Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹24.2 LAccepted-AOC PATIALA | PATIALA | L-1 | Accepted-AOC being L-1 bidder and 0.303 percent below | |
| 2 | L-2₹24.2 L+₹2,419 (0.10%)Rejected-Finance 137 2 OLD LAL BAGH NEAR PRIMARY VICTORIA SCHOOL PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | L-2 | Rejected-Finance Rejected being L-2 bidder and 0.204 percent below | |
| 3 | L-3₹24.2 L+₹4,838 (0.20%)Rejected-Finance | L-3 | Rejected-Finance Rejected being L-3 bidder and 0.104 percent | |
| 4 | Not Admitted-PreQual/Technical | - | Not Admitted-PreQual/Technical Others-Technical bids of only 3 no. eligible L & C Societies were opened on dtd 26.08.2022 |
Tender Value
₹24.2 L
EMD Value
₹48,500
Closing Date
25 Aug 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sr.XEN CIVIL WORKS DIVISION, PSTCL, PATIALA
Sr.XEN CIVIL WORKS DIVISION, PSTCL PATIALA
Work of extension of Control Room and alteration in Switch House Building at 220 KV S/S Nabha.
2022_POWER_88294_1
22/2022-23
Open Tender
Civil Works
Tender cum Auction
225 days
NABHA
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹48,500
Yes
23 Dec 2022
2 Aug 2022
26 Aug 2022
2 Aug 2022
25 Aug 2022
2 Aug 2022
Amount
Earth work in excavation in foundations, trenches etc in all kinds of soil where pick jumper work is not involved & not exceeding2.00 mtr depth i/c dressing of bottom & sides stacking the excavated soil clear from the edge.
Dismantling of brick work in cement sand mortar / lime mortar including T&P scaffolding herever necessary, sorting the dismantled terial,disposal of unserviceable material. & staking theserviceable material with all lifts & lead of 100 metre (By Mechanical Means).
Scraping-Bricks dismantled from brick work in lime or cement.
Shuttering for faces of concrete foundations and foundation beam & plinth beam
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
Centring & shuttering for flat surfaces such as suspended floors, roofs landings etc.
Cement concrete 1:8:16 with 40mm gauge stone aggregate.
Cement Concrete 1:6:12 with 40mm gauge stone aggregate.
Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type
Reinforced cement concrete M-20 machanically batch mixed using batch type mixer as per IS1791 and vibrated by needle vibrator but excluding steel reinforcement, centring and shuttering in foundation and plinth.
Reinforced cement concrete M-20 mechnically batch mixed using batch type concrete mixture as per IS 1791 and vibrated by needle vibrator but execulding steel reinforcement centring and shuttering in super structure.
DPC 7.5 Cm thick of CC 1:2:4 with 2- coats of bitumen 20/30 penetration @1.65 kg/sqmtr laid hot & sanded.
First class burnt brick work laid in cement sandmortar 1:6 in foundation and plinth
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth
First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth.
Ist class burnt brick work laid in cement sand mortar 1:4 in 1st storey up to 4.00 mtr above plinth level.
Extra for brick work done above 4.00 mtrs for every adition al ht of 2.00 mtrs. (Parapet )
Terracing consisting of tiles 22.86x11.43x3.83 cm laid over 25mm mud plaster 7.5cm mud filling on another level of 25 mm mud plaster i/c 2-coats of bitumen laid hot @ 1.65 kg/sqmtr on top of RCC slab i/c grouting with cement sand mortar 1:4 & top surface to be left clean after wire brushiing.
Bottom Khura on ground 1.2m x 0.6m consisting of brick on edge in cement mortar 1:3 over 75 mm CC of 1:8:16 i/c 12.5 mm thk Cement plaster 1:3.
CC gola 1:2:4 10 cm x 10 cm concave quardant along junction of roof with parapet finished smooth
Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. Hanger complete as per drawings,specifications and tothe entire satisfaction of engineer-in- charge.
