Reconstruction, maintenance, and painting work at Hindu Vidyalaya Inter College, Jaswantnagar (Jaswantnagar Development Block, Etawah) under the Project Alankar Scheme

Demolishing RCC Work Manualiy by mechanical means including Stacking of Steel bar and disposal of unseviceable material with in 50m lead as per direction of Engineer-in-charge CH-17 No 15.3

R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors & window excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and T&P etc. required for proper completion of the work. binding wire cost being included in the item. As in item No. 283 above but for slabs

Mild Steel or iron in plain work such as reinforced concrete or reinforcement brick work (when not included in an over all rates) wrought to required shape as necessary including benefit for proper completion fo the work and including supply of all steel and wastage and over lappign and hooks. Ch-10 No 504

Cement concrete with 4 cm gauge approved stone ballast approved coarse sand cement in the proportion of 4:2:1 including supply of all material T&P etc. required for proper completion of work. As in item (279) above but in the proportion of 8:4:1

First class brick work in 1:6 cement and fine sand of 1.25 F.M. mortar in foundation plinth including supply of all materials, labour and T&P etc. required for proper completion of work. Same as above in item No. 303 but in at coarse sand 1:6

First class brick work in 1:6 cement and fine sand of 1.25 F.M. mortar in foundation plinth including supply of all materials, labour and T&P etc. required for proper completion of work. Same as above in item No. 303 but in at coarse sand 1:6 . As in item 303 above but in superstructure, including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness wall not to be less than 1½ brick thick. Add for extra labour to above items.

12mm Cement plaster with cement mortar in proportion of 1:6 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. ch-13 no-13.4

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under,including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all completeas per direction of Engineer-in-Charge. ch-18, no-14.1

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone of size 40mm nominal size) laid in one layer finished with floating coat of neat cement (40mm thick floor) Ch-14,no-665

Precast terrazzo tiles 20mm thick with white, black or white and black marble chip of sizes upto 6mm laid in floors, treads of steps and landing on bed of 25mm average thickness of cement mortar 1:3 (cement : coarse sand) joined with neat cement slurry mixed with pigment to match the shade of tile including rubbing an polishing complete with precast tiles of Ch- 14., No-14.18