Construction of Sri Kalyan Singh Chowk and Road safety work at Mujariya Chauraha Under Road Safety Work

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Superintending Engineer Budaun-Pilibhit Circle PWD Bareilly

Name of Work:- eqtfj;k pkSjkgs ij Lo0 Jh dY;k.k flag ckcwth pkSd dk fuekZ.k dk;Z RkFkk lM+d lqj{kk lEcU/kh dk;Z

Contract No: - 7841(2) /Nivida(CD)(E.T.)/2025-26 Dt. 27-10-2025

Sl. No. Item Description (Excluding G.S.T.) Item Code / Make Quantity Units Estimated Rate UNIT Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m 843.5 Cum 60 Excess(+) Full Conversion INR 1 Construction of chamber for 100mm sluices valve item1 10 1 Nos

2 Construction of granular sub-base Grading 1 by providing close graded Material Lalkuan Quarry, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, as per section 400 of MORTH specifications complete in all respects 405.5 Cum 4400 Excess(+) Full Conversion INR

3 Providing, laying, spreading and compacting graded stone aggregate Lalkuan Quarry to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. As per MORTH Specification Clause 406 (4.14). 305.5 Cum 4700 Excess(+) Full Conversion INR

4 Providing and applying primer coat with SS2 grade emulsion (HINCOL) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. As per MORTH Specification Clause 502 (5.1) 1496 Sqm 38 Excess(+) Full Conversion INR

5 Providing and laying dense graded bituminous macadam Grading 1 with 80 - 100 TPH capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-40 (IOC/HPCL) @ 4.0 per cent, mini., by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification section 500 complete in all respects. 119.5 Cum 10600 Excess(+) Full Conversion INR

6 Providing and applying tack coat with VG-10 (IOC/HPCL) using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom as per MORTH Specifications section 500 / relevant IRC codes complete in all respects. 11233 Sqm 11.2 Excess(+) Full Conversion INR

7 Providing and laying bituminous concrete Grading 2 with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 (IOC/HPCL) @ 5.4 per cent, mini., of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specifications 500 complete in all respects. 449 Cum 11500 Excess(+) Full Conversion INR

8 Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 of MORTH specifications, as per MORTH Specifications section 300 complete in all respects. 592 Cum 120 Excess(+) Full Conversion INR

9 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved materialas per MORTH Specification section 200, 300 complete in all respects. 648 Cum 60 Excess(+) Full Conversion INR

10 PCC Grade M15 Using Batching Plant complete in all respects as per MORTH specifications Section 1700, 1000, 2100, 2200, 2300 72 Cum 7450 Excess(+) Full Conversion INR

11 RCC Grade M25 Using Batching Plant transit mixer & concrete pump as per MORTH specifications 1500, 1700 & 2100 SI.No. 12.8 388.8 Cum 8200 Excess(+) Full Conversion INR

12 Supplying, Fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications MORT&H Specificatin 1600, 2200 SI. No. 13.6 30.52 M.T. 70500 Excess(+) Full Conversion INR

13 Providing and Laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms per sqmtr area thicness of 2.5.. In exclusive of surface applied glass beads as per IRC:35. The finish surface to be level, Uniform and free from streaks and holes. As per SOR Lucknow Chp. 26 SN 2 (Morth 803 (8.13) 1143 Sqm 600 Excess(+) Full Conversion INR

14 Providing and Laying of hot applied thermoplastic compound 15mm thick for repeated bar marking including reflectorising glass beads @500gms per sqmtr area thicness of 5 mm is exclusive of surface applied glass beads as per IRC:35. The finish surface to be level, Uniform and free from streaks and holes. As per SOR Lucknow Chp. 26 SN 2 (Morth 803 (8.13) 537.3 sqm. 800 Excess(+) Full Conversion INR

15 Reflective raised pavement marker providing and Fixing of raised pavement marker (cat eye) type x-ASTMD -4956-04 avery dennision /3M (USA MAKE)having Moulded body of polycarbonate,ASA HIPS or ABS able to support a load of 13.635 MT tested in accordance with ASTMD 4280 type H and other requirements mentioned in MORT& H circular its reflective lens made of micro prismetic lens(capable of providing total internal reflection of light),electronically welded to the body the length , height and width of the body shall not exceed 130 mm, 20 mm and 105mm respectively, the area of each reflected surfaceshall not be less than 13 sqcm on each side stopping at the angle of 35+/-5 degree to the base to ensure maximum reflectively , it shall comply to specification of catagory A MORTH circular No. RW/NH/33023/10-97-DO III dt. 11.06.1997.lenses shall be moulded of methyl methecrylate confirming to ASTMD 788 or equvalent with 7 years warranty, (Sor 2018 Chapter 27 S no. 8 New Item Meerut ) 1650 Nos 320 Excess(+) Full Conversion INR

16 Providing and fixing of 60 cm circular speed limit/GO slow board retro-reflectrorised sign as per IRC 67 mad of high intensity grade sheeting vide clause 810.3, fixed cover aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75x75x6 mm firmly fixed to the ground by means of properly design foundation with M-15 grade cement concrete 45x45x60 cm, 60 cm below ground level as per approved drawing (as per IRC 67-2012 clause 14.60) 10 Nos 3800 Excess(+) Full Conversion INR

17 Providing and fixing of 30x90 cm Rectangular Hazard markers, retro-feflectorised ign as per IRC 67 mad of high intensity grade sheeting vide clause 810.3, fixed cover aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75x75x6 mm firmly fixed to the ground by means of properly design foundation with M-15 grade cement concrete 45x45x60 cm, 60 cm below ground level as per approved drawing (as per IRC 67-2012 clause 14.60) 8 Nos 3300 Excess(+) Full Conversion INR

18 Supply of informatory sign board made of 18 gauge M.S. Sheet and angle iron size 40x40x5 mm two post of angle frame 3M. Long duly framed bottom portion around also welded with angle with edge of the sign board etc. Bottom two cross of flat iron Size 32x5 mm as per approved sample and design at PWD Store Budaun. Size of board 0.90 Sqm 12 Nos 6300 Excess(+) Full Conversion INR

19 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67- 2012 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting type- IV 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to the ground by means of properly dsignd foundation with M-15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. the retro reflective sheeting shall be tested for three year out door weathering test in Indian condition as per IRC 67-2012 and proof of the same in form of Govt. report shal be uploaded while quoting tender. (i- 90 cm equilateral triangle with diffinitation plate size (20cm.x60 cm.) 12 Nos 4000 Excess(+) Full Conversion INR

20 Providing and fixing of Solar Blinkars on T Junction and Inter Sections points of safety of Road users as per latest specificateion and as per direction of Engineer in charge. 8 Nos 25000 Excess(+) Full Conversion INR

21 For median RCC Grade M25 Using Batching Plant transit mixer & concrete pump as per MORTH specifications 1500, 1700 & 2100 SI.No. 12.8 60 Cum 8500 Excess(+) Full Conversion INR

22 Supplying, Fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications MORT&H Specificatin 1600, 2200 SI. No. 13.6 48 Qtl 7050 Excess(+) Full Conversion INR

23 Painting first coat over priming coat(but including cost of priming coat) on wood or steel snd other metal surface with superior synthetic enamel standard make brushing to give an even shade and finish and includjng cleaning the surface of all dirt dust and other foreign matter sand papering and stripping including cost of all materials ,labour ,T&P etc required for the proper complrtion of the work 432 Sqm 50 Excess(+) Full Conversion INR

24 Cast in Situ Cement Concrete M20 Kerb Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade on M-15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409 2400 Cum 700 Excess(+) Full Conversion INR

25 Construction of granular sub-base Grading 1 by providing close graded Material Lalkuan Quarry, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, as per section 400 of MORTH specifications complete in all respects. 312 Cum 4400 Excess(+) Full Conversion INR

26 Providing and laying of factory made 80 mm thick rubber moulded Interlocking cement concrete tiles (300mpa) including 25 mm thick compacted bed of fine sand comacting and proper embedding@ laying of interlocking tiles, laveling and dressing of surface to required level and slope, filling joints with local sand including the cost of material,labour T&P etc.required for proper completion of work as directed by Engineer-in-Charge. (s.I. No0 New Item -1) Ch. 20 1800 Cum 800 Excess(+) Full Conversion INR

27 Supply and laying of 100 mm dia PVC Pipe. Ch-1, SI.No. 23 1350 R.M. 135 Excess(+) Full Conversion INR

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words