P&F110 mm dia SWR UPVC bend for rain water pipe as per IS:14735.
Providing and fixing 110 mm dia . U.P.V.C Rainwater pipe of 2.5 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item).
Providing and fixing mineral fibre false ceiling tiles ( NRC 0.55 to 0.6) at all heights of size 595X595x16 mm of approved texture, design and pattern.
Base course of floor consisting of 100 mm thick CC 1:8:16 & 100 mm sand filling.
Conglomerate floor 40 mm thick cement concrete topping 1:2:4.
Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
Flat brick or tile flooring laid in cement sand mortar 1:4 on 100mm thick cement concrete 1:8:16 and 100mm thick sand filling and cement pointed 1:2 on top.
Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigmentetc., completewhite cement slurry in joints including corners angles and beading.
Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ) Size 600x600 mm
roviding and fixing 1st quality ceramic glazed wall tiles Matt/Semi att/Glosy/Highly Gloss inish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
12.5 mm thick cement plaster 1:4
12.5 mm thick cement plaster 1:5
12.5 mm thick cement plaster 1:6
20mm thick cement plaster 1:5 in two coat work
20mm thick cement plaster 1:6 in two coats work
Bearing Plaster of 10 mm thick cement mortar 1:3 cement sand finished with a floating coat of neat cement and thick coat of Lime wash / P.O.P. on top of walls when dry for bearing of R.C.C. slabs & beams.
Finishing walls with acrylic smooth exterior paint of required shade with 2-coats applied @ 1.67 ltr/10 sqmtr over & incluiding base coat of water proofing cement paint applied @ 2.20 Kg / 10 sqm.
Wall painting with Plastic emulsion paint of approved brand in two coats
Preparation of plastred surface or concrete surface for painting PE (incluiding sand papering the surface ) using ready mixed cement based wall putty by applying 2-coats to get required finish.
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)
For shutter area above 0.50 sqm
For shutter area above 0.50 sqm
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. CompleteI.S.I Designation No. III (size of door 851mm to 1000mm)
Providing and fixing aluminium work for doors,windows, ventilators & built up standard tubular sections & other sections 733 & IS 1285 of Jindal / equivalent make approved ny engg incharge fixed with rawl plugs & screws with fixing clips or with expansion hold fastners i/c necesasry fitting up to gap at junctions, top, bottom a7 sides reqiored PVC plugs Aluminiumsections shall be smooth rusat free straight & jointed mechanically complete as per architectural drawings & the directions of engineer incharge.
Fixed portion for chowkats
Shutters of doors / windows/ cup Boards
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side.
P&F glazing in aluminium doors windows ventilators shutters & partitions as per architectural drawings and the directions of engineer incharge -Float glass panes of 5 mm thickness
Steel reinforcement for RCC work where not included in the complete rate of RCCincluding bending, binding and placing in position complete:- Up to 20mm dia bars.
Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects.
Sanitary Items
Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.-15mm i/d
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.-20mm i/d G.I. Union
Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.-20mm i/d Gun Metal peet valve heavy pattern.
25 mm i/d Gun Metal peet valve heavy pattern.
Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects.- 110mm o/d pipe
Providing and fixing RCC manhole covers only-500mm i/d RCC man hole cover only as per ISI heavy duty
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.-Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.
Extra for providing and fixing C.P. Brass long flush bend 32mm instead of PVC long bend.
Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect.
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect.-Size 550 mm x 400 mm x 815 mm
Providing and fixing in position C.P. brass bottle trap 32mm dia with 40 mm seal of approved make (to the approval of Engineerin- charge) complete in all respect.
Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect.-Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.-C.P. brass towel Rails size 15mm dia 610mm long
Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineerin- charge ) fixed in with rawl plugs and C.P brass screws complete in all respect.-CP brass Acrylic Shelf size 560mmx130mm
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)-Size 600mmx450mm
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.
Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.-C.P.brass 15mm stop cock Male and female end
Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.-PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut
Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.90mm o/d single socket SWR UPVC pipe lines laid complete
Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge )-90mm o/d
Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc.-With 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg)
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.-Size 75 mm x 75 mm
Providing and fixing in position automatic brass Ball Cock in tanks.-20mm i/d
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Gratin 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.-100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
Electrical installations
RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES:-Wiring in PVC insulated copper conductorsingle core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-
Wiring fan point without fan box in PVC insulated copper conductor single core cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (socket size).
Wiring fan point with sheet metal fan box (shape hexagonal & sheet thickness not less than 1.60 mm) in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts (socket size).
Wiring light point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100 volts grade.
Wiring 3 Pin 6 Amp. Plug control comprising wall socket and switch including bonding to existing earth with PVC insulated copper conductor single core cable (ISI marked) overall 1 sq. mm, 1100volts grade complete.
Wiring 3 pin 16/20 amp. power plug control and switch.
Supply and erection of PVC insulated single core copper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing.
PVC insulated copper conductor single core cable (ISI marked) overall 2.5 sq.mm, 1100volts grade.
PVC insulated copper conductor single core cable (ISI marked) overall 4 sq.mm, 1100volts grade.
Supply & erection of pipe for wiring purposes including bends, inspection boxes etc., where necessary including painting as per PWD General Specifications 2010:-
Heavy gauge welded conduit pipe 25mm dia. (ISI marked 1.60mm thick) On Surface
Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs.
Miniature circuit breaker single pole 0.5 to 4amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply
Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of imbles/lugs.GROUP-B: (Havell's, HPL, ABB, Indo Asian & other brands approved by PWD)
Miniature circuit breaker triple pole 0.5 to 4amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply.
NON-SCHEDULE ITEMS
Supplying & Fixing of General purpose tube fitting of Crompton make on wall of 1X36 W T-5 (CFL).
Providing & fixing ceilling fans standard make 1400mm sweep of cool breeze range with regulator Crompton Make.
Supplying & Fixing exhaust fan 18'' sweep of Crompton make including louver (Model T5JB1328EB) 1x28 W T-5.
Providing & Fixing MS nosing made of angle of size 30x30x3 mm with MS flat of 15x4 mm and 6 mm dia steel bar complete as per drawing and directions of Engineer-in-Charge
P/F MS angle iron nosing of size 50x50x3 mm complete in all respects forcable trenches as per drawing no. CW/DS- 2887 R-1
Providing & Fixing MS Chequred plates of 5 mm thickness complete as per directions of Engineer-in-Charge
Providing and fixing of M.S. Cable racks made out of M.S. flat 75x6 mm or M.S. angle 40x40x6 mm complete in all respects as per drawing no. CW/DS- 2887 R-1
Supplying ,Hoisting & placing of Ferro-cement trench cover, frame of size given bleow made of MS flat 50x3mm with 6mm dia bars at 4-1/2” and 9” c/c welded to flat with lifting hook as per DRG.No. CW/ DS-2537-R-5 and CS/DS -2420 –R-3 complete.-P-type trench of siz 3'4"x1'6"as per technical specificiation no.13
Supplying & Fixing Ceiling light of 42 Watt 2'x2' fittingg of Havells make.
Adjusted/Landing Rates (i/c the effect of extra carriage and difference of quarry rates wherever applicable)
Fine Sand
Cement
Steel
Coarse Sand
Crushed Bajri 12mm/13.2mm
Crushed Bajri 10mm/11.2mm
Stone ballast 40mm
Bricks
Tiles
Bidder Name
Amount in Words
ARNOULI CO OP L AND C SOCIETY LTD
The A and T Coop LC Society Ltd Patiala
THE SANT ATTAR SINGH COOP LABOUR AND CONSTRUCTION SOCIETY LTD AT BADBAR
THE SANT ATTAR SINGH COOP LABOUR AND CONSTRUCTION SOCIETY LTD AT BADBAR
ARNOULI CO OP L AND C SOCIETY LTD
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .