DAY TO DAY REPAIR MAINT OF EXTERNAL ELECTRIC SUPPLY COMPREHENSIVE EM WORKS AND MAINT OF FIRE ALARM SYSTEM REPAIR MAINT OF DG SET 750 KVA 03 NOS AT MH AREA BAIRAGARH UNDER GE BHOPAL

Amount

DAY TO DAY REPAIR/MAINT OF EXTERNAL ELECTRIC SUPPLY AT MH BHOPAL

Taking down defective 40/150/250/400 watt SV/MH street light fittings, security light, CFL/flourescent tube light fittings (ant type & size), LED light any type, through ladders, mounted on any typr of poles/bldgs (upto 13 mtr height) with bracket, disconnecting, testing all components, dismantling for replacemnt defective components such as choke, ignitors, holders, capacitors, lamps, driver, etc and providing suitable new PVC cable for internal wiring, including cleaning of cover, connection with supply and testing the light fitting after fixing of new components and then mounting to its original position and making the fitting functional complete all as specified and directed. Note : (i) No T &P will be issued by the Department. (ii) S&F Spares parts such as choke, ignitor, lamp holder, cable, lamps, etc shall be measured and paid separately (iii) Rates also include repairing of defective street light timers, fault in street light feeders, etc (iv) During period of currency of CA any fitting will be not considered for more than once for payment purpose.

Taking down defective 150/250/400 watt SV/MH/LED lamp type light fittings (aprox 6 to 9 Nos in each fitting), integral/ non integral type flood light fitting, aviation light, etc, any type, mounted on semi high mast pole upto 12 mtr height fixed on brackets/round ring (cage), disconnecting, testing all components, dismantling for replacement of defective components such as choke, ignitors, holders, capacitors, etc and providing suitable new PVC cable for internal wiring, including cleaning of cover, connection with supply and testing the street light fitting after fixing new components and then mounting to its original position and making the fitting functional complete all as specified and directed. Note : (i) No T &P will be issued by the Department. (ii) S&F Spares parts such as choke, ignitor, lamp holder, cable, lamps, etc shall be measured and paid separately (iii) Rates also include repairing of defective street light timers, fault in street light feeders, etc (iv) During period of currency of CA any fitting will be not considered for more than once for payment purpose.

S&F in repairs 400 watt HPSV/MH open construction electromagnetic ballast consisting of high quality silicon steel lamination, super enamelled copper wire, vacuum impriganated with white resin, terminal block with tapping for 220/240 volt, 50 Hz complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS as approved by GE.]

S&F in repairs LED driver suitable for 45Watt LED light ( to suit as existing light fittings of any make) complet all as specified and directed. Make : Wipro/Bajaj/Cromption/Havells/Phiips as approved by GE)

S&F in repairs LED driver suitable for 60Watt LED light ( to suit as existing light fittings of any make) complet all as specified and directed. Make : Wipro/Bajaj/Cromption/Havells/Phiips as approved by GE)

S&F in repairs 400 watt MH lamp SE/DE tubular suitable for integral / non integral street/flood light luminairs complete all as specified and directed. [MAKE: WIPRO/BAJAJ/CROMPTON/HAVELLS/PHILIPS/LUKER as approved by GE.]

S&F in repairs twin core 4.0 sqmm PVC insulated and PVC sheathed stranded aluminium conductor complete all as specified and directed.

S&F in repairs Street light brackets made out of GI tubing, light grade, 32 mm bore 1200mm long, bent to shape at 120 degree, fixed on pole by providing MS clamp made up of flat iron 40 x 5 mm including bolts, nuts and washer of suitable size incuding painting the bracket & clamp with two coats of aluminium paint over a coat of primer complete all as specified and directed.

S&F in replacement Integral LED Street light luminaire of 45 W, comprising of pressure die cast aluminium housing LED street light luminaire, IP 66 protection and with all fixing arangement, nuts, bolts and washer connecting to electric system with 4.0 sqmm PVC Aluminium stranded conductor 2 coreof required length from light fitting to street light control box on pole , testing and completion, complete all as specified and directed at site. Make- Bajaj, Cat No BRTFG 45 W LED or Equivalent in CG/ Philips/Havells as approved by GE.

S&F LED flood light luminaire 120 Watt with secondary optics made in pressure die cast housing & heat sink in aluminium extrusion with IP 66 protection and with all fixing arrangement, nut , bolt and washer connecting to electric system with 4.0 sqmm PVC Aluminium stranded conductor 2 core of required length from light fitting to street light control box on pole , testing and completion including taking down existing flood light fitting any type (up to 17 mtr length) complete all as specified and directed. Make- Bajaj Cat No. BJFL120W or Equivalent in CG/ Philips/Havells.

S&F in repairs Nature switch (Model- Swadeep 02) sensor with & including switching timer complete all as specified and directed. [MAKE: KAKATIYA ENERGY SYSTEM/BAJAJ/ HEALER as approved by GE.]

S&F in repairs 3 Pole contactor of AC 3 rating 25 Amp, 3 Phase, 415 V as per IS 13947-4-1 suitable for nature time switch (Model- Swadeep 02) complete all as specified and directed. [MAKE: BCH/L&T/SCHNEIDER as approved by GE.]

S&F in repairs single Pole contactor 16 Amp, single Phase, 240 V as per IS 13947-4-1 suitable for nature time switch (Model- Swadeep 02) complete all as specified and directed. [MAKE: BCH/L&T/SCHNEIDER as approved by GE.]

S&F in repair 3 Pole contactor of AC 3 rating 95 Amp, AC1 rating 160 Amp, type MNX 95, Aux cont 2NO +2NC, 3 Phase, 415 V , as per IS 13947-4-1, complete all as specified and directed. Make :- L&T, Cat No. CS 94136 or equivalent in Siemens/ Schinder.

M&L for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including filling at road cuttings or making pillars for supporting pipe including necessary form work complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in copings to poles & the like, etc including weathering, slightly rounded or chamfered angles and throating as directed. including necessary form work complete all as specified and directed.

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 10 sqmm, 4 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE]

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 16 sqmm, 4 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE]

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 25 sqmm, 3.5 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE]

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 35 sqmm, 3.5 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE]

Supply, laying, connecting and testing LT XLPE insulated, screened, PVC bedded, armoured, heavy duty cable with aluminium conductor of size 16 sqmm, 2 core, 1100 volts grade, laid in trenches, passing through pipes/ducts, etc including taking out old unserveciable cable, any type complete all as specified and directed. [MAKE:- POLYCAB /HAVELLS INDIA LTD/V-MARC as approved by GE]

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for pole foundation, cable trench, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed. at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid]

Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed

S&F 50mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed. [MAKE:-TATA / JINDAL / PRAKASH / SWASTIK as approved by GE]

M&L for painting of steel pole (swan neck type or straight type) up to 12 mtr height with cross arms, clamp of any length and shape for LT overhead line/street light with two coats of aluminium paint after scratching out old paint, cleaning the existing surface rust free, preparation of the surface including marking pole numbers in a 20 cm dia yellow circle with number writing with black synthetic paint & painting strips in alternate from bottom to top with three strips of black synthetic paint & two strips of white fluorescent paint (up to 1.5 mtr height) throughout the circumference of pole ( width of each strip shall be of 30 cm), including one coat of lime wash on PCC copping of pole complete all as specified and directed.

Supply fixing testing and comissioning of automatic street light switch of capacity 8KW in three phase, using Nature switch for automatic switching of street lights based on LUX level of natural light. The sensor (nature switch) along with suitable power contractor, MCB and support terminals enclosed in pole/ wall mounted enclouser made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (Make: Sintex) conforming to IP54, including mounting arrangement with suitable size of FI clamps 02 Nos with complete acessories including taking down old unserviceable automatic street light switch complete all as specified and directed. Make:- KAKATIYA ENERGY SYSTEM LIMITED Model No. SWADEEP - 02EC8KW3P, The automatic switching unit shall comprising of following: (i) Contractor rating (AC3) 25Amp 4 Pole or 3 Nos 25Amp 1 Pole: Make : BCH/L&T/Schneider (ii) MCB 32Amps (SP),10 KA ,240 volts (SP 3Nos) Make : Schneider/ Legrand/ L&T (iii) NATURESWITCH-01 Make: KAKATIYA ENERGY SYSTEM LIMITED

Supply, fixing testing and comissioning, of automatic street light switch of capacity 8KW in single phase, using Nature switch for automatic switching of street lights based on LUX level of natural light. The sensor (nature switch) along with suitable power contractor, MCB and support terminals enclosed in pole/ wall mounted enclouser made of rust proof, electric shock proof, termite proof and FR grade SMC junction box (Make: Sintex) conforming to IP54, including mounting arrangement with suitable size of FI clamps 02 Nos with complete acessories including taking down old unserviceable automatic street light switch complete all as specified and directed. Make:- KAKATIYA ENERGY SYSTEM LIMITED Model No. SWADEEP - 02EC8KW1P, The automatic switching unit shall comprising of following: (i) Contractor rating (AC3) single phase 50-60 Amp : Make : BCH/L&T/Schneider (ii) MCB 63 Amps (SP),10 KA ,240 volts. Make : Schneider/ Legrand/ L&T (iii) NATURESWITCH-01 Make: KAKATIYA ENERGY SYSTEM LIMITED

S&F in replacement of MCCB, 250 Amp, 4 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 200-250 Amp including spreader terminals and phase barriers. Make: L&T (d - sine) Cat No. CM90638OOPO or equivelent in Schneider/ C&S.

S&F MCCB, 200 Amp, 3 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 160-200 Amp including spreader terminals and phase barriers. Make: L&T (d - sine) Cat No. CM90638OONO or equivelent in Schneider/ C&S.

S&F MCCB, 160 Amp, 3 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 125-160 Amp including spreader terminals and phase barriers. Make: L&T (d - sine) Cat No. CM90638OOMO or equivelent in Schneider/ C&S.

S&F MCCB, 100 Amp, 3 Pole, 25 KA, 415 V, thermal magnetic release type, Ics=100 % Icu, with adjustable overload setting and adjustable short circuit setting , with thermal release range 80-100 Amp including spreader terminals and phase barriers. Make L&T Cat No. SL972090000 or equivelent in Schneider/ C&S.

M&L for cutting PCC/floor/road and taking out cable and making good, including material as per existing after laying of pipe for cable protection size of trench not more than 0.30 x 0.30 m complete all as specified and directed.

Supply and fixing MS Sheet 2mm thick control gear box for street security light of size not less than 250 mm (w) x 300 mm (h) x 200 mm (depth), with aluminium bus bar of 32 Amps rating for single phase & neutral mounted on apoxy based insulators with locking arrangement fixed to pole with MS clamps -2 Nos of 20 mmx 4 mm and including MCB SP 6 Amps, B curve 230 volt- 01 No, including taking out existing unserviceable street light control box complete all as specified and directed.

S&F in repair Analog time switch (FM series) complete all as specified and directed. Make : GIC (L&T) or equivalent as approved by GE

COMPREHENSIVE E/M MAINT WORKS AT BAIRAGARH

Taking down carefully existing point wiring (any type viz. aluminum or copper) with wooden batten/surface PVC conduit (with its fittings)/PVC casing-capping or any other type for light, fan, power point (including switch, socket, ceiling rose, etc.) and making good disturbed surface of wall/ceiling to match with existing surface after necessary rewiring complete all as specified and directed.

Taking down unserviceable sub main wiring including service connections, of any size and any description including conduit pipe and making good disturbed surface of wall/ceiling to match with existing surface after necessary rewiring complete all as specified and directed.

Taking down old unserviceable MCB DB of any size and capacity including wooden boards complete all as specified and directed.

M&L for point wiring for one light / fan / bell point with 1.50 sqmm (nominal area) FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade, controlled by one one-way switch, drawn in and including non metallic rigid PVC casing capping not less than 25mm base size with all fitting and fixing accessories including one run of 1.5 sqmm copper conductor as earth continuity wire connected to common earth dolly by suitable lugs, sunken sheet steel terminal box made out of 1.20 mm thick GI/MS sheet for mounting of fittings like switches, sockets, fan regulators, etc. with 3mm thick laminated hylum sheet cover complete all as specified and directed. [Make of Cable : Polycab/ Plaza/ Havells/KEI/V-MARC as approved by GE] Note : Wiring to be done as per approved colour code in IE rule.

All as per BOQ item No.42.00 above, but for one light point controlled by two 2 way switches complete all as specified and directed.

All as per BOQ item No.42.00 above, but for 3 pin 5 Amp socket outlet on independent board complete all as specified and directed.

All as per BOQ item No.138 above, one 5 Amps socket outlet point controlled by one switch on same board with other switches complete all as specified and directed.

All as per BOQ item No.138 above, but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket combination on or 3 pin socket out let 15 amp independent board and provision of 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

All as per BOQ item No.42.00 above, but wiring with 4.0 Sq mm copper cable for 5/15 amp switch socket combination or 3 pin socket out let 15 amp on independent board and provision of 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

M&L for point wiring for one light / fan / bell point with 1.50 sqmm (nominal area) FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade, controlled by one one-way switch, drawn in & including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm diameter with all conduit accessories in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 (except on ceiling for fan point only, surface casing capping will be used in lieu of concealed PVC conduit) including one run of 1.5 sqmm copper conductor as earth continuity wire connected to common earth dolly, sunk sheet steel terminal box made out of 1.20 mm thick GI/MS sheet for mounting of fittings like switches, sockets, fan regulators etc. with 3mm thick laminated hylum sheet cover complete all as specified and directed. [Make of Cable : Polycab/ Plaza/ Havells/KEI/V-MARC as approved by GE] Note : Wiring to be done as per approved colour code in IE rule.

All as per BOQ item No. 48.00 above, but for 3 pin 5 Amp socket outlet on independent board complete all as specified and directed.

All as per BOQ item No. 48.00 above, one 5 Amps socket outlet point controlled by one switch on same board with other switches complete all as specified and directed.

All as per BOQ item No.48.00 above, but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket combination on or 3 pin socket out let 15 amp independent board and provision of 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

M&L for point wiring for one light / fan / bell point with 1.50 sqmm (nominal area) FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade, controlled by one one-way switch, drawn in existing concealed conduit including one run of 1.5 sqmm copper conductor as earth continuity wire connected to common earth dolly by suitable lugs and 3mm thick laminated hylum sheet cover including taking old point wiring (any type without conduit) complete all as specified and directed. [Make of Cable : Polycab/ Plaza/ Havells/KEI/V-MARC as approved by GE] Note : Wiring to be done as per approved colour code in IE rule.

All as per BOQ item No.52.00 above, but for 3 pin 5 Amp socket outlet on independent board complete all as specified and directed.

All as per BOQ item No. 52.00 above, one 5 Amps socket outlet point controlled by one switch on same board with other switches complete all as specified and directed.

All as per BOQ item No. 52.00 above, but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket combination on independent board and provision of 2.5 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

All as per BOQ item No. 52.00 above, but for two light point controlled by two 2 way switches complete all as specified and directed.

All as per BOQ item No. 52.00 above, but wiring with 4.0 Sq mm copper cable for 5/15 amp switch socket combination or 3 pin socket out let 15 amp on independent board and provision of 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way, 5/6 Amps, 230 volt AC, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR/LEADER/CONA as approved by GE]

S&F Socket outlet multipurpose having provision for 3 pin, 5 Amp and 2 pin, 5 Amp, piano flush type, 230 volt AC complete all as specified and as directed. [MAKE:-ANCHOR/LEADER/CONA as approved by GE]

S&F Switch socket combination, multipurpose, 6 pin, 5-15 Amp, flush type, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR/LEADER/CONA as approved by GE]

S&F Ceiling rose surface bakelite, three terminals complete all as specified and as directed. [MAKE:-ANCHOR/LEADER/CONA as approved by GE]

S&F Bell push, flush type, 5 Amp piano type, 230 volt AC ISI marked with valid CML No complete all as specified and as directed. [MAKE:-ANCHOR/LEADER/CONA as approved by GE]

S&F Switch piano, flush type, single pole, two way, 5/6 Amps, 230 volt AC, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR/LEADER/CONA as approved by GE]

S&F Bell, electric, single phase, 230 volt, AC ISI marked with valid CML No complete all as specified and as directed. [MAKE:-ANCHOR/LEADER/CONA as approved by GE]

S&F lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings with & including LED lamp white 12 watt retrofit, 230 volts complete all as specified and directed. [MAKE FOR HOLDER:-ANCHOR /LEADER/CONA & LAMP : BAJAJ/PHILIPS/SYSKA all as approved by GE]

S&F ceiling fan regulator electronic step type 240 V, AC 50 Hz single pole, 100 watts flush type, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR/LEADER/CONA as approved by GE]

S&F in replacement TPN, 4 way, Distribution board, double door, including fixing and connecting of MCBs/ isolator, ELCBs, etc factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral link and 200 Amps 440 volts rated bus bar. DB shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, between powder painting process the sheet steel having to go through the anti-rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosive atmosphere. The DB shall be double door type with hinged door with locking arrangement. The DB shall be of same make as MCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits. The DB shall be of IP 43 protection class complete all as specified and as directed. [MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE] NOTE:- MCB shall be measured and paid seperatly.

S&F in replacement sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar 10 KA, 12 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed. [MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE] NOTE:- MCB shall be measured and paid seperatly.

S&F in replacement sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar 10 KA, 8 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed. [MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE] NOTE:- MCB shall be measured and paid seperatly.

S&F in replacement sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar 10 KA, 4 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed. [MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE] NOTE:- MCB shall be measured and paid seperatly.

S&F in replacement MCB TPN, 415 volts, 10 KA breaking capacity, 'C' curve, of capacity 63 amps complete all as specified and directed. [MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE]

S&F in replacement MCB TPN, 415 volts, 10 KA breaking capacity, 'C' curve, of capacity upto 40 amps complete all as specified and directed. [MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE]

S&F in replacement MCB SP, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 5 to 32 amps complete all as specified and directed. [MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE]

S&F in replacement MCB SPN, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 6 to 32 amps complete all as specified and directed. [MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE]

S&F in replacement MCB SPN, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 40 to 63 amps complete all as specified and directed. [MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE]

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. 20mm external diameter and PVC insulated stranded copper conductor of 2.5 sqmm nominal cross section area as earth wire complete all as specified and directed. [Make of Cable : Polycab/ Plaza/ Havells/KEI/V-MARC as approved by GE] Note: - Two runs of 4.0 sqmm cable, one run of 2.5 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100V unsheathed with stranded copper conductor of 6.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. 20mm external diameter and PVC insulated stranded copper conductor of 4 sqmm nominal cross section area as earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. [Make of Cable : Polycab/ Plaza/ Havells/KEI/V-MARC as approved by GE] Note: - Two runs of 6.0 sqmm cable, one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with four single core PVC insulated FRLS cable 1100V unsheathed with stranded copper conductor of 10.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. 25mm external diameter and PVC insulated stranded copper conductor of 10 sqmm nominal cross section area as earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. [Make of Cable : Polycab/ Plaza/ Havells/KEI/V-MARC as approved by GE] Note: - Four runs of 10.0 sqmm cable, one run of 10.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.

S&F in replacement sheet metal earth plug & socket, single pole and neutral with and including 1no. single pole MCB 20 Amps 240 volts complete all as specified and directed. [Make:-Legrand Cat No. 607841 or equivalent in Crabtree/C&S as approved by GE].

S&F in replacement sheet metal enclosure factory fabricated for Multiphase Out going suitable for Mounting MCCB as Incomer of rating 100 Amp Vertical distribution board 4 way with suitable Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified. Cat No - DBVDD04160TAB -MCCB of HPL or Equivalent Model Havells/Legrand/ABB as Approved by GE. ( Note : MCCB & MCB Shall be Measured and Paid Separately )

S&F for MCCB 100 Amp, 16 KA 3 Pole including complete electrical connection by appropriate size of copper lugs complete all as specified and directed by the Engr-in-Charge.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR-2009 Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by 15mm dia light grade GI pipe and watering pipe shall be 20mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. NOTE :- (i) The concrete pit shall be PCC (1:3:6) type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) The unit rate includes the cost of GI pipe medium grade for protection of earth wire and 4mm dia earh lead wire upto 7.5 M. (iii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself.

S&F in repairs laminated sheet cover, ISI marked, (Make- Hylem), cut with grooves for mounting of fittings like switches, sockets, fan regulators, etc. including fixing in location with new galvanised screw and cup washer complete all as specified and directed.

S&F in repairs CFL 11 W, 240 V, 50 Hz suitable for 2x11 W surface mounting CFL luminaries complete all as specified and directed. [Make: Bajaj/ Philips/Wipro/Crompton as approved by GE]

S&F in repairs electronic ballast 1 x 11 watt, 240 V, 50 Hz suitable for 2x11 W surface mounting CFL luminaries complete all as specified and as directed. [Make: BAJAJ (Cat No.539315) or equvalent in Philips/Wipro/Crompton as approved by GE]. NOTE:-Ballast without taking down of fitting will be measured under this item.

Taking out u/s CFL lamp 36W from light fittings and S&F LED CFL Lamp 18W , 4 pin type , retrofit complete suitable for surface mounting CFL Luminaires 1X36W or 2X36W, complete all as specified and directed. Make:- Polycab/Syska/CG

Repair/Replacement of us CFL lamp 36W from light fittings, 4 pin typ , retrofit complete suitable for surface mounting CFL Luminaires 1X36W or 2X36W, complete all as specified and directed. Make:- Polycab/Syska/CG

Supply and fixing electronic ballast 36 watt, suitable for 2X36W or 1X 36W surface mounting CFL Luminaires complete all as specified and directed. [Make: BAJAJ/ Philips/Wipro/Crompton as approved by GE].

S&F LED 20 W/21Watt tube light fitting (T8 type), including LED retrofit tube 20/21 W one side connection type, 240 v, PF > 0.90, colour Temp 6500 K, System Luminious efficacy > 100Lm/W, complete with powder coated CRCA decorative patti suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting including taking down old light fitting any type complete all as specified & directed. Make :-Bajaj ( For Batten Model No. BLRB DB 118 or suitable for mounting T8 LED tube 20 watt and For LED tube Model No. BLRB21WCWc) or C&S cat Part No. LTDC01220WLED/WD (LED battan T8 TARA -M) or Havells (Titania LED tube with Regal batten LED) or equivalent in Philips/ Crompton as approved by GE.

Supply and fixing in replacement electronic ballast 28 watt, suitable for T-5 fittings complete all as specified and directed. [Make: BAJAJ/ Philips/Wipro/Crompton as approved by GE].

Supply and fixing in replacement LED tube rod 28 watt,suitable for T-5 fittings complete all as specified and directed. [Make: BAJAJ/ Philips/Wipro/Crompton as approved by GE].

Supply and fixing in replacement electronic ballast 36 watt,suitable for T-5 fittings complete all as specified and directed. [Make: BAJAJ/ Philips/Wipro/Crompton as approved by GE].

Supply and fixing in replacement tube rod 36 watt,suitable for T-5 fittings complete all as specified and directed. [Make: BAJAJ/ Philips/Wipro/Crompton as approved by GE].

Dismantling of ceiling fans AC single phase 230 volts of sizes 1200mm/1400mm (collected from MES fan store ) any make / model except old vintage, dismantled its stator,rotor, cutting out burnt copper winding and providing new winding with super enamelled copper winding wire existing size including cleaning of slots providing oil impregnated insulation paper or minimax, fibre, insulation in slots and well wraping with cotton tape, bind with cotton thread and varnishing over all with winding varnish as aproved by Engineer - In - chargee cleaning of bearing housing and shaft, replacing spares such as split pins, blade screws etc as required all as specified and directed by Engineer -In - charge.

All as per item no. 94.00 above but for exhaust fan of following sizes :-

400/450mm sweep AC single phase 230/240 volts

300/380mm sweep AC single phase 230/240 volts

230/250mm sweep AC single phase 230/240 volts

All as per item No 94.00 above but for wall fan/padestal fan of any sweep and capacity

S&F condenser carrier clip (PVC) in build connector two way fixed with screw on down rod or housing complete all as specified and directed.

S&F upper set of clips for down rod with rubber Bush (Garari) including set of nut bolts and washer, pin complete all as specified and directed.

S&F rubber bush ( Garari ) for mounted at upper side of down rod clip all as specified and directed

S&F gun metal bush self lubricated, any size ,suitable for ceiling and wall fans complete all as specified and directed

S&F flexible copper conductor stranded 1100 Volt PVC insulated cable twin core twisted 23/0.0076 Sq mm size, complete all as specified and directed.

S&F in replacement Fan condenser, 230 Volts of the following sizes :- [Make: Epcos/Tibcon as approved by GE]

S&F ball bearing of following sizes :- [Make:SKF/NBC/FAG as approved by GE]

NBC/ SKF - 6201 'ZZ' (set of two)

NBC/ SKF - 6202'ZZ' (set of two)

NBC/ SKF - 6203'ZZ' (set of two)

NBC/ SKF - 6204'ZZ' (set of two)

Taking down ceiling fan/wall fan from fan hook and disconnection from ceiling rose and dismantling of ceiling parts i e. down rod and connector/condenser nut bolts, split pins, rubber bush (garari) condenser carrier clip (PVC) in build connector two way complete servicing by cleaning greasing/oiling before in side surface by CTC with sand paper and repair and re - fitted the same position and testing complete all as specified and directed. ( Note: - Only rubber packing (garari) condenser, condenser carrier clip (PVC) in build connector two way shall be measured and paid separately)

Taking down Exhaust fan any type and disconnection from ceiling rose and dismantling i.e connector/condenser nut bolts, condenser carrier clip (PVC) in build connector two way complete servicing by cleaning greasing/oiling before in side surface by CTC with sand paper and repair and re - fitted the same position and testing complete all as specified and directed on site (Note: - condenser, condenser carrier clip (PVC) in build connector two way shall be measured and paid separately

S&F in replacement down rod for ceiling fans duly painted with synthetic enameled paint 300 mm long19 mm outer dia with holes on both ends of the rod for connection wire replacement complete all as specified and directed.

S&F in replacement down rod for ceiling fans duly painted with synthetic enameled paint 600 mm long19 mm outer dia with holes on both ends of the rod for connection wire replacement complete all as specified and directed

S&F in replacement Exhaust fan blade duly painted suitable for 450 mm/380mm sweep complete all as specified and directed

S&F in replacement Exhaust fan blade duly painted suitable for 300 mm/230 mm sweep complete all as specified and directed

S&F in replacement of fan blade suitable for 1200mm sweep ceiling fan complete similar to original make with new screws complete all as specified and directed.

All as per item No. 120.00 above but 1400mm sweep.

S&F in replacement outer frame complete with clamps, rubber packing, nut bolts etc & all accessories duly painted suitable for 450 mm /380 mm sweep exhaust fans complete all as specified and directed.

S&F in replacement outer frame complete with clamps, rubber packing, nut bolts etc & all accessories duly painted suitable for 230/300 mm sweep exhaust fans complete all as specified and directed.

M&L for painting of ceiling fan with two coat synthatic enamel paint after surface preparation including Writing/making of MES No size of letters not less than 2.0 CM high and not more than 50 alphabets as approved colour complete all as specified and directed.

Dismantling of cabin fan of any sweep and overhauling complete by means of cleaning of stator, oiling & greasing including replacement of nut and bolt etc and reassembling the same and testing complete all as specified and directed.

Dismantling of cabin fan of any sweep and rewinding the stator with super enameled copper winding wire of suitable size including greasing, cleaning of all components of fan reassembling , testing, commission complete all as specified and directed.

Removing unserviceable bearing shaft welding broken area and threading in lathemachine at appropriate size and refixing in ceiling fan any type complete all as specified and directed.

Taking down unserviceable Fresh Air fan and S&F PVC fresh air fan of 300 mm sweep in toilets compete with louvers including all civil work like cutting and making opening in existing wall of toilet etc , including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make:CG/Bajaj/Havells.

S&F in replacement landscaping LED light 9 watt, mushroom shape, integral decorative, LED bollard with IP 65 protection complete all as specified and directed. [Make:-Bajaj (Cat No.BLMC 9W WW LED) or equivalent in Philips/ Crompton/ Havells/ Wipro as approved by GE].

Taking down carefully storage type water heater (Geysers) of any make and any capacity at any height opening for inspection compete Including heating element inner copper tank etc. De-scaling cleaning and re-assembling of Geysers after repairs carrying out and re-fixing in same position (spares as required for repair geyser are measured and paid separately) including making good to walls with CM (1:3) or PCC (1:2:4) and plastering the wall surfaces with CM 1:6 and replacement of old nuts, bolts and rubber gasket etc complete all as specified and directed.

Taking down and Supply and Fixing 1.5 KW capacity Heating Element, Push/ Screw type with ‘O’ ring including making electrical connection complete all as directed by the Engineer-in-Charge.

All as per item No 131.00 above but of capacity 2.0 KW

S&F in replacement Geyser assembly suitable for 25 ltr capacity ISI marked including dismantling of old unserviceable geyser assembly complete all as specified & directed.

All as per item No 133.00 above but capacity of geysers 50 litres.

S&F in replacement thermostate suitable for 25/50 Ltr Geyser ISI marked complete all as specified & directed.

S&F in replacement inner tank made of steel suitable for 25 Ltr geyser including dismantling of old unserviceable inner tank complete all as specified & directed.

S&F in replacement of inner tank made of steel suitable for 50 Ltr geyser including dismantling of old unserviceable inner tank complete all as specified & directed.

S&F in replacement outer tank made of steel suitable for 25 Ltr Geyser including dismantling of old unserviceable outer tank complete all as specified & directed.

S&F in replacement outer tank made of steel suitable for 50 Ltr Geyser including dismantling of old unserviceable outer tank complete all as specified & directed.

S&F in replacement of bottom cover suitable for 25 Ltr Geyser including dismantling of old unserviceable bottom cover complete all as specified & directed.

S&F in replacement of bottom cover suitable for 50 Ltr Geyser including dismantling of old unserviceable bottom cover complete all as specified & directed.

Supply & replacement indicating lamp 230 volts 50 HZ AC suitable for geyser any type (round,squire or rectangular type) any capacity complete all as specified & directed.

Supply & replacement sheet metal enclosure with industrial type 3 pin socket and plug including one MCB single pole 32 Amps 240 volts 50 HZ complete all as specified & directed.

S&F in replacement of copper connection 15 mm dia 45 cm long with both side nut complete all as specified & directed.

S&F in replacement of PVC connection heavy duty 15mm dia 45 cm long with PTMT nutscomplete all as specified & directed.

S&F in replacement of pressure release valve suitable for 25/50 Ltr capacity geyser complete all as specified & directed.

Taking out old U/S voltage stabilizers of capacity 0.5 KVA to 5 KVA from MES store/site and repair the same in MES work shop (if the transformer found burnt, the in same shall be re-winded in the workshop of contractor as directed by Eng in Charge.

Taking out old burnt winding work and re-winded with super enameled copper winding wire (existing size) for 5 KVA voltage stabilizers including all necessary insulating material and testing complete.

All as per item No 148.00 above but capacity of voltage stabilizer 4 KVA/3KVA.

All as per item No 148.00 above but capacity of voltage stabilizer 2 KVA / 1KVA.

REPAIR AND MAINT OF DG SETS AND SOLAR WATER HEATER

M&L for complete servicing of solar hot water system (solar water heater, flate plate collector type), with cleaning of sluge deposited in pipe line of solar pannel by using cleaning regent, check and repair of pipe line for any leakage, including carring out brazing of copper pipe for leakage, cleaning of glass shell, cleaning of hot water tank, replacement of u/s clamps, adopter, hose pipe and minor parts etc including complete sevicing to keep the plant functional of capacity up to 300 LPD (Note :- The spare parts shall be measured and paid for separate under respective items).

