and terminating following GI strips with PVC sleeves and wires in trenches below the ground including providing sand cushioning, brick protection etc. or laying on surface with GI clamps, bolts and nuts etc. Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. Nut bolt & spring washer spaced at 50mm)

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Cable Tray: - Supplying and installing following size of perforated pre-painted M.S. cable trays bends with perforation not more than 17.5%,joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 150 mm width X 50 mm depth X 1.6 mm thickness (instru.)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

3 pin 5/6 amps modular socket outlet, ISI marked

6 pin 15/16 amps modular socket outlet, ISI marked

Supply, delivery, erection, testing and commissioning 3 pole MCCB, 100A TPN, 16KA ,5 pin welding sockets

Wiring for circuit /sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required 2 2x2.5sq.mm+1x2.5 Sq.mm earth wire

Supply and fixing suitable GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch. connections etc. as required

Supply and fixing suitable GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch . connections etc. as required DJB Approved make

Supply of 1200mm. Sweep celling fans. DJB Approved make

Supply of 600 mm Air circulator with wall mounted. 3 blade DJB Approved make

Supply of heavy-duty exhaust fan of 450mm sweep, 900 RPM single face 230volt. 50Hz. DJB Approved make

Supply of surface and wall mounted 4 feet long, 22/ 24 W 6500 K LED batten , extruded aluminum housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. DJB Approved make

Installation, Testing and commissioning of pre-wired, fluorescent fitting /compact fluorescent fitting of all types, completed with all accessories and tube etc, directly on ceiling/wall, including connection with 1.5 sq mm FRLS PVC insulated , copper conductor, single core cable and earthing etc as required. DJB Approved make

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. DJB Approved make

Installation of exhaust fan in the existing opening including making good damage, connection, testing, commissioning etc. as required. DJB Approved make

Supply and fixing following way, single pole and neutral, sheet steel, MCCB distribution board,240 V , on surface recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar , Interconnections, powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 8 way , Double door DJB Approved make

Supply and fixing 5 amp to 32 amp rating, 240/415 volt, 10 KA, “C” curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole DJB Approved make

Supply and fixing 5 amp to 32 amp rating, 240/415 volt, 10 KA, “C” curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a)Double pole SOR item code – 32.10.3 DJB Approved make

Supply and fixing 5 amp to 32 amp rating, 240/415 volt, 10 KA, “C” curve , miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Three pole

Providing and fixing of 20mm dia ISI marked steel conduit

20mm inspection/solid bends

Supplying / fixing of 32mm. Dia x 2.00m long GI pipe (medium class) bracket for mounting of floroscent/HPMV/HPSV street light fitting on fall including brnding the pipe to the required shape, 2nos 40mm x 3mm flat iron clamps with nuts, bolt and washer, painti g the flat iron with primer and finish paint etc as required.

Supply of Pole mounted cable junction box of size having phase bar, neutral bar, din bar along with IP 65 protection with complete accessories as per site requirement Make – Sintex/Hesel/ DJB Approved make.

Fixing of control junction box with the help of nut, bolts, washers, fasteners etc as per site requirement.

Supply of Armoured 2 core 10 mm Aluminium multistrand sheathed cable Make- Gloster /Grandly /Universal/KEI/ DJB Approved make

Supply of single core 2.5 sq mm cu wire sheathed. Make- Gloster/Finolex/grandly / Universal/ DJB Approved make

Supply of single core 4 sq mm cu wire sheathed. Make- Gloster/Finolex/grandly /Universal/ DJB Approved make

Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall surface as reqd. (clamped with 1mm thick saddle) 2x 10 sq. mm , DJB Approved make

G.I.pipes80mm dia Size- 3.5mtr for external lighting- DJB Approved make

Supply of 45watt LED Street Light SOR (item code-19.10.5) DJB Approved make

Fire Fighting & Safety Equipments CO2 type fire extinguisher ISI marked conforming to IS: 15683, complete with delivery hose horn, wheel type release valve, locking arrangement, operation manual and bracket, operating temperature: - 300 C to + 600 C(24.1) 4.5 kg

Shock Treatment Chart

Caution and Danger Board

Hand Gloves tested for 11kV

Safety Shoes

Caution tape

Fire bucket stand for six buckets

Heavy duty leek proof fire bucket as per IS: 2546/1974

safety helmat

Insulating mats for electricial purpose converging to IS 1562 / 2000 of 3 mm thickness

Erection , Testing and Commissioning of submersible pumps, piping, panels and other related items to complete the work etc.

O&M cost of 365 days i/c DLP Skilled staff (Electrician) for operation of E&M equipment 1 no. each shift (Total 3No.). Unskilled staff (Beldar) for helping the electrician and watch and ward of the pump house etc.1 nos. in each shift (including rest reliever) (Total 3No.).

AQUA GASEOUS CONTROLS (INDIA)