REPAIR/ REPLACEMENT TO STREET LIGHTS AND MAINTENANCE OF CONTROL PANELS ALONGWITH OTHER MISC ITEM AT 25ED AF STN DEOLALI

Amount

Disconnecting/ Isolating electric supply from the source at electric pole / on walls/ tower and taking down carefully for repairs the existing unserviceable street/ security light/ flood/garden light/gate light fittings of any make/ type/ wattage at and repairs at shop by checking and making the fittings serviceable at any timeper day round the clock by detailing two skilled trademan equiped with required T&P, replacing the damaged/ unserveciable parts with new parts as required and supplied, under relevant items no 2 to 9 at the supply only rates subsequently followed as mentioned here in under, by the contractor for replacement to suit the existing parts and fittings fixing only LED Street light, Perimeter Light & Post top lamp Qty 250 will be issue by department under schedule ‘B’ free for fixing ( fixing charges for replacement shall be deemed included in the quoted rates against serial item No. 1) complete refixing at existing locations or as directed by Engg. in charge, connecting with source and testing for proper functioning of the fittings complete as directed. Note :- T & P required for repair/ replacing street light, perimeter light and post top lamp shall be provided by contractor without any extra cost. Any casualty or injury sustained by the contractor’s workers during the working hours shall be sole responsibility of the contractor. No claim on this account shall be entertained by the department, if during the maintenance there is any kind/nature of fault occurred along the perimeter and street light and auxiliary items/cable it is to be completely trace out by contractor & their redressal/fault rectification to be carried out within 24 hours and balancing elect load RYB phase complete all as specified and directed by Engr-in-Charge.

Supply only LED outdoor drivers up to 48W of suitable for LED fittngs as per existing.

Supply only LED outdoor drivers up to 60 W of suitable for LED fittngs as per existing.

Supply only LED outdoor drivers up to 70 to 90 W of suitable for LED fittngs as per existing.

Supply only LED lamp 10 watt normal holder type (Regular Retro fit )

Supply only LED lamp 5 watt normal holder type

Supply only LED lamp 7 watt normal holder type

Supply only LED lamp 15 watts normal holder type

S&F in repairs street light brackets with 40 mm dia GI tubing light grade, 1.5 metre length, bend to shape required including fixing with suitable MS clamps made out of MS flat 40x3 mm, nuts, blots, washers etc. and fitted on HT/LT poles/walls all as directed.

S&F in repairs/replacement factory fabricated street light double arm brackets with 40 mm dia GI tubing light grade, 1.5 metre cantiliver arm length of each arm oriented at 45 degrees ,totaly fabricated out of pipe bend to shape in such way that its round centre will be fitted into pole top required dia including fixing with suitable MS clamps made out of MS flat 40x3 mm, nuts, bolts, washers etc. and fitted on HT/LT poles/walls all as directed.Make: Calcutta pole/Bombay tubing/Singh Profile

S&F in repairs street light brackets with 25 mm dia GI tubing light grade, 1.5 metre length, bend to shape required including fixing with suitable MS clamps made out of MS flat 40x3 mm, nuts, blots, washers etc. and fitted on HT/LT poles/walls all as directed.

M&L Cutting of branches of trees having girth exceeding 1 mtr but not exceeding 2 mtr including disposal of unserviceable material to a distance 100 mtr for removing/ cleaning over head ACSR conductor around 3 mtrs all as directed by the Engineer in charge. Note (a) Each Span avergae length 25 to 35 mtrs (b) T & P Blades/saw and safety equipment required for cutting branches shall be provided by contractor without any extra cost

Supply and fix in repair/replacement LED street light fittings 60 watt with minimum110 lumen/ watt system lumen output .The luminaire should have cool white coloure temperature with minimum 5700 K. The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, lumen efficiency of 120 lumen /W, isolated electronic LED driver ( SMPS based constant current supply), IK-07, life class of 50,000 hrs @ L 70, surge voltage protection not less than 10 KV . Make Crompton CAT No CRP-409-60-57-SL-GL-NSG or equivalent in Havells/ Phillips.complete all as specified and directed by Engineer- in-charge.

Supply and fix in repair/replacement LED street light fittings 70 watt with minimum110 lumen/ watt system lumen output .The luminaire should have cool white coloure temperature with minimum 5700 K. The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, lumen efficiency of 120 lumen /W, isolated electronic LED driver ( SMPS based constant current supply), IK-07, life class of 50,000 hrs @ L 70, surge voltage protection not less than 10 KV with 5 Year manufacturer warranty. Make Crompton CAT No CRP-409-70-57-SL-GL-NSG or equivalent in Havells/ Phillips/Bajaj.Complete all as specified and directed by Engineer- in-charge..

All as per Item No 13 but of LED street light fittings 90 watt with pressure die cast housing, all as directed. make: Cromptan cat Ref CRP-411-90-57-SL-GL-NSG or equivalent in Bajaj/ Havells

All as per Item No 13 but of LED street light fittings 100 watt with pressure die cast housing, all as directed. make: Cromptan cat Ref CFS-504-100-57-60D-SL-GL-NSG or equivalent in Bajaj/ Havells

S & F in repair/replacement PVC Insulated and weather proof three core multistrand copper conductor cable 1.5 sqmm, size as required length for replacing US cable for styreet light where ever found US from junction box to street light all as directed by Engr-In-Charge. Make Havells, polycab, Gloster and plaza

S&F in repairs post top lantern decorative HERITAGE LED light fittings 1x20 watt retro LED with opel deffuser including LED 15W including its pedestal duly fixed in the PCC, IP 65 protection fixed on existing/new GI pipe braket and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed. make: Crompton cat part LPTH-20-CDL eqvlt to Bajaj, Havells, wipro as approved by GE complete all as directed by Engg. in charge.

S&F in repairs flood light fittings 150 watt LED with min 110 lm/watt system luman output. The Lumanaire shall have cool white colour temp with 5700 K, pressure die cast aliminium epoxy powder coated with weather proof gasket for LED and control gear compartment with IP 66 Protection, 10 KV external SPD with high power LED and acessories fixed on existing/new GI pipe braket fixed on HT/LT poles and connection with PVC aluminium 1.5 sqmm 3 core cable etc complete all as directed.Make Crompton CAT No LFLN-150-CDL/60-M-HPM or equivalent in Havells/ Philips.complete all as specified and directed by Engineer- in-charge.

All as per Item No 19 above but 120 watt LED with min 110 lm/watt system luman output. complete all as directed. make: As per Crompton Cat Ref: CFS-504-120-57-60D-HL2-GL-NSG (120 lm/w 10KV SPD ) with 5 Year warranty or equivalent in Havells/phillips.

Supply & fix in repair/replacement of decorative LIARA LED Bollard IP65 rated Inverted Pyramid Tripod type LED Bollard with soft 360º light distribution Crompton Cat pt LBLSN-10-CDL or as require site ,complete all as specified & as directed by Eng-In-Charge.

Supply & Fix in repair 30W LED Post Top Gate Light Kelvin Aluminum housing, clear acrylic diffuser, cast aluminum pole-cap complete with accessories with 3 M Length pole OD of ø75 mm pipe for fixing Cat part No SZPGKMX030 of Make Shakti or Equivalent in crompton/Havells ,complete all as specified & as directed by Eng-In-Charge.

Supply & Fix in repair Smart Integrated ALL-IN-ONE Solar Street Light with built in Mono Crystalline Panel, Lithium Ferro Phospate (LiFeP0 4) Battery, MPPT Charge Controller and PIR Sensor with Colour Temperature 6000-6500K. 2 days autonomy with dimming profile complete all as specified Bajaj BSZSL 30W equivalent incrompton/ Havells,

S & F in repair /replacement PVC perplex cover globe type with base plate/holder not less than 8 inches dia suitable for post top latern including one Nos 7/9 watt LED lamp complete all as specified and directed by Engr-In-Charge make Bajaj/Sutya/havells

Taking down unserviceable main switch supply install, testing commissioning sheet metal box of size 60x45x20 cm made out of 1.6mm thick CRCA sheet powder coated for fixing street light timer switch, frame pole mounted type with following accessories and connecting cable with proper lugs, glands etc.(a) Digital Timer switch AlphaRex D22, 2 channels Legrand cat No. 412641(b) 25 Amps, 4 pole/230 volt power contactor Cat No 4125 51or equivalent in Secure, Rishabh, L&T as approved by GE) all as specified and directed.

M&L for jointing & testing heat shrinkable cable joint kit , straight through , out door type for 1100 volts LT XLPE/PVC insulated cable of aluminium conductor up to 50sqmm 3-1/2 core cable including necessary jointing work all as specified & directed

M&L for jointing & testing heat shrinkable cable joint kit , end termination , out door type for 1100 volts LT XLPE/PVC insulated cable of aluminium conductor 50 sqmm to 70 sqmm 3-1/2 core cable including necessary jointing work all as specified & directed

Restringing of existing LT overhead line of copper/ACSR conductor after opening of binding wire from insulator and bringing the sag within limit rebinding the same with insulator with 16 SWG aluminium wire/suitable copper wire all including renewal of jumpers by providing heavy duty alkathine pipe of approved quality, reconnecting the service connections after cleaning the carbon and foreign material complete all as directed.

Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out in soft soil.

Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out in hard soil.

Returning Filling in including spreading, leveling, watering & well ramming in layers n. exc 25 Cm.

Removing excavated/Surplus soil n exc 50 Mtr & depositing where directed at a level n. exc 1.5 Mtr above the starting point.

M&L for double wall corrugated (DWC) duct (dure guard) as per IS 14930 part II LT UG cable protection including coupler, elbows, T joiints, Bends etc. and test report Make: Dura line/ Gemini/ Rex of size 38mm inner dia and 63 mm outer dia al as per direted by Engr in charge.

Supply and laying in repairs/replacement LT XLPE insulated/PVC heavy duty armoured cablle 1100 volts grade UG multi-stranded aluminium conductor electric cable cross sectional area 25 Sqmm 4/3.5 Core including necessary connection with provision of lugs & cable gland fixing arrangements all as specified and directed.

All as per item No above 34 but LT XLPE cross sectional area 16 Sqmm 4 Core all as specified and directed.

All as per item No above 34 LT XLPE , cross sectional area 35 Sqmm 3.5 Core including all as specified and directed.

All as per item No above 34 LT XLPE cross sectional area 10 Sqmm 2.0 Core including all as specified and directed.

All as per item No above 34 LT XLPE cross sectional area 10 Sqmm 4.0 Core including all as specified and directed.

S&F in repair for cable joint termination box PVC body 230X185X110mm outer dimensions housing suitable for housing and including 100 amps rated aluminium bus bar,suitable MCB SP, 3 phase, 4 wire system mounted on PVC insulators for one incomming and two out going cable entry space mounted on street light PCC/ tublar pole with 25x3 mm GI clamps with GI nut, bolts washers ,thimble etc & Make: Sintex /C&S/National& double compression gland of Make : Dovel or comet, complete all as specified and directed by Engineer-in-Charge.

M&L for Cable route indicator fabricated from 40x40x6mm angle iron 450mm long, rivited or welded with 100mm dia CI or MS round disc duly engraved " LT cable" in letters including grouted in ground with PCC 1:4:8 type D-2 compete all as specified and directed by Eng in Charge

M & L for cement concrete (1:3:6 ) type C-1 using 20 mm graded stone aggregate, including weathering, slightly rounded Chamfered angles and throating including for erthing pit, errection of GI tube light grade as in foundation in any size necessary form work all as directed .

M&L for checking of serviceability of existing street/security/gatelight fittings in whole 25 ED area for 03 times for a week evening time 6.30 pm to 9 .00 Pm with duty Elect or night patrolling with of guard room for light check. including submitting serviceability report to office in proper fomat using necessary man power, T&P and including transportation facility all as directed by Engr in charge

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 100 mm dia suitable for 0.4 mpa working pressure.

Taking down solar street light from pole and repair/ servicing of check mono crystaline panel/ lithium ferro phospate (LifeP0 4) , replace battery, MPPT charge controller and PIR sensor with colour complete refixing at existing locations or as directed by Eng. in charge, connecting with source and testing for proper functioning of the solar fittings complete as directed. Note : Rate are included require material for solar light serviceable

Supply & fix in repair/replacement LED Flood Light 100W RGB & Coloured (Red / Green / Amber / Blue / Yellow), LED flood light with cast aluminum housing, toughened glass cover, high efficient LED, IP65/66, 10KV SPD with controller and SMPS, and wired with all accessories cat part No SZCFLMX100-RGB of Make Shakti or Equivalent in crompton/Havells

Supply and fix factory-made digital Timer switch with contactor panel for street light 32A to 63 Amp to accommodate 3 pole 4 wire system complete serviceable of timer panel complete , Make- Indo asian Cat No :TL 032DB0 or equivalent of Havells/ L&T,complete all as specified & as directed by Eng-In-Charge.

M&L for removal of green vegetation from surrounding of street Light or perimeter pole area (3 Mtr radius x 9 height Mtr) etc marking elecptical shape on the steel tubular/PCC pole in black colour and marking the pole number using suitable tensils with synthetic enamel paint in white colour in the suitable and readable size font including depositing the vegetation away from the places complete all as directed

SONA LAKSHMI ASSOCIATE (BID ID -3300735)

LOKMANYA ENTERPRISES (BID ID -3298969)