M&L for replacement of electrical heating element of 3.0 KW (long thread type, as per existing), ISI marked, of solar water heater of cap up to 300 LPD. Make: Solar Element or equivelent as approved by GE.

M&L for replacement of thermostate, long body, ISI marked of solar water heater of cap up to 300 LPD.

M&L for replacement of solar hot water tank with thermal insulation suitable for solar water heater of cap 100 LPD. Make : TATA/ Supreme solar.

M&L for replacement of solar hot water tank with thermal insulation suitable for solar water heater of cap 200 LPD. Make : TATA/ Suprem solar.

M&L for replacement of solar hot water tank with thermal insulation suitable for solar water heater of cap 300 LPD. Make : TATA/ Suprem solar.

M&L for replacement of hot water pipe insulation with glass wool and aluminium cladding 20 mm bore including all material as required and directed by EIC.

S&F in replacement sheet metal enclosure for MCB, DB, SPN, 240 Volts, 2 way, single door without bus bar, enclosure made up of CRCA sheet steel RAL 9003 powder coated, IP 30 including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed. Make- Legrand/ Seimens/ Schinder.

Repair & comprehensive maintenance of DG sets of any make of the following capacities which include replacement of worn out spares such as fuel filter, oil filter, lubricating oil hoses, V- belt, Oil pipes, fuel pipe, water pump, cut out and tightening of nut bolts, washers etc of DG sets complete all as specified and directed.

750 KVA capacity

100/110/160 KVA capacity

30 / 50/ 62.5 KVA capacity

Periodical maintenance of DG set 750 KVA by authorised representative of manufacturer (OEM) by "B" check of Engines complete all as specified and directed.

Periodical maintenance of DG set 750 KVA by authorised representative of manufacturer (OEM) by "C" check of Engines complete all as specified and directed.

Periodical maintenance of DG set 750 KVA by authorised representative of manufacturer (OEM) by "D" check of Engines complete all as specified and directed.

Periodical maintenance of DG set 100/110/160 KVA by authorised representative of manufacturer (OEM) by "B" check of Engines complete all as specified and directed.

Periodical maintenance of DG set 100/110/160 KVA by authorised representative of manufacturer (OEM) by "C" check of Engines complete all as specified and directed.

Periodical maintenance of DG set 100/110/160 KVA by authorised representative of manufacturer (OEM) by "D" check of Engines complete all as specified and directed.

Periodical maintenance of DG set 30/50/62.5 KVA by authorised representative of manufacturer (OEM) by "B" check of Engines complete all as specified and directed.

Periodical maintenance of DG set 30/50/62.5 KVA by authorised representative of manufacturer (OEM) by "C" check of Engines complete all as specified and directed.

Replacement of the following spare parts for 30 to 160 KVA of Make:- Kirloskar / Greaves Crompton / Cummins / Mahendra complete all as specified and directed:-

Head Gasket Kit complete

Fuel Filter

Lubricating Oil Filter

Hose Pipe Set

Replacement of the following spare parts for 750 KVA of Make:- Kirloskar / Greaves Crompton / Cummins / Mahendra complete all as specified and directed:-

Head Gasket Kit complete

Fuel Filter

Lubricating Oil Filter

Hose Pipe Set

Dismantling and taking down radiator assy from engine of any capacity for repairs including descaling, bracing as necessitated to plug leakages, M & L for transporting of the radiator of capacity 30-750 KVA and repair/maintenance to the radiator fins with the help of cleaning coil solution and cleaning the radiator complete and repair to the leakage places by means of gas welding and including initial filling up coolant and re-fixing after repairs including replacement of worn out nut bolts, washers, etc; and testing complete all as specified and directed.

Dismantling and removing fuel injection pump from DG set for repairs including re-calibration at authorised service centres, replacement of necessary spare parts such as delivery valves, plunger, 'O' ring, springs etc and refixing, testing complete all as specified and directed of the following capacity:-

750 KVA capacity

100/110/160 KVA capacity

30 to 62.5 KVA capacity

M & L for cleaning of fuel tank of DG sets of any make and capacity including replacement of fuel level indicating tube and markings complete all as specified and directed.

Replacement of Lubrication Oil 20 W 40 complete all as specified and directed. Make :- Castrol / Servo

M&L for reconditioning of unserviceable battery 12 V, 180 AH by replacing complete cells, PVC seperators, electrolyte, terminals and final sealing, recharging and testing complete all as specified and directed.

M&L in replacement maintenance free lead acid battery 12 volt, 180 Ah with minium 24 months warranty) of stand alone solar LED light complete all as specified and directed. [MAKE:- EXIDE / TATA / AMERON]

Replecement of flame proof asbestos rope of specified dia wrapped around the exhaust pipe complete all as specified and directed.

Repair / Overhauling of self starter 12 / 24 Volt of any make / capacity including replacement of minor items such as carbon brushes, nuts, bolts etc; all as necessitated complete all as specified and directed. Note:- All additional spares as required will be measured and paid seperately.

Replacement of following spares for self starter 12 / 24 V complete all as specified and directed :-

Field coil

Armature

Clutch assembly

Replacement of battery lead, copper conductor 25 Sq mm, multi stranded, PVC insulated with suitable terminals at both ends complete all as specified and directed.

M&L for painting of DG set of 30 to 160 KVA capacity with two coats of spray painting with synthetic enamel paint as per colour code after preparation of old painted surfaces and writing SM / MES Nos etc; complete all as specified and directed.

Replacement of battery terminal of brass suitable for 12V, 180 AH battery complete all as specified and directed.

Replacement of Fan belts as per sample for DG sets of capacity:-

750 KVA capacity

160 KVA capacity

100 KVA capacity

30 to 62.5 KVA capacity

Replacement of fuel flexible pipe, heavy duty with check nuts for DG sets of any make/capacity complete all as specified and directed.

Dismantling of alternator assy 30 to 750 KVA DG Set and taking out regulating transformer carefully and rewinding of regulating transformer including refitting and testing complete all as specified and directed.

Replacement of only oil pressure gauge as per sample complete all as specified and directed.

Replacement of only temperature gauge as per sample complete all as specified and directed.

Replacement of only water pump suitable for DG sets of following capacity:-

750KVA capacity

30 to 160 KVA capacity

Replacement of Control Safety (Lub oil) for 30 to 750 KVA DG Set complete all as specified and directed.

Replacement of Control Safety (Water) Part No. for 30 to 750 KVA DG set complete all as specified and directed.

Replacement of S.D. Valve for 30 to 750 KVA DG set complete all as specified and directed.

Replacement of Electronic AVR assembly Complete make : Kirloskar for 750 KVA DG Set complete all as specified and directed.

Replacement of Electronic AVR assembly Complete make : Kirloskar for 100/110/160/750 KVA DG Set complete all as specified and directed.

Replacement of Electronic AVR assembly complete for 30/50/62.5 KVA DG Set complete all as specified and directed.

Replacement of Fan Blade for 100/110/160/750 KVA DG set as per sample complete all as specified and directed.

Replacement of Fan Blade for 30/50/62.5 KVA DG set as per sample complete all as specified and directed.

Replacement of Oil Coolent additive concentrate pack of 10 Ltr suitable for DG Set complete all as specified and directed.

Supply only Distilled water in 5 ltr PVC Container complete all as specified and directed.

Replacement of air filter outer & inner element for 30/62.5/100/110/160/750 KVA D G set as per sample complete all as specified and directed.

Replacement of wiring loom complete all as specified and directed.

Taking out unserviceable alternator from 30/50/62.5 KVA DG set and removing starter and rotor, removing old burnt out winding wire and rewinding the stator of suitable size with super enameled copper wire and insulating materials complete including re-assembling the complete alternator, fixing in position and testing on load complete including replacement of bearing of suitable size – 01 Set complete all as specified and directed.

Taking out unserviceable alternator from 100/110/160/750 KVA DG set and removing starter and rotor, removing old burnt out winding wire and rewinding the stator of suitable size with super enameled copper wire and insulating materials complete including re-assembling the complete alternator, fixing in position and testing on load complete including replacement of bearing of suitable size – 01 Set complete all as specified and directed.

S&F in replacement On load changeover switches, 4 pole, 200 Amp manual changeover in open execution complete all as specified and directed. Make - L&T (Cat No.CO22000OOOA) or equivalent in Havells/C&S as approved by GE.

Supply & Fix in repair Front Mounting add- on aux. Contact Block model - Code -13 100-250V or as per site reqt AF265-40 (1SFC101066M0201), AC 415 V ,50 Hz , 3 phase, 4 pole for contractor of LT panel of AC plant. Make-L&T/Siemens/ABB,

S&F in replacement On load changeover switches, 4 pole, 100 Amp manual changeover in open execution complete all as specified and directed. Make - L&T (Cat No.CO11000OOOO) or equivalent in Havells/C&S as approved by GE.

MAINT OF FIRE ALARM SYSTEM

S&F in replacement microprocessor based main control panel of 10 zones having provision of indicator for fire alarm, fire, fault,open/short earth circuit complete. Make : SAFE ZONE/APOLLO or equivallent by OEM

S&F in replacement Zonal Indicator panel for fire alarm system zonal panel of upto 6 zone having provision for indicator fire,fault, open/short earth circuit dulyinterfaced with main control pnel complete Modle SD-1165. Make : Safezone/Apollo

S&F in replacement Repeater Panel for fire alarm system repeator panel of mann control panel hving provision of Audio Video indicators for fire, faukt, oen/short circuit duly interfaced with main control panel complete. Make : Safezone/Apollo

S&F in replacement Multi criteria heat cum smoke detector complete. Make : Apollo

S&F in replacement Response indicator for fire alarm system made of 1.6mm thick CRCA sheet having dual Red LED indicator complete. Make : Safezone.

S&F in replacement Siren for fire alarm system complete. Make : Safezone.

S&F in replacement medium intensity hooter for fire alarm system complete. Make : Safezone.

S&F in replacement manual call points suitable for addressable system duly painted in red colour paint with front glass to be broken in case of fire) complete with test key to check the response with out breaking the glass and die cast aluminium housing with IFD indicator all as specified. Make : APOLLO

S&F in replacement copper conductor multi stranded armoured cable fixed on wall/ceiling with proper saddles/spacers of size 2 Core 1.5 Sqmm complete. Make : CCI/SUNLIGHT

S&F in replacement Zone cards, Make : HITESH/GURUTRONIC

S&F in replacement pillbox complete, Make : MATHS/GURUTRONIC

Deduct schedule of credit (calculation will be done off line) Rs. 229398.00

Neelam Traders

UMESH ENTERPRISES